Resume - Offshore Production Operations & Offshore Construction Operations

Misco Jobs

Resume #81729

CONTACT INFORMATION:
View contact information...

Objective:

To obtain an experienced position with an offshore oil & gas Company, utilizing my professional and educational experiences, to achieve the business mission of the Company, in conjunction with the Company's business aim's and objective's.

Experience:

Aug. 2008 to Present Labor Finders Lafayette, La.
Skilled Laborer
Principal Responsibilities:

Tasks involving physical labor were performed. Responsible for working on buildings, highways, and construction projects, excavations, and demolition. Responsible for operating a variety of equipment including hand and power tools: air hammers, earth tampers, cement mixers, small mechanical hoists, surveying and measuring equipment. Responsible for cleaning and preparing sites, digging trenches, placed shoring to support the sides of excavations, erected scaffolding, cleaned up rubble and debris, and removed asbestos, lead, and other hazardous waste materials.

May 2008 to Aug. 2008 Shamrock Management Houma, La.

Production Operator - A EI 292
Mariner Energy
Principal Responsibilities:

* Establish monitoring and reporting system and communicate daily status/production reports to client representatives as directed by supervisor.
* Review operational/maintenance problems as well as operability of process systems and recommend remedial action if required.
* Ensure all process systems are operated within design capabilities, and monitor operating parameters to maximize production/quality making adjustments where necessary. Report unusual conditions to Mariner/Shamrock management.
* Maintain required operational log sheets, maintenance records, production data, etc.
* Monitor usage and inventory levels of consumable supplies.
* Verify emergency equipment/systems are in good operating condition.
* Conduct safety meetings daily and at the beginning of each crew change as directed by supervisor.
* Perform administrative duties in a timely and efficient manner.
* Perform good housekeeping methods on platform.
* Perform other duties as required by supervisor.
* Assist in personnel ''on the job'' training programs.

Responsible for operating production facilities with very little supervision, including but not limited to, safety, environmental, regulatory compliance's, testing, repairs and maintenance of facilities, wells, production equipment, safety equipment and devices, measuring equipment, rotating equipment, materials (shipping and receiving).

May 2007 to Mar. 2008 Island Operators Lafayette, La.

Production Operator - B Loop 23
Helis, Merit Energy, Tanner, Maritech
Principal Responsibilities:

* Establish monitoring and reporting system and communicate daily status/production reports to client representatives as directed by supervisor.
* Review operational/maintenance problems as well as operability of process systems and recommend remedial action if required.
* Ensure all process systems are operated within design capabilities, and monitor operating parameters to maximize production/quality making adjustments where necessary. Report unusual conditions to client/Island management.
* Maintain required operational log sheets, maintenance records, production data, etc.
* Monitor usage and inventory levels of consumable supplies.
* Verify emergency equipment/systems are in good operating condition.
* Conduct safety meetings daily and at the beginning of each crew change as directed by supervisor.
* Perform administrative duties in a timely and efficient manner.
* Perform good housekeeping methods on platform.
* Perform other duties as required by supervisor.
* Assist in personnel ''on the job'' training programs.

Responsible for operating production facilities with very little supervision, including but not limited to, safety, environmental, regulatory compliance's, testing, repairs and maintenance of facilities, wells, production equipment, safety equipment and devices, measuring equipment, rotating equipment, materials (shipping and receiving).

Oct. 2004 to Apr.2007 Baker Energy Lafayette, La.

Production Operator - B SMI 48- B, C, E, &F
BP Holstein, Marlin Energy, Maritech, BP Marlin

Principal Responsibilities:

* Establish monitoring and reporting system and communicate daily status/production reports to client representatives as directed by supervisor.
* Review operational/maintenance problems as well as operability of process systems and recommend remedial action if required.
* Ensure all process systems are operated within design capabilities, and monitor operating parameters to maximize production/quality making adjustments where necessary. Report unusual conditions to client/Baker management.
* Maintain required operational log sheets, maintenance records, production data, etc.
* Monitor usage and inventory levels of consumable supplies.
* Verify emergency equipment/systems are in good operating condition.
* Conduct safety meetings daily and at the beginning of each crew change as directed by supervisor.
* Perform administrative duties in a timely and efficient manner.
* Perform good housekeeping methods on platform.
* Perform other duties as required by supervisor.
* Assist in personnel ''on the job'' training programs.

Responsible for operating production facilities with very little supervision, including but not limited to, safety, environmental, regulatory compliance's, testing, repairs and maintenance of facilities, wells, production equipment, safety equipment and devices, measuring equipment, rotating equipment, materials (shipping and receiving).

Jan. 2004 to Apr. 2005 Greene's Energy Group Lafayette, La.
Operator
Responsible for operating hydro-pressure testing pumps/equipment during the construction/commissioning phase of the BP Thunderhorse project, in the McDermott shipyard, as well as the completion of the BP Thunderhorse project in the KOS shipyard. Supervised a crew of operators/helpers, and was responsible for ensuring system packages were completed in a timely manner, and all JSA's, permits, and other job related compliance issues were followed as stated by BP.
Jun. 2001 to Dec. 2003 Grambling State University/Grambling, La.
Assistant Coach/Head Strength & Conditioning Coach
Responsible for coaching the Linebacker positions with the Grambling State University Football program, utilizing innovative coaching techniques. Responsible for implementing in-season/off-season strength & conditioning program for the Grambling State University Football Program. Coordinated the annual Doug Williams Football Camp for school-aged youth during my tenure at Grambling State University.

Aug.1999 to May. 2001 St. Landry Parish Schools/Opelousas, La.

Teacher/Coach Opelousas High School
Responsible for creating and administering lesson plans in accordance with the Louisiana State Department of Education in accordance with the St. Landry Parish School System's policies and objectives. Teaching assignment was at the secondary level teaching 10th and 11th grade students. Served as the Defensive Coordinator (Football). Responsible for coaching the Linebacker positions with the Opelousas High School Football program, utilizing innovative coaching techniques. Responsible for implementing in-season/off-season strength & conditioning program for the Opelousas High School Athletic programs.

Aug. 1997 to Jul. 1999 St. Landry Parish Schools/Opelousas, La.

Teacher/Coach Northwest High School
Responsible for creating and administering lesson plans in accordance with the Louisiana State Department of Education in accordance with the St. Landry Parish School System's policies and objectives. Teaching assignment was at the secondary level teaching 10th and 11th grade students. Served as the Defensive Coordinator (Football). Responsible for coaching the Linebacker positions with the Northwest High School Football program, utilizing innovative coaching techniques. Responsible for implementing in-season/off-season strength & conditioning program for the Northwest High School Athletic programs.

May 1995 to May 1997 R&B Falcon Drilling Lafayette, La.

Roughneck/Derrickman

* Tripped pipe (consisting of using slips, tongs and elevators), lined up choke or kill manifold and made connections while drilling.
* Nippled BOP's -- up and down.

* Relieved Derrickhand in Derrick while tripping pipe or on pits while eating, assisted in mixing drilling mud or lost circulation material and chemicals, and acted as Flagger for Crane Operator or Driller when Operator couldn't see loads.
* Shaker duties: Monitored mud weight, viscosity and sand weight while drilling.
* Performed general maintenance of drawworks, rotary transmission, and rotary table oils.
* Performed chipping and painting on rig floor, loads and off-loads pipe, assists in rig movement (help with rig-up / rig-down), and rig maintenance.
* Inspected all safety equipment, TIW valve, inside BOP valve, choke manifold and accumulator unit.
* Monitored hole fill-ups while pulling out of hole, lining up trip tanks, ran air/hydraulic hoist (lowering and lifting), checked for leaks on BOP stack, and measured pipe.
* hecked snub lines, pull lines, shackles, and cable clamps to see that they were in good condition.
* Checked dies in slips and tongs, fluid level in Koomey Unit, and all safety and riding belts to make sure they were in good condition.
* Mixed sack chemicals, ran casing, tagged casing through V-door, and unhooked cables from casing, tulung and drill pipes.
* Changed drill / trip recorder and change chart.
* Responded to emergency situations including, but not limited to, wellbore influxes, hydrogen sulfide detection and major mechanical or structural failures.
* Capable of quickly evacuating the facility to avoid injury during emergencies, able to assist in rescue operations for injuries or overcome personnel.
* Assisted with repairs and maintenance of large mud pumps, shale shaker, desander, desilter, and degasser units.
* Responsible for moving joints of casing to the catwalk during casing job. Assisted with attaching casing to pick-up lines so casing could be lifted to the rig floor.
* Responsible for rolling drill pipe to or from catwalk, attaching or detaching the pick-up lines, and using drill pipe tongs, spinning chain, air spinners, slips, as well as handling drill pipe joints.

Feb. 1990 to Feb. 1996 Louisiana Army National Guard Opelousas, La. 256th Combat Engineer Battalion
Combat Engineer – E-5 (Squad Leader)
Job Duties:
Served my State of Louisiana, and my country (U.S.A.), as a Combat Engineer in the Louisiana Army National Guard. I was an integral member of a combat team (256th Combat Engineer Battalion), providing vital construction and engineering support. Through extensive Army National Guard training, we designed and built bridges, roadways, secured perimeters, and tactical firing systems under a variety of climate conditions, environments, and time constraints. My responsibilities also were to ensure safe mobility of combat teams, by locating and safely neutralizing mines and other traps.

Education:

1990 to 1993 Southern University A&M Baton Rouge, La.
1994 to 1995 Norfolk State University Norfolk, Va.
1995 B.S., Interdisciplinary Studies/Early Childhood Endorsement
Norfolk State University
2001 to 2003 Grambling State University Grambling, La.
2003 M.A., Athletic Administration - Grambling State University

Certifications:

Sub-Part O (T-2)
Water Survival
Well Control - (Basic)
First-Aid/CPR
Confined Space Entry
Crane Certification
Rigger Certification

References:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 351 to 400 of 1096)

Go to Search Parameters...

Brief Description

An experienced multi-disciplined electrical engineer with 28 years experience in the oil and gas(onshore and offshore), petrochemical, construction industry with functional expertise in project management, materials specification and procurement, sales distribution, marketing and business developm

Experienced Nine Year Superintendent Commerical / Residential

Scaffolding & Safety

Instrument Technician with 19 years experience, trade and some college. Computer literate. Can do any of maintenance, planning, construction, installation, supervision, pre-commissioning, QC, calibration, documentation, faultfinding, wiring, loop checks, and more.

Total Experience of Eighteen, encompassing as a professional experience in Project engineering for Major Construction Projects in the Middle East & India.

Heavy Lift / Rigging Superintendent, Rigging Engineer, Rigging Supervisor

Work well with others, Willing to become a leader, Able run Electrical Tools

Application for the post of Excavator Operator

Operation Manager for Corrosion Engineer & Inspector

Employed as Sales Applications Engineer, I have supplied industrial, marine, mobile construction, process plant and aerospace markets pumps, valves, hydraulic & pneumatic components and systems since 1986.

Electrical Foreman / Service Technician

I have been working in the Petro-Chemical Busines for 25 +years( construction and maintenance.) I 've been a Supervisor, Superintendent & Project Manager. Heavy expirence in Piping ,Fabrication, Rigging, I have with all disciplines.I have worked in the U.S. and abroad.

Mechanical commissioning Engineer. HNC & ONC Mechanical Engineering. Experienced Project Manager,Supervisor and Technical Engineer.

Heavy Equipment operator/ Supervisor ready for a new challange

Offshore Production Operations & Offshore Construction Operations

Mechanical maintenance equipment of all types

15 years of experience in design, technical assistance and consultancy for railways, highways, motorways, bridges, metallic structures, consolidation of slopes, arrangement of platforms. Experience in setting out, cost estimates and materials engineer.

I have expertise in general operations, contract administration, budgeting and human resources, among others. I have years of experience working with the public, business owners, managers and government officials. In addition, I have on-the-ground experience in public works, drilling and pipelines.

Qualified and Certified NCCCO Operator with all endorsements willing to travel

troubleshoot and repair mining equipment,Electrical,hydraulic,mechanical,welding

Qualified heavy diesel machanic

More than 15 years of environmental / safety experience in mining industry; 1.5 years of experience in exploration by drilling as geologist; 2.5 years of experience in exploration by drilling as environmental / safety specialist

Free! Telecom and electronic engineer, specializing in RF, with over twenty years worldwide experience.

I am a Piping / Pipeline Construction Manager or Superintendent in the Oil and Gas Sectors, I have a wide and varied experience of overseas Projects, with expeience of Construction, Maintenenance and Production work on and offshore.

OFFSHORE C & I

QualificationsI have worked in the repair related field for over 23 years. I owned and ran a repair shop for the last 13 years working on both gas and diesel repairs. I managed between 10 to 15 employees year round as well as the day to day operations of the business.

Equipment Operator experienced with dozers, graders, scrapers, and snow removal.

9 years operating cranes (stevedoring); 1 year marine construction

Supervisor Mechanical,Supervisor Turbines,Mechanical Technician,DCS Operator,Turbine Technician

Project Engineer - Electrical Electrical Engineer with (15) years of experience in multi national projects in India (4 years) and Middle East Power projects (11years) Construction and Project Management field especially in High Voltage Substations and Power Station environment

Landscape Architecture, Designer, Autocad Draftsman

Looking for career enrichment opportunities in Sales & Marketing, Business Development, Technical Services, Operational Manager, or Telecom commercial consultant with a frontline organization

I have a wide on and offshore range of experience in heavy equipment installation, commissioning and maintenance. Managing and supervising day-to-day preventive maintenance.

India if any suitable post for me sent mail

electrician ph.770-969-8211

Experienced equipment operator, mechanic, welder looking for a good company that appreciates skill and commitment.

Designing, putting on service and managing 9 years whole logistics of implementation a national network for 10 billion clients

Lead Instrumentation Technician

Free! Qualifications - 500 Ton Master Oceans Inspected- 1600 Ton Master Fishing Vessels Oceans - 3000 ITC Master Fishing Vessels Oceans - Able Bodied Seaman Unlimited -ARPA STCW Certified HazWoper TWIC

Pipe Fitter, Foreman, General Foreman.

I am a qualified Heavy Duty Vehicles driver, Crane Operator as well as a mechanic. I have a vast eperience of 21 years in managing heavy equipments including cranes, Trucks, Trawlers and Bull-Dozers. I had been working working as a workshop incharge in UAE Armed Forces.

boilermaker with fitting and welding experience in mining ,construction and hydraulics

I am a surveyor looking for a rewarding job.

30 years experience in the industry and a seasoned expat, last position held was the turnover coordinator for the Washington Group in Northern Alberta, Canada. Also spent 4 years in Baku, Azerbaijan as the senior electrical commissioning eng.

Instrument Technician / Qc

20+ yrs experience surface and DTH

I am a second year electrician. I am legally allowed to work in Canada and the United States. I am looking for work in oil, gas, construction, mining.

360 excavator operator with 8 years experience

Knowledge in operating the electrical equipments

Technical Author, Trainer, Project Manager

1 2 3 4 5 6 7 [ 8 ] 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out