Resume - Steward, Strong Organized Working Foreman, CNC Operator / Programmer, Fitter/Wel...

Misco Jobs

Resume #82940

CONTACT INFORMATION:
View contact information...

Skilled in the following trades;
Strong Organized Working Foreman
CNC Operator / Programmer
Fitter / Welder
Iron Worker
Millwright
Shop Machinery Operator
Material Handler / Inventory Auditor
Maintenance / Repair Technician
Entry Level CAD Draftsman
Computer Tech (I am MCSE certified)
Web Designer
Network Administrator (.net, PHP5 MySQL, database implication, backup, monitoring and design, Corn Jobs, Perl interface and Apache table structures,)

SPECIAL QUALIFICATIONS;
* Advanced in plumbing, electrical wiring repair, and construction processes.
* Advanced in HVAC repair.
* ASME certified welder: (Experience in MIG, TIG, Stick, Heliarc)
* The making of specialty metal tooling to make work more efficient: (leverage keys, jigs, tack plates, dawgs/wedges ect.)
* Material Handling and Inventory:
* Read and Study of Blue-Prints: (lengths, widths, angles, slope-angles, weld type, weld placement, weld shrinkage, weld size, weld penetration, finishing grinding)
* Shop math: (Finding square, dividing radiuses, calculating slopes and loads, math conversions)
* Efficient in reading: (tape measures, micrometers, various calipers, dial indicators, feeler gauges, laser measuring equipment)
* Knowledge of various ISO 9000 and 9001 processes dealing with metal construction.
* Extensive use of hand held plasma cutter plus oxy-acetylene.
* CNC Plasma Table Operator: (cut preseason pieces)
* CNC Machinery Operator: (laths and milling machines)
* Overhead Crane Operator up to 50 tons: (magnetic and vacuum)
* Load Rigger: (use of straps, chain straps and spreaders to safety host heavy objects)
* Fork Lift, Fork Truck, Backhoe, Man lifts up to 125 foot, man basket experience:
* Metal cutting and forming skills:
* Sheet Metal cutting and forming skills:
* Managerial Skills:
* Supporter of other employees:
* Safety Orientated:
*

WORK HISTORY:

1993/1997 Welder/Fitter - CNC Plasma Operator
Butler Manufacturing Company
IH 35 San Marcos, TX. 78666
(512) 353-6100

Duties: Certified welder, Fitter, CNC Plasma Table Operator.
Brief Description of responsibilities:
Butler is the leading manufacturer of pre-fab metal buildings.
As Fitter/Welder:
I Read and Study blue-prints, Weld and fit end plates to structural components, Find any defect in component and finish weld, grinding and truing each component, Each component had to be finished and ready for the Paint Shop with my stamp and the of another welder which checked off on my work. I also checked the work of my co-workers and stamped off on their components only after: I looked at each weld for size, undercut, and porosity. Take measurements of components, length, width, hole placement, hole size, and straightness which had to be within a 1/16th of an inch from blue-prints. Attended bi-weekly safely class meetings, I always looked out for the safety of myself and my co-workers, and reported any unsafe practices and equipment to shop foreman. Work space clean-up after each shift. Maintenance on welding equipment, such as replacing 100lb coils of welding wire, nozzle and tip replacement, gun tare-down and replacement of gas tub, wire tub, and gun parts that would ware out.
As plasma operator:
I operated and maintained a dual cutting head CNC controlled Plasma Table cutting machine. Ordered metal from yard to make webs, flanges, and any other specialty parts to tolerances of 1/32nd. Kept logs of material, material used, material returned, drop material, and parts made. Programmed machine to cut each piece as said per blue-print. Used magnetic and vacuum over head cranes to move material. Made sure that parts came out on time and in order. Looked after the rest of the line which included: a flange hole punch operator, web to flange tack station, and sub-arc welder operator. I'd make sure pieces were in order and on time to be shipped to weld shop for finishing.
Contributions and learning experiences:
While at Butler I seen the company go through many changes. I was hired for a new program that would teach welders in house with teachers from different tech-schools from the Austin TX area. I received a four week in class welding, before starting. I apprenticed for six months with an experienced welder before setting off on my own. I seen butler go through a total tool remodel, and was chosen to learn how to operate the new CNC plasma machine, since I'd had shown computer experience and good organizational skills. While operating the plasma machine, I made many specialty parts that were used in the remodel such as: a fifty foot paint dip tank, large shelves that holds crates of metal siding material, roller conveyer systems, weld station tools, and paint booth parts just to name a few. Butler held bi-weekly safety class meetings were I've learned many important safely practices. I enjoyed this job very much and took pride in the pieces I made.
Reasons for leaving:
I gave Butler a three week notice. My farther pasted away and I decided to take over Dockside Restaurant so it wouldn't go out of business. Before I left, I trained my replacement for the plasma table.

1997-2000 Owner: Dockside Bar & Grill
420 W. Cotter Port Aransas, TX. 78373
Copy of sale tax forms available

Duties: All aspects of owning, running, and maintaining a business.
Brief description of responsibilities:
Manger/Owner; Make sure customers are satisfied, Recruit and Dismiss employees, Ordering all inventory (dealing with food salespeople, restaurant equipment salespeople, to building contractors), Oversee work, cleaning and organizational practices of work staff, Staff meetings, Staff reprimands, Scheduling, Profit & Loss statements, Staff and inventory control i.e.. Not to go over set budget, prepared weekly payroll, keep daily books, calculate estimated quartile income tax, sales tax, bar tax, 941, 940, Kept track of payments due. Prepared income tax forms with the aid of my accountant.
Contributions and learning experiences:
I took over the business after my father passed away. Instead of letting the family business shut down, I decided I would take the business over.
The building was in very bad disrepair when I took it over, and needed many repairs/improvements. I remodeled the business acting as my own sub-contractor, pulled all the local building permits using contractors to do the jobs I wasn't qualified to undertake..
I have had many positive learning experiences throughout my ownership of the business. I have kept my "building" desire by remodeling and maintaining the building and the equipment. I've learned how businesses work and the time involved running one. I have learned how to get along with all sorts of people and attitudes. I have learned leadership skills that my staff would fallow and rarely had any problems. I think the most important thing I've learned is to be a part of the business not just an employee.
Reason for Leaving:
Divorce forced sale. I sold the business to my family.

12/1/00-2/15/01 Major Maintenance - City of Corpus Christi
Waste Water Department
Director
Foster Crowell
361 857 1800

Duties: Worked on one of the four maintenance crews that serviced all of Corpus
Christi's waste water plants. I worked as a welder on my crew.
Brief description of responsibilities:
Welder/Maintenance Crew, Fabricate and install a parts to keep plants in operation. Perform maintenance on city wide lift stations this includes pipes, pumps, valves, and lift station structure. Perform Maintenance at waste water plants that included, replacing sections on pipes, valves, cast pipe sections, maintained and rebuilt, valves, many different types of electric pumps and blower pumps, conveyer belt systems, standard plumbing and wiring of all rebuilt and new equipment. Operated winch truck to remove larger pumps and valves almost on a daily bias.
Contributions and learning experiences:
I've learned more about electrical wiring I have no problem working with three phase or working on electric equipment, plus Heavy-duty valves. Preventive maintenance and personal safety
Reason for Leaving:
I left the city because the work conditions were too unsafe working around waste water, I was also offered a better wage and safer work conditions with another company.

2/16/01 - 4/25/01 Welder/Fabrication Forman - Gaiter Steel
Orange Grove, TX
Cole Browning "out of business"

Duties: Foreman of ten man crew, Welder plus fabricating and erection of metal buildings.
Made and installed beams, metal siding, door jams, window frames, and insulation. Used cranes, forklifts, and bucket cranes to install beams, and metal siding as long as 30 foot. Performed daily maintenance on welding equipment, heavy equipment and tools. Set up jobs for the other workers to perform for that day and made sure it was getting done on time.
Contributions and learning experiences:
Since working for butler manufacturing I am well versed on this type of this construction.
Reason for Leaving:
I left to try and open a restaurant.

2001-2003 Owner: Goodfellas Winery
5117 Webber Road Corpus Christi, TX.
Copy of sale tax forms available

I decided to try and open a restaurant in Corpus Christi. I spend over six months remodeling and opening this restaurant. I went through all the aspects of running this business from start to finish. I pulled all city permits in order to complete this work.
I personally remodel that restaurant with my own time and money.
Contributions and learning experiences:
I will never open another restaurant.
Reason for Leaving:
I was certain with my experience, that I could do good business there. Do to major road work in front of the business at the time the business was open it just couldn't sustain it's self, so I decided to close it...

2003-2004 Gulf Copper Ship Repair
4721 E Navigation Blvd Corpus Christi, TX
(361) 883-1040 Aransas Pass Location, Please speak to Lorenzo the head foreman.

Duties: I worked as a welder, ship fitter, valve mechanic.
Brief description of responsibilities:
Gulf Chopper is a ship repair facially that services naval station Ingleside's fleet of mine sweeper ships, and other privately owned large vessels. Gulf chopper has a floating boat dock, which was a 1942 Navy repair ship.
It was my duty to maintain this ship to strict navel codes. I would actually take pieces of rusted metal (I-beam, plate steel and pipe) from the ship and replace them; this was all inspected by the Navy.
I also worked on valves though out the ship and exercised them regularly. The valves sink the dry dock so the lager boat can be lifted out of the water, it was very interesting.
Contributions and learning experiences:
While there I learned many new fabrication skills they follow ISO9000:2000 I learned tig welding on presser vessels, joining chopper/nickel piping, and high quality heliarc welding,
Reason for Leaving:
Well I really liked this job, but it required me to work 84 hours a week, It was really affecting my family life.
There was also a very bad heath risk, many time I was welding in confined spaces after several months I could feel the effects from this, it was a hard decision but my health come first.

2004 - 2006 Lead Dock Builder
Grendwald Construction Company
Aransas Pass:

Duties: Crew foreman that builds boat docks at homes near the water.
Brief description of responsibilities:
Build custom boat docks, disassemble old docks then dispose of old materials. Set up for new dock, this includes preparing the site to get a reference so new dock comes out level. Unload wooden pilings that are eight inches by eight inches then rig them in the winch. These pilings must be set to hold the dock in place which means they are sunk under water using a jet hose.
Once dock is almost completed a boat lift is installed to lift boats out of the water.
This is not a easy job, the wood that is used is treated to expel the elements so it is very heavy, and I must life over 100lbs on a daily basis,
Reason for Leaving:
I left because this is a friends business and I just started to help him out. After two years working full time I never got a raise and wasn't making enough to support my family and working for friend is not good at all, but we remain friends.

2006-2008 Lead Dock Builder
Smart Docks Inc. www.smartdocks.com
Aransas Pass
Duties: Crew foreman that builds boat docks at homes near the water
Brief description of responsibilities:
Build custom boat docks, disassemble old docks then dispose of old material. Set up for new dock, this includes preparing the site to get a reference so new dock comes out level. Unload wooden pilings that are eight inches by eight inches by twenty foot then rig them in the winch. These pilings then must be set to hold the dock in place which means they are sunk under water using a jet hose and a lot of muscle to set them in place. I would keep inventory and order what was needed for get job.
Once dock is almost completed a boat lift is installed to lift boats out of the water.
Contributions and learning experiences:
When I started there were two workers, I worked with the owner and got another boat and crew in the water, then a third. I worked very hard keeping things together, and sadly after I departed they lost two of those crews. I also did all of the welding and maintenance work on the boats plus shop equipment.
If you look at their web site I built most of the docks.
Reason for Leaving:
I left because I've worked for them for two years and my paid is not much more than the job I had with Grendwald Construction Company and my bills were not being met therefore I must find other employment.

On a personal note:
I work really well with others, people tend to follow me and ask for my advice. I am very straight forward and I can keep people around by making the work day more interesting and solving a lot of turnover problems before they begin. I was taught this by my father, and has helped me gain many friends.
I watch over my other co workers, my motto is safety can always be improved. I have every good writing skills, and enjoy teaching people new trades. I always have the company's best interests on the top of my mind and always look for improvements, time is money.
I have loads of computer experience, while working for Butler I was also enrolled at South West Texas University my major was computer science; my minor was computer information services. After leaving college and Builder, I never perused it further. I do as a hobby design web sites and write electronic repair manuals. I constantly learn new programming languages and as of now the sites I operate pay the bills. I have also come of age so to speak, I'm now 35yrs old, I have had lots of opportunities in my life to go out and make a few mistakes, dealings with all kinds of people, I have become very electronically and mechanically inclined, I always listen to people that have more skills than I. I strive for perfection, both out of myself and install this into my co-works. When I work for a business that business does well, I believe a job worth doing is worth doing right, customer service is key, and in a lot of situations the after care of customers is just as important as the building for that relationship.
I believe I have a lot to offer a business that uses the skills mentioned above. If that business is Safety orientated, well organized, sets goals and always tries to improve it's day to day operations would win me over.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 101 to 150 of 1093)

Go to Search Parameters...

Brief Description

Graduate Civil Engineer from a reputed institution of India having experience in Quantity Survey & Contracts in projects across the Gulf, currently working with one of the premier infrastructure companies of the Middle East, seeking suitable long term career opportunities.

20 plus years of experience in all aspects of the electrical field, last 17 in Industrial work.

Maintenance Specialist

To secure a challenging and rewarding career in the Electronic Repair Industry that puts emphasis on increasing responsibilities, personal growth, professional achievement, continued education and a company that offers opportunities for career advancement.

A dedicated, committed individual who is both practical and adaptable positive and versatile a self-starter with an ability to motivate individuals to achieve results a team player. Years of experience in the industry, available for work anywhere, longing to work oversea's, reliable and felxible.

I am proficient in installation, troubleshooting and repair of electrical eqiupment.I can read prints and wiring diagrams. I am skilled in the use of electrical test equipment and electrical tools of the trade. I have WY, and MT master electrical license.

Diploma mechanical eng.

CA State Certified General Electrician(Journeyman) with some Instrumentation training in Process Controls

Construction Superintendent

Construction Laborer Expert 0-2 years Customer Service Face-to-Face Support Expert 10+ years Engineering Applications / Technical Support Strong 5-10 years Engineering Electrical Strong 5-10 years Engineering Field Service Expert 10+ years Engineering Maintenance Expert 5-10 years

Im presently building 2 land rigs for Arabian Drilling company, and have been employed by ADC for 7 years,as a senior chief mechanic. I am trying to get involved in a more technically advanced environment. I would be prepared to come and do a trail period on my days off.

I am a multi field Estimator, Designer and Project manager, Electrical and Mechanical is my best fields, working knowledge of structural steel, concrete, IT and plumbing. I have designed and installed Power Distribution and generator systems. Safety and code compliance is a must.

I have 20+ years as a Welder. I have numerous certifications in Welding Procedures. I am willing to relocate and/or travel.

Moving to Georgia Thomaston Area need work.. by 4/01/04

Crane Operator

Over 23 yrs of heavy earth field mechanic. AAS in Heavy equipment and diesel Technology. Lack final semester for BA in Training Industry & Business. CAT and Kamatsu trained.

I can offer extensive supervisory experience in the oil and gas industry,

30 years experience in all types of heavy industry,the equipment used,predominately in coatings and linings. Experienced in all phases of construction projects. Supervised numerous larger projects,overseen and implimented safety, inspection.

Experienced Maintenance Mechanic/Welder with twenty-five years in the maintenance field. Skilled in all types of mechanical work- hydraulic, pneumatic, conveying systems

I am looking for a full time work, anywhere

Experienced electrician looking for full time employment.

Results oriented computer technician. Background includes seven years of experience in installation, testing, upgrading, configuration, troubleshooting, support, and maintenance of LANs, WAPs, and applications software and hardware devices.

Challenging and rewarding position in growth-oriented organization which offers diverse job responsibilities in vehicle maintenance and will fully utilize both my technical and managerial abilities.

4 years experience in Quantity Surveying, also exposed in construction management works.

Safe Operation of Cranes to 300 Tons

Below is my resume, it will show that I have worked in the United States as a pipefitter for over 20 years. I am interested in working overseas on a job in-which my wife can accompany me.

Have substantial supervisory experience in the maintenance of Heavy equipment, work well with in a team. My leadership skills are excellent and I have very good communication skills. Computer literacy is very proficient.

21 years in construction

Multi-skilled Individual seeking long term employment with company that has stability, and is committed to caring for its employees.

Electrician

Experienced project manager in landscape sectors, 25 years practical management experience in commercial and residential fields including high-end, M.Sc. and B.Sc. horticulture, M.B.A. pending

Have 10 years experience in Majour Industrial Steel Processing Plant in Saldanha, South Africa doing Hydraulic maintenance. Have been doing all buying and selling and sourcing of goods over internet. Also went to site to do job estimations and Representative work. Did Offshore Survival course

Safety Officer, Mechenical / Electrical, 10 years exp

Project Manager/ Superitendent/Estimator

construction laborer/ operator -10 years experience- very dependable

Servicing and Repairing Electrical and Electronic Equipments. I have a Diploma in Electrical Engineering, a New Zealand Trade Certificate in Electrical Theory and Practice, and a New Zealand Registered Practicing Licence

Interested in Construction jobs.

Unlimited Welding Cert-(SMAW)/ 1/2" Dual Shield wire cert/ Pattern Layout/Parallel development

Excavator, Showell, Dozzer etc. heavy machinery operator with 15 years of experience worked in India, Iraq, Kuwait, Dubai, Saudi-Arabia and Oman.

Advanced air diver, subsea construction, wet welding, all aspects of construction, top notch employee.

Masters degree in Management, 22years heavy construction

Welder Fabricator/Plumber/Carpenter/Painting/NDT.None Destractive Testing

Construction manager /Foreman/carpentry background/Marine experiance

Superintendent Supervisor Manager

4 years hand on working in Pipe Manufacturing Plant Offshore and Water Injection Pump related to a medium and large engineering and construction project with client and engineering contractors. Extensive experience in Civil Work, Quality Control Inspection and operating computerized Document Control

Site safety inspection • Driving • Basic Investigation • Knowledge in Basic programming such as C++ and Visual basic and manipulating software in designing such as adobe photoshop and macromedia flash • Basic knowledge in PC troubleshooting • Can communicate with all types of people • Mange to wor

Electrical foreman, superintendent, master electrician. Very familiar with NEC

Industrial Journeyman Electrician-28 years

Steward, Strong Organized Working Foreman, CNC Operator / Programmer, Fitter/Welder, Iron Worker, Millwright, Shop Machinery Operator, Material Handler / Inventory Auditor, Maintenance / Repair Technician, Entry Level CAD Draftsman Computer Tech, Network Administrator

MicroStation 3D Modeler

1 2 [ 3 ] 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out