Resume - I&C Technician with geothermal experience

Misco Jobs

Resume #84151

CONTACT INFORMATION:
View contact information...

Experience

8/2006 ¡V 11/2008
Fagen Incorperated Granite Falls, Mn.
Startup and Commissioning Corporate Representative

Successful check out, startup and commissioning of 12 ethanol plants totaling nearly 1 billion gallons per year capacity.

Activities and responsibilities included:
„« DCS programming verification and modification/correction feedback
„« DCS network functionality including fiber optics
„« DCS I/O loop checkout
„« Mechanical functional checkout of all rotating equipment
„« VFD programming
„« Tank farm, plant vessels, and piping system water trials
„« Calibration and functionality of all field devices such as transmitters, valve actuators, sensors and switches
„« Plant maintenance personnel training
„« Plant startup and performance run

2004 to 2006
Cal Energy, MidAmerican Energy Company. Calipatria Ca.
I&C/DCS Technician
Instrumentation and DCS support for 13 generating units in 6 geothermal power plants. Designed and installed a fully documenting automatic pressure calibration system using Druck hardware and GE Sensing InteCal software. Configured 3000 plus instrument database and trained I&C technicians on use of system.

Systems supported and other responsibilities:
„« Foxboro I/A DCS running on Sun Unix platforms
„« Emerson Delta V DCS running on Microsoft NT4
„« Woodward Governor, Triconix, and Mitsubishi governor control systems
„« Fuji, Westinghouse, Mitsubishi and GE steam turbines
„« Bently Nevada temperature and vibration monitoring systems
„« RTX and Hathaway plant data logging systems
„« Root Cause analysis of turbine trips and equipment failures
„« PLC and ModBus SCADA systems
„« I&C maintenance, repair and calibration on all field devices including transmitters, Hart and FieldBus devices, valves, hydraulics, etc.

2001 to 2004
Champion Systems, Jamestown N.C.
HVAC Control System Engineer

Activities included:
„« HVAC control system engineering and design
„« Hardware specification and engineering submittals
„« DDC control system software logic design for chillers, boilers, air handlers, cooling towers and pumping systems using Delta Control software
„« Computer HMI screen design using Delta Control Orca View software
„« BacNet configuration and device networking checkout and startup
„« System installation, checkout and commissioning.
„« Customer training, drawings and O&M manuals

1998 to 2001
Systemation, Applied Services Division, Fairport N.Y.
Systems Integrator

Successful systems upgrade at the Rochester NY Van Lear WWTP included three Flottweg centrifuges for sludge dewatering. Binghamton ¡V Johnson City WWTP plant wide upgrade including new odor control building.

Supported systems and activities:
„« Citec software
„« Opto22 I/O
„« Modicon PLC's
„« Provided Foxboro factory trained field services
„« Supported Sales division with field services

1985 to 1998
Total Control System Services, Inc., Varysburg N.Y.
Part Owner

Started and grew business supporting 5 full time employes.

„« General business management
„« Manufacturer's representative for several major lines of instrumentation
„« Repair, calibration, maintenance, installation and start up of instrumentation and control systems
„« Provided technicians for plant shutdowns and outages

The Foxboro Co., Foxboro, MA.
Systems Analyst

Commissioning of upgraded (pneumatic to electronic) reactor vessel cooling system, Yankee Atomic Electric, Rowe Ma. Checkout and startup of Niagara Mohawk Unit 7 Oswego NY Steam Plant.

Activities:
„« Provided field services for entire Foxboro product line
„« Specialized in power system and boiler control system start up and commissioning for utility and industrial fossil fuel applications.

Education
A.A.S. Electrical Technology, Erie Community College, Williamsville, N.Y.
Additional course work
Invensys Triconix System Maintenance for turbine controls
Foxboro I/A System Maintenance 2005
CiTec software configuration
Delta Controls OrcaView software configuration
BacNET configuration
BJ Systems Software (QNX) for process control
Foxboro/Eckhardt control valve sizing and specifying school
Foxboro Service Representative Power Systems Course for boiler and combustion control and commissioning
Foxboro Users course on power systems and boiler control
Foxboro Service Representative Training School
Foxboro Spec200, VideoSpec/MicroSpec, VideoSpec4, Spectrum DCS, Fox3/Fox300 and Foxboro scaling course for process control.

Licenses
F.C.C. General Radio Operator license (Old FCC First Class Commercial)
F.C.C. Amateur Radio License Advanced

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 301 to 350 of 1093)

Go to Search Parameters...

Brief Description

Contract Safety and Construction Inspector for companies ,such as Conoco Phillips and Shell

Objective: My main objective has always been to construct any job in a timely manner, excellent quality, and safety conscience. I like to work about 20 hours a week overtime, and I feel like I have gone as far with this company as possible.

Over ten-years of progressive experience and responsibility in the areas of Heavy Equipment Operation & Landscaping at various organizational levels

Heavy Equipment Operator to include Mobil Cranes, Crawler Cranes, Overhead Cranes, Forklifts, and Tractor/Trailer

DCS and instruments el.engineer.International experience.Experience in Chemical,mainly in Pulp and Paper (equipment-similar to used in Oil&Gas,Cement,Fertilizers,etc)Industry

Jouryneyman Millwright - Alignment Specialist - Lazer, Reverse and Rim& Face. I have installed and rebuilt steam and gas turbines, crushers,conveyors, ball and sag mills, tower mills, pumps, compressors, blowers.

12 years experience in all aspects of telecommunications. Excellent written and communication skills. Highly organized. Ability to work on multiple assignments. Excellent problem solving skills. Able to meet deadlines and schedules. Start of to completion of projects to include ordering, insta

Experienced frame and finish carpenter with cabinet experience and management experience

I have electrical trade certificate holder, and I have more than ten years of experience in maintenance, installation, repair, fault finding of electrical equipment, laying UG cable to connect main switch gear, and maintenance of HT LINE transformer line

I am a highly experienced and skilled senior service person. I have many years experience as a expatriate including working in what are considered 'hardship' postings. I am Caterpillar dealer trained, but have recently been working in open cast mines, both coal and gold, in Africa and Asia.

ASE CERTIFICATIONS: Drive Train / Engine Repair / Manual Drive Train / Axles / Suspension / Steering / Brakes / Fuel Line Distribution / Heavy / Medium Truck Technician.

HVAC Skills

MBA and graduate Electrical Engineer with 19 years experience in EHV installations. Specialized in O&M and Project Management of mega projects like power, steel, refinery, etc.

Red Seal/Interprovincial Journeyman Welder with B-Pressure equivalent & CWB certification

Welder, Mechanic with experience in transmissions, engines and hydraulics. Also experienced in portable line boring.

Caterpillar Dealership, Surface and Undergound Mining Experience.

Free! As a thorough and outgoing leader known for getting the job done, I am committed to the highest performance and standards. I draw out the best in others, bringing quick resolution to challenging situations. I take good care of my teams, treating them with respect and training them for success.

Truck Driver/ Construction Superintendent /Customer serves /Quality /Safety Inspector

Looking for a plumbing position overseas

CAD Manager for Microstation and AutoCAD

An experienced E&I construction supervisor/superintendent, three years college to city&guilds grade,five year apprenticeship, experienced in onshore and offshore E&I construction and maintenance, excellent communicator

Rigger

Operating all sizes and makes of excavators,dozers,backhoes,front end loaders,track loaders,scrappers,rollers,skidsters,mini hoes,bobcats,small blade,boom trucks,and hydro axe.Able to obtain all info. from blue prints and/or site plans.Capable of passing inspections foundation,building,and final.

Qualified Electrian in UK, Worked in Petro-Chemical Industry, Supervisor, Electrical Consultant for large Bank

CISRS Registered Advanced Scaffolder, CITB Registered Advanced Scaffolder, Brunei Shell Worksite Supervisor Cert, CITB Inspection Cert, ECITB Passport to Safety.

COATING INSPECTOR CV

Instrument Supervisor

I HAVE BEEN INVOLVED WITH EQUIPMENT MAINTAINENCE ALL OF MY LIFE,AG/CONST BACKROUND 10 YEARS HEAVY EQUIPMENT EXPIERENCE 6 AS A FIELD TECH. LOOKING FOR AN OVERSEAS OPP.

Over 30 years of permanent and contract positions in design, operation, construction and pre-commissioning of Marine, Oil & Gas, Chemical and Offshore projects in the U.K., Canada, USA and the Middle East

30+ yrs in heavy equipment of all types, mostly friction cranes, draglines, etc.

I know I could be a good asset to your company. I have 9 years of experience working in commercial, industrial. I have skills in various fields such as electronics, PLC work, carpentry, masonary, concrete work, mechanics, welding, and fabrication.

Electrician who posseses a wide variety of electrical knowledge

Boilermaker/welder, nonslewing crane ticket, dogman, side loading crane ticket, cert2 in fire and rescue, cert3 in mines rescue.

Electrical Construction Supervisor, Electrical Superintendent, Project Management experience, 20 years experience, petrochemical, Power plant, Pupl & Paper,Hv Lv, Instrumentation, Project planning, Estimating & Tendering, HSE competent,

Front line supervisor, to train the trainer, mine development jumbo lead hand, OH@S,first aid certificate

Senior Mechanical Draughtsman(MEP)

I have multiple years of mining and heavy equipment operator experience. I am looking for a full time position.

Mechanical Fitter with 8 years of Experience

to obtaian a job

I've been working in the diesel business for over 10 years. I do everything from general maintenance to major rebuilds. From office type work to operating equipment when need be.

I have been working in the mine industry for the past 30 years. Recently reassigned to site services for DeBeers Canada Snap Lake Project. Currently gaining experience on the several sizes of Komatsu loaders, Bobcat, Dozers, Water and Fuel Truck.

Many years of experience, very detailed orientated.

Twenty plus years of experience in electrical construction, maintenance. International experience in Middle East and South America. Willing to discuss any and all opportunities available.

I&C Technician with geothermal experience

Objective: To work for a company as a Supervisor/Foreman/Journeyman carpenter. To use my skills to the best of my ability.

Construction Supervisor for Electrical and Instrumentation

Recent graduate with a Bachelor of Applied Science in Instrumentation seeking employment for supervisor positions within the instrumentation field or as an E & I Specialist.

welder helper \ carpenters helper

Versatile, knowledgeable, exploration geologist

An experienced multi-disciplined electrical engineer with 28 years experience in the oil and gas(onshore and offshore), petrochemical, construction industry with functional expertise in project management, materials specification and procurement, sales distribution, marketing and business developm

1 2 3 4 5 6 [ 7 ] 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out