Misco Jobs	|  Go to Job Seeker's Center »»   |
	«« previous resume Resume #84416 next resume »» CONTACT INFORMATION: View contact information... Date of Birth: 12.01.1956 Nationality: Romanian Marital Status: Married; two children Languages: English, Italian Hobbies: DIY, Electronics Qualification: Degree in Instrumentation and Control, University of Bucharest, 1986 Industrial High School of Automatics, 1979 Personal skills: * Self reliant, reliable self starter * Team worker with good Supervisory skills * IT skills – Word, Excel, etc. * Pre-commissioning, Commissioning and Start-up * Maintenance planning * QA / QC activity * Experience in risk and hazard analysis Instrumentation experience: * Circa 30 years work experience (13 years Middle-East / Africa) * I & C Engineer – Oil and Gas Industry * Field experience in construction & commissioning * Installation of all instruments & control equipment * DCS, PLC- System installation * Configuration and loop test * Plant Maintenance Supervisor / Engineer * Wide knowledge of process instrumentation and control * Supervision of I & C subcontractors Nov.2006- at present Company: AMEC UK Location: Libya Position: Instrument Engineer - working for the Client Zueitina Oil Co. Responsibilities: Overall construction – installation activities and commissioning support of the following Zueitina projects: * Fire Protection and Alarm System at 103D * Instrument Upgrade- New Control System for Gas Injection Train 3 & 4 at 103D-Scada System * Instrument Upgrade- New Control System for Compressor 23K6 at 103D * Siemens Gas Turbine – New Power Pack 2 units at 103A * Siemens Gas Turbine – New Power Pack 2 units at 103D * ABB-DCS installation and commissioning atTerminal Oil Movement & Alderley Metering System/CCS Technology Upgrade for Cargo Loading Pumps My duties include: * Carrying out surveys of plant & buildings in relation to existing or proposed instrumentation and controls. Writing of reports. * Liaison with Operations & Maintenance staff, as per Construction Manager instructions. * Checking of project related drawings & documents for compliance with site requirements. * Inspection of project materials, including impulse piping, cables, enclosures, and all related fixings, labels, brackets, frames, terminations, etc. which have been supplied by Contractors or directly purchased by the Company. Inspection of storage conditions for materials. * Following the construction works on site, and checking status reports and progress reports which the Contractors have prepared. Inspecting the finished works and advising the Construction Supervisor of any instrument related problems, and of possible techniques for resolving these problems. Testing and Calibration equipment and procedures. * Familiarisation and compliance with Company rules and procedures. May 2006- Oct.2006 Company: JGC Middle East FZE Project: Dolphin Onshore Facilities Project Ras Laffan Industrial City, Qatar Position: QA / QC Instrument Inspector Responsibilities: * Reviewing of all ITP's/QCP/Method Statement/ Material Approval prior to project plan preparation. * Coordinating project plan with Construction Supervisor. Review of AFC drawings. * Weekly meeting concerning the activities scheduled as per the project plan, and the resources (man / materials / equipment) required to carry these out. * Assigned to Review all Subcontractor Technical Documentation prior to circulation or submission to Client. * Ensuring instrument works complied with project specifications, company procedures, method statements and quality assurance and control documentation (strictly implementing the ISO 2000 and ISO 9000). * Supervising and monitoring the inspection on-site and calibration, to meet project deadlines. * Monitoring all subcontractor activity prior to start of Instrumentation Workload. * Scrutinized every area to be inspected prior to RFI by the main Client. * Witnessing repair and calibration of instrumentation, and commissioning of the following equipment: Smart Flow, pressure, temperature, level transmitters, different control valves, pressure gauges and Fire & Gas alarms. * Analogue and digital controllers Fire&Gas detection/protection systems, * ESD (Emergency shutdown), Pneumatic and hydraulic shutdown panels and control systems. * Project Duties included review of loop folders for final acceptance by the QA/QC Dept. before transferring to Commissioning. * Inspection of vendor skids before final acceptance by client. * On-site audits of subcontractor. * Following all safety practices and procedures and correcting of unsafe work practices * Fully conversant with relevant International (ANSI, ASTM, API, BSI, IP, ISO, IEC, IEEE, SPs / ERDs and DEPs), etc. standards. Oct. 2005 – February 2006 Company: JAPAN GAS CORPORATION (J.G.C) Location: SOHAR REFINERY COMPANY / SOHAR - SULTANATE OF OMAN Position: Instrument engineer Coordination of Instrument Punch List between sub-contractor and Client. Also coordination between sub-contractor regarding the Inspection and Test Reports documentation related to instrumentation. April 2005 – September 2005 Project - Bu Hasa facilities Development Project, Abu Dhabi –UAE Company - Abu Dhabi Company for Onshore Oil Operations Contractor - Snamprogetti, Italy Client - ADCO Position -Instrument /Automation engineer Supervising and coordination of engineering, construction, pre-commissioning activities for instrumentation. July 2004 - March 2005 KINGDOM SAUDI ARABIA-Aramco-Berri gas plant- Position - I & C Engineer - Construction, pre-commissioning, commissioning and maintenance during start-up. October 2003 – June 2004 SIRTE OIL COMPANY- LIBYA- Attahaddy gas field Instrument engineer – Commissioning and start-up team –DCS-ABB 2000. May 2002 – April 2003 TSKJ BONNY ISLAND (NIGERIA LTD) Instrument supervisor. Construction and installation of instrument and electrical equipment – switchgear and MMCI, pre-commissioning and commissioning, loop check of different types of instruments, and corrective action. DCS systems-FOXBORO, PLC, and SCADA. Maintenance during Pre-start-up activities (operational Tests) and normal operation. February 2002 – May 2002 QATAR PETROLEUM – NGL 4 PROJECT DUKHAN. Instrument supervisor Employee of SNAMPROGETTI for pre-commissioning, commissioning and start up of GTG Nuovo Pignone; MARK -V; DCS systems –HONEYWELL, TDC 3000. August 2001 – February 2002 TSKJ BONNY ISLAND (NIGERIA LTD) Instrument supervisor. Construction and installation of instrument and electrical equipment – switchgear and MMCI, pre-commissioning and commissioning, loop check of different types of instruments and correction, DCS systems.-FOXBORO. May 2000 – August 2001 ASTRA Refinery, Ploiesti, Romania Instrument dispatcher responsible for coordination of maintenance activities at the Refinery. May 1999 – May 2000 CHROME CONSORTIUM, PORT HARCOURT REFINERY, NIGERIA Instrument supervisor Directly involved in the specific works of Turn Around Maintenance and Rehabilitation Project. Performing maintenance works on instrument and control equipment, including metering devices, automatic valves, safety devices, fire detection. Detailed daily reports and analysis on the maintenance works executed, following up the observance of workplace safety regulations, working in close collaboration with other skilled personnel: mechanical, electrical and operation staff. Proposing improvement on maintenance modification, recommending materials and tools and actions required for proper execution of the instrumentation duties. April 1998 – April 1999 ASTRA Refinery, Ploiesti, Romania Instrument dispatcher responsible for coordination of maintenance activities at the Refinery. Familiar with various kind of instrumentation equipment, like: TAYLOR, FOXBORO, HARTMAN & BRAUN, CROWCRONE, MASONEILLAN, FEA, SHIMADEN, YOKOGAWA, FISHER ROSEMOUNT, etc. Also participating in different activities for the electric and electronic equipment for automation of machine tools. December 1996 – March 1998 TELFORD INTERNATIONAL ltd and ANSALDO COMPANIES UNITED ARABIC EMIRATES, MIRFA POWER AND DESLINATION PLANT Instrument supervisor Controlling the installation of the instrumentation and control equipment, and supervising the related commissioning. Working together with specialists of ANSALDO ENERGIA and HARTMAN BRAUN companies. Also collaborating in the control and start up of the analysis systems, such as: analyzers of water oxygen content, carbon monoxide and carbon dioxide analyzer, and water conductivity analyzer. 1991 - 1996 ASTRA Refinery, Ploiesti, Romania Instrument dispatcher Following up repair and maintenance work schedules associated with the instrumentation and the refinery plants, including the machine tools workshop. 1988 - 1990 BASRAH PETROCHEMICAL COMPLEX, IRAQ Instrument foreman Involved in control of the regulating loops associated with the pyrolysis plant, chlorine plant, and low and high-pressure polyethylene. Participating in the commissioning of the plants and maintenance stage. Also working in the workshop for repair of instrument electronic equipment. Liaison with American, English and Iraqi specialists of LUMMUS Company. 1987 – 1988 PETROMIDIA SA CONSTANTA, ROMANIA (Petrochemical works) Instrument foreman in pyrolysis plant Participating in pre-commissioning, commissioning and start up of the plant. ASTRA Refinery, Ploiesti, Romania Instrument repair workshop, instrument electro-mechanic Responsible for repair and maintenance of transducers and recording apparatus. Ensuring the service activities and control equipment of the following plants: CDU & VDU, gas fractionation, hydro fining of mineral oils, oils de-asphalting. Also performing repair and maintenance activities for the electric and electronic equipment for automation of machine tools. 1974 – 1986 DERO LEVER SA PLOIESTI ROMANIA (Détergent factory) Instrument electro-mechanic for instrument repair workshop. View contact information... «« previous resume next resume »» Search Results (Resumes 201 to 250 of 1094) Go to Search Parameters... Brief Description Journeyman Ironworker with exsperience in boilermaker, pipefitter work Electronics security engineer Work as apipe fitter for 6 years.my last work location was in new calidonia,austria for bieng finish contract Circa 30 years work experience (13 years Middle-East / Africa) I have extensive experience in maintenance fitting , in mining and industrial fields multi skilled engineer Mechanical techanician diploma Pipe Fabricator all duties that come with shop work. Hydro Test Pipe and Numatic Test Pipe for all and any leaks. ITI DRAUGHTSMAN MECH WITH KNOWLEDGE OF CIVIL, ARCHITECTURAL,WORKED IN BUILDINGS,ROADS ,RETAIL SECTORS WITH EXPERIENCE OF MORE THAN 9 YEARS,FLUENT IN ENGLISH.GOOD SPEED IN DRAUGHTING WORK. Security Technician A progressive individual with a record of excellence in the management of people, responsibly overseeing compliance of project specifications, and supervising completion of substantial commercial industrial construction projects. Experience welder and heavy equipment mechanic A proven Boiler Maker/ Combination Welder highly skilled in the areas of aluminum, ferrous and non-ferrous(CS, SS), exotics(Alloys), and next generation metals. Qualified under ABS, AWS, ASME, NAVSEA and Mil-Standard 248 to do all plate and pipe welding on non-nuclear systems. Objective: To find a position to utilize and challenge the skills, which I have acquired, with the opportunity for advancement. I am 56 years old married with a 32 year old step-son. Originally from California and settled here in 1984. I hold a valid La Drivers License # 006074258 and a current TWIC card. I will provide a Basic OSHA card if required for employment Service Technician/Welder RED SEAL certificate and CVIP endorsement HEAVY DUTY MECHANIC Pipe Welder I am a fully experienced plant operator of 15 years. I OPERATE 180,360 DEGREE MACHINES ALSO BULLDOZERS AND RUBBER DUCKS AND DUMPTRUCKS,I HAVE WORKED IN CONSTRUCCTION/RENTALS AND CIVIL ENGINEERING ALSO DEMOLITION THROUGHOUT THIS PERIOD.I HOLD A CURRENT CTA CARD AND PTS CARD FOR RAILWAY WORKS. I am a Heavy equipment operator /crusher mechanic/welder, I am looking for a better employment. I am qualified in operating, pipefitting, welder's helping, laboring, parts, and mechanic helping. Licensed Master Electrician, Licensed Electrical Contractor. 20 plus Industrial experience. Factory moving and inital setup experience seeking next project. Heavy Equipment Operator I have a degree in Mechanical Engineering and a Post Graduate Diploma in Business Studies. I have attainded courses in Health Safety & Environment , Sales/Princples & Strategies etc. I have also worked as a Sales Engineer and Area Sales Engineer respectively. Proficent in use of micro soft office Journeyman I & E Technician: Plant-wide installation, start-up, loop check, calibration, troubleshooting, repair, and maintenance of instrumentation and electrical systems on high pressure gas-fired boilers (produce 250lb. & 900lb. steam flow), turbo-blowers, and water-treatment facilities. I have Diploma in industrial safety ASNT LAVEL II RT UT 3. QMS ISO 9001-2000 Internal Auditor Course BY TUV India Pvt Ltd and having a nine years experince in construction civil as well as mechnical five years with thired party inspection agency 15 Years experience in Construction and Mining. Qualified Diesel Mechanic with Supervisor and Foreman skills. I am looking for a position in the crane and rigging field. i am attaching herewith my resume if suitable please contact I am a top salesman with experience in real estate, and industrial sales. I also have experience in construction as a millwright/supervisor, craft superintendent, on large projects exceeding $100 million Mechanic & Welder on construction equipment, to include repair and rebuild all parts. Detail oriented Construction Project Manager with over 10 years of experience with Federal and Private Contracts Senior Certificate I am looking for contract work or 35.00 per hour. my last job was the fabrication of a chemical mixing plant 1m in parts and labor, all my jobs I was in a leadership role Heavy Equipment Operator - I have operated Heavy Equipment since I was fourteen years of age. I also have experience in reading grades and finishing slopes. Types of equipment operated: CAT DOZERS D4H TO D11 CATSCRAPERS 621E 631E and 621F Millwright traveler, precsion, turbine, str.welder, mech, steel/iron work, machinist To obtain employment in the construction industry. I am seeking a position as an Electrical Project Manager/ Estimator Computer skills (MS office/internet), blue print reading and interpretation, excellent communication skills, well organized and willing to work overtime to meet deadlines. Qualifications National Crafts Certificate in Electrical Power Engineering and Advanced Diploma in Construction Eng. Technology I'm a metal fabricator/ Boilermaker/welder. My work consists mainly of reading and interpreting blueprints or welding process specification, operating manual semiautomatic welding equipment to fuse metal segments using processes such as MIG, TIG,MAG, ARC welding, resistance welding etc...... Instrument supervisor / technician v exp construction commissioning start up HSE I am very interested in obtaining a position with your organization. Enclosed please find my resume for your review. More than 17 years experience in welding inspection and NDT testing. Main duties is to ensure the fabrication meet the requirements of all specifications and procedures. Maintenance mechanic i am a new zealand registered electricain , my apprentiship was in substation construction and maintaince which i completed in 2006 .I currently live in london but will be moving to melbourne in the new year Respected Sir, Please accept this letter as application for a suitable post in Sales / Marketing in your esteemed organization. Experienced Rigger Field Machinist/Millwright Some offshore certificates, good knowledge of construction and offshore trades, strong worker, easy to get along with 35 YEARS ELECTRICAL ENGINEER/HV/PLC 1   2   3   4   [ 5 ]   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   Seach Parameters Change search parameters... CATEGORIES: Trades/Skilled; INDUSTRIES: Construction; Change search parameters... Keywords: (e.g. mining engineer) Find results with: ANY of the words ALL of the words WITHOUT the words Save this search parameters... Post job with this search parameters... Frequently Asked Questions What's the most effective way to perform a search? Go to Advanced Search 1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results. 2. Enter one or two of the most important keywords. Click 'Search' and look through results. 3. To search within results add more keywords. How can I find resumes that contain specific exact phrase? To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD". More Frequenly Asked Questions...
Employer's Center » Employers Home » Feedback » Help » Post Jobs » Edit/Delete Jobs » Search Resumes » Resumes By Email » My Account » Log In » Log Out
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com