Resume - i am having 13 years of experience in condition monitoring and in plant inspecti...

Misco Jobs

Resume #84479

CONTACT INFORMATION:
View contact information...

Age and Date of Birth: 34 Years, 11-12-1974

Marital Status: Married

Nationality: Indian

Academic Qualification:
Examination Passed
Month & Year of Passing
% of Marks
S.S.L.C.
April 1990
85
H.S.C.
March 1992
82.5
Diploma in Mech. Engg.
April 1995
92.3

Experience: ? Having 13 Years of Service in INSPECTION DEPARTMENT. (In Spic Ltd, Tuticorin. Tamil Nadu, INDIA.) As a DIRECT EMPLOYEE

Company profile:

SPIC (Southern Petrochemical Industries Corporation Limited) is one of the Largest Fertiliser Complex in Asia Consists Of:
Ammonia Plant (Naphtha Based)
Urea Plant
Sulphuric Acid plant
Phosphoric plant
Aluminum Fluoride Plant
Di-ammonium Phosphate Plants (Two Trains)

: ? Presently working as a Condition Monitoring Technician in QATAR GAS.Company profile:

Qatar Gas Liquefying Operating Company Limited was Established in 1984 with Three Operating Trains with a Design Capacity of 2 Million Tonnes s per Annum(mtpa) each. The Share Holders in this venture are Qatar petroleum, Exxon Mobil., Total, Mitsui and Marubeni.

Now Qatar gas is undergoing Rapid expansion with World class premiere LNG Trains (Four Trains) named QG-2(Tr-4 & Tr-5), QG-3(Tr-6) and QG-4(Tr-7)

Now Qatar gas exporting 10 Million Tonnes of Liquefied Natural gas (LNG) to customers in Japan and Spain from the existing Three Trains

After the rapid Expansion in 2010, Qatar gas will deliver 42 Million Tonnes of LNG to markets in Europe, Asia and North America.

Nature of Experience in Details:

I am having 13 years of thorough knowledge and well experience in INSPECTION DEPARTMENT in Southern Petrochemical Industries Corporation Limited (SPIC Limited) in INDIA as Direct Employee which mainly involves the following Condition Monitoring Jobs:

EXPERIENCE IN CONDITION MONITORING JOBS

? Vibration measurement and analysis – contact and non- contact method.
? SPM measurement and analysis.
? Balancing of rotating machineries.

Having Thirteen years of day to day exposures in vibration measurement, Vibration Analysis, Balancing and SPM measurement & SPM Analysis.

Vibration measurement carried out for all Rotating equipments in Displacement and velocity mode. Even Acceleration measurement (Spike Energy) also carried out for high speed machineries.

For equipments running with high vibration, vibration analysis carried out using Csi -1910 & other Portable analysers for diagnosis the cause of vibration.

Shock pulse measurement (SPM measurement) carried out for all equipments having antifriction bearings. SPM analysis also carried out.

Apart from this, shaft vibration analysis also carried out high speed turbines and compressors using Bently Nevada-3300, 3500 & 7200 series.

Balancing also carried out for decreasing the vibration level within the limit. Both shop balancing and In- situ balancing methods were followed

Special Jobs:
Hands On Experience with CSI 2120 & 2130 Machinery Health Analysers.
Working Knowledge & Experience in RBM Ware.
Working Knowledge & Experience in Bently Nevada SYSTEM – I Configuration
Computer Knowledge in MS Office Tools

BALANCING METHODS FOLLOWED:
* Three circle method
* Single Plane balancing
* Double plane balancing and vector method
Hands on Experience: (Instruments Handled)

* Very well hands on experience with the following instruments

* For Vibration Measurement:
* IRD 306 M Vibrometer. For Spike energy (acceleration) measurement
IRD-Model 910 was used.

For Vibration Analysis:

The following vibration Analysers were handled independently
* CSi-1910,2120 & 2130 Analysers.
* TK – 81 Analyser
* SHOWA Model Analyser
* VibroPort -41 (Schenck) Analyser
* DATAPAC Analyser
* IRD 880 Analyser
* IRD 890 Analyser

For Balancing:
? Sensitivity check of Dynamic Balancing Machine
? IN-SITU Balancing of Rotors.

The following instruments were operated individually for balancing of rotary machineries
* IRD 890
* VIBROPORT -41 (SCHENCK)
* DATAPAC
* Csi-2130
* B-50F model IRD Mechanalysis Balancing Machine ( for shop balancing of Rotors)

For SPM Measurement:
* SPM T2000 meter handled

* For SPM Analysis
* BAS-10 Analyser was handled independently.

FOREIGN EXPOSURES:

Worked in INDIA Rajasthan, SriRam Fertiliser and Chemicals Limited from May-2006 To June-2006. ( As Site-In Charge – Inspection)

Worked in Kuwait KNPC – Mina Abdullah Refinery from May-2008 To August -2008( As Welding supervisor)

Worked in Singapore Asian SeaLand Engineering Private Limited from June-2007 To July-2007 ( As Senior Engineer QA/QC)

R. Balasubramaniyan

Experience in other Jobs:

1. Experience in NDT FIELDS:

? Liquid Penetrant Testing
? Magnetic Particle Testing
? Ultrasonic Testing
? Radiography Testing

2. Experience in Welding Inspection:

( PIPE lines and vessels stage inspection during fabrication.
( Heat treatment of welds
( Welder's Qualification test

3. Experience in Annual Turn Around:

? Thickness measurement of pressure vessels and pipe lines.
? Hardness measurement
? Heat Exchanger leak testing
? Fabrication Inspection Jobs
? Reformer Tubes Inspection Jobs
? Pressure Vessels – Fluorescent Magnetic Particle Inspection

4. Experience in Other Jobs:

? Knowledge & Experience in Machinery Maintenance
? Cathodic Protection of underground cooling water pipe lines
? Rubber Lining Inspection
? Naptha Tank (Floating Roof) – Inspection
? Ammonia Horton Sphere Inspection
? Acid Storage Tanks Inspection
? Computer Data Entry & working Knowledge in MS Office Tools

5. Special Jobs:

? Thermography study by non-contact method using infra-red radiation technique for Horton sphere, ammonia tank., LPG Tank.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 801 to 850 of 1094)

Go to Search Parameters...

Brief Description

I have been working as a Computer Technician for the past two (2) years. I received eight (8) CXC subjects and BSc. in Electronics and Communications from the University of Technology. I also have two (2) years engineering related experience working with TCom/Huawei Technologies/CLARO.

Logistics, shipping and Offshore Assistant

Driven by innovation and integrity as a member or your technical group I will be able to provide technical drafting support using the latest version of Microstation, Intergraph, Auto Cad and other GIS, ICGS software platforms. In addition, perform non-routine and complex drafting assignments, Coordi

I have 12 years experience in the South African Police ( VIP Protection , Access Control , Cime Prevention , Investigatins ) , 3 Years experience in The Private Security Industry ( Regional Manager ) and 1 year experience in conflict zones ( Baghdad , raq as a Mentor / Advisor )

Specialized in International Human Resources, I am currently in Dubai responsible for personnel management in a multicultural environment. In France, I also actively participated in Rio Tinto Alcan to the setting up of a European HRIS.

I work offshore in the Gulf of Mexico contracted by oil and gas companies to monitor compliance and compile monthly reports. I work 12 or more hours per day 7 days a week and am used to physically challenging work.

I started my career in 1991. I am a qualified fitter & turner (trade) Currently working as a workshop foreman. Did courses in inspection (QC) and management.

I have been involved in developement and implementation of various safety programs and helping create safety cultures within organizations on and off the job. My most recent assignments have been in UAE and Mexico as a HSE Manager and I would like to continue in this role.

Experienced Automation/Process Control Engineer

Master Mariner and have experience as Senior Officer on LPG Carriers

! have 23 years in the oil and gas industry with the last 10 in the pipeline control room. Handling 10000 miles of pipeline reciepts and deliveries.

10+ Years Experience PLC Programming PC Board Testing/Repair Test Point Systems

Proficient in Microsoft Office Programs; Familiar with OSHA and NFPA federal standzards; Technical Skills; Research Skills

I am interested in employment for any position where I may acquire new skills or my current skills may be fully utilized. I have experience in Crush and Convey, Leaching, Haulage, Safety and Environmental areas. Upon my employment I will bring a safe and positive work ethic to your company.

QAQC Inspector. I have Experience on both LNG Termals and Oil Refineries

I have Masters Degree in Geology with experience in Coal Exploration.

My experience have given me a broad adaptation of works in various areas. I can and will succeed in almost every area of work as I am a practical and fast learner. I have sufficient knowledge in computer basics and literacy. I am a fast typist and can create text documents

This letter is to express my interest in applying for an oil rig job. I have an Irish national craft certificate and over 7 years experience as an electrician. Ideally I would like to gain employment within my trade as an electrician, however I am willing to start at the bottom and work my way up wi

Free! In excess of 15 years Health and Safety experience. Strong coaching. Leadership skills and experience in BBS. Experience includes large 3D programs in all types of terrain including mountains, Arctic, and cold weather conditions.

Survey Technician/Mapper/Drafter

Draughtsman - Piping / Architectural / Civil. with extensive number of years experience

Instrument Technician with Overseas Russian Experience.

Extensive working experience in Chemical Processing, Power Generation and Oil & Gas Industries. Versatile team player with an ability to incorporate new concepts and interact with all levels of professionals. Expertise in Project, Maintenance, Materials Management and ERP (SAP, MAXIMO, Primavera R3)

Over 20 years of experience in a career, dedicated to the provision of engineering services in the development of Maintenance Engineering and completing major projects. I am, most adept at successful employment in a multi-discipline environment.

Highly qualified HSE Contractor looking for overseas positions.

Environmental Consultant (Engineer/Scientist)/Geoscientist

pdms 3d cad autocad cadworx sr designer mechanical drafter field engineer walkdown

Professional Objective: To continue working as a Quality Assurance, Construction Representative, Pipeline Welding Inspector, Non Destructive Testing Inspector, Radiographic Interpreter, for a major proactive organization.

Mining & construction Equipment, Oil field production, Power generation

Journeyman Heavy Equipment Operator/Foreman 10 yrs exp.

Familiar in Auto cad (2D&3D), Microstation & Ms Office. Strong practical knowledge of Electrical. Good team player with supervisory skill

Results-driven Industrial Maintenance Planner/Scheduler offering 15+ years of extensive hands-on industrial maintenance experience, committed to efficiently manage and plan machine maintenance.

Livelink Administrator, Causeway Collboration Administrator

29 Yrs + Contracting within Materials Management & Logistics, Onshore, Offshore & Overseas currently employed upon a consultancy basis by Rolls-Royce having just completed a contract with “NSSE” where I had been their Materials Manager (see CV)

PARAMEDIC(ADVANCED LIFE SUPPORT)/FIREFIGHTER/ EMT RESCUE TECHNICIAN

Mining underground mucking hauling bolting and screening leading shotcreating and construction

I have project management experience in all phases of pump installations, well development, geothermal installs. I can run almost any type of equipment. I have worked at geothermal powerplants and mines all over the western states. I all keep my crews safe and productive. Can work well with others.

Man of many trades

i am having 13 years of experience in condition monitoring and in plant inspection includes vibration, vibration analysis, balancing, ndt, coating & corrosion and welding inspection.

I am a qualified diesel fitter with 5yrs exp and I trained with a caterpillar dealer.

Quality Control Senior Chemist

My qualification are heavy equipement technician specially on hydraulic system ,trouble shooting,repair modification and commisioning

4 years experinece in electronincs and electrical related works and in embeddeded sytems

17 years Electrical/Instrument experience including full-term 8000 hour apprenticeship with Electrical Trade Certification. Strong International background with involvement in the Power Generation, Petrochemical, Mining, Chemical Recovery and Off-shore Oil and Gas projects.

More than two years of experience in inspection works as a QA/QC Welding Inspector. Extensive experience gained in major onshore/offshore oil and gas construction projects, covering all methods of structural and piping fabrication, erection and inspection (Modules, CPP Decks/Topsides, Jacket & LQ).

All activities relating to Electrical Construction projects such as installation & commissioning of Electrical equipments namely generator, Transformer, HT. LT panel, Laying of power, Lighting cables & Lighting Fitting

Would like to personally discuss my qualifications and personal resume in greater detail and look forward to scheduling a personal interview with you in the near future. I have my T.W.I.C. Industrial safety Training. 24 hour Hazwoper/Forklift Certification. Confined Space Training;

I am a Civil Engineering Graduate from NED University, Karachi, Pakistan and hold a Master's degree in Environmental Engineering from USA. I have extensive professional consulting experience spanning over 10 years of EHS management and controls, involving Due Diligence reviews and audits, Environme

I have 5 years as a Cad Designer using Inventor 3D and AutoCAD

Planning/Schedule Engineer,Maximo IMplementor,

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 [ 17 ] 18 19 20 21 22

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out