Resume - I am a Graduate in Mechanical Engineering with four years experinece in the fie...

Misco Jobs

Resume #85096

CONTACT INFORMATION:
View contact information...

Career Objective:
To secure a challenging assignment that offers responsibility and growth, to play a prominent and imperative role in the development of the organization.

Academic and Technical Qualification
Bachelor Degree (B. Tech.) in Mechanical Engineering from University of Calicut.

General responsibilities
* Audit the Work of all subcontractors and departments at stipulated intervals.
* Leading the inspection and execution of work in Mechanical, Welding, with team of QA/QC technical assistants following an approved Inspection and Test Plan.
* Interpreting RT films, preparing report and specifying repair procedures.
* Preparation of radiography shooting technique meeting customer requirements and getting it approved.
* Performing activities like Welder's Qualification Tests, Destructive testing, NDE etc.
* Ensure all the instruments are calibrated and re-calibrate before the due date.
* Lay down guidelines and solutions for day to day production related problems.
* Conduct management review meetings to inform the management about the quality of work and resources required.
* Coordinate inspection activities at Subcontractor's premises with inspectors / Third Party agencies.
* Conduct and Participate in Internal Quality Audits as per ISO requirements.
* Monitor the closure of all Non-conformance reports (NCR'S) to ensure the compliance with Preventive action proposed.
* Conduct feasibility study for new enquiries and define technical specifications of equipments required, WPS and describe the scope of work.
* Monitor heat treatment activities and decide the most suitable heat treatment procedure to meet customer specification.
* Conduct audit at the vendors and Subcontractor sites on random basis.
* Make sure that the latest revision of drawings and Specifications are used.
* Prepare documents to streamline the quality management system and check the compliance of activities as per ISO: 9001.
* Conduct and coordinate regular trainings to keep the workforce aware about the customer requirements.

2006-2007
Worked as QA/QC engineer in Reliance Refinery Expansion Project (JERP) employed by L&T ECC Division in which Bechtel is the EPC management contractor. In total, the project cost around $5.7 billion employing more than 90,000 people during construction, fabrication and installation of 109,170 metric tons of steel, about five million meters of varied size pipe, more than 4000 pieces of major equipment, and more than 110,000 isometrics
* Implicated in Coker Unit for the inspection of quality spearheading the team for swift completion of the project by May 2008. It involved AG, UG, Structural Tanks, Refractory and Exchangers Inspection for Quality as per Inspection and Test plan (ITP) and Bechtel France Specification

General responsibilities
* Monitor the 'Quality of Work' of all subcontractors.
* Supervising the execution of work in Mechanical, Welding (Piping & Storage Tanks), Painting, with a dedicated team of QA/QC technical assistants with Project Quality Plan.
* Verification of Tie-in / Hot Tap Tie-in works
* Verification of Hydro test packages / Mechanical completion Package / Inspection Record Books
* Conducting the activities like Welder's Qualification Tests, hydro testing, pneumatic testing etc.
* Monitor the Inspection and Test Status of construction activities of all Disciplines.
* Prepare Quality plan, Inspection Test Plan, WPS, PQR and WPQR as per client requirements.
* Monitor the Calibration of Inspection and Measuring Equipments.
* Guiding and trouble shooting day to day construction problems.
* Appraise the Client about the Quality of work with statistics.
* Monitor the inspection activities at vendor's premises with inspectors / Third Party agencies.
* Inspections of piping material identification as per Isometric drawings/ Material take off, before fabrication and co-coordinating with PMI Crew members.
* Follow up of all Non-conformance reports (NCR'S) to ensure closure.
* Resolving technical Queries with project management team (PMT) on daily basis.
* Coordinate with client's project inspection unit for necessary project inspection for witnessing/ hold points.

As a QA/QC Welding Inspector/Engineer
* Checking that the welding procedure to be used are approved and duly qualified as required.
* Verifying that the welders are qualified to the approved project WPS. Checking that only approved electrodes, filler wire, flux and gas are used.
* Supervision of the welding activities, checking in particular the adequacy of joints preparation, protection and provision in case of rain, wind, low temperature, etc.
* Inspection of welds, visual examination and test are carried out and documentation in accordance with "ITP" for site activities, verifying the inspection record and validating the relevant result.
* All the NDT offerings with respect to the material wise and Tie-in requirements and its interpretation of test results
* Checking the adequacy of equipment for pre-heating, welding, heat treatments and weld examination.
* Monitoring the performance and capability of each welder on the basis of radiograph inspection/test. Review of all procedure & other doc related in mechanical Welding/NDE aspect.
* Checking heat treatments for PWHT diagrams. Checking the correct measurements of hardness, when required, and the acceptability of the result.
* Filling/documentation and retaining of all NDT reports, heat treatments report and inspection reports. Informing QC Manager regarding the problems which require their decision. Checking welding parameters as per WPS required.
* Verifying the adequacy of the Quality Control Procedure. Checking that inspections and test are carried out and documented in accordance with the approved procedure and quality plans. Documentation/filling of all piping inspections records.
* Review of test packages clearance/ punch listing as per project specification as per system before hydrostatic testing prior to pre-commissioning. Assisting of commissioning works as per plant activities. I am trained by the Company for Minimizing the repair percentage and Rework.
* Inspection of piping pre-fabrication/erection as per ITP. Dimensional checking of piping as per approved isometric drawings. Line checking of piping, review of test packages, punch list carried out conforming to ISO, P&ID and project specification prior to test.
* Checking heat number on required piping traceability. Checking of pipe support pre-fabrication as per approved construction detail drawings. Checking of piping materials as per piping materials specification (PMS).
* Prepare punch list records to monitor the progress of works inclusive of balance of joints for testing. Prepare non-conformance reports for discrepancies encountered during inspection and as per project specifications. Updating QC documentation reports for filling. Reporting to QC Manager to discuss problems during inspection/surveillance.
* Responsible to review plan drawings to P&I Diagrams to prepare isometric drawing, material take-off, check material to be used as per specification and engineering standards. Supervise sub-contractor in fabrication and installation of pipe spools and pipe supports to assure quality.

2000 to 2001
Worked as a welding supervisor for S.K.S Engineering India Ltd which is into the production of engineering products catering to the needs of a wide range of industries.
* Planning and Scheduling.
* Maintains quality control procedure for the fabricated items
* Implementation of safety standards and maintain safety of the work force.
* Assign manpower for the installation work.
* Preparation of production reports
* Ensure materials as per drawings &specifications.
* Materials take off and listing.
* Check if the latest construction drawing are used
* Consult engineering problem with engineer
* Check and consult product delivery at site
* Check with work front and coordinate with other discipline
* Prepare daily and weekly report
* Perform official line check
* Perform back check of punch work
* Check and ensure piping test pack preparation is properly made
* Check and review of test pack prepared by subcontractor
* Coordinate and consult with subcontractor and other discipline concerning Testing
* Witness of piping pressure testing
* Check and ensure piping flushing and blowing preparation is properly made
* Perform piping reinstatement check

Professional Certifications
CWI from AWS; Certificate No: 09013821

LEVEL II CERTIFICATE - AMERICAN SOCIETY OF NON DESTRUCTIVE TESTING (ASNT)
In accordance with SNT – TC – 1A in
* Radiography testing.
* Ultrasonic testing.
* Magnetic Particle testing.
* Liquid Penetrant testing.

Functional Strengths
* Knowledge of codes like API 1104, ASME SEC V, ASME SEC IX, ASME SEC VIII, ASME B 31.3, AWS D 1.1, ASME B16.34, EN, DIN and ASTM Standards.
* Manage various key operations during glorious service in S.K.S, L&T& PEEKAY gaining insightful exposure of overall N.D.T, Welding Inspection, QA/QC procedures and its preparation, Destructive testing and various quality management functions.
* Drawn up detailed inspection plan for cost-benefit analysis to ascertain technical and commercial viability with accountability of getting the work executed as per the specifications.
* Contributed engineering inputs to define technical specifications of equipment required and describe the scope of work.
* Anchored shop floor activities and provided reinforcements wherever needed to ensure smooth work progress.
* Enacted realignments in strategies and contributed motivational strengths to ensure completion within defined time & quality parameters.
* Conceptualized and implemented cost reduction measures to control expenditure within budgetary provisions.
* Motivate & Train subordinates to generate performance levels of demand.

Personal Information:
Date of Birth: 18-MAY-1983.
Martial Status: Single
Languages Known: English, Hindi, Malayalam and Tamil

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 701 to 750 of 1096)

Go to Search Parameters...

Brief Description

Operations Manager for Geological firm in drilling department. Organize jobs,order supplies,all banking,screening personale,training locals,public relaitons,senior diamond driller.

Unlicensed Engineer, Diesel Mechanic

Apprenticeship exemption granted for the technical in-class component Levels 1, 2, 3

Maintenance, HVAC, MAnagement and Supervision, Safety

Having total experience of 14years 11months in Offshore, Onshore, Chemical and Refinery fields with strong PDMS Piping Designing, Draft, Isodraft and PDMS Administration background looking for an opening of PDMS Piping Designer

I have been working as a Marine Piping Designer for 8 consecutive years.I can make good detail piping arrangement drawing of any system using AutoCAD.My experience includes piping arrangement of various system in the Engine Room and Hull Part .I am familiar with class rule and Int'l. standards.

Over 20 years management, construction, production and sales experience dedicated to achieving profitability and delivering outstanding customer service. Energetic professional with exceptional analytical, organizational and people skills. Strong personal ethics and integrity. Treat each customer as

30 years in the repair and maintenance of heavy equipment in both shop and field setting.. Supervision experience !

Fitter Including Machining and Diesel Fitting

Offering over 10 years of full and comprehensive experience in instrumentation works that includes Installation,Calibration,Loop Checking and Functional Checking, Pre-Commissioning, Commissioning Activities, Trouble Shooting and Repair. Maintenance works in

Operating front-end loaders & dozers in the waste industry

Offshore Advanced Rigger,experianced,heavy lift,200t capt,AB seaman

Construction manager, laborer, Class A CDL Drivers license, mechanic

Maufacturing Automation

Mechanical, electrical, structural maintenance & repair, estimating, project supervision.

Operations Manager,Plant Manager,Equipment Manager, Maintenance Manager

My capabilities have been achieved through many experiences which include training and support of in-house staff in multiple locations, while working on concurrent projects as a Sr Designer/Project Engineer.

NACE Level II Certified Coating Inspector, Certified Welding inspector

Free! Industrial construction electrician with two years maintenance in open pit mine

I graduated from Associated Training services for Heavy Equipment Operator .N.C.C.E.R Certification on a variety of excavating equipment .I have a Class A CDL with Tanker Endorsement.I am a hard dedicated worker and a fast learner..

Remote Paramedic, Firefighter, Paramedic

nvq level 3 in electrical installations, 17 th edition wiring regs, hv terminationsand splicing, supervisor experience

D.A.E. (Mechanical) 1970/3300 Second 1989

I am a Structure / Civil Engineer with 12 years expertise in Structure and infrasturctures for Petrochemical, Oil & Gas, CPO (Crude Palm Oil), Mining, Geothermal Power and Cement Projects

Dynamic professional with solid 22 years of experience in the shipping business and 4 years of experience in the document management engineering field, aims to respond to new challenges and contribute effective in the shipping and engineering field.

I am a Graduate in Mechanical Engineering with four years experinece in the field of Oil and Gas. Iam also a certified CWI by AWS and also got certification as Level-II in RT,UT,PT,MT.

Experienced Heavy Equipment Operator/Open Pit Miner/Willing to relocate

I am an experienced HSE Professional knowledgeable with program-procedure development and implementation, accident-incident prevention and investigation, root cause analysis, supervision, contractor compliance, security programs, medical programs, health and food programs, environmental programs

Experienced Mechanical engineer as Tunneling specialist in operation,maintenance,construction tunnels and executing projects.

MINING/TUNNELING/MECHANIC

I would like to bring to your kind notice that I have got Ph.D in Hydrogeology, post M.Sc. (Tech.) in Hydrogeology, M.Sc Geology from prestigious Andhra University. I am having 15 research publications in National and International reputed Journals. I have Completed 2 major Research Projects

Manager, Team leader, Computerized production management, International import-export, letters of credit, banking, assistant

To obtain a suitable position in pursuance of promising career where I can make use of skills and experience for the growth of the organization, in conjunction with recognition and encouragement for hard work and sincerity.

Engineer / EMS / SCADA / Electrical / Telecom / Power Sector

Admisnistrador de sistemas, Systems Administrator, Ingeniero de Sistemas, Systems Engineer, Ingeniero de Software, Software Engineer, Ingeniero Telecomunicaciones, Telecommunications Engineer, Project Manager

My skills are in construction, fabrication, maintanence and electrical HV fitting. I have CN, LF and WP tickets. First aid cert.

HR driver licence [Austr], Austr QF cert 3, Austr ESI cert 3, International switching Authorisation up to 88kv, Victorian line worker registration, WA licence for High Risk work, First Aid, Oh service testing [Metrel, NST], Safety blue card, EWP card, Internat Maint Electrician 4yr appy + 8yr exp

A skilled and dedicated Administrative Assistant with more than 15 years’ experience in the oil & gas industry; coordinating, planning and supporting daily operational and administrative function. Able to provide comprehensive support for senior and middle management.

Geospatial Analyst with over 10 years in GIS, 4 years in remote sensing, 8 years in autocad, 4 years offshore drilling, and a Geology degree.

Areas of expertise include Civil/ Mining Management, Construction Supervision, Project Management and Procurement.

Environmental project scientist with project management experience in the areas of oil and gas and dry cleaners. I have extensive Phase I and Phase II experience. I have a proven track record of being on time and within budget while working on multiple projects.

Crane/Rigging Trainer, Crane/ Lifting Equipment Inspector, Safety Advisor, Crane/ Maintenance Engineer, Rigging Supervisor, Terminal Supervisor

Instrument and Electrical Technician/System Integrator with over 10 years of experience in Control Systems, MS SQL and Microsoft Office. Proficient in troubleshooting VFD’s, Process Control, HMI design, construction and troubleshooting of industrial servers and workstations/communications.

Dual Post Graduate Mechanical Engineer with 10 years of experience

Experienced Offshore Plater - Coded Welder. Norwegian Survival Certificate, European Survival Certificate, Mexican Work Visa

In May 2009 I will graduate from Texas Tech University with a Masters Degree in Transportation Engineering, with 3.66 GPA. With over 1 year of experience in Commercial Project, I have developed a strong background in Planning and designing.

Mechanical Engineer with 4+ years of experince in construction of power and oil & gas sector

Perform other work as required. Excellent team worker, function well under pressure, highly motivated toward goal achievement, self motivated, eager to learn, honest and hardworking.

If you read my work history you will see a great amount of experience in very relative systems to the position I am applying for. I can't say I know it all, but I have been exposed to most of it. As Manager or Superintendent, I have administered and negotiated labor, materials and services.

Diesel Fitter (Heavy Earthmoving), Maintenance Planner (Mobile), Project Manager (MARC), Maintenance Supervisor, Workplace Trainer and Assessor

1 2 3 4 5 6 7 8 9 10 11 12 13 14 [ 15 ] 16 17 18 19 20 21 22

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out