Resume - Welding, fitter, sheet metal fab. and steel worker.

Misco Jobs

Resume #85237

CONTACT INFORMATION:
View contact information...

I am looking for a position which carries high impact as well as new challenges.

PROFESSIONAL EXPERIENCE
Present
Construction Labor Contractors
Knoxville, TN. (Supervisor) Tom Tilley 865-293-8037
JOURNEYMEN SHEET METAL MECHANIC:
Installing sheet metal duck work at Wellmont Hospital Kingsport TN.

NASA Jet Propulsion Laboratory
Pasadena CA.
07-01-08 10-01-08
ENGINEERING TECHNICIAN II:
Duties included supporting the Mars Science Laboratory (MSL). Assignments included assembly and disassembly of mock-ups, prototype and flight spacecraft. I conducted tests on electromechanical and prototype electromechanical devices and assemblies. Performed and installed assemblies in clean room environments. Qualified flight technician specialist working in high bays and 10,000 class clean rooms and in this capacity supported most of the laboratories at JPL.

JBM Incorporated
Knoxville, TN. (Supervisor) Steve Stiles 865-573-9800
06-01-06 – 04-01-08
SHEET METAL MECHANIC:
I designed, lay out and fabricate equipment and machinery for power plants, paper mills, cement plants and aluminum foundries across the United States. Coordinated teams in the field for installation of equipment that I fabricated in Knoxville, Tennessee.

Bennett Construction
Home Remodeling (owner) 423-257-2057
Santa Ynez, CA.
07-01-03 - 05-01-06
ARCHITECTURAL DESIGNER AND BUILDER:
Construction and budget input early into the process allowing the design to develop in alignment with the client's goals. Worked in areas from new construction to remodeling kitchens, bathrooms, removing walls, reworking electrical wiring, adding and changing the existing lights, new stucco, new texturing walls, painting, stone work, manufacturing granite counter tops, tile, domes and barreled ceilings and architectural columns.

Space Systems Loral
Palo Alto, CA. (Supervisor) Randy Simons 650-852-4000
07-01-00 – 07-01-03
SENIOR LEAD, LAB TECHNICIAN:
My duties surrounded the Assembly, Integration and Test on communication satellites. I installed flight hardware per payload requirements to the complete spacecraft for final flight. Integration of the communication panels onto the Bus Module, integration of tower assemblies, antennas and reflectors delivering a final assembled spacecraft to the launch base. Programs supported to the following spacecraft: Optus C1, DirecTV-5, DirecTV flights 5/7, Echo Star flights 8/9, Sirius CDRadio flights 2/3/4, Wild Blue, IPStar, MBsat, MTSat-1R, Satmex and Intelsat 9 flights 5/6/7.
Other assigned tasks included the training of technicians, coordinating teams at performing and completing the assigned tasks that had priority. NASA certified in flight harness, installed main cable harness and mate/demate of connecters and torque certifications. Flight bonding of structure, thermal compound adhesives. RF waveguides, switches, loads and TWTA's. Assigned a stamp for witnessing as a quality delegate, equal to QC quality control.
My main duties and assigned tasks were to perform the completion of Optus C1. I worked on Optus C1 for a little over two years before going to launch base down in French Guiana, South America. The program was handed to us by Japan who had started the build but soon found themselves in over their heads. There were numerous amounts of rework involving the troubleshooting of Radiated Emissions and Radiated Susceptibility (RERS). I supported the Acoustics and Thermal Chamber as well as the Compact Antenna Range. I helped design and install various types of off loading fixtures creating zero gees for antennas and reflectors. I worked with Thermal Engineers on installing new company designed passive intermodulation (PIM) blankets for preparing for the Optus C1 PIM test at David Florida Laboratory (DFL) Ottawa, Canada.

JBM Incorporated
Knoxville, TN. (Supervisor) Steve Stiles 865-573-9800
01-01-97 – 06-01-00
SHEET METAL MECHANIC:
I designed, lay out and fabricate equipment and machinery for power plants, paper mills, cement plants and aluminum foundries across the country. Coordinated teams in the field for installing the equipment fabricated in Knoxville, Tennessee

United Technologies Chemical Systems
San Jose, CA. (Supervisor) Cliff Williams 408-776-5315
1987-1994
MISSAL SHEET METAL MECHANIC:
Lay out and fabricated all flight hardware working with a team of engineers for the new upgrades to increase payloads on the Titan IV Launch Vehicle. Assembly and hydrostatic testing of flight hardware for the following programs: Space Shuttle 'Booster Separator Motors', Tomahawk Cruise Missile 'MK 111 and MK 106 Motors', and Trident-D5 ICBM. Assembly and helium leak testing for the Tomahawk Cruise Missile 'Titanium Warhead'. Heat-treated flight components for Titan IV and Tomahawk programs.
Worked with design, manufacturing and quality engineering teams to implement new programs. Fabricated all the flight hardware totaling forty flights and eighty boosters of the Titan IV Launch Vehicles.

Lockheed Missile and Space Company
Sunnyvale, CA.
1984 - 1985
VEHICLE TECHNICIAN AND SHEET METAL MECHANIC:
Developed shop aids and tooling for a wide variety of spacecraft projects.
Fabricated and installed components on spacecraft systems.
Planned necessary operations and their sequences.
Layout and selection of materials and parts per drawings.
Recommended solutions for engineers from both verbal and written instructions.

Lockheed Missile and Space Company
Austin, TX.
1981-1984
SHEET METAL MECHANIC:
Worked within several test teams to prove launch capability of unmanned remote vehicles.
Assisted R&D teams with UAV's onsite, at launch, retrieval and at wind tunnel facilities.
Evaluated data and provided design recommendations to systems engineering.
Fabricated ground support and flight hardware for special programs.
Worked with engineers to modify designs for more efficient shop fabrication.

1977-1980
Worked right out of welding school starting1977. I worked at four different companies, mainly with defense sub-contractors. Duties included completed layout, welding and custom fabrication with metals up to ten inches thick, rolling or forming with 800 ton press breaks on items like: nose cones, rounds, wing struts for F-16's, storage silos for MX missiles and forming mandrels for nose cones that went on the boosters for the Space Shuttle.

EQUIPMENT USED 28 YEARS:
Bench type and stand-alone type drill presses capable of drilling with bits up to three inches in diameter. Bridge Port mills, lathes of 24" diameter. Press brakes, from hand operated to those with the capability of bending up to sixteen foot long flanges. Familiar with all type of hand tools: dial and test indicators, micrometers, dial caliper, Height Masters, Height Gauges, Bore gages, thread, cylindrical, mass, torque, pressure, vacuum, force, and flow gages. and most all electric and pneumatic hand tools.

EDUCATION
Welding School certified structural steel and pipe 1978.
Attending online courses of the University of Phoenix 2001.
Attended ETSU (East Tennessee State University), working on my Engineering
Degree from 1995-1997.
Attended UT (University of Tennessee), worked toward my degree in General Engineering during 1997.

SECURITY CLEARANCE:
Top Secret issued in 1981 by Lockheed

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1 to 50 of 1092)

Go to Search Parameters...

Brief Description

Free! Twenty two years of mining and construction experience in both surface and underground. Mine Foreman and Blaster Gassy mines. Surface and underground blaster experience. Coal and Hardrock experience.

Free! Electrical Supervisor/Technician. Construction and Commissioning, Explosion Protection Certification

I am a very independent thinker. I enjoy challenges, actually, I thrive on them. I consider myself a very 'hands on' type of problem solver. Thinking 'Outside the Box' has always been my approach to difficult problems.

Master Plumber/ Master Pipe Fitter & Gas Fitter, Cert. 6G Welder

Responsible for maintaining mining equipment and responsible for performing safety Plant Operations, repairs and preventive maintenance and follow the procedures carefully reports to the supervisor any problem or trouble on his area of responsibility.

40 Years experience as a welder, 15 Years Sub-arc

Knowledge in repair, rewinding, servicing and maintenance of electrical equipment such as AC/DC motor and generator ranging from fractional horsepower up to 8000 HP low and high voltage, wet and dry type transformer, coils and etc.

Free! Welder

Ase Master Mechanic 22 years

Licensed Journeyman Electrician, thirty four years experence, Industrial, commercial, residential, and oil field

electrical contractor for 25 years and have a ton of experience in the electrical field.

Pressure Welder, Pipe Welder with 20+ yrs experience, Hard working

heavy equipment operator sewer and water forman

hi looking for job

Electrician

I am a traveling supt. looking for someone to utilize my skills. I am an excellent problem solver and work well under pressure.

FIMILIAR WITH ALL TYPE OF SURVEY EQUIPMENT

Welding, fitter, sheet metal fab. and steel worker.

Journeyman/Red Seal B Pressure Welder

Field Operations Manager with 20 years experience in the civil and concrete foundation business. Strong technical and hands-on expertise in various different forming systems which include plywood, aluminum, steel and tunnel. Detailed knowledge of site work and concrete placement.

Equipment operations

Maintenance Welder/Fitter with strong background in Plant Maintenance

electrical /instrument superintendent

Climb and rescue certified Class II OSHA 30 hour construction C-Stop 10hr BOP-ARSC-OSHA-10hr. first aid certified CPR/AED adult certified Safety Inspections Quality Control NCCCO certification number: 070431577 Mobile Crane Operator Proficient on a computer (MS Word, Excel power point)

Electrical Superintendent

Primavera Scheduler P3 to P6 and certified in P6

To obtain a full or part time position as an Estimator with a growing company where my years of experience and professional skills will be utilized

TURRET PRESS AMADA EXPERT,ARIES,COMA,VELLA,PEGA,VIPROS,2510

skilled tradesman. Mobile/Tower crane operator, Heavy duty equipment mechanic, Rigger, Inspector, Apprentice Millwright

30 plus years experience with heavy equipment both as an operator and supervisor.

20 years signalling experience with IRSE licenses and Signal Maintainer certificate. SPONSORSHIP PREFERED.

My education qualifications, career training, knowledge and acquired skills would be suited to position in your company (Former Soviet Union: Kazakhstan, Russia).

I have been in the excavation industry for over 30 years having owned my own Excavation company for 16 of those years. I can operate a variety of equipment as seen on my resume

scaffolding supervisor / co-ordinator /instructor

Over 25 years experience in automotive, heavy equipment, and tractor / trailer repair, maintenance, and rebuilds. Repair, maintenance, and diagnostics on all types of heavy equipment / tractor trailer in shop and field service. Rebuild on all types of engines to include Caterpillar, Cummins / Detro

Professional Surveyor & Mapper, Thirty years experience. Construction Layout, Quanity Surveys, As-built Surveys.

Over 20 years as an industrial electrician

Experienced in deep excavations for 20 years, specializing in sewer and water and installation of large diameter pipe, as well as Mass excavation and Heavy Highway work.

I am presently working VOLTAGE ENGINEERS LTD AT DOHA QATAR) as plant engineers / Automobiles maintenance engineers .managing a of workshop Transports in charge ( Company- Oil , Gas / power, infrastructure/ Energy/ Constriction. automobiles )

Heavy equipment operator

Heavy equipment - mining

Over 20 years operating track hoes, dozers, loaders, rock trucks, etc., in construction of water treatment, sewer plants, and road construction.

heavy equipment operator for over 25 years. Have many skills in heavy highway construction, mining of gravel pits, haul trucks, bull dozers, blades,trackhoes, etc.

30 years expierience in concrete, commercial, residential.

Over 20 years of experience in diesel engines ,marine propulsion system and generator set working in the middle east and gulf region for more than 15 years U.A.E and Saudi driving license a valid resident in U.A.E read ,write ,speak English , Arabic ,German

Estimating project managing scheduling coordination with general owner to make sure schedule can be met purchasing preparing submittals laying out preparing ASI's RFI's RFP's completing project from start to punch list.

run different types of cranes. friction, tower, experience in pile driveing. 30 yrs.e xperience

I can run just about any kind of equitment you have To do a job in construction, I ran a crew of 20 men for 6 year's and built forms, poured concrete,built house's and metal buildings I can read blue print's I do have about 2 year's of oil field exp. Motorman and Floorhand, Some Driller asst. exp.

I am a Heavy Equipment Operator, I have been in the Land Development Industry for over15 years, I have operated scrapers (657, 651) I have operated rollers, water wagon, rock truck ( material haulers) on Landfill, Subdivisions, Highways, Dams, and Golf Courses.

Hands-on and Classroom training in Welding,Blueprint Reading,Pipefitting,Machineshop, and Residential Wiring

[ 1 ] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out