Resume - 4 years experinece in electronincs and electrical related works and in embedded...

Misco Jobs

Resume #85473

CONTACT INFORMATION:
View contact information...

OBJECTIVE:
To attain a responsible and a challenging position where I can exploit my knowledge and technical skills, that encourage continuous learning and creativity, providing exposure to new ideas, which stimulates professional and personal growth.

EXPERIENCE DETAILS:

ƒå Professional experience of 4 years in Embedded Systems Design & Development and Testing.
* 2 years of Experience in Embedded System design and Development.
* One year Experience in Verification and Validation in the Medical Devices.
* One plus years of Experience in Software testing in avionics domain.

AREAS OF EXPERTISE:

* Design and development of Embedded Systems.
* Good experience in Firmware Development.
* Good Working experience in 8-bit and 16-bit microcontroller architecture.
* Good working knowledge in serial communication protocols like I2C, SPI, UART, RS232, and RS485.
* Good Experience in C / Assembly Language programming.
* Very good knowledge in the analytical of Electrical Hardware Circuit.
* Electrical DFMEA (Design Failure Mode Effective Analysis).
* Experience Verification and Validation of the Medical devices.
* Good knowledge in writing test strategy and developing protocol.
* Well understanding of the medical standards like ISO: 13485 and FDA guidelines.
* Good knowledge of the Compliance Testing.
* Working experience in EMC/EMI.
* Development of test cases Using RTRT for avionics software.
* Good knowledge in the DO-178B
* Development of Low Level Requirement.
* Experience in the DOORS, Dimensions and PVCS.

DOMAIN EXPERIENCE:

ƒå Medical Devices.
ƒå Aviation.
ƒå Industrial Automation.

WORKING EXPERIENCE:

Organization Designation Duration
HCL Technologies Chennai Project Engineer 23 Apr 2007 -till date
Integrated Process Automation (IPA) Pvt. Ltd. Bangalore. R&D Engineer July 2006 ¡V March2007
Adpro Automation Pvt. Ltd. Bangalore. R&D Engineer Aug 2005- June 2006

EDUCATIONAL QUALIFICATION:

M. Sc. Applied Electronics (Bharathiar University).
B Sc. Electronics (Calicut University).

PERSONAL DETAILS:

NAME: SAJITH B
DOB: 27-April-1977
Contact Details.: psajithb27@gmail.com,
Mobile: +91-9884446398.

PROJECTS:

Medical Projects:

Description of the Project1: [Cryo Balloon Ablation System]. The CBAS-console consists of five major sections Industrial PC, RTSE circuit, Pre-Cool circuit, Vacuum Pump section, Power Distribution section. The Industrial PC provides the GUI during the console operation. The RTSE circuit receives the command from industrial PC and performs controlling and sequencing of all actions that are involved in controlling the flow of N2O to the balloon catheter. The pressure and temperature signals from various points of the N2O flow path are received and processed by the RTSE circuit.
The Pre-cool circuit is used to maintain the cryogenic temperature (-30 deg C) before entering in to the catheter. The vacuum pump is used to maintain a predefined value of vacuum during various states of the Console operation. The console receives the inner/outer balloon pressure and inner balloon temperature through the catheter board electronics. The communication between Console and the catheter board electronics happens through serial interface. The console is powered with universal AC input and all the electronics in the console is powered by medical grade power supply.

Description of the Project2: [Selective Neural Stimulation]. The SNS technology is a neuro-stimulation battery operated device, which transmits a controlled waveform designed to stimulate specific nerves. This SNS waveform is composed of a carrier signal and a pulse envelope. The carrier waveform is designed to be of sufficient frequency to overcome tissue impedances. The pulse envelope contains specific pulse width, amplitude and shape information designed to stimulate specific nerves. SNS can be used to treat a medical disease condition called overactive bladder.
The stimulation device in its final patch form is placed on the skin for a period of up to seven days. The user can adjust the patch waveform parameters through an optical link via a handheld controller. In addition, the controller can be connected to a PC via a hard wired serial link. The hard wired serial link can be used to upload data stored on the controller and allows a wider range of parameter adjustment for patch unit.

Responsibilities:
1. Requirements Study and analysis
2. Verification Plan development
3. Development Test Strategy and Protocols
4. Dry Run execution.
5. Testing.
6. Development Board Test protocol Project2 (SNS)..
7. Development of DFMEA for Project2 (SNS).

Aviation Projects:

Description of the Project 1: It is a requirement based testing. SCOE (Software Common Operating Environment) is an ARINC-653 compliant system to manage all the operations in airborne equipments. SCOE Software is a Level A software that needs to adhere to all the stringent objectives defined in DO178B standards. As per DO-178B Structural coverage is mandatory for Level A software. The objective of this analysis is to show 100% coverage in terms of statement coverage, decision coverage and MCDC. If there is any lack of coverage then justification is provided. In addition to that unit testing is also done. Structural coverage is performed to ensure that there are no dead code and unreachable code. Unit testing is performed to ensure that the written software adheres to the low level requirement.

Responsibilities:

1. Requirement Study and analysis
2. Test case development as per DO-178B
3. Automation of test cases
4. Run the test cases by using RTRT Tool, Simics simulator and On Target

Description of the Project2: Smiths_Scoe-LLR_Gen project for development of Low Level Requirements for the features File System, AFDX and HMEvent Interface modules in the SCOE (Software Common Operating System Environment).

Responsibilities:

1. Requirement Study and analysis.
2. Generation of low level requirements for SCOE.

Industrial Automation Projects:

Description of the Project 1 (Belt scale): Belt conveyors are accepted means of moving bulk materials in mining and process industries. With the advent of this fast mode of transportation, accounting the quantity of material transferred assumes great importance. Belt scales are the most reliable index of material accounting and can be measured directly and precisely, which offer accurate weighing systems to maintain higher accuracy and better accountability in the process. the systems employs a weighing frame with two or four load cells to sense the material load on the belt, a tacho generator to measure the belt speed.

Description of the Project 2 (Ethylene Oxide & Carbon dioxide filling Machine): This project is developed for Pest Control (India) Pvt Ltd, Mumbai, for filling liquefied EO & CO2 in different size of cylinders. It consists of one platform mounted over load cells controlled and monitored by the processor and display unit. Operator can enter the set value and other accuracy limiting parameters through keyboard. Once the operation started the set quantities of EO & CO2 will be filled in the cylinder. System is interfaced with a printer which is placed in a remote location through RS485, so that after each operation, required parameters will be printed out automatically along with current time and date.

Description of the Project 3 (Hopper Weighing System): Description of the Project: The hopper weighing system developed with four set points. The system would always monitor the weight on the hopper, if each set point is achieved corresponding output is activated there by the material flow was controlled The system was designed to be used ADC 7730 which is SPI compatible. The system includes max7219 display driver IC, additional memory, D/A Converter AD420 and the system has an expansion

Platform Used 8051 family IC's
Language Used C (Keil Cross compiler)

Responsibilities:
1. Requirement Study and analysis
2. Designing and Development Hardware section.
3. Software development for the Firmware and Display.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 801 to 850 of 1096)

Go to Search Parameters...

Brief Description

HVAC, Maintance

I have been working as a Computer Technician for the past two (2) years. I received eight (8) CXC subjects and BSc. in Electronics and Communications from the University of Technology. I also have two (2) years engineering related experience working with TCom/Huawei Technologies/CLARO.

Logistics, shipping and Offshore Assistant

Driven by innovation and integrity as a member or your technical group I will be able to provide technical drafting support using the latest version of Microstation, Intergraph, Auto Cad and other GIS, ICGS software platforms. In addition, perform non-routine and complex drafting assignments, Coordi

I have 12 years experience in the South African Police ( VIP Protection , Access Control , Cime Prevention , Investigatins ) , 3 Years experience in The Private Security Industry ( Regional Manager ) and 1 year experience in conflict zones ( Baghdad , raq as a Mentor / Advisor )

Specialized in International Human Resources, I am currently in Dubai responsible for personnel management in a multicultural environment. In France, I also actively participated in Rio Tinto Alcan to the setting up of a European HRIS.

I work offshore in the Gulf of Mexico contracted by oil and gas companies to monitor compliance and compile monthly reports. I work 12 or more hours per day 7 days a week and am used to physically challenging work.

I started my career in 1991. I am a qualified fitter & turner (trade) Currently working as a workshop foreman. Did courses in inspection (QC) and management.

I have been involved in developement and implementation of various safety programs and helping create safety cultures within organizations on and off the job. My most recent assignments have been in UAE and Mexico as a HSE Manager and I would like to continue in this role.

Experienced Automation/Process Control Engineer

Master Mariner and have experience as Senior Officer on LPG Carriers

! have 23 years in the oil and gas industry with the last 10 in the pipeline control room. Handling 10000 miles of pipeline reciepts and deliveries.

10+ Years Experience PLC Programming PC Board Testing/Repair Test Point Systems

Proficient in Microsoft Office Programs; Familiar with OSHA and NFPA federal standzards; Technical Skills; Research Skills

I am interested in employment for any position where I may acquire new skills or my current skills may be fully utilized. I have experience in Crush and Convey, Leaching, Haulage, Safety and Environmental areas. Upon my employment I will bring a safe and positive work ethic to your company.

QAQC Inspector. I have Experience on both LNG Termals and Oil Refineries

I have Masters Degree in Geology with experience in Coal Exploration.

My experience have given me a broad adaptation of works in various areas. I can and will succeed in almost every area of work as I am a practical and fast learner. I have sufficient knowledge in computer basics and literacy. I am a fast typist and can create text documents

This letter is to express my interest in applying for an oil rig job. I have an Irish national craft certificate and over 7 years experience as an electrician. Ideally I would like to gain employment within my trade as an electrician, however I am willing to start at the bottom and work my way up wi

Free! In excess of 15 years Health and Safety experience. Strong coaching. Leadership skills and experience in BBS. Experience includes large 3D programs in all types of terrain including mountains, Arctic, and cold weather conditions.

Survey Technician/Mapper/Drafter

Draughtsman - Piping / Architectural / Civil. with extensive number of years experience

Instrument Technician with Overseas Russian Experience.

Extensive working experience in Chemical Processing, Power Generation and Oil & Gas Industries. Versatile team player with an ability to incorporate new concepts and interact with all levels of professionals. Expertise in Project, Maintenance, Materials Management and ERP (SAP, MAXIMO, Primavera R3)

Over 20 years of experience in a career, dedicated to the provision of engineering services in the development of Maintenance Engineering and completing major projects. I am, most adept at successful employment in a multi-discipline environment.

Highly qualified HSE Contractor looking for overseas positions.

Environmental Consultant (Engineer/Scientist)/Geoscientist

pdms 3d cad autocad cadworx sr designer mechanical drafter field engineer walkdown

Professional Objective: To continue working as a Quality Assurance, Construction Representative, Pipeline Welding Inspector, Non Destructive Testing Inspector, Radiographic Interpreter, for a major proactive organization.

Mining & construction Equipment, Oil field production, Power generation

Journeyman Heavy Equipment Operator/Foreman 10 yrs exp.

Familiar in Auto cad (2D&3D), Microstation & Ms Office. Strong practical knowledge of Electrical. Good team player with supervisory skill

Results-driven Industrial Maintenance Planner/Scheduler offering 15+ years of extensive hands-on industrial maintenance experience, committed to efficiently manage and plan machine maintenance.

Livelink Administrator, Causeway Collboration Administrator

29 Yrs + Contracting within Materials Management & Logistics, Onshore, Offshore & Overseas currently employed upon a consultancy basis by Rolls-Royce having just completed a contract with “NSSE” where I had been their Materials Manager (see CV)

PARAMEDIC(ADVANCED LIFE SUPPORT)/FIREFIGHTER/ EMT RESCUE TECHNICIAN

Mining underground mucking hauling bolting and screening leading shotcreating and construction

I have project management experience in all phases of pump installations, well development, geothermal installs. I can run almost any type of equipment. I have worked at geothermal powerplants and mines all over the western states. I all keep my crews safe and productive. Can work well with others.

Man of many trades

i am having 13 years of experience in condition monitoring and in plant inspection includes vibration, vibration analysis, balancing, ndt, coating & corrosion and welding inspection.

I am a qualified diesel fitter with 5yrs exp and I trained with a caterpillar dealer.

Quality Control Senior Chemist

My qualification are heavy equipement technician specially on hydraulic system ,trouble shooting,repair modification and commisioning

4 years experinece in electronincs and electrical related works and in embeddeded sytems

17 years Electrical/Instrument experience including full-term 8000 hour apprenticeship with Electrical Trade Certification. Strong International background with involvement in the Power Generation, Petrochemical, Mining, Chemical Recovery and Off-shore Oil and Gas projects.

More than two years of experience in inspection works as a QA/QC Welding Inspector. Extensive experience gained in major onshore/offshore oil and gas construction projects, covering all methods of structural and piping fabrication, erection and inspection (Modules, CPP Decks/Topsides, Jacket & LQ).

All activities relating to Electrical Construction projects such as installation & commissioning of Electrical equipments namely generator, Transformer, HT. LT panel, Laying of power, Lighting cables & Lighting Fitting

Would like to personally discuss my qualifications and personal resume in greater detail and look forward to scheduling a personal interview with you in the near future. I have my T.W.I.C. Industrial safety Training. 24 hour Hazwoper/Forklift Certification. Confined Space Training;

I am a Civil Engineering Graduate from NED University, Karachi, Pakistan and hold a Master's degree in Environmental Engineering from USA. I have extensive professional consulting experience spanning over 10 years of EHS management and controls, involving Due Diligence reviews and audits, Environme

I have 5 years as a Cad Designer using Inventor 3D and AutoCAD

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 [ 17 ] 18 19 20 21 22

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out