Resume - Responsible for maintaining mining equipment and responsible for performing safe...

Misco Jobs

Resume #85807

CONTACT INFORMATION:
View contact information...

Age Date of Birth Place of Birth
Nationality Religion
Sex
Civil Status Height
Weight SSS No. TIN No.
Name of Spouse Address

47 years old July12, 1961
Pulilan Bulacan
Filipino
Roman Catholic
Male
Married
5'9"
170 Ibs.
03-6651349-3
188-737-348
Adelina Hernandez
245 Dampol B, Pulilan, Bulacan

Educational Background:

Vocational:

Bulacan College of Arts and Trade 1978 - 1980
Automotive Technician

Secondary:

Dampol 2nd High School 1974 - 1978

Primary:

Dampol 2nd Elementary School 1969-1974

Trainings / Seminars Attended:

July 1981 - December 1981

PNCC-CDCP

On the Job Training Basic on Hydraulic System

November 1991

Fire fighting
ABV Rock GR.P Kb Saudi Arabia.

Summary of Qualification

Has over 25 years of experience in the maintenance and repair of light and heavy equipment joining nine (9) companies spread over 25 years have acquired an extensive experience in maintenance and repair heavy equipment namely: TEREX, KENWORTH, CATERPILLAR, GROVE, SCRAPER, VIBRATORY ROLLER, TRAVEL LIFT, KHOERING CRANES, P & H, ISICHO CRANES, CMI ASPHALT FEVER, SIDE WINDER, CONCRETE PUMP, HINO, IZUSU DUMP TRUCK, MOTOR GRADER CAT, POCLAIN, BACHOE CAT, GARNER DENVER COMPRESSOR, DOZEN TEREX, EUCLID AND MOST RECENTLY ATLAS COPCO'S BOOMER MODEL #175 AND 178, CRAWLER DRILL 642 AND MITRO NOBEL TRUCK, ASPHALT PLANT, L120 VOLVO, HAMM, DYNA PAC.

Work Experience:

August 18, 2008
June 03, 2009 Heavy Equipment Mechanic
(Work Shop Dep't)
Coates Hire Operations
Lot 5 Torpe St,
Moranbah QLD
Australia

Job Description:

Responsible for maintaining mining equipment and responsible for performing safety Plant Operations, repairs and preventive maintenance and follow the procedures carefully reports to the supervisor any problem or trouble on his area of responsibility.

Duties and Responsibilities:

~ Ensure that the machine is well maintained, in good working condition, operated efficiently and safely.
~ To maintain heavy equipment such as Asphalt Paver (Titan 325), Road
Sweeper, Volvo Loader (L 120D) and Milling Machine.
~ Check oil and water regularly and keep the machine clean.
~ Operate the machine in satisfactory manner and hold appropriate license/s.
~ Report faults or problems to Supervisor as soon as they occur.
~ Report machine defects to Workshop.
~ Coordinate works and accept instructions from the Foreman
~ Ensure good housekeeping and safety practices in the work area.
~ Ensure that company policy and procedures are adhered to.
~ Carry out any assigned duties as required by the supervisor from time to time.
~ Prepares and submit daily, weekly and monthly reports.

August 2005 –
March 2007 Generator Mechanic
( Main Workshop )
I.A.P Worldwide Services
Camp Victory Biap
Baghdad, Iraq
APO 09342

Job Description

Responsible for maintaining the 20MW Catterpilar Site model 3516 series 400V:11KV and Cummins 28MW/11KV/50Hz 400V:11KV responsible for performing safety Plant Operations, repairs and preventive maintenance and follow the procedures carefully reports to the supervisor any problem or trouble on his area of responsibility.

Duties and Responsibilities:

~ Ensure that the machine is well maintained, in good working condition, operating efficiently and safely..
~ Check oil and water regularly and keep the machine clean.
~ Operate the machine in satisfactory manner and hold appropriate license/s.
~ Report faults or problems to Supervisor as soon as they occur.
~ Report machine defects to Workshop.
~ Coordinate works and accept instructions from the Foreman
~ Ensure good housekeeping and safety practices in the work area.
~ Ensure that company policy and procedures are adhered to.
~ Carry out any assigned duties as required by the supervisor from time to time.
~ Prepares and submit daily, weekly and monthly report

January 2000 – February 2004

Assistant Foreman
(Production Dept.)
North Luzon Expressway Project Anderson Aspha" Philippines, Inc. Pulilan Interchange, Brgy. Tibag, Pulilan, Bulacan

Job Description

Responsible for maintaining the biggest Asphalt plant in Asia with a capacity of 300 tonnes per hour and responsible for performing safety Plant Operations, repairs and preventive maintenance and follow the procedures carefully reports to the supervisor any problem or trouble on his area of responsibility.

Duties and Responsibilities:

~ Ensure that the machine is well maintained, in good working condition, operated efficiently and safely.
~ To maintain heavy equipment such as Asphalt Paver (Titan 325), Road
Sweeper, Volvo Loader (L 120D) and Milling Machine.
~ Check oil and water regularly and keep the machine clean.
~ Operate the machine in satisfactory manner and hold appropriate license/s.
~ Report faults or problems to Supervisor as soon as they occur.
~ Report machine defects to Workshop.
~ Coordinate works and accept instructions from the Foreman
~ Ensure good housekeeping and safety practices in the work area.
~ Ensure that company policy and procedures are adhered to.
~ Carry out any assigned duties as required by the supervisor from time to time.
~ Prepares and submit daily, weekly and monthly reports.

June 1998 – September 2000

Chief Mechanic
(Motorpool)
Housing and Land Development Project Elegant Star Corporation
Banangan, Sablan Benguet

Job Description

Responsible for maintaining h~avy equipment such as Bulldozer Model D 115, D85, Loader WA - 350-7 Avance Komatsu, Backhoe PC 200-7, Compactor. Dump Truck 360-12 cylinder Isuzu, Engine overhauling, under chassis and under carriage repair, hydraulic troubleshooting, light vehicle repair. portable air compressor, plate compactor and one bugger mixer.

Duties and Responsibilities:

~ Ensure that the machine is well maintained, in good working condition, operated efficiently and safely.
~ Check oil and water regularly and keep the machine clean.
~ Report faults or problems to Supervisor as soon as they occur.
~ Report machine defects to Workshop.
~ Carry out any assigned duties as required by the supervisor from time to time.

February 1994 – December 1998

Chief Mechanic
Housing and Land Development Project Prophil Development Corporation
Suite 312, Makati Executive Center cor., Herrera & Alfaro Sts., Salcedo Village, Makati City

Job Description

Responsible for maintaining 4 units of cranes namely P & Hand Kato RH25, engine overhauling, under chassis repair and under carriage. Hydraulic troubleshooting. Overhaul light vehicles and to maintain mixer trucks, Kubota welding machine and Vibrating compactor.

Duties and Responsibilities:

~ Ensure that the machine is well maintained, in good working condition, operated efficiently and safely.
~ Check oil and water regularly and keep the machine clean.
~ Report faults or problems to Supervisor as soon as they occur.
~ Prepares maintenance checklist and analytical report of equipments. ~Submits maintenance reports and overhauling jobs.
~ Prepares weekly report on material usage and equipments weekly check-up.

May 1993 – June 1994

Heavy Equipment Mechanic
(Main Workshop)
National fnviromental Preservation
BEEA'H (National Environmental Preservation) JubaiL Kingdom of Saudi Arabia

"

Job Description

Responsible for maintaining equipment such as Mercedes Tractor and trailers model 1924, 2632, 3232 OAF Tractor, turbo charger, Komatsu Bulldozer 0-85 A Forklift and loaders CAT 950B. Repair under chassis and under carriage repair and light vehicle repair.

Duties and Responsibilities:

~ Report faults or problems to Supervisor as soon as they occur.
~ Prepares maintenance checklist and analytical report of equipments.
~ Check oil and water regularly and keep the machine clean.
~ Submits maintenance reports and overhauling jobs.
~ Prepares weekly report on material usage and equipments weekly check-up.
~ Ensure that the machine is well maintained, in good working condition.
operated efficiently and safely.

March 1992 –April 1993

Heavy Equipment Mechanic
(Main shop)
Bridge
F.S. Foundation Specialist Plaridel. Bulacan

Job Description

Responsible for maintaining all the heavy equipment such as ISICHO Cranes, P &H and Khoering, Backhoe. Oumptruck. overhaul light and heavy equipment troubleshooting. Repair under chassis and under carriage repair, also responsible for maintaining the batching plant.

Duties and Responsibilities:

~ Prepares maintenance checklist and analytical report of equipments.
~ Check oil and water regularly and keep the machine clean.
~ Submits maintenance reports and overhauling jobs.
~ Prepares weekly report on material usage and equipments weekly check-up.
~ Ensure that the machine is well maintained, in good working condition.
operated efficiently and safely.

November 1991 – December 1992

Heavy Equipment Mechanic (Main workshop)
Saudi Strategic Storage
A.B.V. Rock Group KB.
P.O. Box 7816. Jeddah 21472, KSA

Job Description

Responsible for general reconditioning, overhauling heavy equipment such as Atlas Copco I s H-157 and H-178 Boomers, Crawler, Drills, Roc 642, Pneumatic Impact Machine, CAT Dozer, D8K and D7L P & H Crane, Sky lift and Shot Creek Mixer, Nitro Nobel Truck and Swevex Pump, Air Compressor and Teleporter.

Duties and Responsibilities:

~ Prepares maintenance checklist and analytical report of equipments.
~ Check oil and water regularly and keep the machine clean.
~ Submits maintenance reports and overhauling jobs.
~ Prepares weekly report on material usage and equipments weekly check-up.
~ Ensure that the machine is well maintained, in good working condition, operated efficiently and safely.

September 1990 - July 1991

Heavy Equipment Mechanic (Motorpool)
NIA Feeder Canal
PNCC
Imus, Cavite

Job Description

Responsible for maintenance and overhauling of heavy equipment such as Dump truck, Ken worth C for Model, Hino 7M20L Isuzu Grove RT 655, Poclain CK-150, P & Crane, Khoering Crane, Terex 82,30,82, 50 Model Bulldozer, Loader Model 7261, 7281 and also repair the under carriage and under chassis. Air system and hydraulic troubleshooting.

Duties and Responsibilities:

~ Prepares maintenance checklist and analytical report of equipments.
~ Check oil and water regularly and keep the machine clean.
~ Submits maintenance reports and overhauling jobs.
~ Prepares weekly report on material usage and equipments weekly check-up.
~ Ensure that the machine is well maintained, in good working condition, operated efficiently and safely.
~ Transmission, brake system, cooling hydraulic and fuel system.

July 1988 – December 1990

Heavy Equipment Mechanic
(Main workshop)
Construction and Gasoline Station Ibrahim Alhudaithy Est.
P.O. Box 224 Riyadh KSA.

Job Description

Responsible for maintaining all construction equipment. general reconditioning, overhauling both light and heavy equipment such as Bobcat. Loader. Dump truck, mixer truck and also repairing of European and American vehicles. See to it that quality repair was conducted on every vehicle being repaired. Perform engine tune up if necessary.

Duties and Responsibilities:

~ Prepares maintenance checklist and analytical report of equipments.
~ Check oil and water regularly and keep the machine clean.
~ Submits maintenance reports and overhauling jobs.
~ Prepares weekly report on material usage and equipments weekly check-up.
~ Ensure that the machine is well maintained, in good working condition, operated efficiently and safely.

July 1981 –
June 1988

Heavy Equipment Mechanic (Main shop yard)
Central Shop Yard
PNCC - CDCP
Bicutan, Taguig Metro Manila

Job Description

Equipment repair of all hydraulic crane RT 65, RT 60, Grove, KATO RH 25, Back Hoe, Poclain and 245 Caterpillar, Graders, 12G to 14G, CAT Bulldozer. Terex and Loader, Air Compressor, Garner Denver and Atlas Copco, repair of under chassis and under carriage repair. Overhauling both light and heavy equipment..

Duties and Responsibilities:

);> General reconditioning of all heavy equipment.
);> Check oil and water regularly and keep the machine clean.
);> Ensure that the machine is well maintained, in good working condition, operated efficiently and safely.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1 to 50 of 1092)

Go to Search Parameters...

Brief Description

Free! Twenty two years of mining and construction experience in both surface and underground. Mine Foreman and Blaster Gassy mines. Surface and underground blaster experience. Coal and Hardrock experience.

Free! Electrical Supervisor/Technician. Construction and Commissioning, Explosion Protection Certification

I am a very independent thinker. I enjoy challenges, actually, I thrive on them. I consider myself a very 'hands on' type of problem solver. Thinking 'Outside the Box' has always been my approach to difficult problems.

Master Plumber/ Master Pipe Fitter & Gas Fitter, Cert. 6G Welder

Responsible for maintaining mining equipment and responsible for performing safety Plant Operations, repairs and preventive maintenance and follow the procedures carefully reports to the supervisor any problem or trouble on his area of responsibility.

40 Years experience as a welder, 15 Years Sub-arc

Knowledge in repair, rewinding, servicing and maintenance of electrical equipment such as AC/DC motor and generator ranging from fractional horsepower up to 8000 HP low and high voltage, wet and dry type transformer, coils and etc.

Free! Welder

Ase Master Mechanic 22 years

Licensed Journeyman Electrician, thirty four years experence, Industrial, commercial, residential, and oil field

electrical contractor for 25 years and have a ton of experience in the electrical field.

Pressure Welder, Pipe Welder with 20+ yrs experience, Hard working

heavy equipment operator sewer and water forman

hi looking for job

Electrician

I am a traveling supt. looking for someone to utilize my skills. I am an excellent problem solver and work well under pressure.

FIMILIAR WITH ALL TYPE OF SURVEY EQUIPMENT

Welding, fitter, sheet metal fab. and steel worker.

Journeyman/Red Seal B Pressure Welder

Field Operations Manager with 20 years experience in the civil and concrete foundation business. Strong technical and hands-on expertise in various different forming systems which include plywood, aluminum, steel and tunnel. Detailed knowledge of site work and concrete placement.

Equipment operations

Maintenance Welder/Fitter with strong background in Plant Maintenance

electrical /instrument superintendent

Climb and rescue certified Class II OSHA 30 hour construction C-Stop 10hr BOP-ARSC-OSHA-10hr. first aid certified CPR/AED adult certified Safety Inspections Quality Control NCCCO certification number: 070431577 Mobile Crane Operator Proficient on a computer (MS Word, Excel power point)

Electrical Superintendent

Primavera Scheduler P3 to P6 and certified in P6

To obtain a full or part time position as an Estimator with a growing company where my years of experience and professional skills will be utilized

TURRET PRESS AMADA EXPERT,ARIES,COMA,VELLA,PEGA,VIPROS,2510

skilled tradesman. Mobile/Tower crane operator, Heavy duty equipment mechanic, Rigger, Inspector, Apprentice Millwright

30 plus years experience with heavy equipment both as an operator and supervisor.

20 years signalling experience with IRSE licenses and Signal Maintainer certificate. SPONSORSHIP PREFERED.

My education qualifications, career training, knowledge and acquired skills would be suited to position in your company (Former Soviet Union: Kazakhstan, Russia).

I have been in the excavation industry for over 30 years having owned my own Excavation company for 16 of those years. I can operate a variety of equipment as seen on my resume

scaffolding supervisor / co-ordinator /instructor

Over 25 years experience in automotive, heavy equipment, and tractor / trailer repair, maintenance, and rebuilds. Repair, maintenance, and diagnostics on all types of heavy equipment / tractor trailer in shop and field service. Rebuild on all types of engines to include Caterpillar, Cummins / Detro

Professional Surveyor & Mapper, Thirty years experience. Construction Layout, Quanity Surveys, As-built Surveys.

Over 20 years as an industrial electrician

Experienced in deep excavations for 20 years, specializing in sewer and water and installation of large diameter pipe, as well as Mass excavation and Heavy Highway work.

I am presently working VOLTAGE ENGINEERS LTD AT DOHA QATAR) as plant engineers / Automobiles maintenance engineers .managing a of workshop Transports in charge ( Company- Oil , Gas / power, infrastructure/ Energy/ Constriction. automobiles )

Heavy equipment operator

Heavy equipment - mining

Over 20 years operating track hoes, dozers, loaders, rock trucks, etc., in construction of water treatment, sewer plants, and road construction.

heavy equipment operator for over 25 years. Have many skills in heavy highway construction, mining of gravel pits, haul trucks, bull dozers, blades,trackhoes, etc.

30 years expierience in concrete, commercial, residential.

Over 20 years of experience in diesel engines ,marine propulsion system and generator set working in the middle east and gulf region for more than 15 years U.A.E and Saudi driving license a valid resident in U.A.E read ,write ,speak English , Arabic ,German

Estimating project managing scheduling coordination with general owner to make sure schedule can be met purchasing preparing submittals laying out preparing ASI's RFI's RFP's completing project from start to punch list.

run different types of cranes. friction, tower, experience in pile driveing. 30 yrs.e xperience

I can run just about any kind of equitment you have To do a job in construction, I ran a crew of 20 men for 6 year's and built forms, poured concrete,built house's and metal buildings I can read blue print's I do have about 2 year's of oil field exp. Motorman and Floorhand, Some Driller asst. exp.

I am a Heavy Equipment Operator, I have been in the Land Development Industry for over15 years, I have operated scrapers (657, 651) I have operated rollers, water wagon, rock truck ( material haulers) on Landfill, Subdivisions, Highways, Dams, and Golf Courses.

Hands-on and Classroom training in Welding,Blueprint Reading,Pipefitting,Machineshop, and Residential Wiring

[ 1 ] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out