Resume - Preparation of documents, materials,and equipments.hauling of materials., Sched...

Misco Jobs

Resume #86244

CONTACT INFORMATION:
View contact information...

Position Applying for: PIPING SUPERVISOR

PERSONAL INFORMATION

Date of Birth: November 16, 1959
Age: 49
Civil Status: Married
Spouse: Loline M. Silang
Nationality: Filipino
Sex: Male
Height: 5'6"
Weight: 85 kg
Seafarer's Identification and Record Book: A192967
Issued at: Manila, Philippines

Educational Attainment: College Level

WORK EXPERIENCE

SETE ENERGY SAUDIA FOR INDUSTRIAL PROJECTS LTD.
P.O. box 5166, Jeddah 21422 – Saudi Arabia. Tel (00966-2) 622 0022/ 699 0353
Fax: (00966-2) 234 0271

POSITION: PIPING SUPERVISOR
INCLUSIVE DATE: 23 May, 2008 – 09 February, 2009
PROJECT: KAUST Central Plant

Duties and Responsibilities

Piping Supervisor
1.Supervise and monitor the construction and erection of underground and above ground piping.
2.Checks the GA plan drawing and Quality Control ISO drawing prior to the installation and erection of U/G & A/G piping.
3.Coordinates w/ Engineering Group and DCG regarding the latest revised ISO drawings as well as the FMR' s for the withdrawal of materials.
4.Coordinates with various sections such as Civil Structural, Instrumentation, Electrical, etc. regarding the modifications when piping interference occur.
5.Check the assembly and erection of piping installation on schedule, referring to applicable codes for tolerances and stresses.
6.Conduct Toolbox Talk daily and implements safety procedures and housekeeping in the area of responsibility.

Technical Assistant
1. Coordinate with materials section for the forecasting of materials status, order and receive, follow materials required by the project.
2. Receive instructions from Engineer / Supervisor for the updating of accomplishing reports.
3. Highlight the isometric, plan drawing and do the weld mapping progress tracking per daily welding accomplishment report.
4. Locate the spool coming from the yard and mark the column and equipment no. and coordinate with rigging foreman for the unloading of incoming spool and materials.
5. Assist QC for the listing of Punch list item.
6. Checking welding inspection report (WIR & PIR)
7. Guide to borescope team.
8. Check field change and notice (FCN)
9. Assist to operator pre-com and commissioning.
10. Assist QC for the listing of Punch list items and any kind of support.

CONSOLIDATED CONTRACTORS INTERNATIONAL CO. &
TEYSEER CONTRACTING CO. W.L.L – J.V.
P.O. Box 60785, Ras Laffan – Qatar. Tel: 4740111-397-399- Fax:4740160/239109

POSITION: PIPING SUPERVISOR
INCLUSIVE DATE: 19 May, 2006 – 15 February, 2007
PROJECT: Qatar Gas II Development Project (QGX II)

Duties and Responsibilities

Piping Supervisor
1.Supervise and monitor the construction and erection of underground and above ground piping.
2.Checks the GA plan drawing and Quality Control ISO drawing prior to the installation and erection of U/G & A/G piping.
3.Coordinates w/ Engineering Group and DCG regarding the latest revised ISO drawings as well as the FMR' s for the withdrawal of materials.
4.Coordinates with various sections such as Civil Structural, Instrumentation, Electrical, etc. regarding the modifications when piping interference occur.
5.Check the assembly and erection of piping installation on schedule, referring to applicable codes for tolerances and stresses.
6.Conduct Toolbox Talk daily and implements safety procedures and housekeeping in the area of responsibility.

Technical Assistant
1. Coordinate with materials section for the forecasting of materials status, order and receive, follow materials required by the project.
2. Receive instructions from Engineer / Supervisor for the updating of accomplishing reports.
3. Highlight the isometric, plan drawing and do the weld mapping progress tracking per daily welding accomplishment report.
4. Locate the spool coming from the yard and mark the column and equipment no. and coordinate with rigging foreman for the unloading of incoming spool and materials.
5. Assist QC for the listing of Punch list item.
6. Checking welding inspection report (WIR & PIR)
7. Guide to borescope team.
8. Check field change and notice (FCN)
9. Assist to operator pre-com and commissioning.
10. Assist QC for the listing of Punch list items and any kind of support.

AL -HASOUN SE-JONG ELECTROMECHANICAL EST
P.O. BOX: 34794, ABU-DHABI-U.A.E.

POSITION: PIPING SUPERVISOR
INCLUSIVE DATE: 17 March, 2005 – 16 September, 2005
PROJECT: UMM AL–NAR IWP project, Abu Dhabi, U.A.E

Duties and Responsibilities

Piping Supervisor
1.Supervise and monitor the construction and erection of underground and above ground piping.
2.Checks the GA plan drawing and Quality Control ISO drawing prior to the installation and erection of U/G & A/G piping.
3.Coordinates w/ Engineering Group and DCG regarding the latest revised ISO drawings as well as the FMR' s for the withdrawal of materials.
4.Coordinates with various sections such as Civil Structural, Instrumentation, Electrical, etc. regarding the modifications when piping interference occur.
5.Check the assembly and erection of piping installation on schedule, referring to applicable codes for tolerances and stresses.
6.Conduct Toolbox Talk daily and implements safety procedures and housekeeping in the area of responsibility.

Technical Assistant

1. Coordinate with materials section for the forecasting of materials status, order and receive, follow materials required by the project.
2. Receive instructions from Engineer / Supervisor for the updating of accomplishing reports.
3. Highlight the isometric, plan drawing and do the weld mapping progress tracking per daily welding accomplishment report.
4. Locate the spool coming from the yard and mark the column and equipment no. and coordinate with rigging foreman for the unloading of incoming spool and materials.
5. Assist QC for the listing of Punch list item.
6. Checking welding inspection report (WIR & PIR)
7. Guide to borescope team.
8. Check field change and notice (FCN)
9. Assist to operator pre-com and commissioning.
10. Assist QC for the listing of Punch list items and any kind of support.

HYUNDAI ENGINEERING & CONSTRUCTION CO., LTD
P.O.BOX: 1275,BENGHAZI, LIBYA.

POSITION: PIPING SUPERVISOR
INCLUSIVE DATE: 30 October, 2003 – 26 October 2004
PROJECT: Attahaddy Gas Field Development Project
South of Marsa El-Brega

Duties and Responsibilities

Piping Supervisor
1.Supervise and monitor the construction and erection of underground and above ground piping.
2.Checks the GA plan drawing and Quality Control ISO drawing prior to the installation and erection of U/G & A/G piping.
3.Coordinates w/ Engineering Group and DCG regarding the latest revised ISO drawings as well as the FMR' s for the withdrawal of materials.
4.Coordinates with various sections such as Civil Structural, Instrumentation, Electrical, etc. regarding the modifications when piping interference occur.
5.Check the assembly and erection of piping installation on schedule, referring to applicable codes for tolerances and stresses.
6.Conduct Toolbox Talk daily and implements safety procedures and housekeeping in the area of responsibility.

Technical Assistant
1. Coordinate with materials section for the forecasting of materials status, order and receive, follow materials required by the project.
2. Receive instructions from Engineer / Supervisor for the updating of accomplishing reports.
3. Highlight the isometric, plan drawing and do the weld mapping progress tracking per daily welding accomplishment report.
4. Locate the spool coming from the yard and mark the column and equipment no. and coordinate with rigging foreman for the unloading of incoming spool and materials.
5. Assist QC for the listing of Punch list item.
6. Checking welding inspection report (WIR & PIR)
7. Guide to borescope team.
8. Check field change and notice (FCN)
9. Assist to operator pre-com and commissioning.
10. Assist QC for the listing of Punch list items and any kind of support.

KHARAFI NATION CO. FOR MECHANICAL & ELECTRICAL WORKS
P.O. BOX 24081, Safat 13101

POSITION: PIPING FOREMAN / TECHNICAL ASSISTANT
INCLUSIVE DATE: 16 June 1996 - 07 August 1997
PROJECT: 770 MT/D
1097- Air separation Plant
1088- Underground Piping
CONTRACTOR: Flour Daniel Intl. Ltd.

Duties and Responsibilities

Piping Foreman

1. Receives order from Supervisor / Engineer and give instruction to pipe fitters and makes sure that they are doing their job according to drawing.
2. Organize manpower and make crew grouping and insure that they are working to their maximum capability.
3. Double check the drawing prior for installation, request the materials tools to supervisor and give suggestions for easy installation / erection to the spool.
4. Coordinate with other foreman for the schedule of equipment in order to attain maximum equipment utilization.
5. Attend progress and safety meeting and share the experience to the other workers.
6. Responsible for the supervision for the installation / erection of pipe rack piping, column, vessel, exchanger, piping correction to pipe rack and pump, compressor piping both for stainless steel, carbon steel and alloy steel.
7. Experience for the installation of underground piping for sewer line, firewater line and oil water sewer line with the materials like cement line piping, cpve, resin and GRE piping.

KELLOGG PLANT SERVICES, INC.
P.O.BOX 47102 Fahaheel, Kuwait 64022

POSITION: INSTRUMENT MECHANIC
INCLUSIVE DATE: 13 May 1989 – 27 May 199

PROJECT: Maintenance of Kuwait National Petroleum,
Co.

333 Description:
Work in maintenance of different instrument such as controller, transmitter, switches installed in the refinery. Overhauled and repaired control valves, P.D. meters, masoneilan leveltrols and other pneumatic instruments such as dead weight tester, thersmosbath. Wallace and tieman pneumatic calibrator and instruments used in the calibration. Calibrated position and current converter.

ONNINEN OY INTERNATIONAL PRROJECT
P.O. BOX 28050 Al Daoudi, Baghdad, Iraq

POSITION: Pipefitter / Plumber
INCLUSIVE DATE: 14 August 1983- 18 January 1984
PROJECT: Sport Hall Bomb Shelter

Job Description:

Layout fabricated and installed different kinds of pipe materials of different diameters from small to large bore pipes. Installed stainless and alloy steel pipes prior to welding. Assisted welders in preparation of urging gas. Worked in sewer line drainage pipes such as PVC and electrical pipes for telephone lines all in conformance with drawings.

TAKADA INDUSTRIES, LTD.
Baije, Baghdad, Iraq

POSITION: Pipefitter
INCLUSIVE DATE: 14 September 1981 – 16 September 1982
PROJECT: Scope North Refinery

Job Description:

Layout fabricated and installed different kinds of pipe materials of different diameters from small to large bore pipes. Installed stainless and alloy steel pipes prior to welding. Assisted welders in preparation of urging gas. Worked in sewer line drainage pipes such as PVC and electrical pipes for telephone lines all in conformance with drawings.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 51 to 100 of 1093)

Go to Search Parameters...

Brief Description

An experienced planner, purchaser and qualified welder/instructor as per NAVSEA/DoD standards in SMAW, GMAW, GTAW. With eleven years of US military experience, a Bachelors Degree in Mechanical Engineering (Inter-American University of Puerto Rico, 1998), fully bi-lingual (English/Spanish)

I am skilled in carpentry, concrete forming, metal studs and drywall, scaffolding, etc. However, I also have expeirence in reading blueprints and filing out reports.

With Engineering degree and experience in Construction of Petrochemical, Gas Plant and MODU (Jack-up and Semi--Submersible) in the field of Piping, Welding and Painting. Can be able to work either in Engineering, Supervision and Inspection works.

Water well driller, T4, TH60, CP RT1800, Air & mud rotary, DTH, Under reaming

To collect quotations from parties. Mainly three quotation for single items And prepares relevant comparison sheets.

Electrician management

•A proven track record of success in international construction projects spanning 14 years. Highly capable in any role from hands on tradesperson to Project Management. Certification in a trade (Plumbing) and a Civil engineering diploma.

Scaffolding Supervisor, Safety Adviser

Over 20 years experience in the coating’s industry. I have extensive experience in supervision, project management, and inspection of coatings.

Working as a Site manager / Supervisor / Inspector of Scaffolding & Rigging. Having extensive 20 years working experience in the respective fields.

Thorough knowledge of the operational characteristics and capabilities of heavy construction equipment to include, but not limited to cranes, backhoes, front – end loaders, dump trucks etc.

Experienced HVAC

My employment at present involves preventative maintenance, fault diagnostics and repairs on loading equipment and terminal automated system (TAS) within a fuel storage area.

Responsible for Receiving, Storing, Issuing, Stock Inventory for all types of Materials for M/s TECHNIP, BECHTEL, GASCO, NPCC (Piping, Instrument, Electrical, Structural steel, Equipments etc. Maintaining uptodate stock Records updating stock

Auto Electrician, Auto Mechanic, Heavy Equipment Mechanic

Safety Manager

Quality control inspector

I am seeking a responsible position that is both challenging and an opportunity to share in the rewards of successful performance in an area where creativity and business experience will be of an immediate value to the organization. I have 25 years of electrical experience

Senior Construction Project Manager

Worked In Cama Motor ¡V A¡¦ bad as Diesel & Petrol Mechanic under Apprentice Act 1956 for 1 year [i.e: 01/10/2005 to 30/09/2006].

Time served and fully qualified NVQ 3 Rigging & Lifting Supervisor, appointed person, trained trainer, with over 30 years behind me in the industry on and offshore, on many world wide locations.

I am applying for a Maintenance Supervisor, Chief Mechanic or Rig Mechanic position. Please see my attached C/V. I am very interested in working offshore but have 7 years experience on land rigs. I do have my BOSET course and have updated my other certificates. I realize that I don’t have the offsho

Preparation of documents, materials,and equipments.hauling of materials., Schedulling works. fabricate, erection, installation.

Internationally Experienced Heavy Equipment Mechanic - Workshop Supervisor

Heavy equipment operater excavater,backhoe any controls, all dozers, scrapers, finish blade hand project manager,estimater, under pipe line superintendant,mass grading superintendent

Coatings Contractor

I can maintain, repair, disassemble & rebuild any piece of Heavy Equipment, Mining, Drills, Scoops, Shovels, loaders, dozers, Tractors, earth moving equipment, on & off road, transport trucks & trailers, logging, forestry, & construction. Propane, Diesel, Gas, Electric, and Hydraulics,& more

I have over 20 years experience in all aspects of electrical work i.e. construction, testing and inspection and commissioning both at home and abroad, onshore and offshore.

API-510 / AWS-CWI

profficient in construction administration: forrensically challenged change orders, estimating, cosy analysis, site supervision, pre con and pre bid meetings, bid analysis, plan reading, and quality assurance

Safety Director, Electrical Construction

Construction Resumé

Welder ***16 Years Experience***

Coordinating the efforts of the technical staff assigned to the project, planning, assigning, reviewing, evaluating and training staff in work procedures;

I have Thirty (30) years of experience in the surveying field, to include Boundary surveying,

Fork Lift Operator and Material Handler

concrete/steel laborer, welder, machinist, truck driver.

Seeking work as heavy equipment operator. Willing to travel. Excellant references.

Electrician Technician

QUANTITY SURVEYOR

I believe that my key qualities are my excellent interpersonal skills and strong communicative ability, combined with my talent for effective organisation and prioritisation.

I’m experienced metal fabricator/boilermaker with skills in fabrication, assembling, constructing, installing, erecting, demolish, repair, marking out, aligning and maintaining a wide variety of vessels, tanks, towers, boilers, hoists and other structures.

Qualified welder 10 years experience ( QC, NB, AB) pipe welder , willing to travel

I am a 29 year old white Kenyan. I am a Logistics consultant specializing in Warehousing and Mechanical handling training.

Heavy Equipment Operator

Arc welding all positions all 60 series, 70 series, and 80 series welding rods. Torching and brazing. Rigging of all materials over head either from crane or chain falls or sky track indoor and outdoor. Certified in erecting scaffling. Excellent in layout for installations. Certified in rigging, aer

Journeyman Plumber and Gasfitter

Maintenance Manager/Welder Skills include Management, Design, welding, machinist, hydraulics, electrical, HVAC, mechanical, fabrication,and construction.

Responsible all electrical installations, wiring, piping, motor control

More than 18 years of experience of welding operation such as Supervision & QA/QC Department in Power Plant, Refinery Plant, Petrochemical Plant, & GAS plant.

1 [ 2 ] 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out