Resume - Journeyman Ironworker with exsperience in boilermaker, pipefitter work

Misco Jobs

Resume #86688

CONTACT INFORMATION:
View contact information...

Experience Zachry
April 2009 - May 2009 Ironworker/Rigger Foreman St John's, AZ
* Shutdown and overhaul on unit one
* Over looked a crew of 14 Journeymen iw/riggers and two helpers
* Had 4 men on the ground working with 180 ton tower crane, 40 ton crane, fork lift etc.
* Objective was to rig up, removed and replaces superheat and reheat boiler panels from unit one.
* 2 men staged outside of the unit to transfer the load either from the monorail system to the tower crane for removal of old panels or the reverse from the tower crane to the monorail leading in to the boiler.
* Made sure everyone was using correct rigging and following the correct procedure of rigging whatever item at the time.
* Keep track of time sheet, material, man hours, progress reports and safety of the men and people working around or in the area.
* Other places we were needed or lend a hand to other crews, the crew and I relocated to that area.
* Rigged up material equipment, beams, duct work, etc and transferred them to where they go with chain falls or coma longs.

Shurleft and Andrews
November 2007 - March 2009 Ironworker Connecter/Structural Welder Springerville, AZ
* New construction
* Unit 4
* Erect columns, beams, x brace, girt, tanks.
* Bolt up and rattle bolts to specified specs.
* Cut, weld, fab, and did lay out with raw material.
* Read prints, ground erected sections, conveyor tubes, conveyor bents, etc.
* Used plum cable, coma longs and other tools as needed to plum up structure.

Great Western Iron Works
June 2007 - November 2007 Ironworker Foreman Phoenix, AZ
* Looked over erecting or columns, beams, girt, metal sheet decking, etc.
* Did time sheets.
* Set up cribbing for cranes, inspected rigging equipment, material, and proper rigging procedures.

Arc Welding Specialists
May 2007 - June 2007 Ironworker/Rigger Vernal, UT
* Shutdown
* Moved and replaced coal pulverizer ducts and add on new platforms, walk ways, and stairways.
* Removed expansion joints and replaced with bull rigging.
* Used ironworker hand tools, rigging chain falls, coma longs, shackles, etc.
* Shutdown complete.
* Got an ROF

TUV SUD Industry Service
March 2007 - May 2007 Ironworker/Rigger Moapa, NV
* Add on to an existing power house.
* Erected columns, beams, support bracing, pipe supports, pipe hangers, welded knife clips to existing iron.
* Welded duct work, pipe from 2" to 16" foot dia. pipe.
* Worked with 120 ton grove crane.
* Unloaded material from incoming semi trailers.

Ashton Company
January 2007 - March 2007 Ironworker Connecter Hayden, AZ
* Tear down of a copper smelter cover part of the copper mine.
* Remove of old material that collapse that existed of columns, beams, piping, duct work, etc.
* Erected new material.
* Did rigging with a 777 Manitowoc crane
* When completed, got an ROF.

Turnaround Welding Services
January 2006 - April 2006 Pipefitter Memphis, TN
* Refinery.
* Worked 2 shutdowns for them.
* In El Paso, TX and Memphis TN.
* Fit pipe from print or field layout pipe.
* Installed pipe hangers, supports, brace, etc.
* Prep, bevel, and fitted s" pipe and hp pipe.
* Bolted, installed, and replaced gaskets.
* Rigged pipe and worked with cranes.
* Either cherry pickers to 120 tone grove.

Industrial Renewal Service
January 2006 - January 2006 Rigger/Pipefitter Philadelphia, PA
* Shutdown.
* Trash plant.
* 2 weeks.
* Replace and installed superheat and rear reheat boiler tubes and welded membrane.
* Did plug welds, socket welds, etc.
* Did pre outage as to layout and stage materials such as welding machines, welding lead, cutting torches, extention cords, chain falls, coma longs, etc.
* After outage complete rolled up material and loaded up company trailers.
* Got an ROF.

Education chinle high school
May 2000 High School all subjects chinle, AZ

additional info. * journeyman ironworker card available
* have experience with forklifts, jlg's, manlifts, welding machines, oxy-acetylene torch
* have gotten osha and msha training and certificates
* have personal tools
* have more job history starting from 2000 if needed

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 151 to 200 of 1081)

Go to Search Parameters...

Brief Description

Master Operator with exceptional work ethic.

NDT Level II Magnetic Inspection and Penetrant Inspection

I am searching for employment with a company that has satiability and longevity.

Over Ten (10) Years of solid working experience in the sales and customer service environments for Radiology Equipment & Spare parts, Laboratories Equipment & Accessories, Nuclear Medicine, and QC/QA Test Tools. Maintain excellent customer service skills and a proven record as a top sales performer.

Skilled painter with experience in the industry.

Heavy equipment operator over 20+, Body Work and Custom Paint 20+ and Welder 10+

Five years experience as a Journeyman Boilermaker, working as a welder, rigger and mechanic. I also have 18 yrs. experience in glass manufacturing where I started as a maintenance mechanic and worked my way up to batch and furnace Dept. manager.

I have been in electrical construction for 12 years, 3 years in management of electrical construction. I am interested in working overseas for short or long term projects. Please call with any interest.

NVQ level 2 Scaffolder with 8 years experience and offshore experience. Offshore survival and full medical

Computers, home building from foundation up. Media instalations (cable industry work)

Bulldozer Operator, performed pre and post operation of the bulldozer

Qualified Boilermaker/ Welder, with over 25 years experience, mostly on mines and construction.

Selling Skill, IT-Presales, Management

Automotive and Locomotive Mechanic - Knowledgable and Reliable

19 yrs. experience in the construction industry as a foreman/heavy equipment operator/mason Extensive training to accurately and safely operate heavy equipment First Aid and CPR Certified

I have over ten years experience in the building and facility maintenance and management. I hired and trained technicians for HVACs; Carpentry, Plumbing, Electrical, Appliance Repairs and Mechanical. I graduated from vocational high in Air-Conditioning and Refrigeration.

Plate welder (SMAW,FCAW,GTAW)

Eleven years of hands-on experience and proficiency with Autocad Architectural Desktop, including version 2008

welder

Experienced sandblaster/painter/foreman/safety tech

Knowledgeable in fossil fuel (coal), power plant bulk materials operations. International experience.

Ironworker, sheetmetal mechanic

project in erection, maintenance and up gradation project of 40 MW power station and

Over 16 years of experience in leadership roles within complex operations, supervising diverse teams and managing challenging programs/assignments within U.S and international locations

I am a skilled solid tradesman with a solid family looking for interesting ,rewarding employment.

5 year appreniceship as diesel mechanic. 5 years experience as engineer in British Merchant Navy .Conversant with Caterpillar, Terex, and Aveling Barford earthmoving equipment , various supervisory positions worldwide in different disiplines

journeyman lineman service, const, underground cdl cpr overhead switching

I am searching for offshore employment as a crane operator. My specialty is the Tower Crane. I have operated many types of cranes up to 250 ton.

MILLWRIGHT Detailed oriented Gold and Red Seal (V1984) experienced Journeyman Millwright Foreman with experience in construction and petrochemical plant environments.

Mechanical Master, Master Gasfitter

Electrical

NEW CONSTRUCTION Bending, cutting, threading, and installing Rigid, EMT, IMC conduit, designing, cutting and installing aluminum, galvanized, and stainless steel cable tray. Grounding systems, Lighting, Installation of panels, Junction boxes

I have 17 years experience in construction and mechanical applications and would like to explore overseas opportunities.

I have worked overseas and liked it. I have a pass port and a working visa for Brazil. I built a rollercoaster in Brazil. I had 30 carpenters and 15 helpers that didn't speak nor could i speak theirs. but we built the coaster.

See Attached Resume

Free! crane driver, rigger,trades assistant,forklift driver , basic scaffolder

Certified NAHETS graduate. Completed level I & II and am certified to operate the following: skid steer, backhoe, wheel loader, all-terrain forklift, excavator, bulldozer, motor grader, water truck, and off-road rigid and articulating dump trucks. I hold a current Class B NV CDL and medical card.

I am a Diploma electrical engineer and diploma software engineer. I have also completed courses of PLC/SCADA and CAD/CAM . I have been working as a testing engineer of a Distribution and power transformer since last 7 years.

Commissioning of Electrical, Electronic control, Instrument and Safety System

Class a CDL, Ecavator operator, Concrete Foreman,

I have 34 yrs Crane Operator experence, 4 yrs Crane, Rigging, & Mechanical Trainer experence. I have offshore crane operator exp. and onshore crane operator exp.

ERP, Consultancy, Movex, HumanResources Implementation, Payroll Implementation, Managment, Consulting Services, Independent

Worked on Procedure High Pressure Vessels, pipe welding,Millwrights, Mine Maintenance Supervisor Worked for 5 years (1994-1999) Steam and pressure pipe fitter, welding

Great expierience and offshore back ground

Drafter, Designer, AutoCAD, Revit, CADD Manager, VB, VBA, AutoLisp, Access database, MS Office

My most recent experience was repair and maintenance on board a Tanker vessel, Livestock and Reefer Ship. I was responsible for all the hot work and repair, including the use of Manual lathe machine

Electricial field 18 years, licensed journeyman since 1992, residential, commercial and industrial

I am confident , professional heavy equipment operator , with over 15 years experience in a wide range of fields .

Highly skilled carpenter 17 years experience. Related work includes structural steel erection, connecting and rigging. Poured concrete, scaffold set up and tear down, foreman for residential housing from framing to finish carpentry.

Journeyman Ironworker with exsperience in boilermaker, pipefitter work

1 2 3 [ 4 ] 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out