Resume - Extensive skills in composites, operations management, plant management, as well...

Misco Jobs

Resume #88436

CONTACT INFORMATION:
View contact information...

OBJECTIVE:
I seek a solid, stable, challenging career with a company that recognizes and rewards dedication, creativity, hard work and going above and beyond.

PROFILE:
Extensive background in virtually all high performance composites: Kevlar, S-Glass, E-Glass, Carbon Fiber, Unidirectional, Biaxial, Triaxial, Quadaxial materials in Standard and pre-pregs, as well as processes: Open Molding: Hand Lay-Up, Spray-Up, and Closed Molding.
Skilled in troubleshooting and problem resolution; training and management of Composite Technicians, Spray System Operators, Vacuum Bagging Technicians and Open Molding Laminators, quality control, adherence to work order specifications, and equipment maintenance with a primary focus on MVP spray system / pump system equipment.

EMPLOYMENT:
Sankuer Composite Technologies (SCT), Fair Haven, MI – Outside Consultant / Project Manager – Aug 2009 to present
SCT deals primarily in the manufacturing of high performance composite parts, tooling and limited run prototyping. Carbon Fiber, Kevlar, S-Glass, epoxies – high and normal temperature cured, pre-preg's, closed and open molding and RTM.
My responsibilities at SCT included:
Building a complete set of prototype race car tooling, built entirely of epoxy. Went on to build the first set of parts pulled from the tooling made of Carbon Fiber and Nomex Honeycomb, low temperature post cured.

Sunsation Performance Boats, Algonac, MI – FRP Operations Manager – 3/04 to 12/08
A privately owned high performance / pleasure boat manufacturing company known in the industry for its attention to detail, commitment to customers and strong work ethic, as well as for their near zero warranty issues.
I was responsible for the selection, training, performance management, counseling / disciplinary actions, salary administration, quality control and daily administration of the lamination division. Lead, direct and manage site operations. Maintained a professional and safe working environment by inspecting and scheduling maintenance, and ensuring that all equipment is in safe working condition. Utilized superior communications skills to motivate staff and develop effective working relationships with peers, executives and clients. Addressed all employee performance problems promptly and directly in accordance with company personnel policies and procedures.
I trained and supervised 20+ employees in all aspects of boat building, spray system operation and the production of 28', 32' and 43' high performance offshore powerboats.
I scheduled projects to maintain a streamlined and on time system of boats going through production and had to perform final inspection on all composite parts from bare molds to finished blanks.
I handled the ordering of all materials, supplies and tools necessary to run the day to day activities involved in lamination.
As a Sunsation Safety Committee member I attended regular meetings, filled out accident reports and was responsible for prevention and safety measures.
As a member of the Management team, I worked alongside the owners and upper management of the company to key in on problem areas companywide that caused waste / excess cost.
I processed, organized and scheduled day to day operations along with projecting and forecasting future goals using a PC.
Sunsation "F4" development team member – primarily responsible for designing / introducing the laminate schedule / materials used on the 43' – F4 model, built advanced ceramic / fiberglass hybrid molds for the F4 project, ensuring that they went through the lamination division without slowing down or interrupting the day to day operations and production.
I was credited with numerous process / protocol / laminate schedule contributions as well as the introduction and implementation of advanced techniques and procedures.
I worked on sales, promotional and marketing concepts, products and correspondence.
I also was responsible for researching, testing and evaluating new materials and processes as well as new technologies.

Ocean Express Powerboats, Algonac, MI – Plant / Operations Manager – 8/1991 to 3/2004
A family owned and operated high performance / pleasure boat company building high speed custom offshore catamarans. The founder and company are credited with building the first all composite catamaran in the world. Their models went on to win several world and national championships, and hold a kilo record.
As the Manager for Ocean Express, I worked throughout the company in many various roles: lamination, tooling, design, sales, research, development, testing and evaluating, finance, delivery. As a family member, no role was above or beneath me in my time there.

RECOGINITION:
Sunsation's "F4" model went on to win two separate "Powerboat of the Year Awards" at the 2007 Powerboat Magazine Awards Ceremony. This is the first time that a single boat has ever been awarded two awards in the same year.

TRAINING:
One-minute manager courses
Lean Six Sigma courses
CCT-M (Certified Composite Technician – Marine through ACMA)
Closed molding courses
CPR certified

EDUCATION:
St Clair County Community College
Macomb County Community College
ACMA – CCT School

ORGANIZATIONS:
Volunteer work through local VFW halls, "soldier benefit" dinners
Freedom Kayaks – I do non-profit work for a local Kayak builder that builds disability engineered kayaks

PROFESSIONAL REFERENCES:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 451 to 500 of 1096)

Go to Search Parameters...

Brief Description

I am an advanced Scaffolder (CISRS), Advanced Scaffold Inspection, Risk Assessment Trained, and am Computer Literate. I have an extensive understanding of scaffolding and design, the importance of health and safety and the best ways to achieve the goal of supplying clients with a cost effective and

Construction Management/Estimating/Supt/PM

Experience in pipeline, Power Plat Installation

I want to find work Overseas in the Tower Construction Field.

I am seeking Medical Advisor/Occupational Health position to continue my occupational physician’s career with a multinational company.

Welder Fitter, with pressure certification (F3/F4 on 5G uphill progression -mild steel). Worked in fabricating shop on commercial and industrial products. Very proficient with GMAW and SMAW. Little experience with GTAW. Worked mostly mild still and some alloy. Little aluminum experience.

Ability to perform field inspections, risk assessment, review, prepare procedure and hand.Self-development in administration and management skillsle permit to work system.Ability to improved performance, utilizes effective follow up actions to solve employee or work related problems.

I have 25 years experience in the Instrumentation field as Instrumentation supervisor, Instrument QA-QC Inspector and Instrumentation technician. Present I am working for (YANSAB) Yanbu National Petrochemical Company a SABIC affiliate (Kingdom of Saudi Arabia.).

CSWIP 3.2,BGas Grade 2,ASNT Level 3 in RT,MT Level 2 in RT,PT,MT,UT

Journeyman Industrial Electrician , Apprentice Instrumentation Mechanic / PLC , DCS, HMI, SCADA . Underground / Surface, Oil and Gas, Mining

I am an electrician and electrical contractor. I have been involved in a variety of different projects including a Power Station, Coal Mine, Prision and an Airport.

22 YEARS POWER, PETROL-CHEMICAL, AND REFINERY INDUSTRY

ISO Implementation, Documents, Records, Archival Management, QA Manager, Writing Technical Documents, Auditor

20 years - Electrical Trade Background, 4 years - Reliability planning-scheduling Oil & Gas

Installation, Maintenance, and Repair, Multi Site Cosmetic/Maintenance, Equipment Operators

Fourteen years of consistent and solid work experience in the field of Instrumentation, out of which the past ten years are in the Middle East. Certified in Instrumentation Mechanism by the Government I.T.I. from T.R. Pattinam, Karaikkal, Pondicherry, India during the year 1990-92.

Safety Technician

Rotating & reciprocating equipment technician

Maritime chief engineer with more than 20 years on bord sea-going ships and 7 years as HVAC Technician and Electrician for shore-based companies,searching now a shore based job in accordance with education and experience.

25 years Industrial Construction experience as a Construction Manager, Superintendent, Project Coordinator, Estimator and Maintenance Planner.

Refractory field engineer, 40 years global experience in refractory/furnace construction in a variety of industries inc. aluminium, copper, iron&steel, cement, glass, petrochem, & industrial waste

Structural Steel Detailer, Tekla v15, Pro Steel v17 Auctocad 2008

I have 7 years experience of electrical installation onshore and offshore Oil / Gas Industry complemented with a 4-year recognized apprenticeship.

Professional Land Surveyor

International Operations- Foreman, Diamond Driller, RC Driller, Long Hole Driller, Blaster etc.

Twenty years experience in global recruitment of oil & gas people: including manpower planning for companies such as AkerKvaerner, ConocoPhillips, Exxon, KBR, Fluor, Shell, Technip and Woodside for oil & gas projects in Australia, Brunei, Indonesia, Malaysia, Singapore and Korea.

Multi-skilled engineer

E&I Construction Supt.,Inspector, Commissioning Eng. 30 years plus experience, in various industries, at various supervisory levels.

Instrument Engineer and technician with 27 years experience in design, installation, commissioning, start-up, operations and maintenance of oil and gas facilities worldwide.

Sales, Engineering Project Manager

15 years experience in erection commissioning and maintenace of field instrumentation , DCS, PLC, SCADA ,VFD, LT PANELS , in petrochemical, steel, pharma,copper plants

Project Manager, Field Engineer, Commissioning Electrical Switchgear

Free! Varied and broad experience in construction, on/offshore projects, mechanical & piping, shipping, logistics, materials and QA-QC all mainly in the oil & gas industry for over 35 years. Countries worked: Eq/Guinea-Nigeria-Egypt-Ivory Coast-India-China-Canada-Spain-Holland-UAE-Oman-Qatar-Malaysia-Indo

Have been a rigger/ironworker for 10 years+. Have experience in welding and have done this on/off for 8 years.

Total eleven years of experience in Refineries/Petrochemicals, Chemical & Oil Port Terminal, Offshore Platform projects etc. Presently working with Foster Wheeler, Singapore and Previously worked for prestigious organizations like, Technip-France, Snamprogetti SpA-Italy, Indian Oiltanking, Indo Gulf

Qualified, results-producing Emergency Management Professional with experience steering and directing all aspects of operations, administration, budgeting, and equipment maintenance. Successful in managing multiple projects with compelling priorities involving program development.

Over 20 Years Industrial, I&E Commissioning Field Service Engineer /Electrical Start-up Engineer

I have worked as a chef in extreme conditions in the past. nothing i can't handle big or small jobs.

My qualifications are reinforced by over 20 years as a front line supervisor in the construction, rejuvenation, revamp of Oil and Gas, Petrochemical and Nuclear Power Plant Projects specifically in the field of Insulation Works.

Eight years of experience in the field of Mechanical Engineering Works that primarily concerns on overall mechanical system and details design as well as fabrication.

Pipefitter with supervisory and training facilitator experience

Project Manager - Sales - Technical

Mining Engineer with 20+ years experience, Supervisor of Drilling Crews, great work ethic, will meet deadlines and bottom line, effective team builder

INSPECTION and SUPERVISION (Welding / Piping / NDT / QA/QC / Mechanical / Materials / Coating and Painting).CSWIP 3.2,ASNT Level 3,NACE Coating Inspector,ISO Auditor

Instrument and Electrical Superintendent with over 30 years of experience in the construction field

I have 13 years of experience in,mining and oceanography,i have worked in an institition where i held leading posts and have been able to achieve all the set cooperative startegies in the shortest time as possible

Instrument Engineering, Fire & Gas Engineering

Extensive skills in composites, operations management, plant management, as well as manufacturing of high speed offshore vessels.

I have over 20 years in the underground profession and I am looking for some company that can utilize my experience.

Twenty-six years experience in most aspects of oil and natural gas production, processing, and transportation.

1 2 3 4 5 6 7 8 9 [ 10 ] 11 12 13 14 15 16 17 18 19 20 21 22

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out