Resume - I am certified welder and can perform different welding procedures such as 5G, 6...

Misco Jobs

Resume #88498

CONTACT INFORMATION:
View contact information...

Personal Background:

Date of Birth: June 15, 1981
Place of Birth: Irosin, Sorsogon Philippines
Nationality: Filipino
Status: Married
Gender: Male

Summary

Having more than eight (8) years of experience in welding of Pipe, pressure vessels, steam drums, plate, chassis, platforms and other structural work both local and abroad.

Work Experiences:

October 2008 - April 2009
ASME CODED WELDER
KNM Special Process Equipment (Melaka) Co. Ltd.
Bukit Rambai, Melaka, Malaysia
„« Perform welding worked of various qualified position, process of SMAW and SAW
„« Full welding of Pressure Vessels, Steam Drum and Columns for the PTTPE ETHANE CRACKER PROJECT for 1000KMNT ETHYLANE PLANT, MAP TA PHUT, Thailand.
„« Follow Welding Procedure Specification (WPS) C0705a to the high standard necessary to pass radiographic test inspection.

February 2008 - October 2008
ASME CODED WELDER
KNM Special Process Equipment (Changshu) Co. Ltd.
Xianghua Gangqu, Changshu City 215513, Jiangsu Province, China
„« Perform welding worked of various qualified position, process of SMAW and SAW
„« Full welding of Pressure Vessels, Steam Drum and Columns for the PTTPE ETHANE CRACKER PROJECT for 1000KMNT ETHYLANE PLANT, MAP TA PHUT, Thailand under TOYO Engineering Corporation.
„« Follow Welding Procedure Specification (WPS) C0705a to the high standard necessary to pass radiographic test inspection.

December 28, 2005 - December 29, 2007
Pipe Welder - (2 Dia-up; uphill or downhill progression)
M.AI - Barghash Trading and Contracting Co.
ARAMCO Construction
„« Full welding of pipe joints with a diameter ranger from 2¡¨, 6¡¨. 10¡¨ and 34¡¨ seamless pipe of different type of metal such as carbon steel, low temperature C.S., Stainless steel, chrome and others, the welding process is SMAW with 100% radiography based on correct W.P.S.
„« Welder of trunk lines, test lines and flow line piping.
„« Installation & repair.

May 28, 2005 - Aug. 28,2005
ARC Welder
Equipment Engineer Incorporated (EEI)
210 MW Coal Fired Power Plant Project
Misamis Oriental, Mindanao, Philippines
„« Working in general construction such as heavy beam plate, pipe support, stiffeners, angle bars, carbon steel pipe, I-beam.
„« Welding of Steam Lines chilled water linem from minimum 8¡¨ to 20¡¨ diameter with a thickness of schedule 40 with 100% radiography.

January 22, 2005 - April 22, 2005
ARC Welder
UKC Construction
Tablon, Cagayan De Oro City Phil.
„« Working in general construction such as heavy beam plate, pipe support, stiffeners, angle bars, carbon steel pipe, I-beam.
„« Welding of Steam Lines chilled water linem from minimum 8¡¨ to 20¡¨ diameter with a thickness of schedule 40 with 100% radiography.
„« Welding of platforms and other structural works.

June 31, 2004 - December 28, 2004
Pipe Welder
Geo Transport Water District
Cagayan De Oro City Phils.
„« Assign in piping fabrication shop on production welding. Full welding all heavy wall pipe carbon steel and stainless steel, wherein 100% radiographic test, ultrasonic test and penetrant test.
„« Welding of water Pipe lines.

March 22, 2004 - June 22, 2004
Pipe Welder
Enertech Contractor Co.
Marilao, Bulacan Philippines
„« Welding and fabrication of Steam Boiler.
„« Full welding of box column, I-beam trusses diaphgram, I-beam and carbon steel pipe.
„« Full welding of carbon steel and stainless steel pipe joints with 100% radiographic test, at chemical plant, ammonium netric plant.

September 30,2003 - December 30, 2003
Structural / Plate Welder
People's Asia Contractor Co.
Valenzuela, Marilao Bulacan Philippines
„« Welding of pipes and other structural works.
„« Assist on the fitting/ erection and welding of structural components in the project.

May 05, 2000 - June 10, 2003
Plate Welder
JMCC Construction Corp.
Marilao, Bulacan Philippines
„« Working in General construction as a Welder (Project)

September 24,1999 - April 24,2000
Plate Welder
Penomelyn Contractor Co.
Marilao, Bulacan Philippines
„« Welding and construction of vehicle under chassis and etc.

March 01,1998 - August 31,1999
Plate Welder
Ramcar
Marilao, Bulacan Philippines
„« Welding and construction of vehicle under chassis and etc.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 401 to 450 of 1081)

Go to Search Parameters...

Brief Description

Heavy equipment operator

Registered Electrician with 20 years expirience trained in gas and electric arc welding, Basic First Aid, Lathe operation, Certificate in Computer Technology and two yearly Cardio Pulmonary Resusation and Saftey training for Electrical licence

Diploma or ITI holder who have worked in the maintenance, repairs of Cranes, Tower Cranes

Heavy duty auto eletrician, 18 years expat Caterpillar dealership experience,work includes pipelines and mines.

Caterpiller Trained Heavy Diesel Fitter with open cut and underground Experiance on Caterpiller, Tamrock, Leiberherr equipment

Millwright, Mine /Concentrator, Construction,Auto sector, Electrical,PLC experience

I am certified by MACS in air conditioning. I have worked on heavy equiptment for three years at Patten Industries. I worked a couple of months at the Mossville Caterpillar plant as a experimental technician. I completed a two year caterpillar base technical program at Illinois Central College.

17+ years contruction electrician foreman, electrical engineering and PLC experience. The majority of which was obtained on high profile DOE contracts; DOE Q cleared; BSEE

Construction/Maintenance Superintndent, Mechanical/Civil fields

Desalination Plant Maintenance/Inspection, Materials Testing, Technical Evaluation,Troubleshooting, Supervisory/Managerial Skills

I am certified welder and can perform different welding procedures such as 5G, 6G SMAW.and SAW. I have more than 8 years working experience in various manufacturing and Oil and GAs companies in different country such as Saudi Arabia, China and Malaysia. My current job was in KNM Special Process Equi

CSWIP Senior Welding Inspector

Heavy Lift Manager

worked in the Middle east on Power plants for 2 and a half years, stat generator sets

Skilled Senior LEVEL II RT Technician with 30 Yrs experience

Associate Mechanical Engineer, Plumbing Design, Applications, Process, AutoCAD

Millwright, Pipefitter, Construction: I'm expressing my interest in a position with your company. Based on my skills, I am confident that I would be a great addition to your team.

ecavation demolision heavy equipment operator forman

Project Manager or Owner Representative. Over 25 years of experience in Industrial Instrumentation and Controls (I&C) engineering, construction, commissioning, start-up, operations, maintenance and training in a variety of industries. Project Management Professional (PMP) Certification #1200696.

Heavy Duty Mechanic

Electrician, Air Conditioning & Refrigeration Mechanic with Industrial, Commercial and Residencial Experience, Currently working for an Industrial Switchgear and Automation specialist in the Electrical Industry as a sales engineer.

Condition Monitoring Technician - Vibration Analyst Cat III (ISO 18436.2 2008) 15 years experience. CSI and Bently VA products, Fixture and Pruftechnic Alignment experience, Flir Infra red camera experience. Mechanical Commissioning Supervisor - Nickel project 10 months)

Energetic and versatile Quantity Surveyor (QS) with proven expertise, working with an International Airport Construction Company.

More than 30 years experience in the field of General Engineering, Plant Maintenance Management, Project Management, Telecommunications, Electrical/Instrumentation and Process Control.

BS Mech/Indust Eng. Trade qualified: Marine Eng & HD Mech. Member: "Intl Assoc Airport Executives (Can.)" & "Inst of Transportation Eng (Can.)" Extensive o/seas experience as project engineer in frontier/conflict regions.

Blueprint reading ,Hydraulics,Sheet metal layout, fabrication,Mig, Arc, Gas Welding,3-phase electric motors, Underground explosives

Water & Wastewater Specialist searching for a challenging position overseas.

34 years in instrumentation industry.

Class 1 Drivers License, High School Diploma, Fortlift, Variable Reach( Zoom Boom),Confined Space Entry,Ground Disturbance Advanced, Standard First Aid- Level A CPR, H2S ALIVE, OSSA, CSTS, Q Endorsment( Air Brakes),TDG, WHIMS, Opeator, Oil and Gas, Construction.

Heavy equipment operator,heavy mechanic,pre-employment floorhand(roughneck) training

Professional Contract Chef / EMR Available

Certified Instructor and Operator of all types of heavy equipment

Free! I have 28 years of production and reorganizing operations to maximize their production and maintenance.

Quantity Surveyor

I inspect equiptment for faults & malfunctions, determine repairs required, do the repairs required and test them.

Experienced Mining and Construction Supervisor, heavy equipment operator, driller, blaster, grade staker.

Looking for Autocad Draughtsman civil with a growing company that would enable my profrssional development.

I am currently working in an Offshore Vessel as an Electrician. I've worked experienced in Petro-Chemical Plant in Saudi & CHEVRON, Angola Africa as Maintenance Electrician. I am a Registered Master Electrician with PRC Licensed no. 0023265. I am currently looking for a job.

WORKSHOP MANAGER/SUPERVISOR /TRAINER VEHICLES+ PLANT EQUIPMENT

Very experienced Welder, Pipe fitter, Foreman

Construction Engineer/Construction Specialist/Electrical Specialist/Construction Manager

A multidiscipline Engineer with over fourteen years experience within the petrochemical, Oil and Gas industry. I have extensive hands on experience on a variety of machinery and have managed multi ethnic; multi disciplined teams on a variety of jobs. I can work to strict timescales and budgetary con

Attached please find my CV as application for the above or another suitable position.

I have over 16 years experience in Health, Safety, and Environmental (HSE) and have 4 years experience working overseas with employees from various cultures.

22 years heavy equipment operator

I can work as a carpenter, mason, cleaner (territories and premises), car driver and assist in other jobs.

Besic Welding Diploma HOlds 2 position stick SMAW and 1 position flux core tickets from Canadian Welding Bureau Certification....WHMIS, Fall Protection, confined space entry, hoisting and Rigging , forklift ticket, occupational health and safety, hydrogen sulfide (h2s) , CPR,

I am an advanced Scaffolder (CISRS), Advanced Scaffold Inspection, Risk Assessment Trained, and am Computer Literate. I have an extensive understanding of scaffolding and design, the importance of health and safety and the best ways to achieve the goal of supplying clients with a cost effective and

Construction Management/Estimating/Supt/PM

Experience in pipeline, Power Plat Installation

1 2 3 4 5 6 7 8 [ 9 ] 10 11 12 13 14 15 16 17 18 19 20 21 22

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out