Resume - B.Sc.1977, V.G. Honours, M.Sc.1985. Consultant and Executive Director (> 40 Tran...

Misco Jobs

Resume #24350

CONTACT INFORMATION:
View contact information...

EDUCATIONAL RECORD:
* B.Sc., (July 1977), Faculty of Engineering, Cairo University, Giza, Egypt.
Major: Civil Engineering.
Degree of Appreciation: Very Good (Honours).

* M.Sc., (January 1985), Faculty of Engineering, Cairo University, Giza, Egypt.
Major: Civil Engineering.
Thesis Title: Effects of Changing Legal Axle Load Limits of Commercial Vehicles in Egypt.

* Register for Ph.D.

SCHOLARSHIPS AND PRIZES:
1- Prizes for Excellency from the Egyptian Ministry of Higher Education (for successive 5-undergraduate years 1972-1977).

2- A 10-months Scholarship (from January 5th, 1988 to November 5th, 1988) from the Technical University of Delft (Technische Universiteit Delft), Delft, The Netherlands.
During this period, 3 reports were prepared. They are:
1- Public Transport in Greater Cairo: Description of the System, the Problems and Recommendations.
2- Passenger Pubic Transport in the Netherlands.
3- NS (Nederlandse Spoorwegen), or Netherlands Railways.

TEACHING EXPERIENCE:
1977-1985 Demonstrator, Public Works Department, Faculty of Engineering, Cairo University.
Duties include:
Teaching undergraduate session in "Surveying" (October 1977 - July 1978), "Transport Planning", "Railway Engineering" and "Applied Statistics and Engineering Systems" (October 1978- March. 1985).

March. 1985 Assistant Lecturer, Public Works Department, Faculty of Engineering,
Till Cairo University.
January 1993 Duties include:
Teaching undergraduate sessions in "Transport Planning", "Railway Engineering" and "Applied Statistics & Engineering Systems".

2003 Public Works Department, Faculty of Engineering,
Cairo University.
Duties include:
Teaching undergraduate sessions in, "Railway Engineering".

RESEARCH ACTIVITIES:
1978-1981 Research assistant in: "Cairo Urban Transport Project", Cairo University/ Massachusetts Institute of Technology (CU/MIT), Technology Planning Program.

1978-1981 Research assistant in "Intercity Multimodal Transportation Project", CU/MIT, Technology Planning Program.

1986 Research assistant in "Updating and Application of Egypt Intercity Transportation Model", Development Research and Technological Planning Center (DRTPC).

1985-1986 Research assistant in the study "Bus Routes in Greater Cairo", for Cairo Governorate. The study is funded from the World Bank.

1986 Research assistant in the study "Replanning of Terminals of Different Transport Modes in Greater Cairo", for the Ministry of Transport.

1985-87 Research assistant in the Study "Freight Service Planning and Marketing, A Case Study of the Egyptian Railway". The study is a part of the Technology Adaptation Program between Cairo University and Massachusetts Institute of Technology (MIT) in U.S.A.

1990 Research assistant in the Study "Economic study of Tersa Street in Guiza Governorate. The project is funded from the World Bank.

1990-91 Research assistant in the Study of the Construction of Railway Line between Libya and Egypt with length of 181 kms. The project is funded from the Governorate Libyan.

1991 Research assistant in the Study "Realignment of the Railway Line Quena - Naga Hammady in Upper Egypt with length of 20 km". The project is funded by the Egyptian Ministry of Industry.

1993-1994 Research assistant of the Study of the Construction of Railway Line between Quena and Abo-Tartour at Kharga Oases with length of 150 kms in Egypt. The project is funded from the Egyptian Ministry of Industry.

1994-1995 Research assistant in the Study "Protection of Quena - Abo Tartour Railway line at Kharga Oases with Length of 150 kms Against Sand Dunes and Sand Drifts". The project is funded from the Ministry of Industry.

1996-1997 Research assistant in "The study of the Construction of Alexandria Metro in Egypt". The Project is a joint venture between French Company (SOFRETU/ SOFRERAIL) and Arab Consultants (Moharam - Bakhoum) in Egypt. The project is funded from the Egyptian Ministry of Transport.

1995-2000 Member of the Consultant Group for the Study ofTthe Construction of Railway Line between Ismailia and Rafah in Sinai in Egypt, with length of 230 kms. The project is funded from the Egyptian Ministry of Transport.

2000-2001 Executive Director for the study of "Development of Container Transport to Support The Foreign Trade of EGYPT". The study is funded from the Egyptian Ministry of Transport, Transport Planning Authority (TPA). The study is a joint venture between Civil Engineering Studies and Researches Center, Faculty of Engineering, Cairo University in Association with Transport Planning & Engineering Consultants (El-HAWARY & Associates).

2001-2002 Executive Director for the study of "Transportation Economics Under The New Variables and Policies". The study is funded from the Egyptian Ministry of Transport, Transport Planning Authority (TPA). The study is a joint venture between Civil Engineering Studies and Researches Center, Faculty of Engineering, Cairo University in Association with Transport Planning & Engineering Consultants (El-HAWARY & Associates) and the Research Center of Sadat Academy for Management.

2002 Executive Director for the Study of "The Development of Safety on Railroad Grade Crossings in Arab Republic of EGYPT". The study is funded from the Egyptian Ministry of Transport, Transport Planning Authority (TPA). The study is going by Civil Engineering Studies and Researches Center, Faculty of Engineering, Cairo University.

2003 Executive Director for the Study of "Helping Tools for Developing the Railroad Grade Crossings of Egyptian National Railways". The study is funded from the Egyptian Ministry of Transport, Transport Planning Authority (TPA). The study is going by Civil Engineering Studies and Researches Center, Faculty of Engineering, Cairo University.

2004 Member of the Consultant Croup for the study of "Building a National Institution to Organize Inland Transport in Egypt", The study is funded from the Egyptian Ministry of Transport, Transport Planning Authority (TPA). The study is going by Civil Engineering Studies and Researches Center, Faculty of Engineering, Cairo University.

2003-2005 Member of the Consultant Group for the study of "Constructing Railway lines inside the East of Port Said Harbor". The project is funded from the Ministry of Transport. The study is going by Civil Engineering Studies and Researches Center, Faculty of Engineering, Cairo University.

2005 Member of the Consultant Croup for the study of "The Development of Safety on Railroad Grade Crossings of ENR, The First Priority, Phase I", The study is funded from the Egyptian Ministry of Transport, Egyptian National Railways (ENR). The study is going by Civil Engineering Studies and Researches Center, Faculty of Engineering, Cairo University.

CONSULTING ACTIVITIES:
Since 1977 participated as an assistant engineer (till 1985) then as an transport and traffic engineer in the following consulting projects. Major Participation included:
- Supervision and undertaking of Transport and Traffic Field Surveys,
- Planning, Design and Preparation of Working Drawings of Railways, Highways and Bridge Projects,
- Undertaking Inventory of Highways,
- Analysis of Travel Demand Data, and
- Feasibility studies.

* Projects for Arab Consulting Engineers (Moharam- Bakhoum):
- "Luxor & Abu Simbel Tourism Project",
- "Cairo Airport Terminal II",
- "Feasibility study of Baliana Bridge",
- "Dokki Flyover & Dokki Intersection",
- "6th October Bridge & Galaa Elevated Road",
- "Abu El Elaa Bridge & Zamalek Elevated Road",
- "Rod El Farg Bridge",
- "Area Upgrading Project at Rod El Farg and Abdine".

* Projects for Engineering Consultation Office (ECO) and for PACER Consultants:
- "Structure Plan for The North West Coast of Egypt",
- "El-Max Development Project".

* Projects for Arab Office for Engineering Consultation and Design:
- "Badr New City".

* Projects for El-Tony Consulting Office:
- "Shebin El-Kom Development Plan".

* Projects for other consulting offices:
- "Cairo Metro Coordination Study", Development Research and Technological Planning Center (DRTPC), Cairo University for Transport Planning Authority (TPA).

COMPUTER EXPERIENCE:
1- The following 6 Courses has been attended with grade Excellent:
1 - FORTRAN.
2 - Practical Training FORTRAN.
3 - Numerical Analysis.
4 - System Analysis.
5 - Interactive On-Line Computer.
6 - BASIC Programming.

2- Extensive knowledge and experience with IBM PC software such as:
a. Operation software: DOS and Windows b. Drawing software: AutoCad c. Statistical Analysis software: STATGRAPH, SPSS & Statistica.
d. Data Base software.
e. Spreadsheet software: EXCEL
f. Word Processing software: WordPerfect MS-Word g. Some other software such as HG3 and PCTOOLS

3- Extensive knowledge and experience with Apple Macintosh software especially desktop publishing software.

OTHER ACTIVITIES:
1985 - Jan 1986 Participated in the organization of the 3rd Conference on Urban Transport Planning in Developing Countries (CODATU-III) that was held in Cairo University, January 1986.
* Member of the Egyptian Syndicate of Engineers (ESE) since 1977.
* Member of the Egyptian Society of Civil Engineers (ESCE) since 1985.
* Secretary of the Egyptian Environmental Engineering Society (EEES) since 1999.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1 to 50 of 768)

Go to Search Parameters...

Brief Description

Free! Experienced Safety engineer, CSP. Bilingual Spanish/English. Authorized to work in the European Community.

Free! 15+ years experience HSE oilfield operations. Experience includes seismic, drilling, completions, construction with extensive exposure to heli-portable. Experience in North Africa, all areas of Canada including Artic. Client rep for large oil/gas producers.

Free! Experience and Qualifications in the following fields : Ops./Elect./Instr./Mech./Crane./Scada/Projects/F&G./Power/Compression/Safety(Nebosh ongoing)/Methode-Safety/ISO14001/9001Cert./Ops.manuals/Environmental/Shutdown/Logistics/Buyer/Revamping/NORM/SIMOPS/Hook-ups/flowline’s

• As a professional journalist for over 20 years, worked for and with on-line, as well as hard copy publications as a writer/ Photographer.

Join a professional organization dedicated to client service and professional advancement. To share my 19-plus years of experience with other for the benefit of the organization. To offer what talents I have for the use of younger professionals so they may gain not only by my knowledge.

Expertise: land acquisition,joint venture/sale negotiations, contract negotiations

Accomplished Art Director/Sign Designer/ Structural Sign Designer with over 18 years experience working closely with creative teams in the concept through production of commercial signs.

Safety Manager with strong safety skills. OSHA 500 certified.

Marine Dredging Engineer

Over 18 years in the government service as Fire Safety/Fireman/Arson Investigator in the Philippines

I am a mechanical engineer holding a diploma specialised in ship construction and naval architect later converted to a safety personnel i have experience in high rise building, quay rivertment construction and with in airport building apron services construction works

B.Sc.1977, V.G. Honours, M.Sc.1985. Consultant and Executive Director (> 40 Transport & Railway projects). Teach Transport Planning, Railway Eng. & Applied Statistics & Eng. Systems for undergraduate, Faculty of Eng., Cairo Uni. DOS, Win., AutoCad, MSOffice. Organizing the 3rd CODATU-III Conference

Electrical Supervisor

An HSE professional that has made significant input over the last ten years to the development of Occupational Health, Safety and Environment (HSE) as it affects the oil and gas industry. I am self motivated, result driven and possess strong business acumen with ability to motivate and drive

well versed warehouse man

Master in Business Administration (MBA) with experience of around 13 years proven accomplishments in the areas of Accounts, Purchase, procurements and sales.

My experience in the Piping and Mechanical fields is both diverse and extensive. I have stayed in the Heavy Industrial sector all of my working life.

Award Winning and Experienced Dispatcher/Customer Relations/Service Coordinator

i am a experienced welder worked in alot of industry such as pressure vessels manufacturing,windtowers ,structural ship building

Materials, Warehouse, Asset, Logistics Management

Hard dollar Mechanical Estimator/Project Manager experienced with Estimation and Quick Pen seeks West Coast Position.

BS Business Administration Major in Accounting graduate and presently a Materials Management Manager

SHE Official

20 years exp. in construction in singapore

Results-oriented Mechanical Engineer with strong analytical and effective interpersonal skills. Corporate site and office experience in all facets of Engineering at design/build, manufacturing, consulting and telecommunications companies in Canada, USA and Europe.

WORKING AS A SAFETY OFFICER IN A COMPANY IN QATAR

Qualification master degree(statistics)=profession=cost controller in construction

Over 25 years experience in the Supply and Logistics fields, with several overseas tours, both with the military and the civilian sector.

I have total 10 years of Work experience 5 years in middle east as a procurment officer. I have material knowledge, good negotatiton skills, Good commounication skill. Analytical and commonsense approach to given task, skilled in planning, Co-operation and directing,Self motivated and productive

Having good knowledge in Construction field, having 11 years experience in safety filed. Having B.Sc degree. Good knowledge about scaffolding, equipments. audits. inspections.

Resouceful, Independent Thinking Team Player has legal, business and financial expertise

Designer / Draftsman

Construction Manager seeks position in Caribbean. Experienced in capital project management and construction management.

I am skilled in operating many heavy equipment such as Excavator, Wheel Loader, Backhoe Loader, Bulldozer, Vibrator Sheet Pile Excavator, Long Arm Excavator, Back Pusher Tractor, Compactor,Hydraulic Breaker Hammer Excavator,Hydraulic Breaker Hammer Backhoe Loader.

I've work in construction most of my life ,I like doing it and I'm very good with grade work.

Architect urban designer with aptitude for designing and detailing large scale building complexes and buildings

Was employed in the capacity of safety and health officer in various project in Malaysia as well as India. With nearly over 15 years of experience in the construction industries

welding inspector structural,piping and coating inspector

A well versed user of AutoCADD 2208; Revit Architecture / Structural / MEP; Solid Works; 12d; Autodesk Viz

Demonstrated ability to build on a technical trade qualification applied in a teaching environment with strong skills in coaching, motivation and communication. I am now looking to combine my technical trade skills and strong inter-personal skills with opportunities in the resources sector.

3DS Max, Photoshop, CorelDraw, AutoCad, PageMaker

mapping

Architect & Town Planner from India with 5 yrs experience.

A strong technical background is complemented by practical financial, managerial, commercial, and communications experience developed in worldwide assignments.

ARC HITECT PLANNER (5 YEARS EXP )

Aerospace / Aeronautical Engineer with Post Graduation on Aerospace with 6 to 7 years of Experience

Electrical engg. graduate from prestigious institute of India with 36 YEARS of experience ( includes 5 Years of Overseas) in EPC power projects, EHV/HV transmission Lines, and distribution, sale of energy, coordination, liasing.

I am skilled in all types of welding.

Dear Madam / Sir,

Well Experienced Human Resources Professional in Recruitment, Salary Administration, Writing of Job Writing, Employee Relation, Employee Record Administration, Leave Record, and Settlement

[ 1 ] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Seach Parameters


Change search parameters...
CATEGORIES: Other; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out