Resume - Trained in handling Emerson Process Management (formerly Fisher-Rosemount System...

Misco Jobs

Resume #27752

CONTACT INFORMATION:
View contact information...

JOB DESCRIPTION AND DUTIES
* Trained in handling Emerson Process Management (formerly Fisher-Rosemount Systems) DeltaV Digital Control Systems (DCS) with Foundation Fieldbus field instruments at Emerson Process Management main Headquarters in Austin, Texas U.S.A. and Asia Pacific main Headquarters in Pandan Crescent, Singapore.
* Responsible for Installation, Startup, Testing, Commissioning & Maintenance of DCS including various process instrument field devices such as Temperature, Pressure, Flow, Level Transmitters, Analyzers and Control Valves.
* Responsible for Software Engineering & Configuration of DeltaV Digital Control Systems:
-Programming & Engineering of Process Control Logics using IEC 61131 Function Blocks Diagrams, Phase Logic Diagrams, Sequential Function Charts (SFC) & Structured Text.
-HMI/Operator Interface Display Build-Up & Modification using DeltaV's
Intellution Graphic i-Fix32.
-Commissioning and Calibration of Smart 4-20 mA / HART and Certified Foundation Fieldbus Devices Field Instrumentation Systems.
-System Integration of Real-Time process information using OPC (OLE for Process Control) and MODBUS Protocol from DeltaV DCS and non-DeltaV DCS.
-OSI PI and Sytech Report Generation Software based on customer's functional specification and project documentations.
- Configuration & Testing of DeltaV DCS Remote Workstations.
* In charge in conducting DCS Software Systems Factory Acceptance Test (FAT).
- Control Narratives
- Functional logics
- System Integration Test with other System Vendors.
* In charge in conducting DCS Hardware Systems Factory Acceptance Test (FAT).
- Cabinets Inspection
- Controllers & Power Supplies redundant test
- IO Cards channel testing
- Controller & IO Carriers inspection
- Wirings & Termination Inspection
- Network Interconnection & Testing
* Provide training, guidance and direction to Plant Operation Engineers & Instrument Technicians on the best utilization of DCS and proper installation / commissioning of Foundation Fieldbus Devices.
* Microsoft Operating System Installation (Windows NT 4.0 / Windows XP Professional, Windows Server 2003).
* Digital Control System Software installation and configuration setup.
* Onsite System Installation, Power-up, and Facility Coordination.
* In charge in preparation of project documentations and site software support.
* Provide Technical Support via Email, Fax, and Phone including Remote Connection to completed & turnover projects.

MAJOR PROJECT EXPERIENCES:

Oil & Gas Industry

SHELL PHILIPPINES EXPLORATION B.V. February 2000 – December 2003
The Malampaya Deep Water Gas to Power Project Palawan, Philippines

Designated as Process Automation Systems (PAS) Engineer on this newly installed Offshore Natural Gas Production Platform in the Philippines. Also part of the Malampaya Integrated Commissioning Team, which started in Singapore up to startup, commissioning & successful continuous Natural Gas production in Palawan. After post-project, I am still part of Secondary Health Care or Maintenance of the Malampaya Platform Digital Control & Instrumentation Systems.

The Malampaya Platform utilized the DeltaV Digital Control Systems (DCS) w/c has Intrinsically Safe System, Foundation Fieldbus Technology, OPC (OLE for Process Control), and Satellite communications which spanned communications over Ethernet. Integrated with the DeltaV DCS were Yokogawa Emergency Shutdown Systems (ESD), Fire and Gas Safety Systems, Cooper Rolls Entronics Export Gas Compression System, Cooper Cameron Sub Sea Integration, SKF Vibration Monitoring, Polar Condensate Metering System & Cadence Advanced Process Control. Each of these vendors integrates using OPC. While Allen Bradley & GE PLC of Solar Turbine were integrated on DeltaV DCS using the MODBUS Protocol.

Duties and Responsibilities

* As a PAS Engineer, I am responsible for PAS Control Logic Engineering / Programming, HMI/Operator Interface Graphics Display Build-Up, OPC Mapping & PI Report Generation based on customer's functional specification and project documentations.
* Commission and Calibrate Foundation Fieldbus Field Devices namely Fisher Fieldvue DVC5000F Digital Valve Controller, Rosemount 3051 Pressure Transmitter, 3244 Multi Variable Temperature Transmitter, 8800 Vortex Flow Transmitter, Micromotion 2000 Coriolis Mass Flow Transmitter, Rosemount Analytical OXT5000 Oxygen Analyzer and Rotork FF Motorized Valve.
* Responsible for conducting Factory Acceptance Test (FAT) on Software System Setup such as
Customers Control narratives, Functional logics and System Integration Test with other Vendors in our principal main headquarters in Emerson Process Management, Austin Texas, U.S.A.
* Responsible for conducting Factory Acceptance Testing (FAT) on Hardware System Setup such as Rittal Cabinets, DeltaV Redundant Controllers, Redundant Power Supplies, IO & Fieldbus Cards, in our principal distributor Headquarters in Puffer-Sweiven, Houston Texas, U.S.A.
* Provide training, guidance and direction to SPEX Plant Operation Engineers & Fluor-Amec Instrument Technicians on the best utilization of DCS and proper installation / commissioning of Foundation Fieldbus Technology as integrated to the DeltaV DCS.

Power & Energy Industry

UNOCAL-PHILIPPINE GEOTHERMAL INC. (PGI) January 2000 - February 2000
Bar-08 Permanent Corrosion Mitigation Setup Project Tiwi Albay, Philippines

In this project I am the Lead DCS Engineer. The DeltaV Digital Control System consisting of 20 points 9 of these were Foundation Fieldbus Transmitters and one Remote workstation for monitoring remote processes.

Duties and Responsibilities

* In this project, I am in charge of DCS Hardware/Software configuration, installation setup that also includes commissioning and calibration of Rosemount 3051 Foundation Fieldbus Pressure Transmitters.

* Control Logic design, programming of Pumps, Motorized Valves & Flow integration, Graphics Display Build-Up, & Operator Interface.

* Full responsibility of DCS customer site Installation, System Power-up, Testing & Commissioning and Facility Site Coordination.

PETROCHEMICAL INDUSTRY

BASF PHILIPPINES, INC. February 1999 - January 2000
Acrylic Dispersion Plant Project Laguna Ind'l Park, Philippines

In this project I am the only lead DCS Engineer. The DeltaV Digital Control System consisting of more than 400 points and integrated with HIMA Emergency Shutdown System (ESD) through RS232C Serial Interface using the MODBUS Protocol for communication. The processes were mainly batch sequence producing different types of Chemical Product.

Duties and Responsibilities

* Responsible for DCS Hardware and Software configuration and installation setup.

* Responsible for Control Logic Engineering / Programming, Graphics Configuration, Operator Interface, & Report Generation based on customer's functional specification and project documentations.

* Responsible for conducting Factory Acceptance Test (FAT) on Hardware and Software System Setup together with the customers in our Asia Pacific main headquarters at Fisher-Rosemount Systems, Singapore.

* Full responsibility of DCS customer site Installation, Site Acceptance Test (SAT), System Startup, Testing & Commissioning and Facility Site Coordination in Canlubang Laguna, Philippines.

* Responsible for conducting extensive DCS Training to all Plant Production Operators, Engineers, Supervisors, Managers during and after successful site commissioning at customer premises.

* Responsible for project documentations, site software support, and post project support.

Oil & Gas Industry

SHELL PHILIPPINE PETROLEUM CORP. REFINERY (SPPC) Jan 1999 - Jan 1999
SWAF Project Pililla Rizal, Philippines

Duties and Responsibilities

* In this short-term project I am responsible for upgrading of Saab Tank Radar Electronic Processing Unit (EPU) EPROMS and do online testing.

SHELL PHILIPPINE PETROLEUM CORP. REFINERY (SPPC) Oct 1998 – Dec 1998
Utilities Re-Instrumentation Phase I Project Pililla Rizal, Philippines

Duties and Responsibilities

* In this 2 months project I am responsible of installing MTL Multiplexer Systems for monitoring process temperature and pressure transmitter readings of the refinery equipments. Using third party software we were able to locate each address via MODBUS Protocol and integrated to SPPC's existing Yokogawa DCS.

PREVIOUS WORK EXPERIENCE

POSITION TITLE: TEST ENGINEER

COMPANY: ADTX Systems Inc. (formerly APTI-Philippines Inc.)
5F Citibank Fravelle Bldg. Madrigal Business Park
Alabang-Zapote Road, Muntinlupa City, Philippines 1770

INDUSTRY: Information Technology (Research & Development)

DATE EMPLOYED: January 1997 – August 1997

JOB DESCRIPTION AND DUTIES

* Responsible for high speed laser printers Hardware and Software System
Performance Test under different Networking and Operating Systems Environment.
* Responsible for testing of developed laser printer cards and reloading latest release versions of microcode.
* In charge in the preparation of database reports both printer hardware and software printouts bugs/errors and elaborate the degree of severity encountered to programmers.

POSITION TITLE: SYSTEMS & SERVICE ENGINEER
(Building Automation Systems)

COMPANY: Electro-Systems Industries Corporation
# 399 Enzo Bldg. Sen. Gil Puyat Avenue
Makati City, Philippines

INDUSTRY: Consulting (Engineering & Technical Services)

DATE EMPLOYED: July 1995 – December 1996

JOB DESCRIPTION AND DUTIES

* Responsible for the Design of Hardware and Software Systems of different client's
Building Automation System (BAS).
* Responsible for Building Automation Systems engineering / programming, graphics configuration, HMI Graphics, report generation based on customer's functional specification and project documentations.
* Full responsibility of system site installation, startup, testing & commissioning and onsite facility coordination.
* Provide Technical Support (troubleshooting, repairing, and monthly preventive maintenance) to Hardware & Software of commissioned BAS Projects.
EDUCATIONAL BACKGROUND

University: AMA Computer University
Quezon City, Philippines
Degree: Bachelor of Science in Computer Engineering (BS ComEng)
(1991 to 1995)

LANGUAGES: Filipino and English

SEMINARS & TRAININGS ATTENDED
1. Further Offshore Emergency Training (FOET)
Date: September 15, 2004
Place: IDESS, Subic

2. Personal Survival at Sea
Date: March 07-08, 2001
Place: Loyang, Singapore
Conducted by: ALERT Disaster Control

3. HELICOPTER SAFETY & EGRESS
Date: March 08, 2001
Place: Loyang, Singapore
Conducted by: ALERT Disaster Control

4. BREATING APPARATUS & SELF RESCUE
Date: March 09, 2001
Place: Loyang, Singapore
Conducted by: ALERT Disaster Control

5. FIRE –INITIAL RESPONSE –EXTINGUISHER
Date: March 09, 2001
Place: Loyang, Singapore
Conducted by: ALERT Disaster Control

6. DeltaV Digital Control Systems Version 7.2 Enhancement
(Windows XP Version)

Date: June 26 - 27 2003
Place: Emerson Global Support Center
5th Floor, San Miguel Properties Inc., Bldg.
Mandaluyong City, Philippines
Conducted by: Mr. Quay Finefrock
(DeltaV Engineer, Hawksite)
Emerson Process Management, Austin Texas U.S.A.

7. Administering Microsoft Windows NT Server 4.0

Date: May 02 -04 2001
Place: Edupro Inc., Makati City, Philippines
Conducted by: Mr. Frederick L. Perito
(Microsoft Certified Trainer)

8. DeltaV Digital Control Systems (On-the-Job Training)
a) Project Implementation b) System Network Training c) System Configuration, Integration, and Test Training d) DeltaV Implementation II (Course 7017)
e) Foundation Fieldbus Systems & Devices (Course 7032)

Date: February - August 2000
Place: Fisher-Rosemount Systems Inc.
Austin, Texas USA
Conducted by: The Malampaya Project Development Team
DeltaV Digital Control Systems

9. Rosemount Measurement Technology Training
Fundamentals of Process Control

Date: November 04-06 1998
Place: TMIC, Training Room
Conducted by: Mr. Mohd Rafi
(Process Control Lecturer)

10. Seminar on Supervisory Control System (SCADA) with
Programmable Logic Controllers (PLC)

Date: March 14, 1998
Place: UP ISSI, University of the Philippines Diliman
Quezon City, Philippines
Conducted by: Mr. Marvin Joven
(Resource Lecturer)

11. Fisher - Rosemount System DeltaV Distributed Control Systems
Certification Training Course 7011

Date: January 12 -16 1998
Place: Fisher-Rosemount Systems, Singapore
Conducted by: Mr. Vinud Vasnani
(Senior DeltaV Engineer)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 451 to 500 of 756)

Go to Search Parameters...

Brief Description

A fully qualified GIS specialist with experience in the delivery of major asset management projects. Adaptable to business requirements, with management experience. Well versed in the use of ESRI ArcGIS 9.1, WINGS 2.4.10, AutoCAD 2008, Corel Paint Shop Pro XI. IT literate.

FELONY conviction disclosure! Experienced metrologist, industrial electronics repair, computer/network systems analyst looking to reenter tech industry.

Time served mechanical fitter - city and guilds

Five (5) years of electrical engineering work experience of which engaged in oil, gas, and water construction and rehabilitation. Electrical, Cathodic Protection and Instrumentation design verification and implementation of work procedure. To assure that all electrical activities were done in accord

Experience includes Phase I & II environmental site assessments, environmental impact statement, waste remediation, solid & municipal waste treatment and waste management, groundwater treatment plants O&M, lead and asbestos abatement, noise & vibration control, and building demolition.

Accounts payables, data entry, buyer - willing to learn anything new

Sr. First Aid Instructor, and Safety Practitioner with knowledge and experience in oilwell drlling operation and safety management including H2S

Experinces in welding, mechanical and Rig at an Oil Company, CALTEX. With the latest position as Coordinator. I need a job weets wiith my experiences.

Certified Project Manager: MS Project Proficient 3 Years - Conception and Maintenance; Risks identify, log, track mitigation, etc; Issue resolution/ day to day PM

Principal & Project Engineer experienced working Oil & Gas and Industrial electrical projects.

Oracle Functional Consultant with over 9 years of experience in the Finance domain

Global Business Development Manager

I am skilled in the planning, scheduling and initiating tasks for production, repair, and preventive maintenance. Lean manufacturing skills including inventory of finished goods, spare parts, and raw materials.

During my studies I worked in cooperation with the Egyptain Geological Survey in the Eastern and Western Desert of Egypt and in another project together with the University of El Jadida, Morocco. Main subjects were mapping and sampling as well as geomagnetic. Working experience is shown in my CV.

Auto CAD Operator & 1 Year Working Experience in Auto Plant (specialized software of piping)

! have 23 years in the oil and gas industry with the last 10 in the pipeline control room. Handling 10000 miles of pipeline reciepts and deliveries.

Logistics, Technology, Transport and Management Professional

Worked for Mckenzie Forest Products for 25 years 12 years as a Supervisor

I am an experienced safety officer(Construction) with vast skills in HES documentation

Extensive working experience in Chemical Processing, Power Generation and Oil & Gas Industries. Versatile team player with an ability to incorporate new concepts and interact with all levels of professionals. Expertise in Project, Maintenance, Materials Management and ERP (SAP, MAXIMO, Primavera R3)

Experienced HR / Recruitment Professional

Overhead crane opperater, press cnc machines and forklift training

Environmental Consultant (Engineer/Scientist)/Geoscientist

I am a Survey Engineer, experienced in multi disciplinary projects, with a good track record of world class projects. I am highly interested in any position with international or overseas exposures and possibility to maximize skills in Surveying, Management, acquire new ones and progress.

Microsoft Certified Systems Engineer with over 12 years experience in system and security administration and management.

Professional Objective: To continue working as a Quality Assurance, Construction Representative, Pipeline Welding Inspector, Non Destructive Testing Inspector, Radiographic Interpreter, for a major proactive organization.

IT professional with over 20 years of experience. He holds certifications from a international security standard - CISSP and is awaiting confirmation of his CBCP, MBCI and CCM (Business Continuity)

Talented and accomplished Finance professional with background in Accounting, Business Finance, and Auditing. Proven ability to oversee all corporate financial operations. With previous experience as accountant.

A Production & Purchasing Manager with a wide range of experience in Engineering and Manufacturing industry. Able to work on own initiative and as part of a team. Proven leadership skills involving managing, developing and motivating teams to achieve their objectives.

27 years of mechanical and process engineering

Electrical / mechanical service tech

Experienced electrical contractor, foreman, and electrician, with expertise in machine/process control, motors & controls, power distribution, general wiring. Worldwide experience, including work in Antarctica, Mexico, Iraq, Taiwan, and Mongolia

Excavator Operator

Responsible of Logistic, Warehouse, Purchase for Inter. Infrastructure Works Contractors

15 years of proven experience in business development for technical service providers. Expertise in engineering/consulting, construction, environmental, oil & gas. Managed sales and operations regionally and nationally.

A computer literate with proficience in the use of various product management softwares to monitor and control stock movement. Ability to work without supervision and also to work under pressure. An innovative person who always explores better ways of doing things positively and team player

Camp, facilities, catering Management

I have over eight years experience within the recruitment market both in Australia and within South East Asia. I have acquired a wealth of experience servicing some of Australia’s largest mining, energy and construction organisations and have developed extensive skills in recruitment and HR.

911 Paramedic with 10+ years in emergency medicine to include former Army EFMB medic and USAF medical technician.

Ex Firefighter 18 years, Breathing Apparatus, Confined Spaces, Fully Qualified Pllease view my CV

Master of engineering, Post graduate programme in business school, knowledge of Asian and CIS countries, pro-active attitude, results oriented.

HR Professional seeking Middle / Senior Management Position

International Trade such as Import & Export Business, Offers, Sales Promotion, Market Research, Different Business Reports / Information's, Estimations and Future Business Plans beside some Administrative Work etc

Trained in handling Emerson Process Management (formerly Fisher-Rosemount Systems) DeltaV Digital Control Systems (DCS) with Foundation Fieldbus field instruments at Emerson Process Management main Headquarters in Austin, Texas U.S.A. and Asia Pacific main Headquarters in Pandan Crescent, Singapore.

More than two years of experience in inspection works as a QA/QC Welding Inspector. Extensive experience gained in major onshore/offshore oil and gas construction projects, covering all methods of structural and piping fabrication, erection and inspection (Modules, CPP Decks/Topsides, Jacket & LQ).

young and energetic graduate with professional experience in Land Surveying

A geophysical graduate with 8 years marine survey experience, coupled to business, project and people management skills. Currently working for an international consultancy, integrating geophysical and geotechnical surveys into engineering projects worldwide.

Corporate Finance, Program Management, Management Consulting, Audit, Accounting, Business advisory services

Projects Management / Technology Consultant / Business Development & Management of Information Systems

Having Cement and Pharma R&D Experiences, I would like aquire a career in the same feild. My Skills includes that,I can work with part of team or indepentantelly. Fast decision making, analytical skill.

1 2 3 4 5 6 7 8 9 [ 10 ] 11 12 13 14 15 16

Seach Parameters


Change search parameters...
CATEGORIES: Other; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out