Resume - I have extensive experience in a wide range of Instrumentation and control syste...

Misco Jobs

Resume #28962

CONTACT INFORMATION:
View contact information...

QUALIFICATIONS:

HND MEASUREMENT &CONTROL ENGINEERING
Falkirk College, Falkirk, Scotland.

ONC INSTRUMENTATION & CONTROL
Falkirk College, Falkirk, Scotland.

Courses Attended: HUET AP/LAP(NOGEPA)Offshore safety introduction, ILO,FULL OFFSHORE MEDICAL,VCA FOR MANAGERS,Permit Receivers (various), Chemical Process Safety, Hazardous Areas & Equipment, D.C.S Shutdown (various), Digital Electronics & Logic, D.C.S Honeywell 3000 (Operation).
Honey well Plantscape configuration/Operation course.
Crosby Safety Relief Valve Overhaul Course. ABB ADVANT PLC System configuration. Safety passport course.
Various safety induction courses around the world.

Computer Experience Extensive use and customising of Instrument database index in MS Access.
Also some experience on Project Planning tools.

SYNOPSIS

EXPERIENCE
I have extensive experience in a wide range of Instrumentation and control systems; covering a range of job functions in various industries i.e. process, chemical and petro-chemical, on-shore oil & gas, pharmaceutical. Involvement in all areas of instrumentation engineering: electrical interfaces and control, design, installation supervision and commissioning. I have DCS and PLC system design, review, Erection and commissioning experience. I have extensive experience using Intrinsically Safe and other Hazardous Area (ExD, ExN etc) design principals and am familiar with engineering solutions using networked instrumentation i.e. FIELDBUS and PLANTWEB. Extensive use and customising of Instrument database index in MS ACCESS, INTOOLS.

Positions Held
SR I & C Commissioning Engineer, Instrument and Control Engineering Manager.
Construction Manager, Control Systems Engineer, Construction Engineer, Maintenance Engineer, Instrument Supervisor, Lead Technician, Commissioning Technician/Supervisor, Instrument Technician.
Plants/Instrumentation
DCS, PLC, ESD, fire & gas systems, petro-chemical, oil & gas, Power Stations, turbine, water treatment, Desalination, sewage treatment, Hydrogen plant, Demi & potable water, photo synthesis, boiler water, storage, analytical, flow, level, pressure, temperature, quantity, hydraulic, pneumatic.
Honeywell, Emerson, Yokogawa Centum CS3000, W.D.P.F.Foxboro, Rosemount, Masoneilan, Vega, Buhler, Tayllor, Eckardt, Gulde, Siemens, Fisher-Porter, Endress-Hauser, Samson, Bopp-Reuiter, Wika, Hereus, Lucifer, Rueger, Raychem, Polymetron, Zellweger Analytics, Maihak, Sigrist, Allen-Bradley, Gensym Advanced Control System, Honeywell TDC 2000/3000, Emerson, ABB Advant, ABB Symphony DCS & PLC, Plantscape.

EMPLOYMENT HISTORY:
Duration: May 2005 - present
Company: AJS (AMEC) (Capital Projects Group)
Project: K17 FA field development Project
Position: lead Pre Commissioning Engineer
Duties:
In charge of pre - commissioning for the K17 FA field development Project which includes modification of two offshore oil rigs.
Convert approved design packages into SAP networks/work orders, and workpacks.
Ensure availability of all necessary manpower resources
Call-off vendors as and when required for construction/commissioning support
Accept all commissioning activities as complete from the various vendors.
Solutions implementation and support of the project team objectives. Provide technical direction on a project basis
Conduct daily/weekly progress meeting with client/vendor.

Duration: Dec 2004 - May 2005
Company: (Enelpower Italy),
Project: yanbu unit 4 project. (Saudi Arabia)
Position: Consortium Commissioning Manager
Duties:
In charge of commissioning for the yambu project which includes one 130MW Ansaldo turbine and boiler with aux plant.
Solutions implementation and support of the project team objectives. Provide technical direction on a project basis
Conduct daily/weekly progress meeting with client and end user reporting back to head office in Italy.
Drive construction for the final completion and acceptance.
Drive the commissioning team for first sync of the unit to the grid.

Duration: March 2004 - DEC 2004
Company: (Enelpower Italy), Qatar (Wide technical Services).
Project: Ras Laffan power plant
Position: SR DCS / I & C Commissioning Engineer
Assigned as SR DCS / I & C Commissioning Engineer on the Ras Laffan Combined Cycle and desalination facility.
Duties: Schedule daily commissioning plan to co-ordinate with project completion dates.
Clear all Non Conformances and punch lists, Carry out witness tests with the client and consultants.
Conducting Hardware & Software tests for DCS and Subsystems.
Fault finding and Troubleshooting DCS Hardware/Software.
Interface with suppliers of DCS, operator stations and software.
Technical assistance for any contractual problems that arise.
Completion of Emerson Ovation DCS commissioning SAT and SIT, working towards final PAC for the plant.
Assist on the commissioning of the various vendor systems, SCADA, GE, and ABB.

Duration: Jan 2003 - Feb 2004
Company: Alstom Power Italia (UAE) (Wide technical Services).
Project: Ruwais GUP Expansion
Position: SR I & C Commissioning Engineer
Assigned as SR I & C Commissioning Engineer on the Ruwais GUP Expansion.
Duties: Schedule daily commissioning plan to co-ordinate with project completion dates.
Clear all Non Conformances and punch lists, Carry out witness tests with the client and consultants.
Interface with suppliers of DCS, operator stations and software.
Technical assistance for any contractual problems that arise.
Co-Ordinate Meetings with Client and project management teams to resolve contractual problems.
Completion of ABB DCS commissioning SAT and SIT, working towards final PAC for the plant.
Completion of the Virtual Process Advanced Control System Performance and SIT/SAT test.
Schedule daily maintenance programs for I & C activities.
Trouble shooting of all I & C Systems, Bentley Nevada, Abb Advent, ABB Symphony DCS.

Duration: Aug 2002 - Jan 2003
Company: Honeywell
Project: Wyieth Bio-Pharmaceutical plant.
Position: Commissioning Engineer
Assigned as Instrument Engineer on the Wyieth Bio-Pharmaceutical plant.
Duties: Co-ordinate team of instrumentation Technicians working in the field (loop checks to ABB PLC System, calibration of transmitters, logic functional checks).
Commissioning of the Honeywell H.V.A.C. Control system Plantscape. The equipment involved includes Boilers, Chillers, and supply, extract and pressurisation dampers, Air Handling Units, MCCs and Fire Alarm Interface.
Make up of system Turn over packages for client.

Duration: July 2002 – Aug 2002
Company: Macfarlin Smith
Project: Poppy Straw Project
Position: Commissioning Engineer
Assigned as Instrument Engineer on the Macfarlin Smith pharmaceutical plant.
Duties: Co-ordinate team of instrumentation Technicians working in the field (loop checks to Siemens PLC System, calibration of transmitters, logic functional checks).
Make up of system Turn over packages for client.

Duration: Nov 2001 - July 2002
Company: Alstom Power Italia (Saudi Arabia). (Wide technical Services).
Project: Shoaiba 3000MW Plant Stage 1 Phase 1 & 2
Position: SR I & C Commissioning Engineer
Assigned as SR Instrument & Control Commissioning Engineer on the Shoaiba 3000MW Power Station Project Saudi Arabia.
Duties: Co-ordinate teams of instrumentation & control technicians working in the field (loop checks, calibration of transmitters, logic functional checks).
Assist construction in the completion and hand over of the erection works.
Schedule daily commissioning plan to co-ordinate with project completion dates.
Keep as per QA/QC standard the test equipment used during commissioning.
Clear all Non Conformances and punch lists
Carry out witness tests with the client and consultants.
Interface with suppliers of PLC's, operator stations and software.
Complete I & C turnover packages for client hand over.
Technical assistance for any contractual problems.

Duration: Sept 2001 - Nov 2001
Company: Syngenta Agrochemical Plant, Grangemouth, Scotland
Project: Shutdown and Maintenance Program.
Position: Maintenance Engineer
Assigned as Maintenance Engineer to the Central Engineering Group covering Azoxystrobin (crop protection) plants.
Duties: Maintenance Engineer to the Central Engineering Group covering Azoxystrobin (crop protection) plants.
Stripdown / reinstatement of instrumentation and control valves during and after plant shutdown
Periods. Implementation of plant preventative maintenance system.

Duration: Jan.2001 - Sept 2001
Company: SEPAM Ltd.
Project: Proposals Dept., Head Office, Ireland
Position: Instrument and Control Engineering Manager.
Assigned as Instrument and Control Engineering Manager for Sepam's bid Department.
Duties: Working in the proposals department for the preparation of Tender proposals, including Pharmaceutical and microelectronics' Projects in Ireland, Singapore, UK, China and mainland Europe. Responsible for all Review of Specifications, Material Take Off, Development of Bills of Materials and Pricing. Review Project Schedule and develop Project Execution Method for Instrument and Control Scope of work.

Duration: Aug.2000 - Jan.2001
Company: Tyco Flow Control
Project: BP Oil
Position: Instrument Support Engineer.
Assigned as Tyco's Instrument Support Engineer for their control systems workshop.
Duties: Planning individual activities; identify spares/materials, subcontract or specialist requirements and resources required.
Identify opportunities for new job methods and improved efficiency.
Schedule jobs i.e. times to complete.
Write job method statements, task risk assessments.
Maintain overall schedule and communication to customer and service centre manager on progress and shortfalls.
Attend daily progress meetings, reporting on current situations, monitoring changes in forward planning and restrictions to progress.

Duration: April.2000 - Aug.2000
Company: ABB
Project: Factory Acceptance Test (FAT) ABB Advant Houston, Texas.
Position: Control Systems Engineer.
Assigned as Control Systems Engineer for the Saudi Aramco Hawiyah Gas Plant Project.
Duties: Design special procedures for DCS and integrated systems, ABB August ESD System, Bentley Nevada Vibration System and CCC Compressor Control System.
Involved in Factory Acceptance Test for the ABB Advant DCS and the integration FAT of Vibration, ESD, and Compressor Control Systems.

Duration: Jan.2000 - April.2000
Company: McConnell Dowell
Project: Aramco Control System Replacement Program
Position: Sr Instrument Engineer.
Assigned as Sr Instrument Engineer for McConnell Dowell on the Control System Replacement Project.
Duties, Review of construction loop packages for final handover to commissioning,
Drive construction & pre-commissioning to completion. Verifying vendor instrument Design criteria to suit plant scope & conditions. Address all contractors & construction initiated site quires.
Writing preventive maintenance Schedule for all Instrument work.

Duration: Aug.'99 - Dec 99
Company: Fluor Daniel
Project: China Program (KODAK)
Position: Instrument Construction Engineer.
Assigned as Construction Engineer on the building & Commissioning of Kodak's new Photo sensitising building. Duties: Address all contractors & construction initiated RFI's. Lead the 80% & 95% complete punch list effort for each turnover package. Provide design and contractual interpretation as required to the contractor. Driving construction to mechanical completion within Kodak's parameters.
Assigned as Engineer for the installation and commissioning of all building and process air handling units and HAVC Control.
Worked on Instrument maintenance schedules from control valves to building services.

Duration: June.'99 - Aug. 99'
Company: Fisher Rosemont
Project: Obaided Development, Egypt.
Position: QA/QC Supervisor
Assigned as QA/QC Supervisor for the Obaided Development Project.
Duties: Inspection of all instrumentation, H.V.A.C. System gas Alarms and ESD Systems. Material and equipment Inspection on Vendor packages and Final Co-ordination of all hand over documents.

Duration: Aug.'98 - May.'99
Company: S A. Kent
Project: Construction Manager Gosp 3 & 4 (Saudi Arabia)
Position: Construction Manager
Assigned as Construction Manager for DCS upgrade of two Gas & Oil Separation Plants.
Duties: Management of all sites for the two gosp's.
Planning individual activities, identify spares/materials, subcontract or specialist requirements and resources required.
Collect and record data for use in performance measurement.

Duration: May.'98 - Aug.'98
Company: Glaxo-Welcome
Project: Instrument maintenance Program
Position: Instrument maintenance Engineer.
Assigned as Instrument maintenance Engineer with Glaxo-Welcome.
Main Duties: Management of all site Instrument maintenance for the plant.
Assign daily job packs for instrument and electrical technicians. Write monthly maintenance schedule for instrument works.

Duration: April.'98 - Jul.'98
Company: James Scott
Project: De-Bottle neck & Turnaround.
Position: Instrument Engineer.
Assigned as Instrument Engineer for the commissioning of Exxon's Ethylene process plant.
Duties: Commissioning & final handover of all Instrument systems. Preparation of instrument loop packs.

Duration: Jan.'98 - March.'98
Company: Balfour Kilpatrick
Project: New Pigment Process Plant.
Position: Instrument Engineer.
Assigned as Instrument Engineer for the Commissioning team on the Ciba pigment plant.
Duties: Loop tuning all instrument systems through the Allan Bradley PLC's, also installation and calibration of the pH Analysers. Responsible for all progress reports, dealing with client's problems.

Duration: April.'97 - Dec.'97
Company: ESSO
Project: Balder F.P.U.
Position: Instrument Engineer
Duties: Review consisting of verification towards the instrument data sheets, certificates Asbuilt design drawings & test records in line with the requirements of N.P.D., NVE, IEC & NMD regulations and project specifications. Main function being certification of instruments in hazardous areas including IP & EX ratings. Preparation of work packs for mechanical completion & pre-commissioning.

Duration: 1982 – 1997.
Company: Insertech
Project: Various
Position: Maintenance/Instrument Technician/ SR Instrument Technician
Assigned on various contracts after my formal training oil and gas, Petro-chem, Power and Water plants.
Duties: loop tuning /checking, installation & commissioning of various instrument control systems.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 401 to 450 of 819)

Go to Search Parameters...

Brief Description

Trucking experience 20 plus years, good on tools, excellent mechanical understanding

Experienced electrical sales, buyer, customer service,contract negotiations,job bidder

Land surveyor with over 30 years experience

Extensice technical skills incorporating computer literacy & engineering discipline. Highly regarded for a proactive attitude and an ability to thinl literally, providing idead & solutions. A dedicated individual, achieving reputation for consistently going beyond what is required.

Environmental Health Safety and Emergency Management Specialist / Safety Trainer in Oil and Gas, Petrochemical and Marine Industries with 15 years experience.

Experienced underground hard rock miner. Any way you can point your finger I have mined

Heavy Equipment Operator/Upend Labourer

I have completed Masters in Commerce( MCOM) and i have more than 7 years expereis in Accounts/Audit.I have strong knowledge in Tally and SAP- Sales & Distribution model

Long experience, professional skills, mastered business sectors: Oil - Petrochemical plants, Banks, Government organizations, Multinational organizations, Hotels & Commercial companies all with its different type of applications, working environments and unique needs.

CAD Designer (electrical/instrument) Extensive years of experience in AutoCAD (Rel. 2004)

International HR Manager

I have a comprehensive knowledge of Industrial Health,Safety &Environment with focus on Oil & Gas and construction industry safety, HSE Training, Inspection of facilities for proper HSE management system. Hazard & operability studies of Projects & sites' Job Safety Hazard Analysis & risk assessment.

PIM EDW EDMS CAD INTERGRAPH Engineer. 11 years of experience on IT Application in Engineering, Working on Engineering Data / Document Management, Intergraph CAD System and EDMS (Electronic Document Management System) (such as PDS, Smart Plant products, AIM, Directa, SPF); Experienced in Oracle Data

Procurement Purchasing Logistics Inventory Control Contracts Negotiations

Security Executive with massive corporate and international exposure. Expert in Afrcan matters and have massive and extensive security network in Africa.

disaster management; project management; consultant; liaison

HSE Remote Safety Medic, Offshore Medic, Emergency Medical Technician, Safety Officer

Industrial Electrician 20 yrs. experience in automated industries. PLC, instrumentation, construction, commissioning and maintenance / troubleshooting

Conducting safety exercis and instruciton conducting toolbox talk ,Carry out the duties of safety Officer

Maintenance Planning scheduling, Maximo, Ms Office- Word, Excel, Power Point etc. Excellant English communications, Dedicated, organized, time management, result oriented, punctual and hard working

Over 20 years Quality Management and Supervision experience in Heavy Engineering Construction Industry

Talented HR professional with a generalist background. Experienced working in a professional services environment with complex hierarchies and matrix management. Ability to operate at both a strategic and operational level, within a geographically diverse team and in an international role.

I Mohammed Yaseen Kajee hereby wish to apply for employment through your company in the capacity of Client Projects Quality Manager, Senior Client Quality Assurance Engineer / Inspector and Client Safety Representative. I have had extensive experience in Quality Management Systems , Pressure Vesse

I have 28 years experience in maintenance, the experience gained in the instrumentation trade up to the management level. I have gained vast experience in technical faultfinding and technical and staff related problem solving, mostly in the shortest time due to process requirements.

Since April 2004: Aeronautic Source Inspector “hardware” in Bourges and Méru (only 1 to 2 missions of 4 hours/month) for a diversified technology and manufacturing leader, serving customers worldwide with aerospace products and services (40% of sales); control technologies for buildings, etc

Experienced in deep excavations for 20 years, specializing in sewer and water and installation of large diameter pipe, as well as Mass excavation and Heavy Highway work.

I at DK India shoulder the responsibility of showing readers the actual position of their destinations on accurately and intricately crafted maps. The scale varies from large country maps to small walk maps, which guide those traveling by foot from one tourist attraction to another

Experience in heavy industries as Oil and Gas, Power Plant installation, Piping and pipeline, Rotating and Static equipments. Experience in, welding and fabrications, equipments installation, commissioning, machine repair and maintenance. Experience in complex machine and equipment assemblies.

I have extensive experience in a wide range of Instrumentation and control systems; covering a range of job functions in various industries i.e. process, chemical and petro-chemical, on-shore oil & gas, pharmaceutical. Involvement in all areas of instrumentation engineering: electrical interfaces an

I am an experienced member of a Cost Management company based in Abu Dhabi with previous experience as a Quantity Surveyor in a variety of fields including construction, development and consultancy services. As an industry professional with a Diploma in National Building Science, extensive technical

Innovative thinker with broad-based expertise in human resources, and business development.

Roughneck, Roustabout, Rigger, Rig Clerk, HLO

Manufacturing, Maintenance, Sales and Service, Application Engg, Project Engg, Administration

Free! DYNAMIC PROFESSIONAL - MASTER OF SCIENCE - CONSTRUCTION SAFETY COORDINATOR - PROJECT MANAGER -ADVANCED FIRST AID, SAFETY, & RESCUE

Hardworking, easy learner,..... Bachelor of engineering in instrumentation

With over 9 years of experience in U-verse (IPTV, HSIA and CvoIP) Secornd Level Technical Support (Tier 2) and Fiber Optic (Video, Voice and Data) installation, Cable TV technical communication, satellite installations, hard work, imagination and commitment, together with strong communication and in

Financial Manager (expat)

20+ years of experience with the environmental aspects of major energy projects - power plants, pipelines, transmission lines, refineries.

Oracle Functional Consultant with over 10 years of experience in the Finance domain

Piping and Welding Supervisor QA

Engineer with 15 years of experience in Supply Chain, Operation, Project & Construction management

A Process Instrumentation diploma holder with 14 + Years Experienced in MNC EPC and Client side as E&I Inspector, presently working in Maersk oil Qatar and deputed in india and oman. seeks suitable opening.

I¡¦m a Canadian/ Syrian citizen with Business, Engineering, Water/Wastewater and (HSE) Health Safety Environment Background I have been working in the field of HSE (Health Safety Environment) management for past 10 years/ 5 yr Management HR BUS PR Project GS ADM OPS

Environmental Consutlant/ Management - International Experience

Safety Officer, Process Supervisor and Marine Engine Driver and experienced in Petrochemicals, Power Plant and Marine Industry

Team Player, Leadership Skills, Priority Setting, Multi-Task, Organizational Skill, Attention to Detail, 5S/ Six Sigma Certified

Temporary Cards for Surface and Underground Mining

Senior Process Engineer with 14 years of Experience in Oil and Gas and Petrochemical

In addition to academic work, my experience also includes working voluntarily, part-time and full time with both local and international organizations, as you will see in my CV. My work in these organizations hinges on working at community levels in various projects and researches.

35 + year mechanic

1 2 3 4 5 6 7 8 [ 9 ] 10 11 12 13 14 15 16 17

Seach Parameters


Change search parameters...
CATEGORIES: Other; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out