Resume - Was employed in the capacity of safety and health officer in various project in ...

Misco Jobs

Resume #71900

CONTACT INFORMATION:
View contact information...

EDUCATION QUALIFIACTIONS:

1978 – 1980: St. Michael's Institute Primary, Ipoh, Perak.

1981 – 1983: Anglo – Chinese Primary School (ACPS) Seremban, Ng. Sembilan

1984 – 1988: Anglo – Chinese Secondary School (ACSS) Seremban, Ng. Sembilan

1986: Sijil Rendah Pelajaran (SRP) – Grade A

1988: Sijil Pelajaran Malaysia (SPM) – Grade 3 ( 'O' Levels )

2004: National Institute of Occupational safety and Health Malaysia
SHO course.

2006: BASIC FIRST AID & CPR TRAINING

WORKING EXPERIENCES

LEIGHTON INDIA
July 19, 2006 – April 30, 2008
HSE and Security Manager

Employed to implement the HSE requirements of the company on the project to a standard that will be acceptable to Leighton International Australia and reporting to the Project Manager. Keeping all records as per ISO standards and requirement. To promote HSE at all levels at site and to the surrounding villages. Also implementing a system that will in-cooperate the Indian government HSE and the company HSE requirement.

I was also in-charge of security. I created a security plan and implemented it through a Security Manager reporting to me.

HEALTH, SAFETY AND ENVIRONMENT ASPECT: -

- Formulate preventive measure on personnel injuries.
- Formulate preventive measure on damage to plant and equipment
- Safe working method implementation
- Legal requirement advise to the management
- Use of proper protective equipment implementation.
- Potential Hazards in the working area identification
- Feedback on Policies and procedures
- Incident Accident investigation.
- Safety audits
- Job HSE Analysis
- Safety Training when required
- Risk assessment
- HSE promotions
- Circulation of HSE information
- Write plans when required
- Created HSE forms when required
- Created Traffic Management Plan and implement it on the project
- Created an emergency Plan for the Locals and the Expatriates working on project.
- Created supervisory training module.
- Created health information slides.
- In-charge of the project traffic management and the implementations.

All aspect of Environment on the project was the responsibility of the Environment Officer. All promotion, induction, trainings and etc on environment was his duty reporting to me.

I would also review the plans periodically and revise the plans as required and would inspected every plant and make recommendations of improvements. I took on duties as per the instruction of the Project Manager.

EMRAIL SDN BHD
June 02, 2002
Safety Officer, QA / QC Supervisor

Transferred from QAQC to the Safety Department on the 9th August 2002 to assist the Safety Manager as a Safety and Security Officer as one of the safety Officers to implement the Projects Safety Procedures and Plan and the Occupational Safety and Health 1994 procedures and also to assist in the security matters of the company at site. My other duties are also: -

SAFETY ASPECT:
- a member of the Safety Committee
- to write up the clients Monthly Safety Report
- to write up the company' monthly Safety Report
- to conduct toolbox talks periodically
- to induct new staffs and workers
- to conduct site inspections on safety and environment
- to conduct incident / accident investigations and to write the report
- in-charge of all safety records
- to conduct JSA (if required)
- liaising with the clients Safety Department
- commissioning and auditing of construction level crossings

SECURITY ASPECT:
- to assist the site personnel to station guards at site
- night inspection on site where there are guards stationed
- to liaise with the Security Company
- to liaise with the Police personnel in-case of an security incident
- in-charge of all security records
- in-charge of the uniformed security supervisors

Employed as an QA/QC supervisor to assist the QA/QC manager at Slim River site office to take charge of the site QAQC works as listed below: -

- to establish work records ( civil and track )
- to check on the works at site
- to attend the client' QAQC meetings
- to attend to the QAQC NCRs
- to liaise with client and the consultants regarding QAQC
- to conduct joint inspection with the client
- to acknowledge receiving of formation from sub-contractors and client.
- Receiving of Government issued materials

EKD CONSTUCTION SDN BDH
June 19, 2000
QC Supervisor

Employed to assist the QC Engineer at the Kuala Lumpur Sentral Project in the capacity of a QC Inspector to carry out site inspection on various C&S works of the project which includes carrying out sport checks on site for:

- Rebar – assembly and the condition of the rebar
- The formwork – sufficient cover, verticality and condition of the wood or metal
- Concrete – type of concrete being used, slump is within tolerance, test cube are made accordingly and concrete is being carried out correctly.

In addition to these duties, I was in charge of auditing the QC documents on the works for the C&S Production Department, the M&E Production Department and the Railway Department.

DAMANSARA SOMMAS
April 13, 1999
Site Supervisor

Employed by an infra-structure company, I was in charge of laborers, sub-contractors and the machineries. Delegating specific works to the masons and carpenters ( the construction of manholes and making of formworks for varies concreting works) inspecting the sub-contractors work, making sure that the work being carried out is in accordance with the specifications. Carrying out earth works with machineries such as excavating for sewage VC pipes, drainage, sewage manholes, drainages sumps, cutting of slopes, removing excess earth from work site with lorries, excavating for retaining wall, ground excavation to sub-grade level for road works. Laying of crusher run for road works and doing all other concrete works.

Was also in charge for liaison with the Resident Engineer and Main Contractor's representative regarding drawing changers, design changes, suggestion made to alter design to reduce cost as part of site problem solving as some of the other duties entrusted to myself.

IJM BINAMAJU JV SDN BHD
February 17, 1997 – February 17, 1998
QC Inspector and Site Supervisor

Reporting to the Construction Manager to perform a dual role as a QC Inspector and a Site Supervisor on the 2.4 Billion Kuala Lumpur Monorail Project (Phase 1).

QC INSPECTOR

As an QC Inspector, I was responsible for verifying specifications and drawing compliance of pre-cast concrete works i.e. monorail guideway support beams and geotechnical construction works i.e. deep bore and micro-pile foundation including pile caps. This incorporation carrying out and signing off in-process and final inspection as per detail checklist.

Principle Inspection item
- Steel mould dimensional checks.
- Per-stressed and fibre – optic duct positioning.
- Rebar- size, dimensional and quality per beam check.
- Crosshead beam to support column connection points.
- Precast items identification and reference tagging verification for storage.
- Survey, set out and as-built coordination activities.
- Incoming material quality and quantity verification.

SUPERVISORY ASPECT

Site Supervisor incorporated schedule coordination and monitoring of daily works of sub-contractors i.e. mainly daily progress records, manpower – material and plant requirements, quality and safety policies implementation, review of bore-log records, concrete quantity estimation and cube test analysis, resolution of daily problems and planning including liaison with client and consultant representative.

JOHN HOLLAND (M) SND BHD – LRT START PROJECT
AUGUST 5, 1996 – FEBRUARY 6, 1997
Quality and safety Officer

Employed as an Quality and Safety Officer reporting to the Quality and Safety Coordination associated with the track works for the Light Rail Transit Project.

Conducting incoming inspection of procurement items principally associated with special process:
- Termite welding application for track joining.
- Installation of geo-textile material.

Ensure that installation process complied with method statements, specification and manufacturers criteria. Incorporated the application checklist requirements including indexing and filing as project rack sequence for eventual QA auditing.

The above were pre-final completion aspects and regarded as critical processes which required certification. Associated control activities are:

- Compilation of as-built survey records.
- Welding preparation and calibration post-grinding.
- Ballast stone installation and sieve test monitoring.
- Ensuring the handling and storage characteristics.

In view of the elevated nature of works, I was also coordinating safety tool box talks, ordering of safety materials, conducted safety audits at site, attended safety committee meeting for the project, delegation of works and site safety inspections.

TAYLOR WOODROW
March 9, 1993 – August 1, 1996
Site Clerk / Site Administrator / Site Supervisor

Initially employed as a Site Clerk / Administrator assisting and reporting directly to the Project Manager accountable for the civil i.e. piling and structural foundation aspects, for the RM 4.7 Billion ( Phase 1 and 2) Light Rail Transit (STAR) project.

Responsible for collating operational project records i.e. time keeping, plant and material resources, construction activity report, purchasing and office supplies, etc.

Was given internal training in utilizing the company Document Management system which further to the above included the implementing and maintaining of applicable drawing control, register updates, records of drawing changers and distribution.

Once the above was established, I was later assigned to the Project Engineer to fulfill the Site Supervisory aspects:

- Plant Mobilization and spoil excavation disposal.
- Welding of bore-pile rebar cages and splicing.
- Concrete quantity and trimmie pipe length calculation.
- Monitoring of bore-logs and concrete cube test results.
- Field liaison with sub-contractors and consulting engineers

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1 to 50 of 755)

Go to Search Parameters...

Brief Description

Free! Experienced Safety engineer, CSP. Bilingual Spanish/English. Authorized to work in the European Community.

• As a professional journalist for over 20 years, worked for and with on-line, as well as hard copy publications as a writer/ Photographer.

Consistently an asset to the company, an energetic and innovative individual, with over twenty (20) years experience as Engineering and Materials Manager from different company. Have developed through the years a summary of professional strength as follows:

Expertise: land acquisition,joint venture/sale negotiations, contract negotiations

Accomplished Art Director/Sign Designer/ Structural Sign Designer with over 18 years experience working closely with creative teams in the concept through production of commercial signs.

Safety Manager with strong safety skills. OSHA 500 certified.

Marine Dredging Engineer

Over 18 years in the government service as Fire Safety/Fireman/Arson Investigator in the Philippines

Property Services

Extensive experience in safety management and operations spanning construction, seafood, industrial, retail, government, marine, airline, energy, industries. I am, Passionate about quality, and customer satisfaction. With a record of improving efficiency, productivity, and profitability through pro

Experienced Architect with solid knowledge and practice of CAD (ArchiCAD & AutoCAD) and artistic presentations of projects.

B.Sc.1977, V.G. Honours, M.Sc.1985. Consultant and Executive Director (> 40 Transport & Railway projects). Teach Transport Planning, Railway Eng. & Applied Statistics & Eng. Systems for undergraduate, Faculty of Eng., Cairo Uni. DOS, Win., AutoCad, MSOffice. Organizing the 3rd CODATU-III Conference

An HSE professional that has made significant input over the last ten years to the development of Occupational Health, Safety and Environment (HSE) as it affects the oil and gas industry. I am self motivated, result driven and possess strong business acumen with ability to motivate and drive

I am experience in AutoCAD Drafting/ Electrical TEchnicain/ Communication Technicain

My experience in the Piping and Mechanical fields is both diverse and extensive. I have stayed in the Heavy Industrial sector all of my working life.

Award Winning and Experienced Dispatcher/Customer Relations/Service Coordinator

Materials, Warehouse, Asset, Logistics Management

(Mechanical & HSE Supervisor)

Hard dollar Mechanical Estimator/Project Manager experienced with Estimation and Quick Pen seeks West Coast Position.

BS Business Administration Major in Accounting graduate and presently a Materials Management Manager

SHE Official

Results-oriented Mechanical Engineer with strong analytical and effective interpersonal skills. Corporate site and office experience in all facets of Engineering at design/build, manufacturing, consulting and telecommunications companies in Canada, USA and Europe.

WORKING AS A SAFETY OFFICER IN A COMPANY IN QATAR

Qualification master degree(statistics)=profession=cost controller in construction

I have total 10 years of Work experience 5 years in middle east as a procurment officer. I have material knowledge, good negotatiton skills, Good commounication skill. Analytical and commonsense approach to given task, skilled in planning, Co-operation and directing,Self motivated and productive

Having good knowledge in Construction field, having 11 years experience in safety filed. Having B.Sc degree. Good knowledge about scaffolding, equipments. audits. inspections.

Resouceful, Independent Thinking Team Player has legal, business and financial expertise

Designer / Draftsman

Ten years of Architectural design and Construction management. I have had the opportunity to work in the office with Autocad 2007 as well as organizing the projects with interior designers, landscape architects, engineers and builders. Working in the field making on site decision about the final.

Construction Manager seeks position in Caribbean. Experienced in capital project management and construction management.

Analyze, design, develop, implement, and evaluate performance improvement programs using the ADDIE process. Experienced in designing and developing online (Web-based e-Learning) and blended learning as well as video training. Have used/been trained in Microsoft Word, PowerPoint, Excel, and Project,

I am skilled in operating many heavy equipment such as Excavator, Wheel Loader, Backhoe Loader, Bulldozer, Vibrator Sheet Pile Excavator, Long Arm Excavator, Back Pusher Tractor, Compactor,Hydraulic Breaker Hammer Excavator,Hydraulic Breaker Hammer Backhoe Loader.

I've work in construction most of my life ,I like doing it and I'm very good with grade work.

Architect urban designer with aptitude for designing and detailing large scale building complexes and buildings

Was employed in the capacity of safety and health officer in various project in Malaysia as well as India. With nearly over 15 years of experience in the construction industries

welding inspector structural,piping and coating inspector

A well versed user of AutoCADD 2208; Revit Architecture / Structural / MEP; Solid Works; 12d; Autodesk Viz

Demonstrated ability to build on a technical trade qualification applied in a teaching environment with strong skills in coaching, motivation and communication. I am now looking to combine my technical trade skills and strong inter-personal skills with opportunities in the resources sector.

mapping

A strong technical background is complemented by practical financial, managerial, commercial, and communications experience developed in worldwide assignments.

ARC HITECT PLANNER (5 YEARS EXP )

Aerospace / Aeronautical Engineer with Post Graduation on Aerospace with 6 to 7 years of Experience

I am skilled in all types of welding.

Planning & Scheduling, Construction

Well Experienced Human Resources Professional in Recruitment, Salary Administration, Writing of Job Writing, Employee Relation, Employee Record Administration, Leave Record, and Settlement

Preparation of Techno-Commercial Proposal for various LSTK Projects like, Refineries, Petro-Chemical Companies, Steel Plants, Power Plants, Oil Bulk Plants, Gas Plants, Substations, Cable Laying, Plant Utilities and Various Industrial Projects.

Seeking an Interesting and challenging position in Safety

3-D mapping, preparation of Face logs, monitoring & analysis the defomation

Supply Chain Management, Cost Reduction, Global Product Management, Inventory Planning, Process Development, Cost Management, Vendor Management and Relationships

Experience in all phases of material management & expediting, design office & engineering & project coordination. Experience in heavy construction including offshore oil platforms & related facilities, nuclear fuelled power plants, paper mill, chemical plant & overseas military facilities.

[ 1 ] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Seach Parameters


Change search parameters...
CATEGORIES: Other; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out