Resume - Safety Officer, Process Supervisor and Marine Engine Driver and experienced in P...

Misco Jobs

Resume #77445

CONTACT INFORMATION:
View contact information...

April 2008 to October 2008 (Six month contact)
Yanbu Petrochemical Company (Yansab)
Yanbu Al-Sinaiyah. Kingdom of Saudi Arabia.

Commissioning Safety Officer
As a focal person from Safety, Health and Environmental Department to manage and control the hazards and high risk activities during simultaneous construction, pre commissioning, commissioning and plant start up to avoid any injury, equipment damage, impact on environment and community health adversely

* Participate in daily coordination meeting and monthly safety meeting.
* Participate in progress meeting, preparing and issue of permit to work.
* Review and update Safety, Health and Environmental procedure.
* Making certain that operators and contractors are well trained and made aware of various activities, regard to safety, health and environment. Training on safe working culture, emergency drill and etc.
* Safety induction for new operators and contractors.
* Participate in preparing job safety analysis.
* Participate during incident investigation.
* Identify and control any conflicting activities at designated Interface Area within owner and main contractor during pre commissioning and commissioning stage.
* Liaise with Fire Department for unannounced, announced or desktop exercise "Emergency Drill" to operators and contractors.
* Liaise with Environmental Department for schedule waste management
* Liaise with Occupational Doctor for operator's medical record such as hearing test, physical fitness, drug and alcohol analysis and etc.
* Liaise with Technical Department for licensing on fired and unfired pressure vessel, radiation sources and lifting machinery.
* Liaise with Local Authority during machinery installation and performance test prior to get approval for Certificate to Operate
* Purchase, control and issuing personal protective equipment to operators

1st January 2002 to 30th March 2008
Acrylics Complex, BASF PETRONAS Chemicals Sdn Bhd
Kuantan Site, Pahang. Malaysia

Operation Safety Coordinator
As a focal person from safety, health and environmental department to manage and control the hazards and high risk activities during normal operation, plant shutdown or turnaround to avoid any injury, equipment damage, impact on environment and community health adversely

* Provide overall support and coordinate acrylic complex staff resulting in safe operation of the BASF PETRONAS Chemicals Complex.
* As a secretary during monthly safety committee meeting.
* Review and update Safety, Health and Environmental procedure.
* Making certain that employees are well trained and made aware of various activities regard to safety, health and environment.
* Liaise with fire department for unannounced, announced or desktop exercise "Emergency Drill" to operators and contractors.
* Liaise with environmental department for schedule waste management.
* Liaise with technical department for licensing review on fired and unfired pressure vessel, radiation sources and lifting machinery.
* Liaise with occupational doctor for operator's medical record such as hearing test, physical fitness, drug and alcohol analysis and etc.
* Liaise with local authority during plant turnaround prior to get approval for certificate to operate and monitoring turnaround activities
* Safety induction for operators, training on safe working culture, emergency drill, waste management and etc
* Attend progress meeting, preparing and assist shift supervisor for issuing of permit to work, systems isolation and normalization

1st.June 1999 to 31 Dec 2001
Acrylics Complex, BASF PETRONAS Chemicals Sdn Bhd
Kuantan Site, Pahang. Malaysia

Senior Executive Production
As a focal person from operation department to maintained smooth and safe operation of production plant and machineries in order to meet the required production levels to achieve the daily targets.

* Act as On Scene Commander during emergency
* Perform daily operation of producing 520 metric tonnes of acrylic acid and despatch to port storage.
* Manage and control the hazards during normal operation, shutdown and turnaround to avoid injury, equipment damage, impact on environment and community health adversely.
* Perform permit to work issuing and closing, equipment isolation prior for maintenance and normalization upon job completed.
* Schedule waste and contractor's management
* Responsible in yearly performance and evaluation for the operation technician

1996 to 1999
YTL Power Services Sdn Bhd
Paka Power Station, Terengganu. Malaysia

Operation Controller
As a focal person from operation department to maintained smooth and safe operation of electrical power plant in order to meet the required electricity production targets.

* Responsible during commissioning and start-up activities.
* Perform daily operation of generating 800 megawatt electricity power for the national grid.
* Maintain smooth and safe operation of 4 units of gas turbine, 2 units of waste heat recovery boilers and 2 units of steam turbine, and others auxiliaries system.
* Start up and Shutdown according to load schedule and liaise with national load dispatch centre prior to synchronize or de synchronize power to and from the national grid.
* Perform permit to work issuing and closing, equipment isolation prior for maintenance and normalization upon job completed.
* Cooperates with system dispatchers relative to load voltage and frequency changes, adjusting controls of generating accordingly to operating schedule.
* Maintains daily log, record of all dispatcher and attend trouble calls.
* Responsible in yearly performance and evaluation for the operation technician

1992 to 1996
MTBE Malaysia Sdn Bhd. (PETRONAS)
Kuantan, Pahang. Malaysia

Boiler Operator
As a focal person from operation department to maintained smooth and safe operation of high pressure boilers and waste heat recovery boiler and others auxiliaries systems.

* Perform daily operation of 3 unit's high pressure steam boilers and 1 unit of waste heat recovery boiler. Maintain smooth and safe operation, start-up and shutdown.
* Produce demineralised water and managed waste water treatment plant.
* Responsible in preparation for equipments prior to hand over for maintenance.
* Maintain weekly test run to all safety equipment in order to confirm healthy and ready to be used.

1979 to 1992
Malaysian International Shipping Corporation
Jalan Conlay. Kuala Lumpur. Malaysia.

Marine Engine Driver
Responsible for installation assessment and sign off, ensuring adherence to company required standards. Completing and performed unit acceptance test.

* To start Electrical Generator, Air Compressor, Pumps, Boiler, Main Engine and others auxiliaries system
* Performed sea trials for performance test with witness of ship building warranty engineer
* Performed engine room watch keeping hours.
* Collecting and analyzing data.
* Perform smooth and safe operation of vessel during navigation, berthing, anchorage, loading and unloading activities
* Performed smooth and safe during maneuvering and coming to alongside
* Liaise with Deck Officer for ballast and de ballast of vessel
* Prepare schedule maintenance for engine room system
* Responsible for readiness of vessel life boat and fire fighting system
* Mentor to Marine Cadet Engineer and Engine Crew.

PERSONAL SKILL

* Ability to perform field inspections, risk assessment, review, prepare procedure and handle permit to work system
* Ability to improved performance, utilizes effective follow up actions to solve employee or work related problems
* Self-development in administration and management skills
* Good in personal computer knowledge such as Microsoft Word, Excel and Power Point.
* Able to communicate at all level of people.
* Licensed and able to operate Incinerator, Steam Boiler, Steam Turbine, Gas Turbine and Marine Diesel Engine by Department of Occupational Safety and Health and Marine Harbor of Malaysia.
* Word, Excel, PowerPoint, Internet & Email

EDUCATION

2007
UTEC Consultancy and University Malaysia of Pahang
Kuantan. Malaysia
Safety and Health Officer

1998
Factory and Machinery Department of Malaysia
Kuala Terengganu
Second Grade Driver Gas Turbine and Diesel Engine

1990
Factory and Machinery Department of Malaysia
Kuala Lumpur
First Grade Driver Steam Boiler and Steam Engine

1985
Marine Harbour Malaysia, Port Kelang, Selangor
Third Class Engine Driver (Motor)

1985
Marine Academy of Malaysia. Malacca
Fire Fighting and First Aid at Sea

1977 to 1979
Marine Academy of Malaysia. Malacca
General Purpose Marine Cadet

1974 to 1976
Sekolah Menengah Tengku Ampuan Jemaah
Port Kelang, Selangor
Lower Certificate of Education Malaysia

TRAINING

7th 8th Sept to 9th Sept 2005
Successful Project Management by NTP World Forum and Institute of Professional Development and Open University of Malaysia

9th 10th Aug to 11th Aug 2004
Effective Business Writing Skills for Executive & Managers by Institute Management Malaysia (MIM)

23rd 24th July to 25th July 2002
Supervisor Development Program by Development Dimensions International
(DDI)Malaysia

6th Dec 2001
Hearing Conservation Program by Mediviron, Malaysia

25th Oct to 26th Oct 2001
Incident Investigation & Hazard Identification by Institute Petroleum PETRONAS
(INSTEP)

16th Aug to 17th Aug 2001
Environmental Management & Quality Act 1974 by Sekitar Synergy Sdn Bhd

14th July to 15th July 2000
Fundamental Knowledge Incinerator and Central Boiler by Oschatz GmbH, Germany
Incinerator and Boiler Burner Management by Mehidau & Steinfath,GmbH,Germany

14th July to 15th July 1999
Fire Fighting & Breathing Apparatus by Terengganu Safety Training Centre (TATI)

10th June to 21st June 1999
Centrifugal Compressor & Sumivac II Control by Nuovo Pignone from
Florence, Italy

1985
Marine Academy of Malaysia. Malacca
Fire Fighting and First Aid at Sea

1982
Outward Bound School of Malaysia
Lumut, Perak

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 401 to 450 of 819)

Go to Search Parameters...

Brief Description

Trucking experience 20 plus years, good on tools, excellent mechanical understanding

Experienced electrical sales, buyer, customer service,contract negotiations,job bidder

Land surveyor with over 30 years experience

Extensice technical skills incorporating computer literacy & engineering discipline. Highly regarded for a proactive attitude and an ability to thinl literally, providing idead & solutions. A dedicated individual, achieving reputation for consistently going beyond what is required.

Environmental Health Safety and Emergency Management Specialist / Safety Trainer in Oil and Gas, Petrochemical and Marine Industries with 15 years experience.

Experienced underground hard rock miner. Any way you can point your finger I have mined

Heavy Equipment Operator/Upend Labourer

I have completed Masters in Commerce( MCOM) and i have more than 7 years expereis in Accounts/Audit.I have strong knowledge in Tally and SAP- Sales & Distribution model

Long experience, professional skills, mastered business sectors: Oil - Petrochemical plants, Banks, Government organizations, Multinational organizations, Hotels & Commercial companies all with its different type of applications, working environments and unique needs.

CAD Designer (electrical/instrument) Extensive years of experience in AutoCAD (Rel. 2004)

International HR Manager

I have a comprehensive knowledge of Industrial Health,Safety &Environment with focus on Oil & Gas and construction industry safety, HSE Training, Inspection of facilities for proper HSE management system. Hazard & operability studies of Projects & sites' Job Safety Hazard Analysis & risk assessment.

PIM EDW EDMS CAD INTERGRAPH Engineer. 11 years of experience on IT Application in Engineering, Working on Engineering Data / Document Management, Intergraph CAD System and EDMS (Electronic Document Management System) (such as PDS, Smart Plant products, AIM, Directa, SPF); Experienced in Oracle Data

Procurement Purchasing Logistics Inventory Control Contracts Negotiations

Security Executive with massive corporate and international exposure. Expert in Afrcan matters and have massive and extensive security network in Africa.

disaster management; project management; consultant; liaison

HSE Remote Safety Medic, Offshore Medic, Emergency Medical Technician, Safety Officer

Industrial Electrician 20 yrs. experience in automated industries. PLC, instrumentation, construction, commissioning and maintenance / troubleshooting

Conducting safety exercis and instruciton conducting toolbox talk ,Carry out the duties of safety Officer

Maintenance Planning scheduling, Maximo, Ms Office- Word, Excel, Power Point etc. Excellant English communications, Dedicated, organized, time management, result oriented, punctual and hard working

Over 20 years Quality Management and Supervision experience in Heavy Engineering Construction Industry

Talented HR professional with a generalist background. Experienced working in a professional services environment with complex hierarchies and matrix management. Ability to operate at both a strategic and operational level, within a geographically diverse team and in an international role.

I Mohammed Yaseen Kajee hereby wish to apply for employment through your company in the capacity of Client Projects Quality Manager, Senior Client Quality Assurance Engineer / Inspector and Client Safety Representative. I have had extensive experience in Quality Management Systems , Pressure Vesse

I have 28 years experience in maintenance, the experience gained in the instrumentation trade up to the management level. I have gained vast experience in technical faultfinding and technical and staff related problem solving, mostly in the shortest time due to process requirements.

Since April 2004: Aeronautic Source Inspector “hardware” in Bourges and Méru (only 1 to 2 missions of 4 hours/month) for a diversified technology and manufacturing leader, serving customers worldwide with aerospace products and services (40% of sales); control technologies for buildings, etc

Experienced in deep excavations for 20 years, specializing in sewer and water and installation of large diameter pipe, as well as Mass excavation and Heavy Highway work.

I at DK India shoulder the responsibility of showing readers the actual position of their destinations on accurately and intricately crafted maps. The scale varies from large country maps to small walk maps, which guide those traveling by foot from one tourist attraction to another

Experience in heavy industries as Oil and Gas, Power Plant installation, Piping and pipeline, Rotating and Static equipments. Experience in, welding and fabrications, equipments installation, commissioning, machine repair and maintenance. Experience in complex machine and equipment assemblies.

I have extensive experience in a wide range of Instrumentation and control systems; covering a range of job functions in various industries i.e. process, chemical and petro-chemical, on-shore oil & gas, pharmaceutical. Involvement in all areas of instrumentation engineering: electrical interfaces an

I am an experienced member of a Cost Management company based in Abu Dhabi with previous experience as a Quantity Surveyor in a variety of fields including construction, development and consultancy services. As an industry professional with a Diploma in National Building Science, extensive technical

Innovative thinker with broad-based expertise in human resources, and business development.

Roughneck, Roustabout, Rigger, Rig Clerk, HLO

Manufacturing, Maintenance, Sales and Service, Application Engg, Project Engg, Administration

Free! DYNAMIC PROFESSIONAL - MASTER OF SCIENCE - CONSTRUCTION SAFETY COORDINATOR - PROJECT MANAGER -ADVANCED FIRST AID, SAFETY, & RESCUE

Hardworking, easy learner,..... Bachelor of engineering in instrumentation

With over 9 years of experience in U-verse (IPTV, HSIA and CvoIP) Secornd Level Technical Support (Tier 2) and Fiber Optic (Video, Voice and Data) installation, Cable TV technical communication, satellite installations, hard work, imagination and commitment, together with strong communication and in

Financial Manager (expat)

20+ years of experience with the environmental aspects of major energy projects - power plants, pipelines, transmission lines, refineries.

Oracle Functional Consultant with over 10 years of experience in the Finance domain

Piping and Welding Supervisor QA

Engineer with 15 years of experience in Supply Chain, Operation, Project & Construction management

A Process Instrumentation diploma holder with 14 + Years Experienced in MNC EPC and Client side as E&I Inspector, presently working in Maersk oil Qatar and deputed in india and oman. seeks suitable opening.

I¡¦m a Canadian/ Syrian citizen with Business, Engineering, Water/Wastewater and (HSE) Health Safety Environment Background I have been working in the field of HSE (Health Safety Environment) management for past 10 years/ 5 yr Management HR BUS PR Project GS ADM OPS

Environmental Consutlant/ Management - International Experience

Safety Officer, Process Supervisor and Marine Engine Driver and experienced in Petrochemicals, Power Plant and Marine Industry

Team Player, Leadership Skills, Priority Setting, Multi-Task, Organizational Skill, Attention to Detail, 5S/ Six Sigma Certified

Temporary Cards for Surface and Underground Mining

Senior Process Engineer with 14 years of Experience in Oil and Gas and Petrochemical

In addition to academic work, my experience also includes working voluntarily, part-time and full time with both local and international organizations, as you will see in my CV. My work in these organizations hinges on working at community levels in various projects and researches.

35 + year mechanic

1 2 3 4 5 6 7 8 [ 9 ] 10 11 12 13 14 15 16 17

Seach Parameters


Change search parameters...
CATEGORIES: Other; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out