Resume - Instrument Engineer Mark V, Mark VIe, Siemens S7, Bently Nevada , CCC,CompeX.

Misco Jobs

Resume #81218

CONTACT INFORMATION:
View contact information...

Over 7 year's construction, inspection and maintenance experience in instrumentation and control systems. Field oriented in installation, calibration, commissioning, start up and troubleshooting,, self- motivated, ability to work independently with self-initiative and work under pressure, leadership, planning, organizing and strong problem solving skills.

EXPERIENCE
2006 - present
Instrument and control Gas processing Field Algeria
Provide technical support as a supervisor to the Instrument Department as follows:
ƒÞ Troubleshooting and start-up of gas turbines GE FRAME 5
_Good knowledges on Mark V and Mark VIe Control System..
ƒÞ Troubleshooting and start-up support for the feed gas compressors (Man Turbo under Siemens Simatic S7).
ƒÞ Simatic S7 and Allen Bradley. PLC5 PLC sequence commissioning and modifications.
ƒÞ Good Knowledge on Bently Nevada 3500 Monitoring system and CCC for Anti surge compressors control.
ƒÞ Installing, calibration, maintenance and repair of plant instrument measuring devices (Flow, Level, Pressure, Vibration and Temperature) in various applications.
ƒÞ Maintenance and inspection of Analyzers Including: ABB H2S ¡* ABB¡¨, O2¡¨MAIHAK¡¨ Moisture "AMITEK and O2 Zirconia's Analyzers.
ƒÞ Basic DCS Honeywell TPS Total plant solutions knowledge ( HPM, GUS, PHD, CLM, HM, NIM,LCN, UCN, FSC-fire and gas and ESD- )
ƒÞ Performing fault diagnosis and analyzing data.
ƒÞ Familiar with engineering tools including INtools and Process trend.
ƒÞ Compile drawings (Process flow diagrams, piping and Instrumentation drawings, Loop drawings, Instrument.
ƒÞ Safety Systems including: Draeger, Det-tronics, Sieger and Zellweger, gas detecting systems implementation, inspection and calibration.
ƒÞ Fire & Smoke alarm and detection systems maintenance and implement.
ƒÞ Deluge systems maintenance.
ƒÞ CO2 systems commissioning and maintenance.
ƒÞ Updating of instrument logic drawings.
ƒÞ Writing and preparation of maintenance procedures.
DataStream
ƒÞ Following and supervision of work of preventive and curative maintenance PM/CM using Data-Stream system, preparation of spare parts, stock and direct requisitions distribution and evaluation of the spots to the team.
HAZARDOUS Areas
ƒÞ Familiar with HAZARDOUS areas classifications and its installations.
2004 - 2006 SONAHESS El GASSI Field Hassi-Messaoud -ALGERIA
Instrument Planer engineer
ƒÞ Preventive Maintenance planning schedule (Instrument, Mechanical and Electrical) using MAXIMO 5.2 Software.
ƒÞ Follow-up of the Gas Pressure Apparatus and store spare parts.
ƒÞ Shutdown tasks planning.
2002 - 2004 SONAHESS El GASSI Field Hassi-Messaoud -ALGERIA
Instrument engineer:
ƒÞ Revamping and Intervention on Control Equipments of a Gas-Turbine (MAN-Turbo).
ƒÞ Intervention (Maintenance) on control equipments (Foxboro-Fisher-Masoneilan-Noreseal- Magnitrol -Yokogawa¡K) of: Gas lift plant (CEGELEC), a pumping station (B-Jackson), andSeparation facilities (PETROFAC).
ƒÞ Construction, Control and wiring of new Oil-separators (PETROFAC SEPARATORS).
ƒÞ Inspection & calibration of control valves, pneumatic, hydraulic (SSV Baker Hughes panels) and motor operated.
ƒÞ Supervise instrument calibration and made calibration sheets.

Maximo:
ƒÞ Following and supervision of work of preventive and curative maintenance PM/CM using MAXIMO system, preparation of spare parts and material and service requisitions..
EDUCATION:
ƒÞ June 1995: Baccalaureate Certificate (Electrical Engineering).
ƒÞ 1995/200: Instrument Engineer. From Algerian Petroleum Institute -IAP Boumerdes, Algeria.
TRAINING SESSIONS, DIPLOMAS AND CERTIFICATES
ƒÞ Intensive English course - Oxford University Press- IAP, June 2002.
ƒÞ PETROFAC Separators Course within IHRDC. November 2003.
ƒÞ HSE trainings concerning: Safe drive, Fire extinguisher,, Manual Handling, Lifting and Slinging and Confined space IHRDC. 2004,SONAHESS.
ƒÞ Firefighting, First Aid, Survival -2006 Algeria.
ƒÞ MARKV advanced Speedtronic turbine GE control system at Nuovo Pignione training center - 2007 Florence-Italy.
ƒÞ Siemens SIMATIC S7 PLC course 2007, Ohanet Algeria.
ƒÞ Gas Turbine THM 1304-10 (Man Turbo) Training. April 2007. Ohanet Algeria
ƒÞ Permit to work system training, 2007 Ohanet Algeria.
ƒÞ Data-Stream training - 2007 Ohanet Algeria.
ƒÞ BSC Britsh Safty Concil training level 1 and 2, 2008 Ohanet Algeria.
ƒÞ Basic DCS Honeywell training in site TPS Total plant solutions ( HPM, GUS, PHD, CLM, HM, NIM,LCN, UCN, FSC-fire and gas and ESD- ), 2008, Ohanet Algeria.
ƒÞ Programming on SIMATIC S7 PLC course, Siemens Alger's on November 2008.

ABILITIES
English: Good, French: Good, Arabic: Fluent.
MS Office (Word, EXCEL, Ms PROJECT, Power Point and Outlook.)
Ladder logic, FBD, STL, PLC programming.
CMMS including Maximo 5.2 and DataStream.
Familiar with HAZARDOUS areas classifications and its installations.

PERSONAL INFO
31 years old, married, one daughter.
No smoker. Perfect Health, last check-up may 2008.
Driving license.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 601 to 650 of 819)

Go to Search Parameters...

Brief Description

Biomedical Engineer

Repairs, maintenance, wiring, troubleshooting schematic diagrams of cattlepillar control panel, wiring of the three phase starters e.g. star delta, rotor resistance starters, auto transformers, direct online starters, servicing and installing three phase motors, service of caterpillar alternators.

Strong character and leadership traits – Outstanding work ethic – Quick learner – Self motivated- Dedication to quality job performance- Highly professional attitude- 15 years of experience in a manufacturing production environment.

BEng Civil Engineering, UK MSc Quantity Surveying, UK

Certified security supervisors trainer from SITO. Certified courses on Fire fighting, First Aid and different courses on security operations.

Supervisor

I am a experienced safety coordinator, I am a (CSO) national construciton safety officer and have completed the UofA Occupational Health & Safety Program.

Procurement specialist in the Oil & gas Industry with 9 years experience of procurement/buying/contracts/expediting.

Diploma in fire and safety, osha 30hrs

Construction supervisor (industrial civil works , Algerian HND) (48 GAS wellheads linked to 2 GAS Production trains to 4 GAS marine offloading systems

Rigger crane op scaf

Maintenance Manager/Supervisor - Direct hands-on experience in the start-up of a large hydroforming/manufacturing facility. Excel at directing a cohesive staff in the successful attainment of objectives. Major strengths in planning, problem solving and communication.

Buyer/Purchasing Administrator, Planner/Scheduler, Sub Contract/Coordinator

I have a varied skill sets and expertise which puts me in a unique position to contribute enormously to a wide range of duties and activities- Ranging from Mechanical Engineering (projects and operations), to Project Management and Process Improvement

Process/Electronic Technician

Other than my recent employment my background includes but not limited to: 5+ years in drilling and work over rig experience, I’ve spent at least 1 or more years working or training in every position, 1 year as floor and motorman, 3 years as derrickman

Documentation Specialist

My experience in biological science ranges from working independently to working for, State, Federal Agencies and Environmental Companies. This experience has provided me with valuable skills in conducting field research, data collection and analysis on many threatened and endangered species.

A qualified Deep Sea Captain (Master Mariner) with 15+ years Offshore: - Jack-Up platform (as Barge Master, Rig Mover ) - DynamicPositioning (DP2 Dive/ROV) - Heavy-Lift Constrcution/Offshore Installation/Platform removal/Pile Driving - SEMISUBMERSIBLE Units (as Barge Master)

Searching for a job as an Accounts Assistant

Administration, Marketing, Business Development, Operations & Computers

Instrument Engineer Mark V, Mark VIe, Siemens S7, Bently Nevada , CCC,CompeX.

Cost Engineering / Schedule development and control, Estimating, perfect computer knowledge (programming level). AACEI member. English, Russian, Japanese languages knowledge. 7 years of working experience. Degree in international business administration.

I have qualified N3 in 1998, I worked for Catterpillar and worked my self up to Service Manager, I've been a Group Plant manage, Currently working in the DRC on the Copperbelt as Maintenance Manager.

Motivated scientist looking to bring new and fresh ideas to current environmental projects.

Production Manager with BS in Mechanical Engineering and 8 years of experience in CNC Machine Shops, QC, QHSE, Planning, Inventory Control, Cost Control, Budgeting, ERP (Great Plains), Pro / E, AutoCAD. Good experience in factories start ups. CPIM (Certified in Production and Inventory Management).

I have completed CA - Inter and currently a Chartered Accountant - Finalist from Institute of Chartered Accountants of Pakistan. I am working with Ernst & Young Global Limited in Karachi office for the last 4 years and currently my designation is Senior Auditor.

Supervision, planning, scheduling, coordination, operation & maintenance (proactive & reactive), budgeting/forecasting, optimum inventory management, resource development & deployment, utilities, Auto CAD, ISO 9001

Senior project planner schedule with 12 years heavy industry and construction projects experience ,professional in using MS Project,Primavera P3&P5,MS office,CMMS systema like SAP R/3 , Maximo. Strong technical background , project management and cost control, contract and claim adminstration

INSTRUMENTATION ENGINEER

B2B Marketing, Product Development, Dealer Management, Market Research

NDT TECHNICIAN

Project Manager, Plant Technical Manager, Interface Engineering Coordinator, Pre-commissioning Engineer, Commissioning Engineer, Start-up Engineer, Process Engineer, Chemical Engineer

Sr. Health & Safety Engineer - OHS Procedures, Training, Inspection, Audit; HSE Plan, Objectives, Matrix etc.

Involved in all construction activities including fabrication , installation and control off all structural items.Steel structural estimates include, pipe-racks, elevated pipe supports, pump shelters, access platforms, handrails, et

I am a current registered EMT Paramedic Assessor and First Aid Instructor. I am now working in a local company as a Safety cum Fire Safety Manager. My responsibilities include coordinate and conduct training, investigate and writing incident report, ensure safety at workplace comply.

Dynamic Health & Safety Coordinator Looking For Work In Mining, Heavy Construction Or Oil Industry

International Safety / Risk Professional available for fulltime or contract employment.

Occupational Health Safety & Environmental Practitioner, Post Gruate Cert. in OHS&E Management

Workplace Safety Health Environment Coordinator - Moreton Island Oil Spill Clean Up Project

Finance, Investment Banking, Management consulting

I have my fisrt degree in ghana in one of the best universities in the country as well and am currently working with one of the biggest mining company in the country too.

departmental administration work, sales coordination, tender preparation, individual material costing. B.Sc. (Maths), Certificate and Diploma in Computers

To pursue my career in the field of Construction/Consulting/Project Management Services as a Projects team member, with a challenging and competitive work environment that best utilizes my technical Skills, Experience and Enthusiasm.

Commissioning, servicing, maintenance, diesel gensets, engine-alternator alignments, overhauling diesel engines.

an economics graduate from olabisi onabanjo university. i also belong to a professional memeber of the institute of chartered accountant of nigeria.

Blueprint Reading - Mig, arc and gas welding

Higher Diploma In Business And IT, UBS Computerised System, Basic Knowledge Of Computers And Web Publishing

Service and maintenance of various heavy equipment

HSE ENGINEER AND SUPERVISOR

1 2 3 4 5 6 7 8 9 10 11 12 [ 13 ] 14 15 16 17

Seach Parameters


Change search parameters...
CATEGORIES: Other; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out