Resume - QA/QC Electrical Engineer

Misco Jobs

Resume #84225

CONTACT INFORMATION:
View contact information...

A. PERSONAL DETAIL
Place / Date of Birth: Duri, 4 February 1966
Sex: Male
Marital Status: Married + (2 Children)
Healthy: Excellent
Passport No.: AH 531076

B. EDUCATION BACKGROUND

1. Primary School: SDN 2 Caltex Duri – Riau 1979
2. Secondary School: SMPN 1 Caltex Duri – Riau 1982
3. Senior High School: SMAN 1 Caltex Duri – Riau 1985
4. Engineer Certificate: University in Bandung – West Java
(Graduated Of Technical Division) 1993
Electrical Degree.
C. SKILLS

1. Thorough knowledge of Electrical Principles.
2. Computer literate.
3. Speak and Write English.

D. WORK EXPERIENCE (briefly)

Engineering Abilities: To manage the electrical installation project Electrical Industry; Refinery, Mining and Combine Cycle work on site, Field Design Electrical System pre-commissioning installation. Supervise Installation of High voltage equipment for Switchyard, Transmission line and, Substation. Medium and low voltage Switch gear, Circuit Breakers and MCC with controls and relay systems.
QA/QC Abilities: QA/QC Documentation, Electrical Specification and Installation to commissioning Procedures. Inspection and testing all electrical equipment in accordance to assist in updating Operations Function codes, standards and procedure are ANSI (American National Standard Institute), NEC (National Electrical Code), NEMA (National Electrical Manufactures Association).
PROFESIONAL EXPERIENCES (1992 – 2008)
15 (Fifteen) years experience on Electrical Systems, Maintenance Service and Construction – Plant for Petrochemical, Nickel / gold Mining, Oil and Gas, On-Shore & Off- Shore.

D.14 British Petroleum
Designation: QA/QC - E&I Inspector
Job Location: Guna Nusa Fabricator Cilegon & LNG Tangguh Papua.
Project: BP Tangguh GPF Project (Constructed & Installation Two Platforms - FPSO) & LNG Tangguh Onshore Project ; 2 Train, 3 unit Gas Turbine Power Generation
Reason for leaving: Project completion – 2006 - 2008

Facility Portion of Tangguh LNG Projects Are:
Two (2) Platforms (GPF), Two(2) Train Process Facilities and Three Units Emergency Diesel Generators, Three Unit Gas Turbines & Boilers 3 x 35 MW, and Utiliy Facilities + Main Substation and 8 (Eight) Substation. Perform routine inspection and document result in accordance with approved Project Owner procedures and specifications.

* HEALTH AND SAFETY
* Take leadership in assuring that electrical activities are performed safely and in accordance with the LNG safety policies
* Knowledgeable of and audit compliance to BP Safety and Maintenance Procedures HSE regulations
* Provide guidance for safe work practices and personal protective equipment (PPE) used by crafts and contractors
* Ensure proper documentation of special operating and maintenance instructions associated with electrical equipment
* Knowledgeable of the following:
- National Electric Code
- National Electric Safety Code
- IEEE Documents and White pages

D.13 Tripatra/Fluor Chevron – Duri.
Designation: SLN Construction Superintendent Supervision
Job Location: Chevron Duri (Oil & Gas)
Project name: Flexible Project Management
Present: April. 2006 – Dec'26. 2006
Reason for leaving: Project completion – 2006

D.12 Combine Cycle Gas Turbine Suban Pahse 2 Gas Plan Project
Designated: Pre-Commissioning & Commissioning and Facility Acceptance Coordinator.
Reason for leaving: Completion of Contract (March 2006).
PT. Thiess Contractors Indonesia / Conoco Phillips.
Expansion to an existing Gas Production Facility.

DUTIES AND RESPONSIBILITY
Consist of review of quotations from the vendor and conduct T.B.E technical Bid Evaluations. Witness F.A.T and at the conclusion of site installation conduct S.A.T.
Source calibration equipment for site process instrumentation and personnel.
My team consists of one site Instrument Engineer and one site Electrical engineer along with a crew of 70 personnel to carry out site installation and site acceptance tests by means of a Quality Controlled hand over system to the client.
I then had the over all responsibility of supervising other Engineers in the Mechanical and Piping fields to full fill engineering interface between the client and the J.V partner Hyundai Engineering. Cleared all punch lists.

D. 11 Construction Service CHEVRON Project 2004
Thiess Contractors Indonesia.
Designated: Estimator Engineer and Monitoring E/I Construction Activities
Job Location: Caltex Construction Service Duri Project, Oil and Gas
Present: February.' 04. 2004 – March' 01. 2006

DUTIES AND RESPONSIBILITY
Handling some of electrical & instrumentation, civil work and mechanical work order incoming from Client ( Chevron Pacific Indonesia) to estimate / Calculate and negotiate. To conduct Kick of meeting Work Order Approved between Client and THIESS Contractor C/W Construction Teams. Witness F.A.T and at the conclusion of site installation conduct S.A.T. Organize and supervise Electrical & Instrument construction activities, quality, testing, documentation, Pre-commissioning, commissioning and start-up.

D. 10 ABERDEEN - (FPSO) Off-shore oil and Gas Industry, Shell
Power Generator System Installation' 2003
Designated: Operating Engineer - Electrical Inspector Eng. (QA/QC)
Job Location: North East of Aberdeen (Shell Oil Company – Aggreko).
Reason for leaving: Project completion (July 24' 02 – Jun' 03).

DUTIES AND RESPONSIBILITY
Full Inspection and monitoring Portable Power Plant Installation, Diesel Power Generator Systems (300 KW / 200 MW) Multi Voltage /50Hz/ 60Hz and Load Banks Precision testing for Both Resistive/ Reactive Loads (2.5 Mw – 100 Mw).
Perform routine inspection and document result in accordance with approved Project Owner procedures and specifications.

D.09 PT. Caltex Pacific Indonesia Steam Flood project
Designated: QA/QC – Electrical & Instrumentation Inspector/ Engineering
(Pre-commissioning and Commissioning) Owner Representative
Job Location: Central Gathering Station – 10. Duri Project.
Oil & Gas Facilities – Sumatra.
Reason for leaving: Project completion. (September. 04' 00 – September. 2001

Combine Cycle & Gathering System Project:
Coordinated construction activities 3 x 100 MW Siemens Westinghouse combustion turbines 501D.
Controlled daily activities of the sub-contractor PT. Siemens Indonesia on schedule requirement and engineering interface. Respond to (RFI) request for information and worked with engineering in Head Office.
In addition to my task of completing electrical system for hand over, I controlled the following: E & I, millwright, Building's, and Painting. Compiled all check sheets, involved with pre commissioning, commissioning and start up achieved contractual acceptance of plant hand over by the client.

DUTIES AND RESPONSIBILITY
1. QA/QC documentation and review Contractor construction electrical procedures.
2. Supervise and Monitor Installation of Cable, Cable tray, Lighting, Distribution control panel, all electrical equipment and Grounding system, etc.
3. Perform routine inspection and document result in accordance with approved CPI procedures.
4. Monitor activities of supervision contractor and construction Contractors.
5. Witness and verify Continuity, Merger, HI-POT and Component testing for Medium Voltage & Low Voltage equipment.
6. Monitor Quality control on construction progress activities.
7. Responsible from equipment installation and continue energizing of electrical equipment to pre-commissioning and commissioning.
8. Issued punch listing for out standing works.
9. Review Tested documentation, witness and accept all required Testing for CPI (Client).
10. Etc

D.8 Middle East UAE. Oil Refinery & Power Generation Plant
Designated: Electrical Maintenance Eng.
Job Location: Al – Mubaraz island – (FPSO) Abu Dhabi Oil & Gas Company (ADOC)
Abu Dhabi – GULF (UAE).
Reason for Leaving: Project completion. (Augustus'04' 99 – April. 04' 00).

DUTIES AND RESPONSIBILITY
Maintenance and operational of plant facilities. Turbine generator power supply to Transformer, and than going to switch gear, from switch gear going to ALL WELL HEADS Platform / Central Platform, MCC, Distribution Panel, Motor Electric Over Hauls, Lighting and lighting Panels Distribution, all Electrical Equipment and Modification.

D.7 Newmont Gold Mining (COMBINE CYCLE) Project
Designated: Field Engineer Electrical and Quality Control Engineer
Job Location: PT. Flour Daniel – Sumbawa Batu Hijau Project (Power Plan &
Gold Mining) New-Mont Nusa Tenggara.
Reason for Leaving: Completion of Project. (October 1998 – July'30. 99)

Power Facility Portion of Batu of Batu Hijau Four (4) 28 MW Coal Unit and Nine (9) Diesel Generator Units, and a 150 KV Transmission Line. Project Cost US $ 1.8 Billion.

Combine Cycle Project ( Coal Power House & Diesel Generator)
DUKE FLOUR DANIEL INDONESIA
Coordinated all construction activities on a diesel powered power plant. (Associated Switch Yard 11 KV-150 KV).
Phase two of the contract, coal-fired power plant with four turbines. Responsible for electrical trades
With Electrical speciallist Commissioning bringing total to a round 25 personnel.
Controlled all QA/QC documentation. Involved with commissioning team for client hand over, and acceptance.
DUTIES AND RESPONSIBILTY
1. Manage the electrical Contractors daily construction activities, schedule and progress.
2. QA/QC documentation and specification and verify, contractor procedures.
3. Generate Field Change Request (FCR), Field Purchase Request (FPR) and Request for Information (RFI). Inspect and approve Electrical Installation on site.
4. Witness and verify Continuity, Merger, HI-POT and component testing for Medium voltage & Low voltage equipment.
5. Inspection of Connection and Installation switch gear and MCC panel.
6. Expedite materials for construction and issue field instruction to contractor.
7. Supervise and Inspect Subcontractor (SIEMENS) construction activities.
8. Witness Pre commissioning and commissioning testing.
9. Review all test packages; prepare QA/QC documentation for Turn over to client.
D.6 INCO Nickel Mining Project, Flour Daniel
Designated: QA/QC - E/I Engineer.
Job Location: PT. SNEF/ Fluor Daniel – Soroako, PT. Inco Expansion Project
(Soroako South Sulawesi) (Feb 1998 – Oct 1998).
Reason for Leaving: Project completion 1998 – Certificate.

DUTIES AND RESPONSIBILITY
1. Responsible for project operational safety requirement
2. QA/QC documentation and review contractor installation procedures.
3. Implement & enforce all company policies, procedures and practices.
4. Planing construction electrical and Instrumentation schedule.
5. Monitor construction activities and progress.
6. Witness and monitor electrical and Instrumentation equipment testing.
7. Responsible for test packages documentation from pre-commissioning to final hand over to client.
8.
D. 5 UNOCAL' 76 Combine Cycle Project Unit # 4. 5. 6, Bectel
Designated: Electrical Engineer for Start-up to Commissioning/ Owner Represent.
Job location: Unocal Salak Geothermal Project Unit # 4,5 & 6 (West Java)
Reason for Leaving: Project completion (1998) / Certificate.

DUTIES AND RESPONSIBILITY
1. Perform evaluation and recommendation for power generation project electrical operation system start-up to commissioning acceptance.
2. Assigned as Commissioning Electrical Engineer. Trouble shooting, maintenance for power plant and distribution during shut-down Unit # 4,5,6 and MCC panel and local panel for lighting Power Generation Facility Area and-Resource Production Facility Area.
3. Responsibility too for cleaning ISO-phase Bus Duck and prepared, termination element Space heater and confirmation main transformer. Install and link grounding clutiss on generator out put for Turbine Generator Unit # 4, 5, 6.
4. Inspected and Cleaned Unit # 400, 500, 600 Lube oil Clarifier Heaters.
5. Verify Drawing & specification of Electrical Equipment.
6. QA/QC Electrical Documentation.
7. Verify Punch listing for all Electrical works prior to final acceptance.
8. Planed schedule for electrical start-up, cables modification, installation and other construction activities.
D.4 AMOCO Petrochemical Project
Designated: QA/QC. Electrical Engineer
Job Location: Merak – PTA 1 AMOCO Petrochemical Plant Project
Cilegon – West – Java / PT. IKPT – CHIYODA – J/O
Reason for Leaving: Project Completion (1997) – Certificate.

DUTIES AND RESPONSIBILITY
1. Supervise and Monitor Installation of Cable, cable tray, Lighting, Distribution control panel, electrical equipment and Grounding system, etc
2. Prepare and Verify construction Drawing, Specification and installation procedures of Electrical Equipment.
3. Supervise & Inspection of electrical equipment Installation, testing to - commissioning.
4. Witness cable termination for Medium and Low voltage Power to Switch Gear, MCC, MV/LV electrical Motor.
5. Responsible to QA/QC and Construction Managers.

D.3 Unocal'76 Geothermal power Generator Project Unit # 4, 5 & 6.
Designated: Field Engineer / Engineering Dept.
Job Location: Salak Geothermal Project (West Java)
Fluor Daniel JO IKPT.
Reason for Leaving: Project completion (1996 – 1997) – Certificate.

Combine Cycle Geothermal Power Generation
Directed construction activities on caterpillar generators series 3512.
Controlled all QA/CC documentation pre commissioning, commissioning and start up.
I controlled a very small and dedicated local craft force to achieve start up in a very isolated and troubled province.
We achieved start up on schedule and I trained local staff to switch over to maintenance duties.

DUTIES AND RESPONSIBILITY
1. Verify all Drawings and Specification of Electrical and Instrument.
2. Support the project program for verifying construction quality.
3. Supervision and Inspection to Subcontractor in construction Activity Installation and Hook-Up some Instrument Equipment and Planning Installation Electrical Motor Connection, Power Supply and Compressor.
4. Handling RFI from Subcontractor and Connected all Paper Work
5. Reporting to Engineering Manager.

D.2 Mivan Apartment Project.
Designated: QA/QC – Electrical Engineer.
Job location: Dukuh Golf Apartment Project, Kemayoran,
Jakarta Utara
Leaving for Job: Project completion (1995 – 1996) - Certificate.

DUTIES AND RESPONBILITY
1. Verify Drawing, Specification and Equipment.
2. Inspection of connection pooller and control cables.
3. Supervisor of Installation cable Tray, Lighting and Light distribution panels.
4. Direct Medium Voltage & Low Voltage Equipment testing (continuity, Megger test and HI-pot test. (Feeder, pncc & swgr panels).
5. Prepare document & record or documentation for turn over package)

D.1 Unocal Power Generation Project Unit # 123.
Designated: Unocal Electrical and Instrument Supervision.
Job Location: Gunung Salak Geothermal Plant Project Unit – 1,2,3, (West –
Java) UNOCAL' 76.
Reason for Leaving: Complete Project (1993) – Certificate.

DUTIES AND RESPOSIBILITY
1. Supervise to Subcontractor in Construction Activity Installation in Hook up all Instruments on general Electric (Gas Turbine) Ingersoll (Condensate Pump) and Installation such (Installation Cable Tray). CCS (Compressor Anti Surge Control), PLC.
2. Control all Drawing & Specification of electrical and Instrument.
3. Supervises of Connection all Electrical Motor, Blacke Dur (welding Procedure Specification) Bailey Controls (West Pump Station) Pneumatic Products (Installation Operation & Maintenance).
4. Inspection & Check for Pre Commissioning & Commissioning.
5. Report to Construction Manager

An ambitious and experienced electrical engineer with significant industry knowledge gained via working continuously with management teams, coordination with supervision of various projects Off-Shore, On-Shore and Construction. Pursue a career that will provide a rule of:
E & I Inspection, Construction Manager & QA/ QC manager

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1 to 50 of 819)

Go to Search Parameters...

Brief Description

Free! 23 years in the Mining, Quarry, and Heavy Equipment fields Drilling and Blasting. Drill & Blast Consultant, OSHA & MSHA Certified Trainer Surface and Underground. ISEE Level II Blast Certification.

Manage construction job site from Petro Chemicals, Power & Desalnation, Schools & Public Works jobs.

Over 19 years in the government service as Fire Safety/Fireman/Arson Investigator in the Philippines

Diplam in civil engineer

2 yr degree in land surveying, high shcool , autocad.

QA/QC Electrical Engineer

Over fifteen years experience as Certified Business Continuity Professional with over ten years experience as Project Management,Technical Writer and trainer and over a year as a SEI/CMMI Auditor, completing projects ontime and within budget.

16 years extensive experience in the field of Health, Safety and Environment (HSE) in multi-discipline heavy construction projects covering site management, planning, training and developing all aspects of accident prevention. Manage HSE program while ensuring compliance with all government reg

Senior Health, Safety & Environmental Practitioner and Trainer

Qualified applicant with years of experience in the material handling related to Oil & gas construction project. I have good knowledge of the methods, materials, equipments and tools used in the petrochemicals projects. Also conversant with ASTM and API specifications

Close supervision of projects handle and monitoring

B.Sc.1977, V.G. Honours, M.Sc.1985. Consultant and Executive Director (> 40 Transport & Railway projects). Teach Transport Planning, Railway Eng. & Applied Statistics & Eng. Systems for undergraduate, Faculty of Eng., Cairo Uni. DOS, Win., AutoCad, MSOffice. Organizing the 3rd CODATU-III Conference

Iam expert with health and safety practices

A Chartered member of Institution of Engineers (India), Project Management credential holder from PMI, USA and Post Graduate in Civil Engineering with specialization in Soil Mechanics and Foundation Engineering with over 21 years of professional experience in infrastructure projects including constr

Civil and Structure AutoCAD Draughtman with 17 years experiance

Materials, Warehouse, Asset, Logistics Management

Formally Educated in Architecture, Construction studies & Computer Aided Design. Programmes: Auto Cad versions R14 to 2008, Architectural Desktop, Micro GDS, 3D Viz, 3D Studio MAX 2009, Photoshop CS3. Green Building Council Australia Accredited Professional. Small Business owner.

Providing detailed site identification information with the understanding of the technical, engineering and criteria determined by the client.

Hard dollar Mechanical Estimator/Project Manager experienced with Estimation and Quick Pen seeks West Coast Position.

BS Business Administration Major in Accounting graduate and presently a Materials Management Manager

SAP Procurement

The maintenance of comprehensive accident and dangerous occurrence statistics for the Project

Responsible for all accounting activities from trial balance to financial statement and balance sheets and financial report from time to time, supervision & control of financial, cost & management accounts of the company up to finalization

elevator systems installation

Results-oriented Mechanical Engineer with strong analytical and effective interpersonal skills. Corporate site and office experience in all facets of Engineering at design/build, manufacturing, consulting and telecommunications companies in Canada, USA and Europe.

To obtain a position that will utilize my organizational development skills and Human Resource experience to create a functional support system for management and staff.

I have been an HSE Supervisor for the past twenty (20) years for local and overseas. All inquiries have been incorporated in my own curriculum vitae.

Worked with the government as Fireman and Fire Safety Inspector

Procurement Engineer with 15 years experience in the field of Procurement / Materials Management for Oil / Gas / Power / Petroleum Refining seeking a mid level managerial assignment to contribute in achieving organizational goals and targets.

Graduated BS of Architecture-Cebu Institute of Technology-Philippines.Have 7-year work experience various fields like arch'l,struc'l,mech'l & elec'l,sanitary & likes. It involves site visits,dealing w/ clients,contractors & design works. I'm outgoing,quick-paced,focused & have excellent work ethic

Construction Manager seeks position in Caribbean. Experienced in capital project management and construction management.

Position as Safety Supervisor to achieve ZERO ACCIDENT goal of the company to serve,I have a total of 22 years of work experience 15 years in Indian Navy and 07 years in Oil, Gas, Petrochemicals and Construction field in Gulf and India.

I am a competent human resources specilist with more than five years experience and possess BSc Human Resource Development

mechnical welding and NDT inspector

Business Development/Sales Professional

mapping

To actively contribute to the development and growth of the organization where my analytical, techanical skill and knowledge could be utilized to the optimum extent and eventually facilitate my self in attaining professional excellence.

A highly gifted and enthusiastic geoscientist with experience in field work, identifying sedimentary facies from core material and well logs, diagenesis in siliciclastic rocks, sequence stratigraphy and stratigraphic correlations and conducting geological surveys

A strong technical background is complemented by practical financial, managerial, commercial, and communications experience developed in worldwide assignments.

Have more than 10 years working i construction firm in Singapore as a M&E trades

Qualification : M.Sc. Geoinformatics , Skills: AutoCAD2008,ESRI’s Arc View 3.2a,ESRI’s Arc GIS-Arc Map 9.2,,ERDAS Imagine 9.1,ENVI ( Environmental Visualizing Image )

Preparation of Techno-Commercial Proposal for various LSTK Projects like, Refineries, Petro-Chemical Companies, Steel Plants, Power Plants, Oil Bulk Plants, Gas Plants, Substations, Cable Laying, Plant Utilities and Various Industrial Projects.

4 years working as storekeeper in Gulf countries. I am now currently employed in Butec- Qatar as storekeeper. I handled 5 sites in the project. I usually maintain and monitor of stocks, making receiving and purchase request in the system and issuing materials.

Seeking an Interesting and challenging position in Safety

Safety or hse officer,4.5yrs exp

Experience in all phases of material management & expediting, design office & engineering & project coordination. Experience in heavy construction including offshore oil platforms & related facilities, nuclear fuelled power plants, paper mill, chemical plant & overseas military facilities.

I am currently on another project but can leave with a two week notice.

Permanent (long term) employment in the construction industry. Equipment Manager or Master Mechanic position.

Architecture CAD Drafter

The above given details are true to best of my knowledge & if any wrong I agree to do your needful.

[ 1 ] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

Seach Parameters


Change search parameters...
CATEGORIES: Other; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out