Resume - 4 years experinece in electronincs and electrical related works and in embedded...

Misco Jobs

Resume #85473

CONTACT INFORMATION:
View contact information...

OBJECTIVE:
To attain a responsible and a challenging position where I can exploit my knowledge and technical skills, that encourage continuous learning and creativity, providing exposure to new ideas, which stimulates professional and personal growth.

EXPERIENCE DETAILS:

ƒå Professional experience of 4 years in Embedded Systems Design & Development and Testing.
* 2 years of Experience in Embedded System design and Development.
* One year Experience in Verification and Validation in the Medical Devices.
* One plus years of Experience in Software testing in avionics domain.

AREAS OF EXPERTISE:

* Design and development of Embedded Systems.
* Good experience in Firmware Development.
* Good Working experience in 8-bit and 16-bit microcontroller architecture.
* Good working knowledge in serial communication protocols like I2C, SPI, UART, RS232, and RS485.
* Good Experience in C / Assembly Language programming.
* Very good knowledge in the analytical of Electrical Hardware Circuit.
* Electrical DFMEA (Design Failure Mode Effective Analysis).
* Experience Verification and Validation of the Medical devices.
* Good knowledge in writing test strategy and developing protocol.
* Well understanding of the medical standards like ISO: 13485 and FDA guidelines.
* Good knowledge of the Compliance Testing.
* Working experience in EMC/EMI.
* Development of test cases Using RTRT for avionics software.
* Good knowledge in the DO-178B
* Development of Low Level Requirement.
* Experience in the DOORS, Dimensions and PVCS.

DOMAIN EXPERIENCE:

ƒå Medical Devices.
ƒå Aviation.
ƒå Industrial Automation.

WORKING EXPERIENCE:

Organization Designation Duration
HCL Technologies Chennai Project Engineer 23 Apr 2007 -till date
Integrated Process Automation (IPA) Pvt. Ltd. Bangalore. R&D Engineer July 2006 ¡V March2007
Adpro Automation Pvt. Ltd. Bangalore. R&D Engineer Aug 2005- June 2006

EDUCATIONAL QUALIFICATION:

M. Sc. Applied Electronics (Bharathiar University).
B Sc. Electronics (Calicut University).

PERSONAL DETAILS:

NAME: SAJITH B
DOB: 27-April-1977
Contact Details.: psajithb27@gmail.com,
Mobile: +91-9884446398.

PROJECTS:

Medical Projects:

Description of the Project1: [Cryo Balloon Ablation System]. The CBAS-console consists of five major sections Industrial PC, RTSE circuit, Pre-Cool circuit, Vacuum Pump section, Power Distribution section. The Industrial PC provides the GUI during the console operation. The RTSE circuit receives the command from industrial PC and performs controlling and sequencing of all actions that are involved in controlling the flow of N2O to the balloon catheter. The pressure and temperature signals from various points of the N2O flow path are received and processed by the RTSE circuit.
The Pre-cool circuit is used to maintain the cryogenic temperature (-30 deg C) before entering in to the catheter. The vacuum pump is used to maintain a predefined value of vacuum during various states of the Console operation. The console receives the inner/outer balloon pressure and inner balloon temperature through the catheter board electronics. The communication between Console and the catheter board electronics happens through serial interface. The console is powered with universal AC input and all the electronics in the console is powered by medical grade power supply.

Description of the Project2: [Selective Neural Stimulation]. The SNS technology is a neuro-stimulation battery operated device, which transmits a controlled waveform designed to stimulate specific nerves. This SNS waveform is composed of a carrier signal and a pulse envelope. The carrier waveform is designed to be of sufficient frequency to overcome tissue impedances. The pulse envelope contains specific pulse width, amplitude and shape information designed to stimulate specific nerves. SNS can be used to treat a medical disease condition called overactive bladder.
The stimulation device in its final patch form is placed on the skin for a period of up to seven days. The user can adjust the patch waveform parameters through an optical link via a handheld controller. In addition, the controller can be connected to a PC via a hard wired serial link. The hard wired serial link can be used to upload data stored on the controller and allows a wider range of parameter adjustment for patch unit.

Responsibilities:
1. Requirements Study and analysis
2. Verification Plan development
3. Development Test Strategy and Protocols
4. Dry Run execution.
5. Testing.
6. Development Board Test protocol Project2 (SNS)..
7. Development of DFMEA for Project2 (SNS).

Aviation Projects:

Description of the Project 1: It is a requirement based testing. SCOE (Software Common Operating Environment) is an ARINC-653 compliant system to manage all the operations in airborne equipments. SCOE Software is a Level A software that needs to adhere to all the stringent objectives defined in DO178B standards. As per DO-178B Structural coverage is mandatory for Level A software. The objective of this analysis is to show 100% coverage in terms of statement coverage, decision coverage and MCDC. If there is any lack of coverage then justification is provided. In addition to that unit testing is also done. Structural coverage is performed to ensure that there are no dead code and unreachable code. Unit testing is performed to ensure that the written software adheres to the low level requirement.

Responsibilities:

1. Requirement Study and analysis
2. Test case development as per DO-178B
3. Automation of test cases
4. Run the test cases by using RTRT Tool, Simics simulator and On Target

Description of the Project2: Smiths_Scoe-LLR_Gen project for development of Low Level Requirements for the features File System, AFDX and HMEvent Interface modules in the SCOE (Software Common Operating System Environment).

Responsibilities:

1. Requirement Study and analysis.
2. Generation of low level requirements for SCOE.

Industrial Automation Projects:

Description of the Project 1 (Belt scale): Belt conveyors are accepted means of moving bulk materials in mining and process industries. With the advent of this fast mode of transportation, accounting the quantity of material transferred assumes great importance. Belt scales are the most reliable index of material accounting and can be measured directly and precisely, which offer accurate weighing systems to maintain higher accuracy and better accountability in the process. the systems employs a weighing frame with two or four load cells to sense the material load on the belt, a tacho generator to measure the belt speed.

Description of the Project 2 (Ethylene Oxide & Carbon dioxide filling Machine): This project is developed for Pest Control (India) Pvt Ltd, Mumbai, for filling liquefied EO & CO2 in different size of cylinders. It consists of one platform mounted over load cells controlled and monitored by the processor and display unit. Operator can enter the set value and other accuracy limiting parameters through keyboard. Once the operation started the set quantities of EO & CO2 will be filled in the cylinder. System is interfaced with a printer which is placed in a remote location through RS485, so that after each operation, required parameters will be printed out automatically along with current time and date.

Description of the Project 3 (Hopper Weighing System): Description of the Project: The hopper weighing system developed with four set points. The system would always monitor the weight on the hopper, if each set point is achieved corresponding output is activated there by the material flow was controlled The system was designed to be used ADC 7730 which is SPI compatible. The system includes max7219 display driver IC, additional memory, D/A Converter AD420 and the system has an expansion

Platform Used 8051 family IC's
Language Used C (Keil Cross compiler)

Responsibilities:
1. Requirement Study and analysis
2. Designing and Development Hardware section.
3. Software development for the Firmware and Display.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 551 to 600 of 822)

Go to Search Parameters...

Brief Description

Master Mariner and have experience as Senior Officer on LPG Carriers

Auto CAD Operator & 1 Year Working Experience in Auto Plant (specialized software of piping)

! have 23 years in the oil and gas industry with the last 10 in the pipeline control room. Handling 10000 miles of pipeline reciepts and deliveries.

Geotechnical, Geological Exploration, Resevoir geologist

I am interested in employment for any position where I may acquire new skills or my current skills may be fully utilized. I have experience in Crush and Convey, Leaching, Haulage, Safety and Environmental areas. Upon my employment I will bring a safe and positive work ethic to your company.

I am confident that my training and experience in the area of safety and health as well as international teaching and program development skills would benefit a company that is seeking to excel in this area.

I am an engineering graduate and i've been working as a material controller in a reputable company in qatar for two years. i am looking forward for a career growth and gain more experience. I am willing to accept any jobs which i am qualified of and my experience is necessary.

This letter is to express my interest in applying for an oil rig job. I have an Irish national craft certificate and over 7 years experience as an electrician. Ideally I would like to gain employment within my trade as an electrician, however I am willing to start at the bottom and work my way up wi

Free! In excess of 15 years Health and Safety experience. Strong coaching. Leadership skills and experience in BBS. Experience includes large 3D programs in all types of terrain including mountains, Arctic, and cold weather conditions.

Draughtsman - Piping / Architectural / Civil. with extensive number of years experience

Extensive working experience in Chemical Processing, Power Generation and Oil & Gas Industries. Versatile team player with an ability to incorporate new concepts and interact with all levels of professionals. Expertise in Project, Maintenance, Materials Management and ERP (SAP, MAXIMO, Primavera R3)

Highly qualified HSE Contractor looking for overseas positions.

Environmental Consultant (Engineer/Scientist)/Geoscientist

I am a Survey Engineer, experienced in multi disciplinary projects, with a good track record of world class projects. I am highly interested in any position with international or overseas exposures and possibility to maximize skills in Surveying, Management, acquire new ones and progress.

Dear Sir, I am a highly motivated person who works hard to accomplish my vision for the Future. The success of your company fits perfectly within my vision, and I firmly Believe I possess the tools to help your company thrive. In my most recent experience, I took on a leadership position a

With over three years of experience in commercial and highway projects, I have developed a strong background in planning and designing; consequently, I have developed effective quantitative and drafting skills in AutoCAD 2D &3D and MicroStation/GEOPAK, Inroads, TransCAD, LDD and also planning skills

pdms 3d cad autocad cadworx sr designer mechanical drafter field engineer walkdown

Professional Objective: To continue working as a Quality Assurance, Construction Representative, Pipeline Welding Inspector, Non Destructive Testing Inspector, Radiographic Interpreter, for a major proactive organization.

Journeyman Heavy Equipment Operator/Foreman 10 yrs exp.

Livelink Administrator, Causeway Collboration Administrator

PARAMEDIC(ADVANCED LIFE SUPPORT)/FIREFIGHTER/ EMT RESCUE TECHNICIAN

Mining underground mucking hauling bolting and screening leading shotcreating and construction

Responsible of Logistic, Warehouse, Purchase for Inter. Infrastructure Works Contractors

15 years of proven experience in business development for technical service providers. Expertise in engineering/consulting, construction, environmental, oil & gas. Managed sales and operations regionally and nationally.

Camp, facilities, catering Management

i am having 13 years of experience in condition monitoring and in plant inspection includes vibration, vibration analysis, balancing, ndt, coating & corrosion and welding inspection.

Electrical Engineer

Have a 2 busy season experience at mining industry

I have over eight years experience within the recruitment market both in Australia and within South East Asia. I have acquired a wealth of experience servicing some of Australia’s largest mining, energy and construction organisations and have developed extensive skills in recruitment and HR.

Quality Control Senior Chemist

4 years experinece in electronincs and electrical related works and in embeddeded sytems

HUMAN RESOURCE PLANNING, ADMINISTRATION, RECRUITMENT & SELECTION, ORIENTATION, TRAINING & DEVELOPMENT, PERFORMANCE MANAGEMENT & EMPLOYEE RELATION MANAGEMENT

HR Professional seeking Middle / Senior Management Position

More than two years of experience in inspection works as a QA/QC Welding Inspector. Extensive experience gained in major onshore/offshore oil and gas construction projects, covering all methods of structural and piping fabrication, erection and inspection (Modules, CPP Decks/Topsides, Jacket & LQ).

young and energetic graduate with professional experience in Land Surveying

All activities relating to Electrical Construction projects such as installation & commissioning of Electrical equipments namely generator, Transformer, HT. LT panel, Laying of power, Lighting cables & Lighting Fitting

Planning/Schedule Engineer,Maximo IMplementor,

Safety Officer / Safety Supervisor / Safety Advisor

Corporate Finance, Program Management, Management Consulting, Audit, Accounting, Business advisory services

Crane Driver, Rigger, Scaffolder, Dogman, Multi-skilled operator, Shutdown & Construction experienced.

Projects Management / Technology Consultant / Business Development & Management of Information Systems

Good analytical mind, good communication skill, result oriented and team player.

Having Cement and Pharma R&D Experiences, I would like aquire a career in the same feild. My Skills includes that,I can work with part of team or indepentantelly. Fast decision making, analytical skill.

Possess a background in Security including BS Justice Studies, US Military, Federal Law Enforcement, and Int'l Security Mgmt experience.

a young engineer who has versatile knowledge in mechanical engineering , marine engineering and electrical wiring/installation(domestic and industrial)

Mechanical Piping Engineer/ Autocad Engineer

Project Controls/Sr.Planning/Project Engineer

12+ years of experience/education in Logistics/Transportation Management

Skills: electronics mech (technician) S.M.t component repairing and touch up through whole component assemble, soldering work and production supervision , testing of electronics tuner with the help of oscilloscope, fault finding etc Qualification: Under Graduate and 2 year diploma in electronics

First Aid Attendant and Field Supervisor Familiar with drilling rig and service rig operations. Able to do minor mechanical, plumbing and electrical work. Have some hours experience on a variety of machinery. Have proven abilities in first aid. Have proven leadership skills.

1 2 3 4 5 6 7 8 9 10 11 [ 12 ] 13 14 15 16 17

Seach Parameters


Change search parameters...
CATEGORIES: Other; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out