Resume - Senior level treasury generalist with 20 years of experience in the treasury dep...

Misco Jobs

Resume #10404

CONTACT INFORMATION:
View contact information...

QUALIFICATIONS SUMMARY
Senior level treasury generalist with 20 years of experience in the treasury department of three Fortune 500 companies. Successful track record of transitioning treasury departments following acquisitions.

Experience in:
* Domestic and international cash management
* Foreign exchange
* Interest rate hedging
* Letters of credit
* Bank debt
* Debentures
* Pension Investments
* Investor relations

PROFESSIONAL EXPERIENCE
Transocean Inc., Houston, Texas
1997-2003
($2.5 billion international oilfield services company. Acquired two offshore drilling companies—R&B Falcon Corporation in 2001 and Sedco Forex in 1999.)

Assistant Treasurer (1997-2003)
Managed treasury function, including global cash management activities, bank selection and implementation of services and foreign exchange activity, including hedging of contract exposures and funding of foreign operations. Negotiated debt financings. Created and implemented investment policy guidelines for corporate cash portfolio. Reported performance of pension plan investments to senior management. Managed six employees.

* Lowered interest costs by $5.5 million on an NPV basis for a joint venture by refinancing a $238 million synthetic lease for construction of a deepwater rig.
* Eliminated restrictive indenture provisions and lowered interest costs by retiring four high-yield debt issues by issuing $700 million 6.625% notes, $600 million 7.5% notes and $400 million 1.5% convertible debentures.
* Financed rig construction program by issuing $865 million 2.75% zero coupon convertible debentures.
* Negotiated a $400 million term loan facility to finance an acquisition in December 1999.
* Lowered interest costs by approximately $45 million over six quarters by executing $700 million of floating interest rate swaps on the 6.625% notes due April 2011.
* Consolidated the company's U.S. cash management activities with a credit bank through implementation of Wells Fargo's PC Manager cash management system.
* Increased corporate control of field cash by integrating the U.S. Dollar cash management program of Sedco Forex through implementation of the Chase Insight system and Citrix software.
* Integrated the U.S. cash management program of an acquisition and established a separate cash management program for a subsidiary that was eventually taken public in an IPO.
* Lowered interest costs on short-term borrowings by implementing an $800 million A2/P2 commercial paper program with four dealers.
* Arranged $100 million of bank facilities for issuance of standby letters of credit to support the company's contract bidding activities.

Director Of Treasury (Six months in 1997 prior to promotion to Assistant Treasurer)
Managed insurance function. Handled property damage claims and injury claims. Managed one employee.

* Obtained delay-in-delivery coverage for a $450 million rig under construction in order to receive contract profit margin if construction was delayed beyond a certain date.

Sterling Chemicals, Inc., Houston, Texas
1987 - 1997
($1 billion international chemical manufacturing company. Acquired by a private investor group in 1996. Acquired a pulp chemicals business in 1992.)

Manager of Investor Relations And Treasury Analysis (1992-1997)
Managed investor relations—created investor presentations, annual and quarterly reports and press releases, managed quarterly earnings conference calls and served as the primary investor contact person. Negotiated debt financings, including a $60 million term loan for a new plant. Performed oversight of pension plan investments.

* Managed the proxy solicitation process, including the proxy solicitor and the exchange agent, which resulted in 75% shareholder approval of the merger transaction with a private investor group.
* Arranged $456.5 million of bank facilities to acquire 91% of Sterling's outstanding common stock in a merger transaction with a private investor group.
* Lowered borrowing margins and revolver commitment fees and consolidated two debt facilities by negotiating $275 million of new bank facilities.
* Improved investment performance by restructuring the investment management of the defined benefit plans, the 401-K plan, and the non-company stock portion of the employee stock ownership plan.

Manager Of Cash, Credit And Investor Relations (1989-1992)
Managed treasury operations—established a new cash management program for an acquisition. Supervised credit function—negotiated commercial letters of credit. Managed investor relations function. Managed two employees.

* Negotiated $185 million of bank facilities to acquire a Canadian chemicals business of which $165 million was non-recourse to the parent company.
* Fixed interest borrowing costs during a period of low cash flow by hedging a portion of floating-rate revolver debt through execution of fixed interest rate swaps.
* Minimized the effect of Canadian dollar currency fluctuations through a forward contract hedging program.

Manager Of Debt And Investment (1987-1989)
Managed reporting requirements under debt agreements, negotiated amendments to debt agreements and coordinated debt repayments.

* Lowered borrowing margins, released collateral and permitted the payment of $180 million in extraordinary dividends to shareholders by renegotiating the company's revolving credit agreement.
* Improved the compliance reporting system for the debt agreements by correcting reporting errors to lenders which resulted in the elimination of audit comments from the independent auditors.

Anderson, Clayton & Co., Houston, Texas
1983-1987
($2 billion international food manufacturing company. Acquired by The Quaker Oats Company in October 1986.)

FINANCIAL ANALYST (1983-1987)
Evaluated investment alternatives for the company's corporate cash portfolio. Created management reports about investment performance of corporate cash portfolio and pension plans. Supported senior management in negotiation of debt agreements, including $255 million of bank facilities to purchase a portion of common stock in an attempt to keep the company independent. Secured $600 million in collateral for a bank financing.

ACADEMIC QUALIFICATIONS
M.S., Finance
Texas A&M University
College Station, TX
1983

B.B.A., Management
Texas A&M University
College Station, TX
1980

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 3451 to 3500 of 4814)

Go to Search Parameters...

Brief Description

Workshop / Fleet manager over 20 years experience

Technical Summary: More than twelve years of High-Tech manufacturing procurement under Department of Defense Contracts in compliance with C.C.A.S., FAR / DFAR Regulations and I.T.A.R.

Free! Over 10 years Project Management, Engineering and Construction experience, Confident using Autocad, sketch-up, Microsoft office and Coreldraw to complete projects successfully , Skilled in drafting and preparation of shop drawings , A hardworking individual that enjoys new challenges , Can offer sal

I am a Red Seal certified Heavy Duty Mechanic. For the past ten years I have been employed with Douglas Lake Equipment first as Field Service Technician then moving up to Parts and Service manager.

Chemical engineer with 17 years petrochemical work experience with experienece in Oracle VB6 , AutoLISP

Nanagement engineer power utilities oil gas construction

Regional Manager for GSM site construction, Registered Civil Engineer, AutoCADD detail supervisor

Mapping Draftsman, Cartographer, CAD Operator, Survey Draftperson, Mapping, Draftsman, GIS Technician, GIS Operator

Knowledgeable in all aspects of capital projects including but not limited to the planning phase, progress and cost tracking, material requisitioning, project reporting, project documentation, and scheduling. Proficient in analyzing cost trends and variances for clarification or correction.

Provide technical expertise, guidance and leadership for a variety of designated engineering projects at site.

SENIOR PLANNING ENGINEER (OIL & GAS)

Results-Driven Leader/Senior Executive, BS/MS/PhD work ChE, MBA, PE, 25+ years experience

Heavy Equipment / Crane Mechanic / Welder

Mechanic; Hydraulic Tech; Crane Operator - Mechanic; Detroit & Allisson Transmission Mechanic

Basic operational skills of the track hoe including safety procedures. Use of the engineer's level. Measurement of cross slope embankment and trench grade line using steel tape and level. Reading and understanding blueprints. Additional training on the backhoe and bulldozer.

Application for Heavy Equipment operator and mechanics.

I have a good experience in Plant Modelling using PDMS and knowledge about Pressure Parts & piping Stress Analysis.By majoring in PDMS, I have been exposed to ADMIN, DESIGN, PARAGON, SPECON, DRAFT AND ISODRAFT Modules. And, Iam also involved in creating 4D simulation and presenting of pro

Senior level treasury generalist with 20 years of experience in the treasury department of three Fortune 500 companies. Successful track record of transitioning treasury departments following acquisitions.

Maintenance, water purification, reverse osmosis, materials, logistics, management

Worked experience of 4 yrs. in the field of EIA and EMP for various infrastructure and construction projects including world bank funded projects.

CAD/CAM engineering

I have 18 years experience in the oil field on drill rigs also have 10 years experience as caterpillar mechanic I have computer, construction,electrical,plumbing skills and I am very safety minded

I have Excellent technical, communication and interpersonal skills with very good troubleshooting and problem solving skills and ability to work on multiple tasks in a fast paced environment independently and in a team. I can strive to make things work more efficiently and effectively .

12 years of experience on Intergraph EDMS/CAD System, specially PDS & Smart Plant products administration; at present working as EDMS Engineer in Sabic, Saudi Arabia since April-2001. I am going to be released by end of 2007; please find my CV attached herewith.

Instrument Engineer (Construction) , Site Engineer (Instrumentation), Field Construction Engineer (Instrumentation), 05+ Years Exp., Engineerind Degree in Electronics & Instrumentation

Electrician - Certified

Captain looking for a challanging position shore based as Marine/HSE Superintendent- Manager. I am an unlimited Master Mariner and I have recently achieved a MSc in Marine Operations and Safety Management.

Welder or Welder Supervisor

80 Hour Certification, 10+Years experience Construction, Light Mechanical Experience, 8+ Years Heavy Equipment Experience

Entry level electrical engineer resume

In response to this, please consider my PROJECT BASED resume for Instrumentation positions pertaining to your need.

Trade Qualified Boilermaker(Heavy Fabrication) 10years Exp, Proficent at MMAW, GMAW, FCAW welding process, Air-Arc Gouing. Tickets include: Forklift, Working at Heights, EWP.

I am a Senior Process Engineer in oil & gas systems. Along my 18 years experience in the field, I have held a number of positions going form operation to project execution and management and process engineering activities. I am fluent in English, French and Arabic.

I am Electronics and Communication graduate and presently working in Saudi Arabia

Of late brilliantly completed the scheduled Training in Calibration, Testing and Conformity Assessment from RTC(ER), Govt. of India

I am a young ,dynamic, smart having a good percentage degree of production engineer.

I am Civil Engineering graduate and having three years experience in the construction field.

I have a three years experience as an auto electrician and heavy equipment mechanic for Trident Transport Company in Abu Dhabi. I am looking for same kind of job in Abu Dhabi or in Europe, like Netherlands, Belgium or Germany.

Have sound understanding in Geology. Graduate in Geology. Doing Post Graduation(final year) in Geology. Done field work. Computer-friendly.

I am a heavy equipment specialist. I repair all types of earthmoving equipment. My strong suit is welding and fabrication.

I have extensive experience in various disciplines associated with electronics. For the past two and a half years I have been employed on a semi-submersible drilling rig. In this position I worked with various PLC controls, level controls, Seimens Step5 and Step7 control trees.

Progressively Responsible of a range of Purchasing/Warehousing Management, Organization & Administration positions with worldwide procurement (national & international); Contribution and Direct Involvement in all previous jobs with regards to purchasing of spare parts and materials required for all

Logistics, Procurement and Materials Manager (Supply chain)

A solid background in project controls, project coordination, project scheduling, and records management with over twelve years combined experience in these areas.

Procurement Manager with over 15years Multidisciplinary experience, providing Managerial, Engineering, Information Technology for onshore/offshore rigs and office operations in Procurement, Warehousing and Logistics.

I am working as a Mechanical/HSE Engineer in ADCOP (Abu Dhabi Crude Oil Pipe line Project) in Abu Dhabi, UAE. I have also got the training in Oil and Gas processing Plant for three months and also worked as a maintenance and sales engineer in SATAKE Corporation, JAPAN Pvt. Ltd.

Heavy Equipment Operator: Operated Heavy Equipment in a safe and effective manner in order to minimize the risk of injury, property damage or loss of life.

A project management and business development professional with extensive experience in bid management through to contractual completion. An impressive record in winning new business, and managing and completing projects on time and under budget.

Mechanical Engineering Diploma holder with BGAS Painting Inspector Grade 2 Certification, working in Saudi Arabia-(Saudi Aramco contractor) as a Painting Inspector in pipeline construction field (Gas Wells, Manifolds, Trunk lines, GOSP & Gas Plants, etc).

Contracts & Global Procurement Manager, Change Agent, Systems Initiation, Strategic Sourcing, Seasoned Negotiator, Proven Organizational & Team Leadership, Collaborative Mgmt. Style, Broad knowledge of OEMs & Suppliers, Contractor Oversight, Systems & Procedures, Middle East Mega-Project Experience.

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 [ 70 ] 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out