Resume - A qualified Deep Sea Captain (Master Mariner) with 15+ years Offshore:

Misco Jobs

Resume #11019

CONTACT INFORMATION:
View contact information...

QUALIFICATIONS:
Master Mariner(FG) - Deep Sea Captain unlimited
Barge Master (Jack-Up ; Construction Barges ; SEMISUB)
Dynamic Positioning Operator, Ship Security Officer

CAREER SUMMARY:
A qualified Deep Sea Captain with 6-year College & Maritime education and over 15 years sea-going Offshore experience, specializing in the:
-Jack-Up Platform (Drilling/Coring)
-Heavy-Lift Construction//Offshore Installation//Platform Removal//Pile Driving.
-Dynamic Positioning: Diving(saturation), Wreck Removal, ROV trenching/Buarial,
Coring, Construction, Umbilical/Cable Lay, PLIB, PLGO, CPT Tests
-SEMISUBmersible Heavy-Lift Barges.
-Survey, Towages, Supply Service, Salvage Station.

APPOINTMENTS:
May.2004 - July2004 Combifloat // FUGRO Engineering Services Ltd
Position Held: Barge MASTER on Jack-Up platform "FES-1" (4-legged self-elevating platform with 30'' spuds).
Jobs performed:-Drilling (Geotechnical survey for Wind Farm development) Offshore UK
-CPT for the above.
Duties covered: -Supervised all Jack-Up manoeuvres (change location every 1-2 days).
Acted as Rig Mover (planning & executing Rig-moves).
Responsible for Jacking up/down on work location & Preloading procedure;
-Supervised tug-related operations with the Jack-Up, Safety Towing;
-Responsible for the maintenance of the Jack-Up Stability (during Jacking operatrions & Drilling) to ensure compliance statutory Stability criterias;
-In charge of PTW system; Complying with ISM & HSE requirements, Company's safety policy.

Nov.2003-Mar.2004 "CHORNOMORNAFTOGAZ",
Position Held: Barge MASTER on the self-propelled construction Barge "NEPTUNE-3"
(4-points mooring, Crane-150t., Deck Area 15x15m; Full load Displ.2105t.).
Jobs performed:-Offshore Construction on the Black Sea fields;
-Salvage ; Heavy-lift service & Civil projects within the Black Sea.
Duties covered: -Responsible for setting up the Barge on work location; acted as Barge Mover;
-Monitored all Barge mooring requirements concerning to Barge movement relating to Offshore structures/platforms;
-Supervised anchor handling operations for the Barge;
-Drawing anchor patterns for marine spreads.
-Supervise all Crane operations as per Company's Lifting policy;
-Responsible for the maintenance of Barge Stability (during Crane/Heavy-Lift operations) with reference to Stability, trim, stress, bending moments, to ensure compliance statutory
Stability criteria;
-In charge of executing the work as per the approved work procedures & drawings, Liaise with Field Engineer/contractors;

Mar.2001-May 2003 EDT Towage &Salvage Company Ltd Position Held: Chief Officer on DP2 Dive support, Construction vessel "EDT ARES" equipped with ALSTOM CEGELEC DPS 902 Duplex Dynamic Positioning.
Reference systems: 2 DGPS ("SERCEL NR 203" and "RACAL SkyFix" +SPOTBEAM)
Inmarsat B or M differential receiption; SONARDYNE Acoustic system USBL ; TAUT Wire 500m.
Jobs performed on DP: - Saturation Diving, Recovering heavy oil from sunken bunkering barge "Spabunker 4" and Wreck Removal of the barge for TITAN Maritime (USA) in Gibraltar Bay;
-Saturation Diving for COPAREX (repairing FPSO's riser, turret, pipelines) Offshore Tunisia;
-Underwater works for TyCom in the Celtic Sea;
-Repairing fibre-optical cable & ROV trenching (using FLEXJET) for ENITEL, Offshore Norway ;
-Post Lay Inspection Buarial (using FLEXJET) in North Sea for Sonsub;
-Umbilical Lay project for SAIPEM under the contract with Sonsub in Adriatic;
-ROV support = Deployment of scientific Med-Goos buoy and a deep-water equipment for HARRIS Corp.USA in the Mediterranean Sea;
-Cone Penetration & DropCore Tests for FUGRO, offshore Israel.

Dec.2000-Mar.2001 UK RSPETSEXPORT
Position Held: Barge MASTER on SEMISUB Heavy-Lift Dock-type manned transportation Barge "TP-400" (5053t. Displacement)
Jobs performed: Semisubmersible transportation service of Floating Heavy-Lift cargoes within Mediterranean & Black Seas.
Duties covered: -Supervised all Ballasting/de-Ballasting operations, getting the Barge submerged;
-In charge of the whole process of getting Floating Heavy-lift Cargo on board and secured as per approved loading procedures & drawings;
-Supervise getting the Barge in tow;
-Responsible for maintenance of Barge's Stability (during Submersion/Emergence & while in tow) to ensure compliance with statutory stability criteria a/p Stability documentations;

Feb.2000-Aug.2000 YASCO company
Position Held: Relieving MASTER on Floating Crane "FC-87" (100t.lifting capacity)
Jobs performed within BlackSea: lifting service; civil projects; harbour-deepening grab operations.
Duties covered: -Supervise Crane operations as per Company Lifting policy;
- Responsible for the maintenance of the Barge Stability (during Crane/Heavy-Lift ops) with reference to Stability, trim, stress, bending moments, to ensure compliance statutory
Stability criteria;
-Responsible for setting-up/mooring the Barge on work location; Acted as Barge Mover;
-In charge of executing the work as per approved work procedures & drawings;

Apr.1999-Aug.1999 SMIT International Singapore
Position Held: Chief Officer on the AHTS "SMIT LLOYD 111" (8000 bhp)
Jobs performed:
-towages of Dry Dock and different manned Offshore barges, units;
-salvage station at Andaman island;
- support to a Wreck Removal operation on Ganges river.

Jul.1998-Oct.1998 TIDEWATER Marine Int'l
Position Held: Chief Mate on the AHTS "PETROLANE SEAHORSE" (5000 bhp)
Jobs performed in W. Africa: for "MOBIL"- supply work for semisub.rig, FPSO, jack-up rig. for"OCEANEERING"- diving support (shallow water air diving).

Jan 1996-Feb 1998 WALLEM Shipmanagement Ltd
Position Held: 2-d Cargo Officer on General Dry Cargo carrier "KUBBAR"
23618t.DWT, strengthened for Heavy-Lift (100t.derrick).
Worldwide navigating. Type of cargo: H-lift cargo, General Cargo, Containers.

May 1992-Dec.1992 SEA CORAL Maritime Services
Position Held: 2-d Officer on the bulk/log carrier "REGENT"
Worldwide navigation; Type of cargo: Timber, Bulk cargo, General Cargo.

1987-1995 "CHERNOMORNEFTEGAZ"
Position Held: Cargo Officer on 8-points mooring Construction Barge "TITAN-2"
(600.t Crane, 19813 GRT, 140x54m, Deck Area 6500sq.m; catamaran hull;
8 points mooring, comprises operated from Bridge 8x10t.FlipperDelta anchors with 1500m of 51 mm wire.
The Catamaran is self-propelled (2 "AQUAMASTERS" + 2Bow Thrusters, all linked into a Joystick control.).
I was Responsible for Stability calculations and supervision of all the heavy-lift & crane operations, underwater lifting, pile driving); also I acted as Anchor Leader=Rig/Barge Mover.
Jobs performed:
- offshore installation and platform removal on the Black Sea fields & in the Persian Gulf;
- Wreck removal and Heavy-lift service in W. Africa (Conakry);
- Heavy-Lifting service & civil projects within the Black sea;
- Pile Driving (with 100t.steam hummer) for Platform Assembling & Pile Extraction.
Duties covered: -Supervise Crane operations as per Company Lifting policy;
- Responsible for the maintenance of the Barge Stability (during Crane/Heavy-Lift operations/Pile Driving) with reference to Stability, trim, stress, bending moments, to ensure compliance statutory Stability criteria;
- Assisted the Master in setting up the Barge on work location.
Acted as Anchor Leader/Barge Mover;
- Nominated deputy in supervision of anchor handling operations for the Barge;
- Drawing anchor patterns for marine spreads;

Oct.1993-Oct.94 subcontractor "CHERNOMORNEFTEGAZ", contractor "Marine Heavy-Lift Partners BV"
Participation in the Project of building the Bridge over the Great Belt(Denmark) where I gained experience of handling 24000t.DWT SEMISUBmersible barge "GIANT-2" while service as Cargo Officer on the AHTS "NEFTEGAZ-68" (7200 bhp)
Jobs performed: Ballasting/de-Ballasting of the Semisub.; towages (Baltic Sea, North Sea, Biscay); port handling of the semisub.
Duties covered:
-Supervised Ballasting/de-Ballasting operations, getting the Semisub submerged;
-Supervise the whole process of getting Floating Heavy-lift Cargo on board and secured as per the approved work procedures & drawings;
-Taking part in getting the Semisub in tow;
-Responsible for maintenance of Semisub's Stability (during Submersion/Emergence) to ensure compliance with statutory stability criteria a/p Stability documentations;

ONSHORE Employment: Periodically I have held an office job, substituting for Asst. Operational Manager of the CHERNOMORNEFTEGAZ-fleet (exploration+development of gas fields on Black Sea)
Responsibilities: The Administration & Management of the Company's Fleet & Maintenance Department (AHTSs, Accommodation Barge, H-Lift Construction vsl, Floating Dock) Covering Accounts, Spare Parts, Materials Purchasing, Dock-side Maintenance.
Responsible to Manager for coordination of Client services.

EDUCATION:
In August, 1981, I entered Odessa Higher Engineering Marine College (Navigation Faculty), which trained Merchant Marine Officers of senior rank and gave a 6-year University education.

In April, 1987, I graduated from the College with the Degree of Engineer-Navigator (an equivalent to the Degree of Bachelor of Engineering), Diploma IIB No.576516 (d.26.03.1987)

TRAINING COURSES: Various undertaken, including:
April 2002 Dynamic Positioning (Induction & Simulator) @ "The Dynamic Positioning Center" (London)
Certificates: Basic Course No.0289(d.05.04.2002), Advanced Course No.0298 (d.11.04.2002)

April 2002 I took the following courses @ Kyiv State Maritime Academy as per STCW-95:
- Refresher & Updating courses for Masters Certificate # 8 d.26.04.2002
-Ships Carrying Dangerous & Hazardous Cargoes Certificate #.D0012/02 d.16.04.02
-Radar Observation & Plotting simulator Certificate R0008/02 d.20.04.02
-Automatic Radar Plotting Aids simulator Certificate A0011/02 d.26.04.02
-Proficiency in Survival Craft Certificate S 0013/02 d.23.04.02
-Advanced Fire Fighting Certificate F 0010/02 d.22.04.02
-Personal Survival, Safety & Social Responsibilities Certificate PS 0007/02 d.02.04.02
-Medical Care on Board Ship Certificate MC 0060/02 d.19.03.02

June 2003 GMDSS GOC @ Kyiv State Marine Academy Certificate # 00324/2003/07 d.18.06.2003

May 2004 Ship Security Officer @ Sevastopol Maritime Training Centre Certificate # 00261/2004/05 d.07.05.2004

April 1985 Diving Courses at Odessa Navy Diving School Certificate # 373015 d.19.05.1985
1988-1991 I took a 3-year English language course, supervised by the Ministry of Education
Certificate No.2776 d.02.07.1990 and addendum No.640 d.04.12.1991

PERSONAL DATA:
Hobby:
1. mountaineering
2. volley-ball.(I have been going for volley-ball since the school, when I played for the school team.
Later on, while at the College, I played for the all-college team. Then, after graduation (by that time I got "1-st class volley-ball player"- the highest rank in amateur sport), I played for Chernomorsk district team and for Club "Inturist").

References: Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4451 to 4500 of 4814)

Go to Search Parameters...

Brief Description

Catering Management

20 years in the Navy I worked as a Supervisor/Quality Assurence/Electronics

Power plant engineer involved in a variety of power plant equipment design and commissioning.

Project Control, Corporate Treasury, ERP Application Consultants

QA/QC IN POWER, PIPE FITTER, STRUCTURAL FITTER, AND HEAVEY AND LIGHT EQUIPMENT OPERATOR

Six Sigma,Lean manufacturing practices,Capacity planning,Line balancing,Human Factors

Maintenance Manager/Supervisor - Direct hands-on experience in the start-up of a large hydroforming/manufacturing facility. Excel at directing a cohesive staff in the successful attainment of objectives. Major strengths in planning, problem solving and communication.

Buyer/Purchasing Administrator, Planner/Scheduler, Sub Contract/Coordinator

Around five years of experience in the field of heavy fabrication, planning, estimation, procurement, execution, QA/QC activities, designs and production for EPC projects.

Project Planning and Management, and Procurement / Purchasing

Human Resources, Project Management, Training, Engineering

With over 4 years experience in Quality Control & Assurance also in Inspection application & method. Demonstrated capability of technical expertise to ensure the quality of work accodance with Specification, code or standard, and to make sure the schedule of work on time.

I have a varied skill sets and expertise which puts me in a unique position to contribute enormously to a wide range of duties and activities- Ranging from Mechanical Engineering (projects and operations), to Project Management and Process Improvement

QA/QC Inspector cum Engineer

Process/Electronic Technician

MSc in Management Finance,BS(Hons) in Business Administration, ACCA, CAT

Early career Supply Chain Management & Project Management Graduate

Other than my recent employment my background includes but not limited to: 5+ years in drilling and work over rig experience, I’ve spent at least 1 or more years working or training in every position, 1 year as floor and motorman, 3 years as derrickman

I am a target oriented, highly motivated, hard working and communicative person, I have Leadership skill, I am speak English. In addition to the above qualification, I am also familiar with computer program and have the ability to work in team. I have an Experience In belt system maintenance and equ

I have over 27 yrs Elect/Inst experience on industrial and commercial projects throughout the US and Saudi Arabia.

I've worked the oilfields for a very long time off and on, I know pretty much everything there is to know, I'm a leader and do the best I can do

I am a civil engineer designer with a multi - disciplinary consultancy. I am involved in all aspects of delivering flood alleviation schemes including design of flood defences. I have a BEng(hons) from an accredited university and am finishing my MSc part - time. I also have 2 years of site exp.

Documentation Specialist

My experience in biological science ranges from working independently to working for, State, Federal Agencies and Environmental Companies. This experience has provided me with valuable skills in conducting field research, data collection and analysis on many threatened and endangered species.

A qualified Deep Sea Captain (Master Mariner) with 15+ years Offshore: - Jack-Up platform (as Barge Master, Rig Mover ) - DynamicPositioning (DP2 Dive/ROV) - Heavy-Lift Constrcution/Offshore Installation/Platform removal/Pile Driving - SEMISUBMERSIBLE Units (as Barge Master)

Graduate chemical engineer (The University of Queensland), hardworking, quick learner and eager to learn with excellent communication and project & time management skills.

Mechanical technician - rotating equipment, pumps, compressors, heat exchangers, gas, petrochemical industry, valves offshore survival BOSIET. Hazardous area

NDT

Am a hard working and reliable person who displays a high standard of care and customer service, a person who is highly active, self motivated, keen to succeed and eager to learn new skills. Am good team worker and I know how to prioritise my work.

Administration, Marketing, Business Development, Operations & Computers

Corrosion, Cathodic Protection, Quality Control, Metallurgy

HAZOP, Risk Assessment, EHS Training, Waste Management, EMS, OSHAS 18001

Graduate in chemical and electrochemical engineering one of the unique course offered by central electrochemical research institute in elecrochemical science , having professional expertise in various electrochemical area with CGP of 7.934 looking for a challenging career in reputed organisation .

Timed served Mechanic with safety certification and good leadership skills

Industrial Projects Management / Engineering Design,Purchase / Supply Chain Management.,Installation, Erection and Commissioning of Machinery,Business Development,Material Management.

Very good analytical and project management skill. Do multi tasking and road warrior.

BTech Electronics and Communication Engineer having 4 years experience in Operation and maintenance of Power Substation.Also have Post Graduate Diploma in Advanced Computing.Knowledge of PLC Programming and Applications and SCADA Programming and Applications.

Professional mechanical and project engineer, conduting the maintenance and projects within heavy industrial environment blingual, planning, ‎budget control, Reliability, RCM, PdM, PM‎

Mechanical Engineer (Recent Graduate)

Good analytical and communication skills. Can communicate fluently in both English and Tamil. Willing to learn and adapt to new challenges. Self-motivated, dynamic, quick learner and team player.

Instrument Engineer Mark V, Mark VIe, Siemens S7, Bently Nevada , CCC,CompeX.

Cost Engineering / Schedule development and control, Estimating, perfect computer knowledge (programming level). AACEI member. English, Russian, Japanese languages knowledge. 7 years of working experience. Degree in international business administration.

I have qualified N3 in 1998, I worked for Catterpillar and worked my self up to Service Manager, I've been a Group Plant manage, Currently working in the DRC on the Copperbelt as Maintenance Manager.

Motivated scientist looking to bring new and fresh ideas to current environmental projects.

Production Manager with BS in Mechanical Engineering and 8 years of experience in CNC Machine Shops, QC, QHSE, Planning, Inventory Control, Cost Control, Budgeting, ERP (Great Plains), Pro / E, AutoCAD. Good experience in factories start ups. CPIM (Certified in Production and Inventory Management).

I have completed CA - Inter and currently a Chartered Accountant - Finalist from Institute of Chartered Accountants of Pakistan. I am working with Ernst & Young Global Limited in Karachi office for the last 4 years and currently my designation is Senior Auditor.

Prepare MTO, BOM, electrical installation, electrical testing, E & I pre commisioning and commisioning

Over 08 years experience in IT/IS with around 04 years of expereince in JD Edwards implementaion in technical and funtional role, proficient in coordinating overall project execution to ensure inter-project dependencies are properly identified and managed, familiarity with Project Management methodo

B.E. Mechanical. Five plus years of experience in Project Management, Construction Management, Logistics, Budgeting, Cost Estimation, Materials Management, Resource Planning in Construction sector.

Senior project planner schedule with 12 years heavy industry and construction projects experience ,professional in using MS Project,Primavera P3&P5,MS office,CMMS systema like SAP R/3 , Maximo. Strong technical background , project management and cost control, contract and claim adminstration

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 [ 90 ] 91 92 93 94 95 96 97 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out