Resume - Project & Operations Engineer

Misco Jobs

Resume #11319

CONTACT INFORMATION:
View contact information...

EDUCATION
* B. Sc. Of Engineering-Electrical Power System Dept.
* Faculty of Engineering-Ain shams university-Cairo- Egypt– June 1999
* Graduation grades:
* Final year: V.Good-79%
* General grade: Good-73%

Graduation Project:
Electrical Power system planning and designing.
Design the network and its control and protection systems
Project grade: Excellent

* High School Diploma from Abu Dhabi Secondary School
* Abu Dhabi – U.A.E
* General Grade: 91% - June 1992

OBJECTIVE - To gain more experience through joining an organization with the faith of reaching a better career and position
- To make sufficient and productive use of my technical and professional skills in my field of study
- I have the ability to work under pressure and for a long time in a team and independently.
- Self motivated, good communication skills, able to work with different cultures and ready to be reallocated

PROFESSIONAL EXPERIENCE
* Current Job: Production Optimization Engineer.
* Hot Hed International - WeatherFord ALS.
* An international oilfield services company.
* From October 2003 till now
* Artificial Lift Systems (ESP, PCP and SRP)
* Job description:

* 1.Support Field service personnel with Technical support
* 2. Supervise Rig Site installation and testing.
* 3. Supervise a team of junior engineers.
* 4. Inspect and assemble ESP & PCP's, supervises and assists in the subsequent installation.

5. Set up surface equipment and insure system safety devices are installed and functioning. Start and monitor voltages, amperage, torque and production rates. Set operating parameters.

6. Pull and inspect ESP / PCP equipment, diagnose problems, make applicable field repairs.

7. Diagnose problems and recommend or implement appropriate solutions for surface problems.

8. Perform basic repair work on ESP / PCP's within defined limit of authority/expertise.

9. Perform and record checks on installed units at the well site, checking pump performance.
* 10. Troubleshoot downhole Problems and surface control Problems.
* 11. Use Variable Speed Drive to optimize the Production.

* Previous job:
* Oil & Gas Industry
* Field Production Support Engineer @ Baker Hughes Inc.-Centrilift
An international oilfield services company specialized in Artificial lifting systems.
From July 1999 till October 2003
Job description:
Production management systems and Optimization – Downhole Artificial lifting systems using Oil Pumps such as: ESP, PCP & ESPCP systems and their surface control systems, Downhole sensors and electrical power supplies.
Operations Duties:
Checks system design including insuring adequate HP and head lift, correct cable size and sufficient casing clearance, adequate surface KVA and correct size motor controller.

* Inspects and assembles all types of ESP brand submersible equipment, supervises and assists the subsequent installation of tubing and banding of cable, periodically checks system electrical integrity during installation. Also assembles wellhead.

* Checks calculation required surface voltage, designates proper transformer connections and wire size, sets up surface equipment and insures system safety devices are installed and functioning. Starts and monitors voltages, amperage and production rates. Sets operating parameters on surface controller.

* Pulls and inspects all types of ESP brand submersible equipment, diagnoses problems, makes applicable field repairs to equipment and cable, recommends appropriate action to customer.

* Diagnoses problems and recommends or implements appropriate solutions for surface problems including electrical problems, sand production, gas-locking pumps and insufficient fluid production.

* Performs more specialized electrical work including basic repair work on variable speed drives, trouble shooting down hole pressure systems, converting switchboard wiring from one type of motor controller to another; ( Keltronics, REDA )
* Perform and record checks on installed units at the well site, checking amperage and pump performance
Projects Duties:
1. Responsible for auditing and monitoring the Lump Sum Turn Key Projects Purchasing, Expediting, Material Control and Logistics activities. Procurement Quality Assurance and Quality Control coordinator

2.Review Safety, Health and Environment (HSE) Plans, including Hazard Identification Plan and Job Safety Analysis. Safety inspections of Storage facilities and construction site to detect and correct unsafe practices and conditions.

3.Review Inspection Assignment Packages for assignment of inspection responsibilities
4. Review Purchase Requisitions and Technical requirements to ensure that equipment and materials were being procured in accordance with Project Specifications and Industrial Standards
5. Review and acquired Drawings, Data Sheets, Specification Sheets and Equipment Manuals for incorporation into Project Record Books - Photostat Books, Inspection Record Books and Equipment Manuals.

6. Active role in HSE Inspections of Logistics Operations, Warehouse facilities and construction site
7. Supervise Material Control personnel. Reviewed material requirements generated by Contractors and coordinated with Project Team members to ensure validity. Purchased and expedited material requirement to meet Project Construction Schedule. Traffic Coordinator responsible for coordinating with Customs Brokers and Freight Forwarders to ensure timely clearance of equipment and materials from Ports of entry.
8. Responsible for developing and implementing Material Control Procedures for the Project; inspected, inventoried, issued, receipt and stored Electrical and Mechanical equipment and materials.
9. Responsible for safety inspections of all warehouse facilities, equipment and training of personnel in Safety Operation. Held weekly Safety Meeting with personnel
Field Support Job:
1.Supervise the Installation, commissioning, troubleshooting, maintaining and repairing electrical submersible pumping systems( ESP,PCP,ESPCP)
2-Implement String assembly which consists of (pump, gas separator, seal section, down hole motor and electrical power cable)
3- set the settings for motor controller ( GCS and Centrigaurd )
4- Install, overhaul, commission, troubleshoot, maintain and repair electrical, electronic, pneumatic, mechanical and analytical instrument and control systems of the downhole tools that are used in wells survey.
5- Familiar with replacing electrical & electronic components, soldering techniques and wiring.
6- Work may be performed on site or in workshop and includes evaluating, diagnosing and rectifying system faults.
7- Field recording and instruments testing by special software.
8- Working on offshore & onshore rigs.
9-Electrical power cable Splicing and termination with Subsurface connectors.
10-Install the surface control system which consists of: (transformer, switch board, junction box, variable speed drive, control systems and main power source )
11- Field service quality coordinator.
12- Well testing and observing the dwonhole equipment performance.

Office JOB:
1. Design the downhole string and surface control system using pump designing software.(Autograph)
2. Issue quotations and Prepare contracts.
3. Execute marketing research to determine customer's requirements and
4.Promote the Company's products/services
4. Handle any complaint from customers and response to solve it.
6. Gather marketing information, including prices, discounts and market regulations.
7. Prepare all documents and technical reports related to pulling out, installations for wells operation.
8. Study the well condition from the well history data and set proper procedures for collecting high quality flow test data.

9..Quality control and Quality assurance for all equipment and tools
10. Material coordinator: Develop and maintain an Inventory management system and oversee the implementation of the system via detailed procedures that ensures optimum holding of stock of material.
11.Customer support.

On Job Training 1998: Egypt Air – Cairo international Airport- Aug – Sept 1998
I have trained in the maintenance dept.
Hands on experience in control systems, protection systems and welding operations skills Computer:
MS Office (Word, Excel)
AutoCAD14, Hardware maintenance.

LANGUAGES:
Arabic: Mother tongue
English: Very Good Written and spoken

CAPABILITIES:
Capable of presenting and promoting your work to both technical and non-technical audiences.
Able to demonstrate problem solving and analytical skills.
Able to show a critical understanding of technical equipment.
Committed and motivated with the ability to remain calm under pressure.
Capable of effectively organizing your work and of managing the work of others
Courses attended:
1- ESP installation and application
2- PCP installation and application
3- HSE and Fire fighting.
4- Calibration and testing (on site training)
Countries Traveled to:

Italy,Turkey,Libya,UAE,Jordon,Saudi Arabia and Qatar

Salary Negotiable
Basic + Bonus + Benefits

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4651 to 4700 of 4797)

Go to Search Parameters...

Brief Description

Strong organisational and administrative skills from roles such as project management, technical author and other IT related positions as well as administration and office management positions encompassing such duties as provision of one-to-one training, software support and documentation creation.

Experienced mining engineer, mine layout and design, design and scheduling of waste stockpiles, roads and utility planning, drill and blast layouts, scheduling, short term planning and project work

Graduate Engineering Geologist seeking to build and develop a career in Geology-related Industries. Experienced in dealing with geological issues due to my field surveys initiated by the University. Fast learning abilities, solid understanding of the technical and geological issues.

Supervisor, machine operator, forklift driver, firefighter

have more than 5 years of extensive experience in Multinational Manufacturing for German and Japaneses Companies and construction company where I have been currently employed here in UAE. Relative to acquired skills of SAP and Platinum. Focusing on Budget, Financial Statement Preparation

Operator/laborer

APP FOR THE POST OF STORE KEEPER

IT Microsoft Technologies for object-oriented development including VB.Net, C#, ADO.Net, COM, XML, VC++, SQL-Server, Oracle, MS-Access, and Web technologies like ASP.Net, HTML, JavaScript, etc.

Regional Sales Management, business development, strategic planning, relationship management, account management, sales leadership, market penetration, revenue growth, marketing, presentation and communication

HSE Professional with 5+yrs exp with NEBOSH + BSc [Chem]+PG Adv. Diploma in Safety

Confined Space Watch, Air Trailers, General Safety Duties

Certified Engineering Technician Thorough, attention to detail, goal oriented, ability to multitask, adaptable

Computer Knowledge and Skills.

Safety orientated and skilled in many areas of open pit mining & construction.

5 years experience ex-military senior corporal seeking relocation and employment, Maritime Drilling School Completed, IADC certified, very hard working, ready to work , team oriented, friendly and well disciplined

Junior Analyst with Adminstrative background working on degree in Information Systems

Bilingual, loyal, punctual, hard working, able to lead a team. US VETERAN

Project & Operations Engineer

Fire, Confined Space, Emergency Response, Breathing Apparatus, Security, First Aid, Hazmat

Undergraduate geologist (graduation date:2011) / Blue Card / MARCSTA / Senior First Aid

I have both BSc and MSc in environmental sciences and have scientific and commercial experience in this area. My recent work experience with the MOD includes project management along with extensive complex software use. Very keen to get back into the environmental field.

Washington Class A Commercial Drivers Licenses with Air Brakes Endorsements: Doubles/Triples, Tanker, Hazardous Material

Fireman in France with large experience as fire officer in overseas

Corporate Governance Certificate, Anti-Money Laundering Certificate, Access To Law Certificate, Information Technology Certificate - CLAIT,

Mine surveyor, several years experience surveying underground and surface

I Am A Mechanical Engineering Graduate Passed Out In 2004. Right Now I Am Doing My Pg In Computational Engineering. I Know Multiple Softwares Like Ansys, Catia, Pro E, Abaqus, Caesar, CFX, C, C++, AUTO CAD etc.

Hello my name is Jonathan Gaydos and thanks for takeing the time to read my resume,I have experience on many types of equipment from very small cats & hoes right up to some of the largest mining equipment in the world.I am also used to working in remote locations.

Mechanical Drafter ( Auto Cad Operator)

GOOD COMMUNICATIONAL SKILL WITH GREAT KNOWLEDGE IN MANAGEMENT IN SAFETY

Proven capabilities in HSE supervision and training: this includes heavy construction, onshore & offshore drilling and diving with an assertive personality sensitive to multicultural & multi-national environments with the ability to work and train workforces in remote and harsh environments.

IT expert, Helpdesk Support, Server Administration, IT Manager

DDC & HVAC CONTROLS,

Commission of new diesel and electric fire pumps per NFPA 20

BSc Electrical Engineer; PLC Programmer, Maintenance Engineer, Production Manager

MBA Industrial Managemant, MSc Engineering and Graduate in Mechanical engineering, Experience in CAD/CAE - Finite Element Analysis and Modeling using MSC Nastran, Patran and Hypermesh

8 yrs. experience in training function. Key Skills: Electrical - Switchgear

Ultrasonic testing, radiographic interpreter, magnetic particle testing, dye penetration testing

I am an enthusiastic and hard working high school and college graduate who is keen to find employment. I am reliable, trustworthy and meticulous. I have obtained a certificate for a science fare we had during my Matric year which was a group effort (3 members) of which we were selected for the no. 2

Heavy Equipment Operator with 2 years exp. - Floorman/Roughneck on Oil Rig

Maintenance professional, Electrician, Steam, Safety, Instumentation, multi-skilled

Accountancy Honours & Honours diploma in Network centered computing

maintenance foreman, equipment operator, safety enviromental compliance, forklift, loader, completion fluids

General computer repair, uasage, modification skills.

I have all my safety tickets, and heavy equipment operators ticket.

Engineer seeking Challenging job

I am a Geologist with 5 years of experience in one of the Asia's best exploration and production petroleum company - ONGC. I am willing to relocate and have an ability to work for the organisation with full efforts.

Information Technology, IT Operations & Implementations Regional Manager

Experinced Pre-commissioning, Commissioning, Completions and Handover Coordination. Additional experience in Human Resources.

Accounting, management. I am fluent in English both spoken and written. I am mature, attractive, dynamic, highly motivated to work hard in getting good results, willing to work as a team, creative individual, who will try to do the best for development and growth of the company.

I am a material planning professional with extensive experience in Production Planning, Scheduling, Inventory and Materials control, Document controlling and Purchasing.

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 [ 94 ] 95 96 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out