Resume - Above 14 years of worked experienced in Instrumentation and Electrical Control S...

Misco Jobs

Resume #11431

CONTACT INFORMATION:
View contact information...

WORK EXPERIENCES:

1. Company Name: Saudi Consulting Engineers/ Saudi Electric Company
Position Title: Start-up/Commissioning Instrument and Control System Engineer
Industry: 32 Units x 60 MW GE Gas Turbine
Contractor: GE/BEMCO
Date Joined: August 2007
Date Left: Present

Assigned at Gas Turbine Power Plant (32x60MW) dual Fuel, Stage 1, PP9 Riyadh, Saudi Arabia.
Perform daily inspections and supervise of all instrumentation works, installation, calibration, commissioning and safety interlock test of all instruments that control good performance of the Gas Turbine according to the GE Manuals and International Codes of Standards. Continuity and meggering checks of all instrument and control cables and pressure testing of impulse lines and air supply line tubing and piping. Installation, testing and commissioning of MARK VI control panels using 3 redundant processors for safe and reliable operation and IGV's calibration and measurement checks. Testing and commissioning of Fire Fighting systems, Fire alarm devices and instruments (FM 200, Deluge and CO2) for proper safety and operation of the units in case of fire. Testing and commissioning of Crude/Diesel and Gas system (Natural Gas) skids as fuel of the Gas Turbines.
Perform to wit IGV First fire, Emergency shutdown; Ratcheting, Load Rejection Test, Reverse Power test and other tests involved the start-up and commissioning of the power plant. Perform Reliability and Performance Test of Gas Turbine relating to Instrumentation and Control stability and calculation of the power plant MW outputs.
Generate Punch lists of defective instruments, incorrect instrument installations and settings not conformed to technical specifications.

2. Company Name: Saudi Consult/Merz & McLellan (UK) Consulting Engineers
Client: Saudi Electric Company
Position Title: Instrument and Control Engineer
Industry: Consulting (Power Plant, Engineering & Technical)
Contractor: ABB/ALSTOM POWER
Date Joined: Sep 2002
Date Left: July 2007

Assigned at Shoaiba Steam Power Plant (5x400MW) Stage 1, Saudi Arabia, Western Region.
Perform daily inspections and supervise of all instrumentation works, installation, calibration, cable test, leak test, loop checking and etc. Start-up and Commissioning of all instruments loops using ABB advant controls AC 160/450 DCS systems, and PLC systems.
Witnessed Commissioning and Start-Up Systems in Boiler, Turbine and BOP like Boiler Feed water Pumps, Lube Oil and Hydraulic supply, Cooling Water, FD and ID Fans, Electro Static Precipitators, Burner Igniters, HVAC, Fire Fighting Systems, Security Systems, DCS and PLC control systems.
Generate NCR and Punch list of defective instruments and all equipment not conforming to plant Specifications, Codes and Standards. Review Field Design Change (FDC), Proposed Corrective Action (PCA) and start-up and commissioning protocols Electrical/Instrument drawings and etc. submitted by the Contractor prior to construction and operation.
Conduct and inspect Final Inspection and Final Walk Around on all Systems involving erection of instrument/electrical equipments prior to start-up and first fire. Revision of drawings to be advised to the Contractor for good and proper installation and activation of instruments reflected on P&ID, Loop Diagrams and Location Diagram as per Tender Specifications. Reply correspondence letters, Review, Signed and approved calibration sheets and data sheets, commissioning test and other documents as per designed specifications. Take charge in the Guarantee inspection for testing the Reliability and Performance of the Power Plant.
Attend Minutes of Meeting (MOM) and I&C weekly coordination meetings with the contractors and client.

3. Company Name: Bechtel Power International, Saudi Arabia
Position Title: Instrument and Control Commissioning Engineer
Industry: Construction/Power Plant/Desalination Plant
Date Joined: Jan 2000
Date Left: Jan 2002

Work Description:

Assigned at Shoaiba Phase II Power (5X100MW) and Desalination Plant Lot 1A, Saudi Arabia. Supervise Instrument/Electrical Technician to perform loop checking, start-up and commissioning duties of the plant. Perform calibration of Instruments like Pressure, Flow, Level, and Temperature Transmitters, Local indicators, Control Valves, Switches, Solenoid valves, Vibrations (Vently Nevada), Analyzers and etc.
Performed commissioning of 11 Limestone US Filter Beds for each of the 3 trains Water Treatment System controlled by Allen Bradley PLC 5/40 series in operation of Backwash and Replenished of Limestone Filter Tanks. Assist Vendor to configure additional Logic circuits at PLC for future usage of the system presented to Client satisfaction. Walk downs of priority Systems turned over by Construction. Punch listing and generating NCR's of defective and incorrect installation of instruments as per plant specifications. Coordinate to the Client and discuss Technical Procedure for their satisfaction during start-up.
Maintenance of all instruments for good process and indications and rectifies malfunctioning equipment's or instruments for good operation. Acknowledge all problem reports by the operation group. Recognized, received certification and award for an excellent performance and outstanding contribution during the Reliability and Performance Test days. Also support in controlling Boiler Management Systems. Making reports, filled and signed-up calibration sheets and loop check sheets turned over to the Client.
Other duties and responsibilities were taken upon the request of my immediate superior.

4. Company Name: M.W. KELOGG, Algeria
Position Title: QA/QC ENGINEER, Electrical/Instrumentation
Industry: Oil and Gas Recovery
Date Joined: Jun 1998
Date Left: Mar 1999

Work Description:
Performs daily inspection and supervise of all instrument installations as per Client specifications and standards. Prepare engineering documents like Input/Output (I/O) list, Loop diagrams, Termination Schedules, Piping and Instrument Diagrams (P&ID), Instrument Installation Detail and etc. Loop checking and testing of all instrument transmitters, indicators, control valves, and recorders for proper value settings.
Punch listing improper installation of instruments, cable trays, tubing supports stanchions, control panels, junction boxes and wiring terminations. Generate Non Conformance Report (NCR) and review the Proposed Corrective Action. Witnessed in configuration of input and output devices to the Programmable Logic Controller (PLC) and Distributed Control System (DCS) Processor modules in Central Control Room. Assist in designing additional instruments and cabling as per plant specification. Take charge for the implementation of Motor Control Design using Logic circuits from hardware to software form of operation. Daily accomplishment reports and work plans to my immediate Supervisor and Manager.

5. Company Name: EEI/HOPEWELL COAL FIRED STEAM POWER PLANT
Sual, Pangasinan, Philippines
Position Title: QA/QC Electrical/Instrumentation Engineer
Industry: Power Plant
Date Joined: Feb 1998
Date Left: Jun 1998

Work Description:
Perform daily Quality Control Inspection, Supervision and witnessed construction of all kinds of instruments erected throughout the plant. Review drawings like P&ID, Loop Diagram, Termination Diagram and etc. as per plant specifications in accordance to International Codes and Standards (ISA, ASTM, IEC, and NFPA). Inspections of calibrating different kinds of instruments like transmitters, control valves, gauges, MOV's and etc. Perform Loop checking and cable testing of all instrument cables and counter checks terminations as per detailed drawings.

6. Company Name: EEI/Mitsubishi Heavy Industries, BAPE-Philippines
Position Title: QA/QC Electrical-Instrument Engineer
Industry: Polyethylene/Propylene
Date Joined: Aug 1997
Date Left: Jan 1998

Work Description:
Performs daily inspection and supervision of instrument installation in accordance to plant specifications. Assigned to take charge of inspecting pneumatic air lines, cable trays, wiring terminations, stanchions and supports of instrument installed at major areas of the plant. Cable Testing of instrument and power cables for correct value of applied voltages. Punch listing defective instruments wrong terminations, improper tubing and wiring instrument installations. Take charge in completing quality control involving electrical / instrumentation reports and documents for the turnover packages from our main contractor to the Client.
Assist Vendors and Clients in performing Electronic and Pneumatic Control System design for PLC/DCS configuration of inputs and outputs of various instruments used in the plant. Interpretation and application of motor control design using logic gates from hardware to software form of operation. Analyze and interpret good installation of various instrument used of the plants per plan of vendors specification before installation. Perform as built drawings, revisions and other important documentation for final configurations.

7. Company Name: EEI/Phil. Geothermal Inc. - Bicol, Philippines
Position Title: Instrumentation and Control Engineer
Industry: Construction of Geothermal Power Plant
Date Joined: Jun 1997
Date Left: Aug 1997

Work Description:

Assigned at Philippine Geothermal Power Plant, Philippines.
Take charge to supervise instrument installations, process tubing, pneumatic airlines instrument stanchions and supports, Cable trays, cable pulling and cable terminations. Perform testing, calibration and assist commissioning works of control valves, transmitters and pneumatic and electronic controllers. Take down notes of the behavioral characteristics of instruments during field start-up and commissioning operation.

8. Company Name: EEI/Bechtel Power International - Oran, Algeria
Position Title: Instrumentation and Control Engineer
Industry: Liquefied Natural Gas Refinery
Date Joined: Nov 1995
Date Left: May 1997

Work Description:

Assigned in Instrumentation and Control Engineering works, LNG Renovation Project, Algeria.
Perform commissioning of different kinds of electronic and pneumatic instruments responsible for the automatic control system of the plant. Instrument Loop checks in field as well as in control room for checking the proper setting of instrument conformance to engineering specifications. Assist operation group in maintaining instruments and equipments during shut down and start-up process. Analyze and interpret P&ID, Logic, Cause and Effect Diagram. Well versed in performing as built drawing design for final configuration using Auto cad system. Revised termination of electrical and instrument from vendor to the design project specification.. Take down notes of problems involved during loop checking to make proper configuration during start-up. Perform daily checking and tracking of instrument loop checked recorded at computer database. Take charge in completing Loop Packages and loop drawing for Turnover packages from the main Contractor to the Client.

9. Company Name: EEI/BVI/MHI- Pagbilao Power Plant- Philippines
Position Title: Instrumentation and Control Technician
Specialization: Process Control & Instrumentation
Industry: Power Plant Construction
Date Joined: Mar 1995
Date Left: Oct 1995

Work Description:

Assigned at Pagbilao, Quezon Power Plant Project (2x385MW) Philippines.
Perform testing, calibration, installation, start-up and assist commissioning duties related to field of Instrumentation and control of the plant. Equipment worked on includes pneumatic and electronic flow, level, pressure, speed, temperature transmitters, indicators control valves, limit switches pneumatic controllers and etc. Assist in operation of DCS control systems based on Honeywell, and Yokogawa controls. Assist vendors in field inspection of instruments during commissioning process. Marking up of instrument data sheets and calibration sheets after work has been completed for representation to the client. Daily monitoring of accomplishment reports ready for start-up service.

EDUCATION & CERTIFICATION:

Highest Education Level: Professional Degree
Field of Study: Electrical Engineering
Major: Electrical
Institute / University: DMMMSU-College of Engineering & Technology
Located In: Philippines
Graduation Date: April 1994
Second Highest Education
Level: Professional Certificate
Field of Study: Engineering (Power/Petroleum/Oil/Gas)
Major: Instrumentation and Control
University/Company: Engineering Equipment Incorporated
Located In: Philippines
Graduation Date: May 1995

Certification Year Obtained

Registered Electrical Engineer 1994
Instrumentation and Control 1995

TRAININGS/SEMINAR ATTENDED:

May 2001: Bechtel Environmental, Safety and Health (BESH)
Leadership Workshop
March 1998: Safety Handling for Radiation, Sual Power Plant Pangasinan
January 1995: Instrumentation and Control System, Engineering Equipment Inc. Corp. (EEI), Bagumbayan, Libis, Quezon City
March 1995: Total Quality Management
EEI Corp, Bagumbayan Libis Q.C.
February 1994: Protection Relaying Devices
DMMMSU-College of Engineering and Tech., San Fernando La Union
December 1993: Breaker and a Half Scheme, NPC Bauang, La Union Substation

ADDITIONAL INFORMATION:
BIRTHDAY: April 26, 1972
CIVIL STATUS: Married
RELIGION: Roman Catholic
HEIGHT: 5'5''
WEIGHT: 128 Lbs.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 201 to 250 of 4812)

Go to Search Parameters...

Brief Description

B.Eng, Traffic and Transportation Planning and engineering, local area traffic management, transportation modelling, sidra, transyt, trips, bus transit, light rail route and station planning

Traffic Engineer with Master of Technology degree in Transportation Engineering. I have about 11 years of technical and project management experience in UAE, Qatar, India, Sudan and Saudi Arabia, in the area of traffic and transportation engineering/planning;

Advanced Certified Interconnect Designer. Trade Radio Technician. Diploma Electronics Eng. CID & CID+ Training. 17 years experience in both Comercial and Defence (Aus) Specialising In High Speed Digital, RF, Analogue and Video Board Design using Altium Software.

Electrician

Piping design and gernal 3D model design using AutoCAD and CADWorx. Conduct reviews for Design Engineers and Field Engineers with Navis software. Direct drafters in preparation of drawings and plans. Coordinate drawings with other design agencies, fabrication and construction.

Electroplating and running chemical an run test on them and check qc on parts

NDT level III, Senior certified welding inspector, experienced in most industries

I am a traveling supt. looking for someone to utilize my skills. I am an excellent problem solver and work well under pressure.

Results oriented engineering professional with 20 years experience in project management, process engineering, and facility engineering

Honest, hard working, tenacious employee

Directing Large Engineering Teams.

VERY GOOD EXPERIENCED IN CIVIL ENGINEERING AND CONSTRUCTION PROJECTS SUCH AS CONSTRUCTION OF BUILDINGS, ROADS, HOUSES AND HOSPITALS.

I am a railway track engineer past 25 years in INDIA, MALAYSIA,DUBAI METRO PROJECT.

Project Manager in Civil Engineering with 14 years experience. Excellant communication skills and able to work under pressure with minimum supervision.

FIMILIAR WITH ALL TYPE OF SURVEY EQUIPMENT

Over 15 years of working experience in the construction projects on heavy civil works, roads, bridges, metro rail, building construction, petrochemical plants, industrial plants, multi – purpose irrigation system, commercial/ residential buildings, and knowledge in Engineering Tendering and Contrac

Power pant engineering

Sr. Project Manager / Project Manager, currently working for a Property Development Company (Interior Design & Fitout Division) in Dubai with over 15 years of hands-on management experience in the Construction industry. I am presently managing Interior Design & Fitout scope of works for a prestigiou

Above 14 years of worked experienced in Instrumentation and Electrical Control System overseas in a Reputable International Construction Companies. Supervision, Erection, QA/QC Inspection, Start-up, Commissioning and documentation works. Review Design and technical responsibilities for good quality,

Specialist in Piling, Foundation and Ground improvement.

I have Eleven years of experience in Architectural design development, planning & scheduling, DD & CD development for Architectural/Interior projects. I have experience on windows environment and worked on CAD Applications like ACAD, Revit implementation and management tools like MS Project, Primave

Welding, fitter, sheet metal fab. and steel worker.

Qualification:Bachelor of Engineering(Civil),from Assam Engineering College,Experienced in design of RCC Bridges with Pile /Well foundation

The position I seek is as a Construction Manager; Site Manager; Area Manager; Site Superintendent based on the project site managing the overall project construction. I have experience in bulk earthworks, civil construction, SMP installation, electrical installation and final plant commissioning.

For the past twenty two years I have pursued a career as a Linesman, acting principally as a team player with additional professional duties.

Significant experience in electrical construction, commissioning, production and maintenance

I am applying for a position that suites my qualifications and experiences. Civil Engineer, who have high proficiency in Project Management, People Handling, Problem Identification and Definition, Problem Solving, which I acquired thru my long time exp

Capable to manage an organization for Electrical and Civil Engineering jobs.

A higly adaptable professional of proven ability with extensive on-site experience in worldwide locations who offers: construction and civil works expertise, safety and QA/QC awareness

Journeyman/Red Seal B Pressure Welder

Field Operations Manager with 20 years experience in the civil and concrete foundation business. Strong technical and hands-on expertise in various different forming systems which include plywood, aluminum, steel and tunnel. Detailed knowledge of site work and concrete placement.

Proffesional, time served Ready Mixed Concrete technical manager. Concrete specialist with over 25 years management experience in UK, Hong Kong, Macau, China and S.E. Asia.

I am currently holding an AVP position in telecommunication company working under the network group. I am a network governance officer who implements/monitors all actionable instructions in the Mancom proceedings.

Education from both China and United states major in transportation engineering and computer science. As a transportation engineer with more than 10 years¡¦ experience in both United States and China, his work extended from general transportation infrastructure design, transportation plan

Heavy civil construction skills. Concrete apllications and procedures. Sediment and erosion. Overhead and underground utilities construction. Heavy equipment operation. Regulatory laws pertaining to heavy construction.

Equipment operations

Marine Surveyor

FOR THE POST OF QUANTITY SURVEYOR (BUILDING SECTOR)

Certified PMP having rich experience in EPC & construction management of Real Estate, Infrastructure and Petro-chemical Projects, Proficient in Primavera, MS Project and MS Office

Maintenance Planning & Scheduler for 30 years in Industrial Setting

B. Com. 16 years of experiences different construction materials such as soil, aggregates, concrete & asphalt laboratory & field test & Prepared test reports by using computer.

Maintenance Welder/Fitter with strong background in Plant Maintenance

Land Surveyor , Autocad Tech.

Senior Health, Safety & Environmental Practitioner and Trainer

electrical /instrument superintendent

Planning & Project Control

Experienced Construction Superintendent / Manager Residential / Commercial

Mr. Bipradas Rajbongshi is a specialist in the field of Geotechnical Engineering. He has 20 years experience in technical and managerial roles.

A Senior Contract Specialist with 25 years international experience on most types of construction/engineering projects worldwide.

Climb and rescue certified Class II OSHA 30 hour construction C-Stop 10hr BOP-ARSC-OSHA-10hr. first aid certified CPR/AED adult certified Safety Inspections Quality Control NCCCO certification number: 070431577 Mobile Crane Operator Proficient on a computer (MS Word, Excel power point)

First 1 2 3 4 [ 5 ] 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out