Resume - Make, Review and implement Engineering design, construction work,inter-diciplina...

Misco Jobs

Resume #11509

CONTACT INFORMATION:
View contact information...

OBJECTIVE:
To obtain a challenging position in the Oil & Gas or Power Industry that will allow me to utilize my education, experience and personal abilities.

EDUCATION:
3 Years Course in Mechanical Engineering with First Class passed in 1987 from M.R.K Polytechnic Institute, India.

EXPERIENCE:
17 years experience in the Oil / Gas & Power Sectors.

PROFILE OF EXPERIENCE
Construction
- Review the Engineering design and construction work in accordance with the Project Specifications and applicable Standards.
- Review inters-disciplinary interfaces and follow up with the Engineering team.
- Write construction specifications for mechanical construction activities and interface with construction personnel during construction and testing.
- Review and clarify the Technical / Engineering queries of the various sub-contractors.
- Check, review and ensure that all the Field Design Modifications / Changes, Contract Engineering Data Sheets are processed and recorded.
- Ensure all the field modifications are recorded and the "As-Built drawings are incorporated in the drawings.
- Review of the Project procurement materials with the concurrence to the relevant design an drawings.
- Review, Coordinate and monitor the manufacturing plans of various vendors and contractors, give them target dates based on overall project plan and also make inspections during the fabrication stage.
- Review the FAT punch and follow-up the punch list clearance process.
- Project Planning and scheduling of construction to link up with other infrastructure facilities and hand over.
- Make, review and implement method statements for execution of Construction.
- Review and monitor the rigging methodologies with Job Safety analysis made and implemented by the Contractors
- Issue Mechanical progress figures with daily, weekly, and monthly discipline reports.
- Push & make improvements for achieving the various milestones & targets during the construction phase.
- Coordination with Client, vendors, plant personnel, other departments and contractors.
- Ensure that all the Non-Conformance Reports issued during Procurement and Construction phase are closed promptly by the concerned responsible group
- Make, publish and ensure the signing off the Mechanical punch list.
- Implement & maintain Safety Standards and codes.
- Identify the back charges and ensure to notify the concerned contractors of the deviations.
- Issue of Field instructions, make change orders and progress valuations.
- Review and ensure the contractors compliance with all Quality Plans, Procedures, Inspection Test Plans, Erection Completion Packages in coordination with the QC Dept

Commissioning
- Preparation of the commissioning procedures and schedules.
- Ensure that adequate care and maintenance / preservation of equipment are being carried.
- Make all Mechanical Sub-System Pre-commissioning specific tools dossiers at RFC stage.
- Plan the critical commissioning, operational spares for all the Equipments.
- Review and ensure that any requests raised for waive off's and concessions by the contractors quickly resolved
- Prepare, review and Ensure that the Technical Documents are issued and controlled within the commissioning group in accordance to the Project procedures.
- Reviewing specifications and procurement requirements to ensure adequate provision been made for testing, flushing, cleaning and other pre-commissioning functions.
- Prepare, Review and complete all Commissioning check lists as per the specifications.
- Perform checkout, cleaning and commissioning tasks on various equipments.
- Ensure that adequate care and maintenance of Equipment / Preservation of Equipments
- Undertake mechanical run tests of all Rotating Equipments and their trouble shooting.
- Maintain commissioning and start-up records.
- Preparation of preventive maintenance & lubrication schedules.
- Utilize the safety tagging and lockout procedure/process.
- Planning, scheduling and performance of equipment maintenance during the commissioning and start-up of the plant.
- Supervise assigned construction craft labour.
- Participate in Facility performance and acceptance testing.
- Preparation and implementation of preventive maintenance & lubrication schedules
- Compilation of maintenance data for review and analysis.
- Shutdown planning and co-ordination with the contractors.

ORGANIZATIONS WORKED
Fisia Italimpianti, Federal Electricity & Water Authority's Ro Project, Ghalilah, UAE.
Senior Mechanical Engineer, May 2004 – Till Date.

I am responsible for the Erection and Commissioning of all rotating and static equipments. Which consist of Pumps and Compressors, EOT Cranes, Filters, RO Modules, Exchangers and Vessels. Lead a multinational work force consisting of Engineers, Supervisors and workmen of different crafts and trades and reporting to the Site and Commissioning Managers.

DODSAL PTE LIMITED, Occidental's Northern Oman Gas Project, Safah, Oman.
Mechanical Engineer, October 2003 – Feb-2004.

I was responsible for the Erection and Commissioning of rotating and static equipments. Which consist of Compressors driven by Superior Engines(GSI Weatherford) and Gas Turbines (Taurus 60 units supplied by Solar) & Atlas Copco and their related Air Coolers, Exchangers, KO Drums, Scrubbers & other Package units. Lead a multinational work force team and report to the Chief Construction and Commissioning Managers.

ENELPOWER, DEWA K-II POWER STATION, Dubai, UAE.
Commissioning Engineer, October 2002- October-2003

I was involved in the Commissioning & Maintenance activities of the Gas Turbines (3nos each with cap of 242MW), Gas Station, Auxiliary Boilers (2nos 370tons/Hr), HRSG's (3nos 700tons/hr), and Demin Water Station. I was very responsible for carrying out Mechanical Commissioning and Maintenance activities of the total plant. Headed a multinational workforce team and report to the Site and the Commissioning Managers.

DODSAL PTE LTD, DEWA K-II POWER STATION, Dubai, UAE.
Mechanical Engineer, September 2001- September 2002

I was responsible for the Erection of all Rotating & Static Equipments. Which include Siemens make Gas Turbines (V93.4) 238 MW, Gas Compressors of Nuovo Pignone (SRL) & Boje makes, CBI make FD Fans, BFW's Pumps of Thermo Mechhanica & process pumps of Garbarino makes, Diesel Gen Sets (Deutz make) & Static Equipments like Feed Water Tanks, Dearetors, Total Gas Station Equipments including storage modules, GPRS skids, Gas filters & flare, demin plant equipments like mixed bed filters. Headed a multinational workforce team and reported to the Chief Construction & Commissioning Managers.

MECON, AT NGL-4, DUKHAN SITE, Qatar.
Mechanical Supervisor, March 2001- September 2001.

I am responsible for the Erection and Commissioning of all Rotary {Gas Turbines Nuova Pignone make Frame-V (MS-5002) & Alstom's Tornado 8 MW}, Nuova Pignone, Mitsubishi, Maffi Trench, Demag Laval make Reciprocating & Centrifugal Compressors), Pumps of various makes. Lead a multinational team of Consisting of, Formens, & workmen of different crafts and trades and reporting to the Construction Manager and the Lead Commissioning Engineer.

RELIANCE PETROLEUM LIMITED, Jamnagar, India.
Maintenance Engineer, Sept 2000 – March 2001

This is the world's largest refinery. I was responsible for the Commissioning & Maintenance of Gas & Steam Turbines, Pumps, Centrifugal and Reciprocating Compressors of Alfa Laval, Ingersoll Rand. & Pumps of different makes, maintenance of Columns, Storage Tanks etc. in the Aromatics Plant and was reporting to the Maintenance Manager and the Plant Manager.

ABU DHABI GAS LIQUEFACTION CO (ADGAS), Das Island, UAE.
Mechanical Supervisor (1999-2000).

My Roles included technical service and maintenance to ensure safe and reliable operation of the plant. Some of my responsibilities are associated with the breakdown and preventative maintenance. Supervise and co-ordinate a multi-disciplined work force in the day to day running of a CENTRAL PRODUCTION FACILITY, which includes gas & steam turbines, Centrifugal and Reciprocating Compressors & pumps, valves. Supporting production operations by ensuring high reliability, and availability through maintenance work in a planned, safe and efficient manner. Lead a multinational team of Consisting of, Formens, & workmen of different crafts and trades and reporting to the Maintenance Manager and the Lead Mechanical Engineer.

Consolidated Contracting International Company,
RAS Laffan Lng Onshore Facilities Project, State Of Qatar.
Mechanical Supervisor, 1997-1999.

I was responsible for the erection and commissioning of rotary equipments such as Gas Turbines GE make frame VI, Compressors of Ebara, Elliot Mitsubishi, Demag Laval makes, Pumps, Sea Water Intake equipment Erection of Columns & fixing internal trays. Lead a multinational team of Consisting of, Charge-Hands & workmen of different crafts and trades and reporting to the Lead Construction Engineer.

HINDUSTAN POLYMERS, VISAKHAPATNAM, INDIA.
Mechanical Engineer, 1987-1997.

CONSTRUCTION STAGE: 1987-1989

I was involved in the project activities for Styrene, Expandable Polystyrene and Polystyrene plants. Erection and Commissioning of all Rotating Equipments like Steam Turbines 5mw, Compressors (Worthington, Ingersoll Rand, Alfa Laval makes), Pumps (Pacific, KSB, & Worthington makes), Cutters, Vibrating Screens, Mixers, Extruders, & Static Equipments like Fractional Distillation Columns, Reactors, Oil Fired Boilers, Fired Heaters, Flare etc.

MAINTENANCE OF THE PROJECT: 1990-1997
I was transferred to the Central Maintenance Workshop. Some of my responsibilities were
- Planning of day to day as well as annual turnaround jobs
- Trouble shooting of Rotating equipments.
- Standardization of maintenance procedures etc.
- Development of indigenous vendors for imported spares.
- Preparation and implementation of preventive maintenance & lubrication schedules.
- Shutdown planning and co-ordination with the contractor.

KNOWLEDGE / TRAINING:
a) Centrifugal pump training, improving pump system and seal reliability.
b) Steam Turbines maintenance training.
c) Familiar with codes and standards. API 610,614,617,618,619 & 650
d) Safety Inducted for H2S, safety & fire fighting procedures.
e) Finished a Safety Course in "Safety at Construction Sites" conducted by Bureau Veritas, Dubai.
f) Done a First Aid Course.

COMPUTER SKILLS: Primavera, MS Office 2000, Visio and MS Office.
REFERENCE: Available on Request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2301 to 2350 of 4805)

Go to Search Parameters...

Brief Description

Profile: Activities Involved Designing, Coordination with Shop supervisors, Using Auto Cad for designing 2D Drafting, Using NX4 for designing 3D modeling.

Ability: proficient in window application

Action oriented, contracts-project manager

Senior Electrical Engineer

I have over 5years and 8 months of combined experience in computer programming and design of electronic appliance controls mainly for HVAC products. Presently I am working as an Electronics Engineer (HVAC Electronic Controls Design, Testing & Approval) in the R & D dept. of Awal Gulf Mft. Co.

This is a resume which will illustrate briefly what I have achieved both with educational and industrial environments.

Sr Structural Designer / PDS FrameWorks Coordinator and project set up.

Estimator, Project Manager, Project Engineer, Construction Administrator, Architectural Designer, CAD

Free! Oil & Gas Finance, Commercial Manager. 30+ years industry and 20+ years international experience.

Class 6 Underground Coal Miner. Certified Welder. Certified structural steel welder. Skilled in rebuilding all types of machinery. Skilled in running all types of equipment.

instrument engineer with 6 yrs of experiencer in construction management,projects and commisioning in instrumentation field.

Primavera Scheduler

Has 15 years of top, diversified logistics/operations management experience.

Facilities supervisor for utilities, electrical disturbution, ammonia refrigeration, power boilers and heat exchangers,production equipment, infrastructure, mechanical contractor for twenty years,

Over thirty years engineering, construction, remediation, operations, start-up, and manufacturing experience includes: project management; project planning, sched¬uling and analysis; cost engineering; cost, schedule, and earned value analysis and reporting; WBS, OBS development; EAC, SPSPI and CPI

Radiation Safety Officer, Certified Health Physicist, Environmental Manager

Mechanical Engineer, 2 yrs of experience in design and development, cad packages- CATIA V5, solidworks 2006

An ambitious, highly motivated and energetic civil engineer with extensive commercial experience in construction business. Superb managerial, communication skills combined with analytic and practical personality. Looking for project coordinator, contract administrative or similar position.

as below

To obtain full time employment with a Prominent company in the Construction Industry that offers stability, growth, and advancement opportunities where I can utilize my skills as a Heavy Equipment Operator.

For the post of Design and draughting

Six years of experience in Project Management, Contract Management, Quality Control and site supervision of high-rise residential and commercial project. About four year of experience in Project Management of an industrial projects.

Objective: To contribute my technical skills and to be part of professionally managed Organization that provides excellent opportunities for learning and scope for Individual development.

Vast Experience in Business Development, Administration and Management, Business correspondence.

Architect and Environmental Planner Total Job Experience-2.5 yrs as an Architect 2 Months as a Planner

Bilingual engineer with experience in engineering and teaching. Experience in administration, group management. Dynamic and outgoing by nature.

MSc in Environmental Engineering from University of Nottingham, UK

Well rounded journeyman electrician looking for industrial, commercial or residential position. Experienced with supervising apprentices and other jw's.

I am piping engineer with diploma in mechanical engineering to Poli- Technic institute "GH.Asachi" Iasi, Romania

Piping Designer with Over 20 years experience within the Oil and Gas, Petro Chemical, Refinery, Textile, Pharmaceutical and Nuclear Waste Industries

hardworker STORE KEEPER

NDT technician RT MPT LPT UT

Young academically accomplished geotechnical engineer, practical experience in the mining industry both domestic and overseas.

Application for the post of Safety officer

EXPERIENCED PIPING ENGINEER WITH PDS ADVANCED EXPERTISE / TECHNICAL DATA SPECIALIST

Make, Review and implement Engineering design, construction work,inter-diciplinary interfaces, Construction Specifications, Progress reports, Quality Plans and all the commssioning and Maintenance Procedures.

Construction Project Manager Restaurant (Swiss, 39, Trilingual E/F/G) is looking for a new international career opportunity. 10 years experience in construction project management (McDonald's restaurants and General Contractor). Willing to re-locate in the US/Australia/NZ/Canada.

Knowledge of Hydrotreating & Hydrocracking, Catalytic Cracking, Distillation and Amine plants. Knowledge of Process simulation (HYSYS, ASPEN Plus, PRO II and HTRI), PFD, P&ID, Flare and Relief systems, LDT, Hydraulic calculation, HAZOP review, Equipment sizing, TBE, DPDT and process data sheet

Electrician

I'm a proficient, reliable and a technical sound welder.

QA/QC, CERTIFICATION, TURNOVER

Work on a farm all my life, I went to school last year for heavy equipment

Experienced Buyer/Purchaser, very versatile background from different countries and industries.

I have over twenty years pipefitting experience. Most of this experience has been in industrial chemical and paper processing. Five years of this experience has been as an foreman. I have used computers for report writing, maintaining records and numerous other tasks, have worked internationally.

Interior fitouts Project Manager - expertise in Site execution, Management, Planning , Procurement, Coordination between Services. A Go-Getter and Self-Motivated Engineering Professional.

19 years of experience as a Camp / Accommodation-Facilities Management (Staff Welfare Operation and Maintenance) in Oil & Gas, EPCC, Company (Road & Bridge, Electro-Mechanical Contractor.

I have a master degree from the American University in Cairo, excellent computer skills, English & French languages, Excellent communication skills, and presentable. I prefer workin in construction management field

Develop & implement Contractor’s Quality Control Plan in accordance with contract & technical specifications including writing the Inspection & Test Plan, Quality Audits, Record Keeping, Prepatory Phase Meetings, Resolve NCR's, Process Control, Sub-Contractor Control, every aspect of Quality Control

Im certified coating inspector B-GAS grade2&SSPC-PCI

Senior Electrical, Energy Model, LEED, sustainable, Head, Manager, renewable, coordinator, building commercial, residential, healthcare, Education, industrial, parks, Hotels

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 [ 47 ] 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out