Resume - Control Systems Engineer (Programmer & Designer)

Misco Jobs

Resume #12067

CONTACT INFORMATION:
View contact information...

WORK EXPERIENCE
10/04 to Date Interstates Control Systems Inc., Sioux Falls SD, USA.
System Integrator of Allen-Bradley and Intellution.
Food, Beverage and value added Agricultural Industry.
Control Systems Developer
Responsibilities were to program, test and commission DCS and PLC based Process Control Systems, Emergency Shutdown Systems, and Fire & Gas Systems for Offshore Platforms.
1. Programming (A-B ControlLogix) & HMI development (Intellution) of Soya Bean Oil Refinery for AGP, Omaha Nebraska.

08/03 to 09/04 Maverick Technologies, Houston TX, USA.
System Integrator of Yokogawa, A-B and Intellution.
Oil, gas and Pharmaceutical Industry.
Control Systems Design Engineer / Software Specialist
As Control System Design Engineer, responsibilities were to design and implement DCS and PLC based control systems for Offshore Platforms. As Software Specialist, responsibilities were to program, test and commission DCS and PLC based Process Control Systems, Emergency Shutdown Systems, and Fire & Gas Systems for Offshore Platforms.
2. Engineering, Design & Programming (Centum CS3000 & Yokogawa-Prosafe) of Benguela-Belize Offshore Platform Project for Chevron Texaco & Daewoo Shipbuilding and Marine Engineering (DSME).

10/02 to 08/03 Intech Process Automation Inc., Houston TX, USA.
System Integrator of Yokogawa, A-B & Wonderware.
Oil & Gas Industry.
Hardware Engineer
Responsibilities were to design and implement DCS and PLC based control systems for Offshore Platforms.
1. Engineering & Design (Centum CS3000 & Yokogawa-Prosafe) of Sanha Condensate Offshore Platform Project for Chevron Texaco & DSME& Daewoo Shipbuilding and Marine Engineering (DSME).

05/02 to 10/02 ICS Worldwide Inc., Clifton Park, NY, USA.
System Integrator of GE Fanuc & A-B.
Gas & Steam Turbines and Compressor Control Systems.
Controls Engineer
Responsibilities were to Program, Test, & Commission PLC based Gas Turbine Control Systems.
1. Programming (ControlLogix) & HMI (Wonderware) development for Ruston TA1750 Gas Turbines for Chevron Nigeria.
2. Programming (90-70 TMR) & HMI (Wonderware) development for Hispano-Suiza THM Series Gas Turbines for Sona Hess Algeria.

06/01 to 05/02 JCS Controls Inc., Rochester, NY, USA.
System Integrator of Rockwell Automation (Allen-Bradley).
Food & Beverages industry.
Controls Engineer
Responsibilities were to Program, Test & Commission PLC based control systems in Food and Beverages industry.
1. Programming (PLC5) & HMI (Panelview 1200) development for Batch Process Automation for Suiza Dairy Puerto Rico.
2. Programming (PLC5) & HMI (Panelview 550) development for HTST Process Automation for Kohler Mix Newington.
3. Programming (ControlLogix) & HMI (RSView32) development for S88 Batching & Digital In-Line Blending Application for Purdue University.

07/95 to 04/01 Innovative Private Limited, Lahore, Pakistan.
System Integrator of Allen-Bradley and Honeywell.
All industries.
Senior Application Engineer
Responsibilities were to Study, Analyze, Design, Program, Test & Commission PLC based control systems.
1. Bladder Unit Automation, SAGA Sports Sialkot, Pakistan.
2. Urea Plant Shutdown System Automation, Engro Daharki, Pakistan.
3. Load Shedding System Automation, Engro Daharki, Pakistan.
4. Load Shedding System Automation, FFC Goth Machi, Pakistan.
- DCS (Yokogawa Centum CS3000).
- Hybrid Controllers (Honeywell PlantScape, & A-B Process Logix).
- PLCs (A-B SLC500/PLC5/ControlLogix, GE Fanuc 90-70/30, & Prosafe/Moore APAC+/Quadlog).
- Vibration Monitoring System (Bentley Nevada 3300/3500).
- HMI/SCADA Software (RSView 32, Wonderware, & Intellution).
- Variable Frequency AC Drives (A-B 1305/1336).
- Communication Networks (A-B ControlNet/DH+/DH-485/RIO, GE Genius Bus, Yokogawa VNET/MNET, Ethernet, MODBUS and RS232).
- Instrumentation (Honeywell, Rosemount, Yokogawa, Foxboro and Brooks).
- Motor Control Centers MCC (Allen-Bradley and Cutler Hummer).
- Low Voltage Switchgear (Allen-Bradley and Schneider Electric)
- Microsoft Windows 95, 98, NT, 2000 and XP operating systems.
- Microsoft office and Microsoft Project.
- Drawing & Drafting Software (Autocad2000).

EDUCATION
1990 - 1995 University of Engineering & Technology, Lahore, Pakistan.
- B. Sc. Electrical Engineering (16 Years), %age: 76, Grade: A
- Good Spoken and Written English Communication Skills.
- Good Project Management and Engineering Skills.
- Good Bid Evaluation and Proposal Making Skills.
- Current Salary $50,000 per Annum
- Work Status in USA H-1B

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 3251 to 3300 of 4806)

Go to Search Parameters...

Brief Description

An M.Tech(Electronics) graduate with work experience in Industrial Automation, Embedded programming and teaching.Key skills include:SCADA, C, C++, Embedded C, VHDL, Verilog, MATLAB, Communication Protocols.At present, working for ABB India and has successfully completed a number of projects.

Microsoft Office, HRMS, Windows XP, Professional, other administrative softwares

Modeled and prepared detail engineering drawings for the projects executed interference checking and subsystems interfacing for the entire equipment.

Experienced involved problem solver with more than nineteen years of progressive experience, offering significant expertise in project management, manufacturing and oil and gas accounting management, and focused on management operations and am able to continue to learn new processes and apply them.

I am an advanced Scaffolder (CISRS), Advanced Scaffold Inspection, Risk Assessment Trained, and am Computer Literate. I have an extensive understanding of scaffolding and design, the importance of health and safety and the best ways to achieve the goal of supplying clients with a cost effective and

MEP project manager,project management,design co ordination & implementation,execution,commisioning and handing over with proper documentation,core electrical engineer,high rise buildings

As evidenced by resume I am extremely skilled in sales management and business development. I have extensive knowledge and experience in electrical, mechanical, mining ans sales/service management.

17 years safety experience, Grad Dip OHM, MSIA, (RSP Australia), Trainer

Piping designer

Construction Management/Estimating/Supt/PM

Experience in pipeline, Power Plat Installation

Technical Writing with 15 Years of Experience in the UAE

I want to find work Overseas in the Tower Construction Field.

Electrical engineer, Constraction, Control & Instrument, Coal, Oil & Gas projects,

Seeking Managerial or Supervisory position in Logistics & Transportation.

instrument supervisor 5 year experiance

Chief Enineer, Limited, Oceans, Unlimited HP

Jamiu Badmos is a Registered Engineer cum HSE Professional with over 9yrs experience in QHSE & Project Management

23 Years of Various field of accounting

Director

Electrical field

Professional with 4 ½ years experience in Oil Industry construction projects as contracts administrator and a cost controller.

I have been working in the Safety, Health and Environmental (SHE) field for more than 9 years. Throughout these years I have been exposed to various SHE related requirements and problems. One of my key competency area will be managing workplace day-to-day safety, health and environment issues and

I am seeking Medical Advisor/Occupational Health position to continue my occupational physician’s career with a multinational company.

Welder Fitter, with pressure certification (F3/F4 on 5G uphill progression -mild steel). Worked in fabricating shop on commercial and industrial products. Very proficient with GMAW and SMAW. Little experience with GTAW. Worked mostly mild still and some alloy. Little aluminum experience.

Ability to perform field inspections, risk assessment, review, prepare procedure and hand.Self-development in administration and management skillsle permit to work system.Ability to improved performance, utilizes effective follow up actions to solve employee or work related problems.

I have 25 years experience in the Instrumentation field as Instrumentation supervisor, Instrument QA-QC Inspector and Instrumentation technician. Present I am working for (YANSAB) Yanbu National Petrochemical Company a SABIC affiliate (Kingdom of Saudi Arabia.).

A Degree in Business Admin and Management, skills and experience in secretariat and Administrative duties, have worked in an Oil and Gas company, 2 Construction Companies, good mastery of Micro Soft applications, excellent in both spoken and written English, with French and an additional Language.

CSWIP 3.2,BGas Grade 2,ASNT Level 3 in RT,MT Level 2 in RT,PT,MT,UT

Western IT and data networking expertise. Enterprise and Telecom experience. PMP holder

Journeyman Industrial Electrician , Apprentice Instrumentation Mechanic / PLC , DCS, HMI, SCADA . Underground / Surface, Oil and Gas, Mining

Handle preventive maintenance for the machine , servicing machine ,replace breakdown component /or equipment.

RSLogix 5000, PLC 5, SLC (Allen Bradley) Concept (Modicon, Quantum) Unity (Modicon, Quantum, M340, etc.) Setting up and commissioning of Advantys IO systems Rockwell, RSView Wonderware, Intouch

I am an electrician and electrical contractor. I have been involved in a variety of different projects including a Power Station, Coal Mine, Prision and an Airport.

Bridge, Highways/Roads engineer: A devoted qualified Civil Engineer seeking a challenging career opportunity in Bridges/Roads construction management projects in the Middle East/Africa regions

Construction Manager for large scale projects

MSc Engineering / Business Development / Project Management /Energy fielsd

Control Systems Engineer (Programmer & Designer)

Project Manager / Finance Management

22 YEARS POWER, PETROL-CHEMICAL, AND REFINERY INDUSTRY

10 Plus years Developing and maintaining EPC Schedules Utilizing Primavera Softwares

ISO Implementation, Documents, Records, Archival Management, QA Manager, Writing Technical Documents, Auditor

20 years - Electrical Trade Background, 4 years - Reliability planning-scheduling Oil & Gas

Installation, Maintenance, and Repair, Multi Site Cosmetic/Maintenance, Equipment Operators

I am currently Regional Safety Manager with Thiess John Holland in Melbourne Australia. I have extensive rail, mining and construction experience and have been involved in these industries for over 15 years. I have international experience, working with the Taiwan High speed rail project.

Tendering & Estimation, Proposals Preparation, Contracts Engineer

Fourteen years of consistent and solid work experience in the field of Instrumentation, out of which the past ten years are in the Middle East. Certified in Instrumentation Mechanism by the Government I.T.I. from T.R. Pattinam, Karaikkal, Pondicherry, India during the year 1990-92.

Achieve sustainable profit growth and customer happiness using technology to reduce costs and increase effectiveness of employee time.

Certified Safety Professional with over 20 years experience, in multiple industries, including oil and gas, medical, transportation, environmental and manufacturing.

Electrical Engineer / Site Engineer / Supervisor / Draftsman

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 [ 66 ] 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out