Resume - Power Plant Mechanical Engineer / Site Supervision of Mech. Work & Commissioning

Misco Jobs

Resume #15736

CONTACT INFORMATION:
View contact information...

EDUCATION:
South Bank University, London
B.Eng. (Hons) Engineering Systems Design (2nd Class Upper)
University of London
LL.B (First and Second Year)

MEMBERSHIP:
Graduate Member of the Inst. of Mechanical Engineers, London
Graduate Member of the Inst. of Measurement and Control, London
Graduate Member of the Board of Engineers, Malaysia

WORK EXPERIENCE
Current Employer: MINCONSULT SDN BHD (1997 to Present)

Seconded to TEPSCO (Japan) Ltd. (March 2002-Present)
Tuanku Jaafar Power Station Rehabilitation Project (750 MW Combined Cycle Power Plant)
Contractor: Mitsubishi – Mitsui Consortium
Position: Combined Cycle Engineer (Site Resident Mechanical Engineer)
Responsibilities: Review of Drawings, Site Management with regards to installation of Mechanical equipment etc. Gas Turbine, Gas Turbine Generator, Steam Turbine, Steam Turbine Generator and Heat Recovery Steam Generator package and balance of plant (inclusive of Water Treatment plant, Electrochlorination plant, Emergency and Black Start Diesel Generators, Effluent Treatment system, Chemical Dosing system, Service Air system, etc.)

Seconded to ARIF TENAGA SDN BHD (March 2001 to December 2001)
11kv Cabling Works in Kulim Hi-Tech Park
Position: Project Engineer/ Deputy Site Manager

- Administration and Execution of Works.
- Liasing with Authorities inclusive of Approvals

Seconded to TOSHIBA CORPORATION [Main Contractor] (June 2000 to Feb 2001)

Rehabilitation of Gresik Steam Power Plant Unit 2 - Indonesia.
Position: Project Engineer / Deputy Site Manager
- Project Engineer and Deputy Site Manager for Main Contractors (Toshiba Corporation).
- Administration of boiler refurbishment and steam turbine re-blading contract between ALSTHOM and Toshiba.
- Monitoring of equipment shipping and site work progress.
- Administration & coordination among the parties concerned including owner, consultant (TEPSCO), ALSTHOM and Toshiba Corporation.

MINCONSULT SDN BHD (1997 to Present)
Position: Mechanical Engineer
Contractor: Peremba-Kentz Consortium
180 MW Power Development Project, Karambunai, Sabah
4 x Frame 6 Gas Turbine Combined Cycle Conversion project
- Involved in the coordination and preparation of the Tender Documents.
Tuanku Jaafar Power Station Port Dickson, Rehabilitation Project - Phase I - 750 MW Combined Cycle Power Plant
- Involved in the preparation of the Design Concept Report.
- Involved in the coordination and preparation of the Tender Documents.

Kulim Hi-Tech Park Independent Power Utility Project, Kedah 450 MW Combined Cycle Power Plant

Phase 1
- Review of P&I Drawings and General Electric supplied equipments. Involved in all coordination activities for obtaining the statutory approvals.

Phase 2
- Involved in the preparation of Functional Technical Specification for HVAC and Fire Fighting Systems.

Gelugor 330MW Combined Cycle Power Plant Upgrading Project

- Involved in the preparation of tender document.
Proton City Development Corporation
- Involved in the preparation of feasibility report for a Captive Co-generation Power Plant.
- Involved in load survey activities for evaluation of data collected from PCDC vendors.

120 MW Power Development Project, Karambunai, Sabah
4 x Frame 6 Gas Turbine based open cycle power plant

- Involved in the evaluation activities and review of Isometric and P&I Drawings.
- Involved in the preparation of bill of quantities for piping, fittings and valves.
- Involved in the preparation of documents and coordination activities for submission to Department of Health and Safety.
- Assisting Senior Engineers on all on-going activities to obtain ISO 9001 certification for the company.

Cyberjaya Flagship Zone (Project Management)

- Assisted in development of the Financial Modelling for road works.
ISO
- Project Quality Engineer for Tuanku Jaafar Power Station Project for the implementation of company ISO procedures

COMPUTER SKILLS
Fully versatile in Microsoft Excel Programming, Microsoft Word and Microsoft Power Point (for presentations purposes). Basic Modula-2 (Pascal Based) programming experience.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1951 to 2000 of 4812)

Go to Search Parameters...

Brief Description

Proficient in Document Management System & Secretarial Functions

Mechanical Engineer with 3 years of experience in electrical instalations

B.E Civil - 2001

Has been working for an EPC company for eight (8) years with experience in handling such projects of different magnitude both Onshore and Offshore, from grass roots to revamps, tender, FEED (Front End Engineering Design) then to engineering & procurement. Knowledgeable in INtools.

Senior Electrical/Design/Project Engineer for HV and MV substations

Proficient in drafting submittals (2D & 3D) and/or shop drawings prior for construction up to As-built Drawing. Multi-disciplined: Architectural, Structural, Mechanical (including Plumbing & Piping, HVAC, and Fire Fighting), Electrical (including Lighting, Grounding, Telephone & Data, Fire Alarm, a

About eight years of solid experience in designing and implementation(execution) of structural works

Reviewing the scope of work & technical specifications, checking detail projects schedule plan for construction and delivery of equipment, analyzing the projects progress and monitor the site progress and look after the safety and quality issues and more.

A 34 year old project manager with 14 years experience in mechanical, industrial and commercial projects. 15 years experience in all realms of contract engineering & QA/QC. Overseeing projects up to 36 million dollars. Project estimations.

Experience in Construction of Power House, Highway Roads, High-rise Buildings, Canals, Air Ports, Aero Bridge ,Delhi Metro Rail, Commercial and Residential Multi Story Buildings ,Water Tank, Guest House , Domes. Familiar with ISO 9001,ISO 14001 and Safety systems.

30 year old dynamic electrical power systems engineer available for immediate relocation.

Licensed Master Electrician, Licensed Electrical Contractor. 20 plus Industrial experience. Factory moving and inital setup experience seeking next project.

Heavy Equipment Operator

I am looking to get on the job training to become a construction project Manager, I believe once trained I will make an outstanding Manager

An international, multi-lingual, technically proficient Sales & Marketing professional

I wish to apply for the post of Supervisor Warehouse /Material Specialist or (Buyer) Procurement.

I have 28 years experience in finance, project control, scheduling and material control working on DoD projects and private sector manufacturing companies in and out of the U.S.

Position as Electro-Mechanical Designer. Open to full-time regular employment or long-term contract arrangement. Extensive experience on CADAM, CADRA and CatiaV4. Also experience with CADEX-CCD and AutoCAD 3-D Solid Modeling. Over 25 years experience.

Microsoft project, scheduling, budgeting, estimating, superintendent background

Construction Manager - Worked as Architect, Interior Designer and Civil Engineer

Application for the Post of Structural Designer/Project Engineer for building structures in your esteemed Company or for any position applicable to my qualifications.

Iam a diploma holder in Mechanical engineering with knowledge in autocad, Pro-e. Working as supervisor , engaged in fabrication & erection of pipelines.

Training and Supervision of Technicians, Quality Control, Sudying Chemical Engineering - Dipolma level, Soil, Asphalt and Concrete Testing (Lab and Field)

Certified Project Management Professional (PMP from PMI, USA) has extensive experience in technical, commercial and quality management aspects of the construction projects.

Diploma of associate engineer

Diploma Civil Engineering

AutoCAD Operator

I have a degree in Mechanical Engineering and a Post Graduate Diploma in Business Studies. I have attainded courses in Health Safety & Environment , Sales/Princples & Strategies etc. I have also worked as a Sales Engineer and Area Sales Engineer respectively. Proficent in use of micro soft office

I was graduated in Bachelor of Science in Mechanical Engineering and my work experiences was in the field of QA/QC in construction of district cooling plant with two years in refinery construction and currently working as a Mechanical Inspector in a consulting firm.

Journeyman I & E Technician: Plant-wide installation, start-up, loop check, calibration, troubleshooting, repair, and maintenance of instrumentation and electrical systems on high pressure gas-fired boilers (produce 250lb. & 900lb. steam flow), turbo-blowers, and water-treatment facilities.

Mr. Papanna has more than 5 years diversified engineering experience in the process, petrochemical and power industries. These duties included developing specifications and requisitioning equipment, performing technical evaluations and making recommendations for purchase, and specifying all testing

•Awarded department fellowship to pursue graduate studies. •Secured fourth place in undergraduate engineering. •Skilled in working with IMEX (CMG's reservoir simulator) and E100 (Eclipse simulator). •Received four promotions in a span of three years. •Prepared pipelay/installation reports

I am holding B. Sc in Quantity Surveying from University of Moratuwa, Sri Lanka. I have over eight years employment in the construction industry as a Quantity Surveyor. Employed by International Contractors

Have experience Road Design, MXROAD Software and AutoCAD Software. Total experience 7 Years 11 months in Road Department.

Monitoring and Scheduling the Projects

I have Diploma in industrial safety ASNT LAVEL II RT UT 3. QMS ISO 9001-2000 Internal Auditor Course BY TUV India Pvt Ltd and having a nine years experince in construction civil as well as mechnical five years with thired party inspection agency

Mechanical Subjects Lecturer & Senior Engineer in an Industrial & Commertial Projects

Power Plant Mechanical Engineer / Site Supervision of Mech. Work & Commissioning

Manufacturing Engineering Expert with 8 years of Experience in Tooling / Manufacturing Arena, Post Graduate in Mechanical Engineering & Management

Maintenance, Computer Hardware, Calibration,

Knowledge of design and analysis of steel and concrete structures. Special knowledge of finite element analysis(GTSTRUDL/SAP2000). Experience with all phases of building projects from drafting and design to execution and inspection.

PLANNING , MOETHODS MAINTENANCE ENGINEER

Qualification : Diploma in Civil Engineering, Professional Skills : Planning & execution of works as per the drawings & client/company’s requirement. Quantity Surveying, Billing, Man Management, Material Procurement, Labour control & over all Supervision of work.

Health & Safety Inspections (OSHA, MSDS)

15 Years experience in Construction and Mining. Qualified Diesel Mechanic with Supervisor and Foreman skills.

Having more than 8 years of extensive professional experience in project management, construction supervision of internationally aided highway projects including major and minor bridges, cross drainage structural works, assuring the quality of construction as per the approved drawing etc

Fresh Graduate Quantity Surveyor

I am a self motivated industrious candidate and also a fresh graduate from Sheffield Hallam University and graduate with the course of (Bsc. Hon) Building Construction Management, I¡¯m seeking for job placement with the post of Project Executive.

Pipe design, P&IDs and autocad

Experienced domestic and international project manager. Well versed in project management and cost management best practices coupled with delivering successful project and software implementations.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 [ 40 ] 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out