Resume - Engineer with well developed analytical and research skills. Possessing expertis...

Misco Jobs

Resume #15824

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
Engineer with well developed analytical and research skills. Possessing expertise in Electrical Demand Forecasting, Power Flow Analysis, Fault Analysis, Stabilities Studies and Economic Load Dispatch. An innovative, dynamic, confident and articulate individual with good organizational and interpersonal skills.

OBJECTIVE:
Expect to work for a company that is impartial and fair to all employees, posses the resources that ensures growth and knowledge in the execution of ones objective. Which is to increase the reliability of load flow data via validation of network diagram, parameters, calibration of load flow programs, stability modules and finally the optimization of contingency analysis and Power flow.

WORK EXPERIENCE:
Generation Technician Engineer, June 2001 - Present
System Planning & Control Division
Jamaica Public Service Company (A subsidiary of Mirant International)

Responsibilities include assisting in designing reports and databases to track critical information such as heat rate, force outages, perform forecasting of daily system load, assist in performing case studies on operational issues, assist in preparing annual and weekly fuel budgets, assist in developing weekly and daily unit commitment schedules, prepare dispatch reports for Independent Power Producers, Utilizes knowledge of Independent Power Producers Contract, Uses SCADA/EMS applications in executing duties, assist in identifying and trending parameters(e.g. Heat rate and forced outage rate)critical to the company's profitability, Update running hours for the generating units and preparing merit orders. The job function also entails scheduling and coordinating of planned outages,

Insurance and claims and also advises Power Purchase administrator on how Independent Power Producers operating.
Presiding officer
General Election 2002
Electorial Office of Jamaica
St. Andrew North Western

Associate (June 2000)
K-Mart
Rio Grande
New Jersy

Associate (June 2000)
WaWa Food Store
Cape May
New Jersy

Assistant Trucker (June 2000)
Sea Shore Foods
Rio Grande
New Jersy

Earn and Study Student (1998-2000)
Marketing Department and Faculty of Engineering
University of Technology
Kingston Jamaica

EDUCATION & CERTIFICATION:
* Bachelor of Engineering Degree (BENG HONS)
University of Technology 2002-2004
* Diploma Electrical Power Engineering
University of Technology 1997-2000
* Certificate Electrical Power Engineering
University of Technology 1997-1998
* Certificate Introduction Micro-computer Applications
Institute of Business and Professional Studies 1996
* Ordinary Level:
Five (5) C.X.C General Proficiency Examination, three (3) Cambridge O' Level and one (1) Cambridge AO' Level Examination at the Titchfield High School, 1990 - 1997

ADDITIONAL INFORMATION:

AWARDS
Part Scholarship from the Jamaica Public Service Company Summer 2004
Bursary from Student Loan Bureau 1999
Other Training and Certification

- Corporate Conduct and Social Behaviour, JPSCo Training Dept.
- Motivation – The key to improved performance and productivity, JPSCo Training Dept.
- International Coaches Clinic 2000, Jamaica Basket Association (J.A.B.A)

EXTRA CURRICULAR ACTIVITIES
Playing Chess, Football, Basketball, Table Tennis, Swimming, Weight lifting, Meeting and Socializing with new people, Public Relation Officer for Portland Basketball Association and also Listening to Music.

SKILLS
With regards to the following, my competence ranges from proficient to very experienced.

Mathematical Programming: Matlab
Traditional Programming: C++
Industrial Programming: PLCs (Programmable Logic Controllers)
Simulation Tools: Eracs Load Flow software, Wescouger Unit commitment and Economic Dispatch Software
Application Software: Microsoft Office
Operating Systems: Windows, DOS

INTERESTS
Artificial Intelligence & Neural Networks
Mind Enhancement
Reading Motivational Materials
Socializing and interacting with people
Playing Chess and Soccer

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2501 to 2550 of 4754)

Go to Search Parameters...

Brief Description

Inspection of Oil & Gas, Refinery, Petrochemical plant and offshore field Static equipments, Welding, piping, pipelines, painting& coating and NDT.

Transformational Human Resources Manager with strong business orientation and multi-site experience in a broad range of HR Generalist functions including recruiting, staffing, talent development, HRIS, organizational development, staff management, and many others.

10 years of professional experience in commissioning trouble shooting and servicing heavy-duty diesel engines. Presently working as Senior Service Engineer, responsible for field service of Cummins Diesel Engines. I possess strong academic credentials and good communication skills.

An Entry level position within a growing industry that takes advantage of my electrical engineering education and skills.

A highly motivated, ambitious and systematic individual with exceptional interpersonal skills •Presently doing Masters in Mechanical Engineering with one year of full time experience as Design Engineer working on PRO-E.Proficient in Pro/Engineer 2000, Wildfire, Pro/Mechanica.

Strong structural engineering knowledge, Energitic, Good analitycal thinking, Self motivated, Hardworking, Dedicated person, Able to work under pressure.

LARGE AND STRATEGIC PROJECTS MANAGEMENT - BUSINESS AND OPERATIONS MANAGEMENT

Senior mining professional with global risk management experience identifying and managing risk in mining operations and related construction projects

Mechanical Engineer,masters in Engineering Design,CATIA V5,SOLIDWORKS

Qualification: Diploma In Civil Engineering(3Years), Over 11 years experience in Land surveying, the majority of which has been spent gaining experience of Surveying works using modern surveying equipments and Surveying software.

B-GAS LEVEL II PAINTING INSPECTOR.MORE THEN 15 YEAR EXPERIENCE IN INSPECTION FIELD.

5 yrs experience in crushing & asphalt operation,maintenance,motor control centre,inventory control,switchgear.

2D and 3D cad applications - upstream and downstream experience

12 Years experience in civil engineering, design, procurement, construction & supervising of particular relevance to the project are as follows :

10 Year Experience, 5 years Implementing SAP FI/CO and BW / BI / Netweaver Solutions for Banking, Manufacturing, Sea port industry, Maintaining SAP BW Solution for Oil and Gas Industry

Heavy Equipment Operator to include Mobil Cranes, Crawler Cranes, Overhead Cranes, Forklifts, and Tractor/Trailer

Quality control, Inspection, Installation/erection of pipes and piping components, HVAc, HSE, Computer literate

Graduate Mining Engineer with MBA & First Class Mine Manager's Certificate having 22+ yrs. Hard Rock Large Highly mechanised hands on experience in Mine Operation, Drilling & Blasting, Mine Planning, Contracts Management, Waste Dump & Haul Road, Mine Dewatering

Junior project manager

Scheduler, Primavera P3E & Expedition

Land surveying relating to boundaries, design, construction, and mapping.

Jouryneyman Millwright - Alignment Specialist - Lazer, Reverse and Rim& Face. I have installed and rebuilt steam and gas turbines, crushers,conveyors, ball and sag mills, tower mills, pumps, compressors, blowers.

12 years experience in all aspects of telecommunications. Excellent written and communication skills. Highly organized. Ability to work on multiple assignments. Excellent problem solving skills. Able to meet deadlines and schedules. Start of to completion of projects to include ordering, insta

Motivated, proven performer with a 17 year record of demonstrated success in Operations Management, Project Management, Distribution/Logistics Management, and Mechanical Engineering across multiple fields from Military Operations, Municipal Management, Telecommunications, Software Development, Call

I am a BS Mechanical Engineer who had served primarily as a Senior Fire Protection-Applications and Design Engineer for around 17 years plus and 5 years as an Occupational, Health and Safety practitioner in a petrochemical industry with a primary function as Fire Safety Engineer. My specialty profe

Business planning, estimating, planning and scheduling, cost control and reporting, contract management, earned value, productivity monitoring, claims disputes and resolution, lean construction, high level presentations, multi tasking, meeting deadlines, and creating win-win situations.

20 years of experience (Eight year in Gulf) in varied discipline of Engineering i.e. Quality Control and Assurance, Inspection and Expediting, Piping Specification, Material Handling equipments & system specification, Shutdown maintenance Inspection, Construction Site Inspection(Piping,PV)

Experienced frame and finish carpenter with cabinet experience and management experience

Engineer with well developed analytical and research skills. Possessing expertise in Electrical Demand Forecasting, Power Flow Analysis, Fault Analysis, Stabilities Studies and Economic Load Dispatch. An innovative, dynamic, confident and articulate individual

I have electrical trade certificate holder, and I have more than ten years of experience in maintenance, installation, repair, fault finding of electrical equipment, laying UG cable to connect main switch gear, and maintenance of HT LINE transformer line

A graduate in biomedical engineering with over 5 years of experience in Medical equipment planning, procurement, design assisstance, primary level maintenance in Health Care/Hospitals and developing Management Information System of Biomedical Department

Mechanical Engineer, pipe stress, pressure vessel, compress, caesar

1) Graduate in Mechanical Engineering with 12 years experience in Construction Planning in the power, petrochemical, oil & gas, chemical and industrial sector 2) Proficient in Primavera, MS Project, 3) Strong project management, technical, communication and leadership skills

Ten years experience in Mechanical engineering / Project Engineering of EPCM companies.

I have eight years experience in major civil works projects such as,bridges and metro rail projects.

I am a highly experienced and skilled senior service person. I have many years experience as a expatriate including working in what are considered 'hardship' postings. I am Caterpillar dealer trained, but have recently been working in open cast mines, both coal and gold, in Africa and Asia.

I am HSE professional having work experience of chemical industry and drilling , my education level is masters also completd courageous leadership course in health and safety,management of change, IOSH managing safely,ISO internal audit course,OSHA 18001 internal audit course.

Document Controller, Coordinator, Hr, Admin, IT

High-energy administrative, dependable professional with good judgment and wisdom. Excellent knowledge of principles and procedures for personnel recruitment, selection, training, compensation and benefits, HR information systems, human resources modeling, leadership technique,

Over 17 years of rich & effective experience in Instrumentation maintenance of DCS based controls & instrumentation. Core competence in installation & commissioning field instrumentation, design & logics/programming of DCS / PLC- Honeywell make & Modicon make

E&I Superintendent with a broad spectrum experience of electrical, instrument, and mechanical engineering acquired throughout a thirty year career. 27 years of my experience represents working directly for the Client within the O&G industry, on multi-discipline task force projects, including PMT.

QC, NDT, PIPING & WELDING INSPECTION, RTFI, MT, PT, PMI, FERRITE NO,H ARDNESS TESTING, PWHT, PRE HEAT, HYDO/PNEUMATIC TESTING, LINE CHECK, FABRICATION, ERECTION,C OMMISSIONING

Nineteen (19) years experience in the construction industry including two (2) straight years in Saudi Arabia with an outstanding performance. Exposed to various fields (Construction of Roads & Bridges, Hotel, Residential, Commercial and Industrial buildings including Oil & Gas Industry) in Civil En

To work at Corporate Level with Hard Work & Honesty

Versed in Production and Manufacturing of MIG wire as well as hands on experience in Planning and Manufacturing for turnkey Projects.

Diploma in Quantity Surveyor

Focused well-defined skills in engineering, program/project management, industrial and commercial construction, financial systems, profit and loss, proposals and negotiations.

Recruitment Specialist/HR Generalist

SDS2, Xsteel, AutoCAD Steel Detailer.

First Prev [ 51 ] 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out