Resume - 20 years in Oil/Gas in Eng. ,Procur.and Construction including Piping Design in ...

Misco Jobs

Resume #1590

CONTACT INFORMATION:
View contact information...

Summary of Experience

More than 20 years in Oil and Gas Industry and Tank Farms in the fields of Engineering, Procurement, and Construction Supervision for On-shore Projects.
Extensive Experience in Piping Design in accordance with international codes such as API, ASME/ANSI, ASTM, and NFPA Standards.
Design of Piping layouts, Isometric Drawings, Material take off, Pipe Supports and Stress Analysis Calculation.
Experience in Tank Design in accordance with API Standard 650
Preparation of Terms of Reference (TOR) for Conceptual, Basic, FEED, and Detailed Engineering.

Consultant Bid Technical Evaluation and Clarifications.
Extensive Experience in Procurement Technical Services.
Preparation of Enquiry Packages and Material Requisitions for Process Equipments and Piping Material including Technical Specifications and Data Sheets.
Bid Technical Evaluation, Clarifications for Vendor Offers and Vendor Support.
Experience in Construction Supervision, preparation of Piping Spool Sheets and Work Shop Drawings
Management of Engineering Staffs in Multinational and International Environments
Conversant with ARAMCO and SHELL DEP Specifications
Computer Skills including the following Software's:-
CAESAR II for Piping Stress Analysis Calculation.
PIPENET for Flow Analysis (Pipe Sizing and Pressure Drop Calculation).
Microsoft Office.

Summary of Main Jobs.

* From Juli,2003 till now for Abu Dhabi Company for Onshore Oil Operations (ADCO)
Senior Mechanical Engineer in the Engineering & Major Projects Department.
* From December 2002 until July 2003 for Pan Emirates Engineering Lmtd. Abu Dhabi as Mechanical/Piping Head of Department.
* For Consolidated Contractors Company (CCC), Saudi Arabia for 3 years as Project Chief Office Engineer Managing the Engineering Staff on the Field.
* For Petrolem Projects and Technical Consultation Company (PETROJET), EPC, Egypt for 14 years as Piping Design Dept. Head, Senior Piping Material Engineer, Senior Piping Design Engineer, and Piping Construction Engineer.

Experience History:

¨ From June, 2003 to Date for Abu Dhabi Company for Onshore Oil Operations (ADCO) As Senior Mechanical Engineer in the Engineering & Major Projects Department Supporting technically all Major Projects in Jebel Dhanna Terminal and Tank Farm ( the Main Oil Export Terminal in Abu Dhabi)
Main duties as follow:-
1) Review, comment and Approve consultant Engineering Deliverables such as Project Specifications / Data Sheets., Piping / Mechanical Drawings, Material Requisitions and Engineering Calculations.
2) Preparing Scope of Works / Terms of Reference for new Projects.
3) Prepare engineering works for PMRF"s (Plant Modification Request Forms) including Drawings, Specifications, Data Sheets and Bill of Material.
4) Consultant/ Contractor Bid Tech. Evaluation.
5) Technical Support during Project Construction, Answering Clarification raised by Operations /Contractors during Construction Phase.

6) Vendor Bid Technical Evaluation/ Clarification for Project Material such as Piping Material, Valves, mechanical/ Process equipment, i.e. Pumps, Compressors, Tank Seals, Mixers, Roof Drain System and fixed Foam System

Main Projects: -
1) Tank Farm Facilities ( Oil Piping, Fire water System, Closed Drain System ) Upgrade Project at Jebel Dhanna Terminal
2) Refurbishment of One Million Barrel Floating Roof Tanks at Jebel Dhanna Terminal
3) Preparation of Terms of Reference for Conceptual and for Basic/ FEED Engineering for Jebel Dhanna Tank Farm Extension (Two Additional Floating Roof Tanks of One Million Barrel) including facilities ; Filling / Loading Lines, Fire Water Main and Closed Drain System.

From January, 2003 to June, 2003 for Pan Emirates Engineering Ltd., Abu Dhabi
As Piping/Mechanical Head of Department.
Main duties as follow:-
1. Piping & Mechanical Detailed Engineering
2. Preparation of PC Tender Documents and Construction Packages
Main Projects: -
1) Installation of Side Entry Mixes on new 30" Nozzles for GASCO Tanks 6D-151A/B
2) Shah Infill Wells Project (Sy-040, Sy-041, Sy-042, Sy, &043) for Abu Dhabi Company for Onshore Oil Operations (ADCO).
3) Asab Artificial Lift (Wells (Sb-052, Sb-107&Sb-135) for Abu Dhabi Company for Onshore Oil Operations (ADCO).

¨ From March 2001 To December 2002 for Private Consulting Engineering work in Oil and Gas industry in Egypt

¨ From December, 1999 To February, 2001 for CCC( EPC Company) as a Chief Office Engineer in Hawiyah Gas Plant Project, Saudi Arabia managing Engineering Section on Field for the Following Duties:-
1) Piping Isometric Detailing, Spooling, and Reporting of B.O.M. using Taliso / Talisman Programs.
2) Piping, Pipe Supports Equipment, Structural Steel Material Control, and Release to Fabrication Shop and Field.
3) Issue for Fabrication Spool Sheets and Workshop Drawings for Pipe Supports and Structural Modification.
4) Pipe Supports and Structural Steel Material Procurement for CCC Scope of Supply According to Project Technical Specifications and Armco Standards.
5) Control of Field Erection Material and Release for Construction using Talisman Program.
6) Preparation of Field Valve Testing lists Providing Hydro test Requirements for each Valve According to Project Specification and Applicable Codes and Release Valves for Testing as per Project Requirements and Aramco Standards.
7) Engineering changes and revisions control and issuance of modifications to Fabrication Shop and Site.
8) Control and checking of field RFI's and Issuance of RFI's for Engineering mismatches between P&ID, GAs, ISOs Drawings, Project Specification, and Aramco Standards.
9) Splitting and Issuing of Test Packs for Project Testing Systems, Control and Updating Test Packs for all modifications.
10) Issue As-built drawings for all disciplines.

* From December, 1997 to November, 1999 for CCC as a Chief Office Engineer in Yanpet Ethylene Expansion Project in Yanbu, Saudi Arabia leading the Engineering Department on Field for the following duties:-
1) Piping Isometrics Checking, Spooling using TALISO Program.
2) Preparing detailed Workshop drawings for Pipe Supports and Issue Material Requisition for Standard Pipe Supports.
3) Piping & Pipe Support Material Control using Talisman Program.
4) Issue Piping Spools and Pipe Supports for Fabrication and Erection.
5) Split Project Turnover System to Test Systems and Issuance of Test Packs to QC Dept.
6) Checking Project Engineering Documents such as P&ID, Line List, ISO's and GAD.
7) Control and Issue RFI's for Engineering and Site Problems.
8) Get Approval for Accepted Material Substitutions to Increase Fabrication / Erection Progress.
9) Control Project Specifications and Spec Waiver Issues.
10) Creating ISO Drawings, Specifying Branch Connection for Pipe Rack SFR's.
11) Field As-Building P&ID's and Isometrics.

* From August 1996 until December 1997 for Petrolem Projects and Technical Consultation Company (PETROJET), EPC, Egypt as a Project Office Engineer in Ammonia / Urea Fertilizer Abu Qir III (Mech.) Project in Alexandria.
Duties as follows:
1) Project Contract and Correspondence
2) Project Technical Documentation
3) Project Quantity Surveying, Cost Control and Preparing Monthly Invoices.
4) Piping Isometric Workshop Drawings.
5) Project Work Progress Calculations.
6) Project Material Control and Material Procurement.

* From 1989 till August 1996 for Petrolem Projects and Technical Consultation Company (PETROJET), EPC, Egypt, Head Office (Cairo) as
Piping Design Dept. head.
Main duties as follows:
1) Process Piping Systems Engineering including Pipe Sizing, Pump Head, and NPSH calculation using Pipenet Software.
2) Piping Detailed Engineering including Piping Arrangement Plans and Piping Isometric Drawings.
3) Piping Stress Analysis Calculations using CAESAR II Software.
4) Preparation of Project Bill of Material
5) Preparation of Project Material Specifications for Process Equipments, Piping Material, Valves, Pumps, Plates, etc. According to International Codes API, ASME, ANSI, ASTM, etc...
6) Material Inquiry Technical Packages preparation.
7) Vendor Bid Technical Evaluation/ Clarification.
Main Projects: -
1) Expansion of Sumed Storage Capacity at SIDI KRIR Terminal (Alex.)
Duration: November 1994 to August 1996
Duties Include the Following: -
* Engineering and Supply of 6 X 120,000 M³ New Crude Oil Floating Roof Tanks and related 48" Process Piping Network (about 6km) and Hydraulic Operated Ball and Gate Valves.
* Engineering and Supply of New Boosting Pump Station with Total Capacity 3 X 4600 M³/HR.
* Engineering and Supply of Fire Fighting System (24" Main Ring).
* Engineering and Supply of 12" Oily Sewer System including Oily Sewer Pumps.
* Engineering and Supply of 20" Surface Drainage System.
* Engineering and Supply of 2" Hydraulic Oil System.
2) Extension of ASSUIT Refinery Storage Capacity
Duration: 1992 to 1994
Duties Include the Following:
* Supply of New 15,000 M³ Kerosene Fixed Roof Tank.
* Supply of New 5,000 M³ Naphtha Floating Roof Tank.
* Supply of New Cooling Tower.
* Supply of New LPG Cigar Tank.
* Engineering and Supply of Related Process Piping Networks including Pump Stations.
* Engineering and Supply of Fire Fighting System (24" Loop).
* Engineering and Supply of Sewer System.
3) Extension of ASSUIT Refinery Storage Capacity
Duration: 1991 to 1992
Duties Include the Following:
* Supply of New 55,000 M³ Crude Oil Floating Roof Tank.
* Supply of two New 33,000 M³ Fuel Oil Fixed Roof Tanks.
* Engineering and Supply of Process Piping Networks including Pump Stations.
* Engineering and Supply of Fire Fighting System (24" Loop).
* Engineering and Supply of Sewer System.
* Engineering and Supply of Steam and Steam Tracing Lines for Fuel Oil Lines.
4) Upgrade of Sumed Storage Capacity at Sumed Terminals SIDI KRIR (Alex.) and EIN SOKHNA. (SUEZ)
Duration: 1989 to 1991
Duties Include the Following:
* Engineering and Supply of 4 X 100,000 M³ New Crude Oil Floating Roof Tanks and Related 48" Process Piping Network and Hydraulic Operated Ball and Gate Vales.
* Engineering and Supply of Fire Fighting System (24" Main Ring).
* Engineering and Supply of 12" Oily Sewer System.
* Engineering and Supply of 20" Surface Drainage System.
* Engineering and Supply of 2" Hydraulic Oil System.

* From 1987 until 1989 for PETROJET Head Office (Cairo) as a Piping Material Engineer in Tech. Sector.
Duties as follows:
1) Develop of Project Materials Specifications for Equipment, Pumps, Pipes, Piping Fittings, Valves, Plates, etc. According to International Codes API, ASME, ANSI, ASTM, etc...
2) Develop of Technical Packages for Material Enquiries and Purchase Orders for Petrochemical projects.
3) Vendor Bid Tech. Evaluation/ Clarification.
4) Tendering and Cost Estimate.
Main Projects: -
1) Upgrade of Sumed Storage Capacity at Sumed Terminals SIDI KRIR (Alex.) and EIN SOKHNA (SUEZ)
2) Green Beach and EL-Zahraa Tourist Villages Supply of PVC and Galvanized Piping Valves for Water Pumping System.
3) GPC Platforms Material for Two Platforms including Pipes for Piles, Jackets, Decks, Sheet Plates and Sections approximately 1800 ton.

¨ From 1986 until 1987 for PETROJET (EPC Company) Head Office (Cairo) as Piping Design Engineer
Duties as follows: -
1) Process Piping Systems Engineering including Pipe Sizing, Pump Head, and NPSH Calculations.
2) Piping Detailed Engineering including Piping Arrangement Plans and Piping Isometric Drawings.
3) Piping Stress Analysis Calculations.
4) Specifying Project Materials and Equipment like Pipe, Piping Fittings, Valves, Pumps, Boilers, Plates, etc.
5) Material Inquiries Issue.
6) Vendor Bid Tech. Evaluation/ Clarifications
Main Projects: -
ASSUIT Cement Factory Fuel Oil Facilities, Barge Unloading Facilities for Fuel Oil, Unloading Pump Station, Steam Boilers, Water Treatment Plant, Transfer Pump Station, and 12Km 12" Insulated Pipeline to Cement Factory.

* From 1984 until 1986 for PETROJET as Piping Construction Engineer in SUCO ZEIT Bay Project.
Worked as Piping Construction Engineer for the following duties:-
1) Fabrication of piping spools according to isometric drawings and Fabrication of Pipe Supports
2) Erection of piping spools according to P&ID, ISO's and GAD

¨ From 1980 till 1984 for SEBHA Construction Co. in Libya as a Construction Supervision Engineer for the Following Projects, which have been executed by European subcontractors: -
1) Fuel Tanks and Related Piping System
2) SEBHA Tourist Hotel Mechanical works

¨ From 1976 until 1980 in Military Service

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 101 to 150 of 4371)

Go to Search Parameters...

Brief Description

My experience in the Middle East and Philippines has developed an expertise of Building Services

Knowledgeable and experienced Design Procedures with 15 years road construction experience

Over 18 years in the government service as Fire Safety/Fireman/Arson Investigator in the Philippines

20 years in Oil/Gas in Eng. ,Procur.and Construction including Piping Design in accordance with international codes, Procurement Technical Services & Construction Supervision. Management of Eng. Staffs in Multinational and International Environments Conversant with ARAMCO and SHELL DEP Specs

Supervise DCC team consists of 8 document controllers & operators.

MBA Graduate in Finance & Accounting

Civil Marine, Dredging & Coastal Engineering. record: 70 projects

I am a highly experienced, qualified Safety Professional with an experience of 16 years at different countries like UAE, Qatar, India and Saudi Arabia.

Electrical Engineer Transmission Distribution Of Power Supply, DEsigns, Layouts., Operation & Maintenence of Grid substations upto 400 KV

Free! Construction Engineer/Manager-Pike Company, Rochester, NY

I have worked as an Engineer in several developing countries in different kinds of work and environments. My responsabilities have involved coordination and optimization of various projects which were developed at the same time through accurate preparation and administration.

Project & Construction Manager

B.E. with 22 years of experience in Highways, Industrial and Building construction, out of which 3 years in Saudi Arabia. The experience includes-

Civil construction

I have got masters degree & years of successful and practical experience in relevant fields such as lateral soil pressure, excavation, retaining wall, consolidation settlement, slope & embankment stability, and soft ground reinforcement & stabilisation.

Health Safety Environment Risk Mining Engineer

QA/QC construction Manager

License: Florida State Certified Building Contractor (1985 – Present

Having 17 years of work experiance in MEP construction feild willing to take up challenging job.

MBA HRM, BS Mechanical with specialized associate degree in Fabrication

I can do research work on solid mechanics

International Project Management for 5 and 6 Star resorts and golf course experience.

Loader Operator/Truck Driver

I am having more than 15 years of experience in Project Planning, Scheduling & Project control for EPC projects of MNC companies

Electric Engineer

International Project Management Residential Commercial Industrial

Dip Elect & Mech Engineering + LLB + MBA

B.Eng, Traffic and Transportation Planning and engineering, local area traffic management, transportation modelling, sidra, transyt, trips, bus transit, light rail route and station planning

Degree in renewable 3 years diploma in project management 2 years 30 years as an electrician with plumming experience

HND qualified UK educated Civil Engineer worked as freelance for many years and benefitted from the experience of many successful and poorly run contracts. Good liaison between all parties and understands the grass roots of operations and has high expectations. Can set out.

FCC General Class Radio-telephone Operator's (GROL) License, TS/SSBI Security Clearance,Electronics Troubleshooter, Experienced LMR Technician, Field Service, R&D.

Hydropower

Higher level civil management experience

Directing Large Engineering Teams.

VERY GOOD EXPERIENCED IN CIVIL ENGINEERING AND CONSTRUCTION PROJECTS SUCH AS CONSTRUCTION OF BUILDINGS, ROADS, HOUSES AND HOSPITALS.

What ever it takes to get the job done

Coordinates and controls project construction of continuous inspections of work progress for quality, workmanship and conformance with plans and specifications. Preparation of required concrete design Mix. Supervise the allotted laboratory programs to technicians. Prior inspection of Hollow core bed

Accounting Manager -Acting Finance Manger-Regional Chief Accounting -Credit Manager

Heavy Equipment mechanic with 30 plus yrs experience

I offer over twenty five years of professional employment and education in the civil engineering field. I have vast experience working with computers, horizontal and vertical concrete projects and managing multiple projects at the same time.

An interior designer, now in execution of interior fitout projects. Experiance of 14 years in 5 star hotels, restaurants, offices etc.

Diversified experience in Civil and Architectural engineering discipline gained in seventeen (17) years, from working with various international consulting and construction companies in the Philippines, Saudi Arabia and State of Qatar.

I am a qualified B.E (Civil) with over 18 years¡¦ of experience in Project Management,Site Administration, Construction Management. Over the years I have acquired all the necessary experience of working at all levels with client, consultants & main contractors. Deft in swiftly ramping up projects in

Above 14 years of worked experienced in Instrumentation and Electrical Control System overseas in a Reputable International Construction Companies. Supervision, Erection, QA/QC Inspection, Start-up, Commissioning and documentation works. Review Design and technical responsibilities for good quality,

Distinguished record of accomplishment with strong leadership, strategy/vision development, international business development, team building, and problem solving experience and always interested in taking on new challenges. Look for solutions opportunities in every challenge, and creative ideas fro

Bachelor of Environmental Design (Architecture) Graduate Diploma Urban Design. Experience in Civil Engineering Road Concept design and masterplanning layouts, major retail development roads and car parking layouts. AutoCad Map 2008

Specialist in Piling, Foundation and Ground improvement.

A higly adaptable professional of proven ability with extensive on-site experience in worldwide locations who offers: construction and civil works expertise, safety and QA/QC awareness

experience in marine construction of port and breakwater.

Design Manager, Residential construction superintendent, CAD design/drafter, and Manufacturing Engineering tech

First 1 2 [ 3 ] 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out