Resume - A qualified and internationally experienced Mechanical Engineering professional ...

Misco Jobs

Resume #1702

CONTACT INFORMATION:
View contact information...

EDUCATIONAL BACKGROUND
* Texas A & M University; Texas / U.S.A. Spring 99 - Fall 00
Mechanical Engineering, Graduate Program (Master of Science)
* Middle East Technical University; Ankara / TURKEY Spring 98 - Summer 98
Intensive English
* Kirikkale University; Kirikkale / TURKEY Fall 93 - Spring 97
Mechanical Engineering, Undergraduate Program

EXPERIENCES
10/2008 - present Site Manager (HRSG), INCO International FZ Co., Fujairah/United Arab Emirates
Project: Fujairah F2 IWPP (Independent Water & Power Project; 2000 MW Power & 130 MIGD Water)
Owner: Fujairah Asia Power Company (FAPCO)
Contractor: Alstom Switzerland Ltd. and SIDEM Consortium
Sub Contractor: INCO International FZ Co.
Plant Type: 2xKA26-2 MS and 1xKA26-1 MS CCPP + Desal
Scope of Work: Erection of 5 HRSG Units (Mechanical & Electrical).

Working as a Site Manager responsible directly to Project Manager.
My duties and responsibilities are as follows:

* Mobilization of Site and Camp Area
* Preparing the Manpower and Equipment requirements
* Direction and organization of 25 engineers (including construction managers) and ~500 workers (including foremen, crew and team leaders)
* Supervising the total construction effort to ensure that the project is efficiently and safely executed within quality, schedule and budget
* Interface with client representative and construction (sub) contractors
* Assisting the HSE team to ensure that safety plans and requirements are implemented and followed
* Assisting the business and project manager(s) in leading overall project and company objectives
* Supervising other managers who are responsible for logistics, HSE, administration, site resources, etc.
* Reporting to Project Manager and/or Home Office Designated Manager

*** won the "Safe Man of the Month (September 2009)" award
*** won the "Safe Company of the Month (July 2009)" award

06/2006-09/2008 Facility Manager, Binagadi Oil Company, Baku/Azerbaijan
Worked as a Facility Manager at Binagadi Oil Company (BOC), a production services firm in the oil and gas industry.
My duties and responsibilities were as follows:

* Direction and organization of 7 engineers and 60 workers (including foremen, crew and team leaders)
* Maintenance, repair, construction and erection of pipelines, storage tanks, pumps, compressors, separators, valves and sucker rod pumps
* Monitoring the contractor activities such as storage tank repairs, drilling location preparations and site road constructions
* Direction and organization of Daily Meeting with other disciplines
Also worked as Project Manager of the "Water Flooding Project".

09/2005-06/2006 Mechanical & Steel Group Chief, GAMA Al Moushegah Arabia Ltd., Jeddah/Kingdom of Saudi Arabia
Project: Shoaiba Steam Power Plant, Stage II, Phase I & II (6x367 MW)
Owner: Saudi Electricity Company (SEC)
Contractor: Alstom Power Inc (USA) and SARCO Consortium
Sub Contractor: GAMA Al Moushegah Arabia Ltd.
Worked as a Group Chief directly responsible to Construction Manager.

My duties and responsibilities were as follows:
* Direction and organization of 2 engineers, 130 steel erectors, 15 mechanical erectors, 15 boiler erectors and 15 pipe fitters (including foremen, crew and team leaders)
* Erection of GR (Gas Recirculation, 2 per unit), FD (Forced Draft, 2 per unit) and ID (Induced Draft, 2 per unit) Fans (total 6 per unit)
* Erection of Circulation Pumps (3 per unit)
* Erection of Condensate Pumps (2 per unit)
* Steel structure erection (including platforms, stairs, gratings and handrails) of boilers and Air Pre Heaters (APH) (~ 2350 tons per unit, total 3 units: phase I) + remaining steel, platform and stairs erection of Phase I & II boilers (6 units total)
* Steam Drum erection (~ 180 tons)
* Hoists Installation (9 per unit)
* Completion of Punch Items
* Shutdown works including boiler, piping and instrumentation

02/2005-09/2005 Chief Engineer, TPAO Turkish Petroleum Corporation, Ankara/TURKEY
Project: Kuzey Marmara & Deðirmenköy Fields Underground Gas Storage
Owner: Turkish Petroleum Corporation (TPAO)
Contractor: Lurgi AG – Fernas Insaat Consortium
Worked as Chief Engineer directly responsible to Construction Manager.
My duties and responsibilities were as follows:
* Direction and organization of 3 engineers and 30 technicians.
* Responsible for:
- Piping department
- Pipeline department
- Equipment erection (package units such as compressor units, HC dew point adjustment, dehydration etc.)

08/2001-02/2005 Project/Site Engineer, TPAO Turkish Petroleum Corporation, Ankara/TURKEY
Worked as Project/Site Engineer responsible to chief engineer at "Kuzey Marmara & Deðirmenköy Fields Underground Gas Storage Project".
My duties and responsibilities were as follows:
* Technical Committee Member for Contract Negotiations
* Checking and approval of calculations, design, manufacturing and erection projects of all process equipments
* Auxiliary Systems such as Drinking Water Treatment, Waste Water Treatment, Fire Fighting Systems, Water Supply etc.
* 3x10 MW + 5MW Gas Turbine driven Centrifugal Compressor Packages
* HC Dew Point Adjustment Unit
* Checking and approval of Pipeline Procedures (16"x13 km, 20"x3.5 km and 6"x1 km), Alignment Sheets and Crossings, also control the construction of pipelines
* Piping, Slug Catchers and Inlet Filters
* API and ASME Tanks, manufacturing & construction and hydrotests
* Checking and approval of design & construction projects and calculations of HVAC & Plumbing Systems also control the construction of the systems
* Control of Steel Structure Fabrication and erection
* Control of Process Equipments manufacturing, tests and erections
* Training of entry level Mechanical Engineers and technicians to adapt them to the project
* Preparing monthly "Activity Reports" to be submitted to General Directory of Petroleum Works
* Following up and translating of the "Monthly Progress Reports" that are submitted by the contractor
* Checking the "Interim Payment Certificates" that are submitted by the contractor and writing the payment letter to the Financial Department of Turkish Petroleum Corporation
* Translating the necessary documents of the project

02/2001-08/2001 Surface Facilities Engineer, Turkish Petroleum Corporation, Ankara/TURKEY
Worked as a surface facilities engineer at the International Projects Department
Training in Thrace Region Oil and Gas Fields (15 days)
Training in Batman Oil and Gas Fields, Dodan CO2 Production Process (45 days)
Training at Onshore Drilling for 1 week

09/1997-08/1998 R&D Engineer, STS Tesisat Armaturleri San. Tic. A.S., Kirikkale/TURKEY
Worked as R&D engineer at R&D Department
My duties and responsibilities were as follows:
* Creating 3D Models using AutoCAD14.
* Designing new products (valves) and machinery such as lathe.
* Direction and organization of 20 workers and an engineer.

Summer 96 Intern, STS Tesisat Armaturleri San. Tic. A.S., Kirikkale/TURKEY
Worked at manufacturing and R&D Departments
Worked closely with senior engineers to develop new valves.

Summer 95 Intern, TUPRAS Kirikkale Oil Refinery, Kirikkale/TURKEY
Attended Work Safety & Fire Fighting Training
Practical training about basic machine tools such as lathe in the workshop

Worked with engineers to start up steam turbines of Thermal Power Plant
**** From January 2001 to September 2005, I worked for Kardelen Engineering & Consultancy Company, which is our family company, as a Technical Consultant for Engineering, Energy and Oil & Gas Industry and worked part-time for the site works with the permission of my official company TPAO Turkish Petroleum Corporation. The followings are the site works which I worked part-time for the Kardelen Engineering & Consultancy Company:

09/2004 – 10/2004 Site Manager, KARDELEN Engineering & Consultancy Company, Kirikkale/TURKEY
Project: 2004 year Engineering & Maintenance works of Kirikkale Oil Refinery
Owner: Turkish Oil Refineries Corporation (TUPRAS); Kirikkale Oil Refinery
Contractor: KARDELEN Engineering & Consultancy Company

Worked as Site Manager for the Engineering & Maintenance works of Kirikkale Oil Refinery during the Shut Down (S/D) and Battery Shut Down (BS/D) period.
Responsible for:
Direction and organization of 26 workers and an engineer for the equipment erection, piping, mechanical, civil, electrical works and hydrotests.

10/2002 – 04/2003 Deputy Site Manager, KARDELEN Engineering & Consultancy Company, Kirikkale/TURKEY
Project: Naphtha Filling Platform
Owner: Turkish Oil Refineries Corporation (TUPRAS); Kirikkale Oil Refinery
Contractor: KARDELEN Engineering & Consultancy Company
Worked as Deputy Site Manager for the construction (including steel fabrication) of Naphtha Filling Platform at Filling Facilities of Kirikkale Oil Refinery.

08/2002 - 09/2002 Site Manager, KARDELEN Engineering & Consultancy Company, Kirikkale/TURKEY
Project: Reconstruction of Heating & Plumbing System
Owner: Turkish Oil Refineries Corporation (TUPRAS); Kirikkale Oil Refinery
Contractor: KARDELEN Engineering & Consultancy Company
Worked as Site Manager for reconstruction of Heating & Plumbing System of the Kirikkale Oil Refinery's Apartment Complex.

08/2002-04/2003 Technical Consultant, Guneygaz Corporation, Kirikkale/TURKEY
Worked as Technical Consultant for Engineering, Oil & Gas and Energy Industry.

SKILLS
Hardworking, dedicated and resolute to take responsibility. Strong analytical thinking ability, communication skills, ability to work under pressure and capability of motivating others.

* Knowledge of PC, advanced user of Microsoft Applications and comfortable working with the following programs:
AutoCAD, ANSYS, Pro/E, ALGOR
* Hands on Experiences on Powder Processing

TECHNICAL TRAININGS and CERTIFICATES
* Working at Height Training; 07/10/2009 (Fujairah, U.A.E.)
* Fire Fighting Training; 19/06/2009 (Fujairah, U.A.E.) (have a certificate)
* First Aid Training; 12/06/2009 (Fujairah, U.A.E.) (have a certificate)
* Confined Space Training; 15/05/2009 (Fujairah, U.A.E.) (have a certificate)
* Training Course on Centrifugal Compressor for Operation and Maintenance; 15-17/03/2005 (Siemens AG; Duisburg, Germany) (have a certificate)
* Training Course on Gas Turbines for Operation and Routine Maintenance; 07-11/03/2005 (Solar Turbines; San Diego, USA) (have a certificate)
* CNC programming; Spring 1996 (1 term course and 1 week special practical training at Steel Factory of Mechanical & Chemical Industry Corporation (MKEK), Kirikkale/TURKEY)
* Pneumatic Training Course; 10-16/06/1996 (KOSGEB; Ankara/TURKEY) (have a certificate)
* Aeromodeling Beginning Course; June 1990 (Turkish Aeronautical Association, Areomodeling School; Ankara/TURKEY) (have a certificate, B)

ACTIVITIES
* 2002-present; Charter Member & First President of Turkey A&M Club
* 1999-present; Member of ASME
* 1997-present; Member of The Union of Chambers of Turkish Engineers and Architects (UCTEA) Chamber of Mechanical Engineers
* 1999-2000; Member of Trap & Skeet Club at Texas A&M University
* 1999-2000; Member of North American Fishing Club
* 1999-2000; Member of North American Hunting Club
* 1999-2000; Member of National Rifle Association

AWARDS
* won the "Safe Man of the Month (September 2009)" award
* won the "Safe Company of the Month (July 2009)" award
* Best fourth undergraduate degree: Mechanical Eng. Dep. of Kirikkale University, Kirikkale/TURKEY

SCHOLARSHIPS
* 98 – 00; from Turkish Petroleum Corporation (full scholarship to pursue a MS degree in USA)
* 93 – 97; from Turkish Ministry of National Education (full scholarship for undergraduate degree)

CREATIVE PRODUCTS
Thesis
* Ertekin, A. "Effect of Doping in Bi-Sr-Pb-Ca-Cu-O Superconductor Composites", Master Thesis, Texas A&M University, U.S.A. (2000)
* Ertekin, A. "Material Separation and Transportation by the Pneumatic Systems", Undergraduate Thesis, Kirikkale University, TURKEY (1997)
Posters
* Yavuz, M., Ertekin, A., O'Brien, T., McIntyre, P., Soika, R., Rathnayaka, K.D.D, Naugle, D., Hartwig, T.,Clearfield, A. "Solid Solubility Limit of Bi-Pb-Sr-Ca-Mn-O in Bi-Pb-Sr-Ca-Cu-O Superconductors", Applied Superconductivity Conference' 2000 Pavilion Center, Virginia Beach, VA
Publications
* Yavuz, M., Ertekin, A., O'Brien, T., McIntyre, P., Soika, R., Rathnayaka, K.D.D, Naugle, D., Hartwig, T.,Clearfield, A. "Solid Solubility Limit of Bi-Pb-Sr-Ca-Mn-O in Bi-Pb-Sr-Ca-Cu-O Superconductors", IEEE Transactions on Applied Superconductivity, (2001) vol.11, no.1, pp. 3446-3448.
Photographs
* Ertekin, A. "Take My Photo", Chasing Dreams, The International Library of Photography, 2000
* Ertekin, A. "Offside", Lasting Illusions, The International Library of Photography, 2000
* Ertekin, A. "Best Place For Resting", Journey's End, The International Library of Photography, 2000

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2901 to 2950 of 4814)

Go to Search Parameters...

Brief Description

As apparent in my resume I have close to 2 years of work experience. The most predominant project I was assigned too was at Motorola. I was working on a New York state-wide two-way radio communication network for emergency personnel.

Purchasing Agent / Buyer

Qualified and Certified NCCCO Operator with all endorsements willing to travel

Piping Engineer (Construction) Diploma in Mechanical Engineering Forteen years experience

troubleshoot and repair mining equipment,Electrical,hydraulic,mechanical,welding

PLC, SCADA, DCS, P&IDiagrams,Project Schedulling,Estimation,MS office

Project Manager/Manufacturing Manager/Site Safety

Senior Project Manager, Quality Manager, International experience

I hold a Master Degree in Civil Eng. – Canadian Equivalent and possess 17 years of professional experience in Project/Construction Managt, Design and Manfg of Structural Steel and Pre-Eng. Buildings. Regstd PE in Canada on August 05.

Experience in QA/QC documentation procedures and processes in a petro-chemical plant construction set-up covering various disciplines i.e. civil, structural, mechanical, electrical and instrumentation. Monitor and ensure that all required documentations are followed as per approved project quality

A total of 9 years of experience of which 3 years at Bharat Heavy Plates &Vessels Visakhapatnam a leading Fabrication Workshop in various capabilities of production, welding, inspection of materials, construction, planning, project engineering and informatics

I have 15 yrs experience in Mechanical, Strustrual, piping in projects& running field in Refinery, petrochemical, oil & gas, chemical, ship repair maintenance & new building as a Sr. mecanical engg., mech manager, Sr. piping engg.

Manage the Camp Administration,Team work skill,having attitude to manage.Result oriented & communication skills that to share to others

DEGREED MECHANICAL ENGINEER - QUALITY ASSURANCE – DESIGN – SERVICE – TECHNICAL SALES

ETAP Power System, PLC, NEC, ANSI, IEEE, NEMA, IEC, electrical testing & commissioning, Over twenty (20) years of hands-on experience focusing on High Voltage (HV) and Low Voltage (LV) Power Distribution System, project management, electrical engineering design, project coordination and supervision

Experience/Knowledge in: * Classification Survey * Statutory Survey * Ship Operation/Management/Audit * Shipbuilding * Ship Repair/Modification * Ship Design (Computer Aided-2D & 3D, Structural & Mechanical) * Quality/Safety Management & Certification * International Standards * Project Management

Qualified heavy diesel machanic

An experience individual with excellent knowledge of Freight handling / Exports Management with the objective of achieving organizational goals and making it a strong profit center, seeks an opportunity in managerial capacity.

More than 15 years of environmental / safety experience in mining industry; 1.5 years of experience in exploration by drilling as geologist; 2.5 years of experience in exploration by drilling as environmental / safety specialist

Kahramma and Qatar petroleum Authorised Electrical Engineer with skills of Automation and 1year Experience in EHV U.G cable installation inside live substation and in infrastructure.

Bachelor of Electronics Engineering ,14+ yrs of experience in designing and commissioning complex programmable logic controller (PLC) based control Systems for Process and Machine automation.drawing tools like AUTOCAD, ORCAD.,SCADA Packages like Intellution-Fix32, Ellipse,

Business Management professional - travel, tourism, travel e-commerce and travel process outsourcing

A qualified and internationally experienced Mechanical Engineering professional graduated from Kirikkale University (Kirikkale/TURKEY) with a Bachelour of Science Degree in Mechanical Engineering in June 1997 followed by a Master of Science Degree in Mechanical Engineering from Texas A&M University

Free! Telecom and electronic engineer, specializing in RF, with over twenty years worldwide experience.

Auto Cad

I am BE (Mechanical). I am working as Assitant Planning Enginner In PECL at LNG Project Of Shell Gas Pvt. Ltd. at Surat

looking for a job

Dear Sir/Madam: I would like to explore the possibility of joining organization. The enclosed resume will provide you with information concerning my abilities, employment history, and educational background.

Looking for work as a civil engineer

Strong computer skills utilizing CAD, GPS & data collection systems. Analysis of survey data and its use combined with aerial photogrammetric surveys. Quality control of digital mapping. Layouts for construction works. Management of multiple survey crews.

Civil Engineer seeking position in the oil Business or Construction

HR Management, Project Management, Consultant

Having worked on projects across Canada and in Mexico, I have a diverse background in Health, Safety and Environmental issues which includes everything from full HSE Management System creation to managing all field work, investigations, HSE Compliance, training, environmental management, etc.

Electrical Engineer with over 21 years' varied experience in Projects- contracts, engineering, construction, project management with EPC-MNC, Large Process/Chemical and Electricity Utility companies

Mineral Engineering Technologist, 6 yrs experience with International geotechnical consulting firm, Mining Engineering Degree expected 2010

I am a Piping / Pipeline Construction Manager or Superintendent in the Oil and Gas Sectors, I have a wide and varied experience of overseas Projects, with expeience of Construction, Maintenenance and Production work on and offshore.

DIRECTOR OF GLOBAL SOURCING / Asia Procurement Strategist • Multi-cultural Relationship Development • Product Innovation / DEDICATED TO HELPING COMPANIES SUCCEED IN ASIA

I have more than 10 years experience in document control , especially electronic data management system, also worked in national and international construction and engineering companies.

Autocad, Primavera Planner, Excel, photoshop My special skills.

OFFSHORE C & I

QualificationsI have worked in the repair related field for over 23 years. I owned and ran a repair shop for the last 13 years working on both gas and diesel repairs. I managed between 10 to 15 employees year round as well as the day to day operations of the business.

Equipment Operator experienced with dozers, graders, scrapers, and snow removal.

18-years of Middle East work experience on Major Projects Documentation in Oil & Gas Industries. Capable to operate different EDMS programs and familiar to Vendor & Design Technical Documents and Engineering Drawings.

Chartered Accountant

I have vast experience in pipeline engineering & integrity involving smart pig, pipeline cleaning, coating. Also, I have experiences in decommisioning of pipelines and skills in engineering maintenances involving static equipment, Corrosion & OCTG.

Civil engineer (having good skill in building design and drafting using autocad application, surveying and plotting and drafting survey map using auto cad land development, structure design, have good knowledge in GIS and HEC-RAS, etc)

Seeking Office Administrator/Administration Asssistant. post -10 Years experience. University Graduate

PhD environmental engineering/bioremediation, MSc environmental diagnostics, BSc (Hons) Biology

Licensed Professional Engineer registered in British Colombia and Alberta, and able to be registered in other Canadian, U.S. and international jurisdictions.

HR Generalist - Manual Payroll, employee Personal filing, Documentation, MOM related work, Policies & Procedure framework, Organizational Develoment, Performance evaluation & Appraisal, Issuance of Official Letters, Employee Engagement & Communication, Employee Retention, Training & Development, etc

First Prev 51 52 53 54 55 56 57 58 [ 59 ] 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out