Resume - A hands on Mechanical Supervisor/ Team Leader, with managerial and technical exp...

Misco Jobs

Resume #17953

CONTACT INFORMATION:
View contact information...

CAREER HISTORY
1997 – Date Dresser Rand (UK) Ltd.
Field Service Representative
Providing technical advice and assistance to clients across the globe. Hands on Installation and commissioning of compression, pumping and generation packages. Maintenance and overhaul of drive train and associated support systems. Supervision of in house, contract and customer labour of all disciplines. Performed customer and internal training. Preparation of proposals and project plans. Project management, internal and external.
Some examples are cited below:

Conoco Phillips Ekofisk 2/4/K Platform Norwegian Sector North Sea
Revamp of 2 GT61R Power Turbine sets. This involved full structural analysis and field machining of the main support rings, in addition to complete inspection and replacement of all static and major rotating components.

Petronas Malaysia
Sales and process gas compressors with GE LM2500G.G., DR61 Power Turbine. Ongoing 25,000hr inspections of 8 turbine sets, comprising complete disassembly and dimensional analysis of all rotating and static elements.

Talisman (formally Elf) Claymore platform UK North Sea
Complete overhauls of 3 tandem compressor trains, employing Avon G.G., DR 53/54 Power Turbine, MAAG reduction gearbox, and Ingersoll Rand MTGB compressor sets.

NAM K14 Dutch Sector North Sea
Compete removal and overhaul of DR54 Power Turbine. From initial site survey through removal, overhaul and replacement. This Involved major structural alterations to the platform. Testimonials received.

1991 – 1997 British Alcan/ British Aluminium
Continuous Improvement Manager
Responsible for the introduction of new production systems, development of key personnel in advanced manufacturing techniques.
Established visible performance measurement across manufacturing organisation employing 170 personnel.
Introduced 5S/ TPM model and JIT systems
Developed and administered 13 module internally delivered development package for Team Leaders, working closely with Cranfield University

Customer Service/ Production Control Manager
Responsible for Production Control, Capacity Management, Shop Tooling Design, Internal Sales, Order Entry and Quotations. 7 staff reporting directly to this position.
Introduced capacity management techniques, reducing manufacturing backlog by 89%
Reduced order entry backlog by 78% through effective demand management.

Production Manager
Part of a management team of 7 responsible for the effective commissioning and start-up of brown field development, and the subsequent management of 70 operations and engineering personnel (15/shift).

Brought installation on stream ahead of time and within budget.
Developed training and development model with operations and engineering
Selected, recruited and trained all personnel.

1976 – 1991 Dresser Rand (UK) Ltd. (originally Ingersoll Rand)
Production Control Manager
Responsible for the effective planning of major projects. Scheduling of machine shop, assembly and test facilities.
Participated in the introduction of MRP II package.

Production Supervisor/ Senior Production Supervisor
Managed/ supervised multi-national workforces on assignments in the UK, Europe, Africa and the Middle East.
Supervised the assembly, packaging and testing of compressor, pump and generator sets, with a variety of drivers and ancillaries.
Facilitation of TQM training with a workforce of 350 personnel based in UK, Europe and the Middle East.

Production Foreman
Supervision of the assembly and packaging of compressor, pump and generator sets.

TRAINING
ISO BSEN9002 internal auditing, TQM facilitator training (Crosby & Corning), Microsoft Project, Microsoft Office, Dresser Rand Professional Manager Programme, British Alcan Leadership Development, Employment and People Management (EEF), Appraisal Techniques, Health & Safety Management, Recruitment and Interviewing Skills. UK & Norwegian offshore survival.

EDUCATION
1989 – 1993 Stockport College of Further Education
Diploma in Operations Management (I.M.) - Financial Based Decision Making, Human Resources Management, Operations Management, Managing Information
Certificate in Industrial and Operations Management (I.I.M.) - Information Systems, Operational Systems, Marketing, Interpersonal Skills

1971 – 1974 Openshaw Technical College
Wythenshawe College of Further Education
G2 General Engineering Certificate
Mechanical Technicians Certificate

1966 – 1971 Wythenshawe Technical High School
CSE Mathematics, Physics, English Language, French, Engineering Workshop Theory and Practice.

OTHER INFORMATION
I have held responsibility for fire safety, including the training and management of Emergency Response Crews across a 4-shift system.
Held responsibility for Emergency Preparedness and Disaster Planning for major industrial site
Assisted and facilitated the introduction and management of Reliability Centred Management (RCM) and Total Productive Maintenance (TPM)
Played an active role in the Instititute of Management, having held responsibility for Management Education for a major region.

PERSONAL
I am interested in computers, photography, computer graphics, DIY. Working out, Scuba diving

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4251 to 4300 of 4798)

Go to Search Parameters...

Brief Description

A hands on Mechanical Supervisor/ Team Leader, with managerial and technical experience, specialising in Rotating Equipment. A total of 20 years spent working for Dresser Rand in the energy conversion business. Additionally, considerable experience in training all levels of the workforce and mgmt.

25 yrs Heavy diesel mechanic in Construction and Pipeline

Manage systems, hardware software, connectivity link, Manage Active Directory,Manage DHCP Serverý

Having good leadership qualities, I can effectively lead and motivate a team. Possesses good inter-personal skill. I value success, which gives me the motivation and drive necessary to achieve personal and company goals. Experience in safety and 5S system implementation

Heavy Equipment operator

diploma in mechanical engineering

B-Tech (Mechanical Engineering) .Presently working as Scientific Officer in Nuclear Power Corporation of India Limited (Department of Atomic Energy).having experiece in 1.Power production, planning and control of process carried out in the plant. and 2 commissioning of systems

Health, Safety, Environment

Strong knowledge in electronics industries PCB design, assembling, trouble shooting

Finance*Strategy*Management*Sales*Contracts*Financial Services*International/Global Trade

Experienced excavator operator on most models of machine up to 80 tonnes. Expierinced in both Civils and Demolition. I am willing to work over seas if needed.

Professional mechanical/industrial engineer seeking a project engineering managmenet or consulting position. Offer extensive engineering and management skills in the industry.

Piping engineer, pipeline engineer, corrosion engineer, mechanical engineer, project engineer, construction engineer

I am a graduate mechanical engineer with close to 16 years experience in the engineering, maintenance, and project engineering fields; large power stations and also in the oil & gas field. Extensive Maximo computorised maintenance management system (CMMS) experience and worked on SAP for 3 years.

Master of Science in Mechanical Engineering Zone and Energy Manager, Facilities Maintenance Manager

Seven years experienced within the Oil & Gas Industry with Multinational Companies engaged in the EPC of Refineries, Petrochemical and Chemical Process Plants, Gas Plants, Well - Heads, Shutdown piping, Cross-Country and Mountain Pipeline projects, in the specific areas of Commissioning Certificati

Project Management / Lean Training / PFMEA (Process failure modes and effects analysis) / PCP (Process Control Plan) / PFD (Process Flow Diagrams) / Lean Manufacturing / 5S / Value Stream Mapping / Visual Management

HVAC, Maintance

I have been working as a Computer Technician for the past two (2) years. I received eight (8) CXC subjects and BSc. in Electronics and Communications from the University of Technology. I also have two (2) years engineering related experience working with TCom/Huawei Technologies/CLARO.

Logistics, shipping and Offshore Assistant

Driven by innovation and integrity as a member or your technical group I will be able to provide technical drafting support using the latest version of Microstation, Intergraph, Auto Cad and other GIS, ICGS software platforms. In addition, perform non-routine and complex drafting assignments, Coordi

I have 12 years experience in the South African Police ( VIP Protection , Access Control , Cime Prevention , Investigatins ) , 3 Years experience in The Private Security Industry ( Regional Manager ) and 1 year experience in conflict zones ( Baghdad , raq as a Mentor / Advisor )

Specialized in International Human Resources, I am currently in Dubai responsible for personnel management in a multicultural environment. In France, I also actively participated in Rio Tinto Alcan to the setting up of a European HRIS.

I work offshore in the Gulf of Mexico contracted by oil and gas companies to monitor compliance and compile monthly reports. I work 12 or more hours per day 7 days a week and am used to physically challenging work.

I started my career in 1991. I am a qualified fitter & turner (trade) Currently working as a workshop foreman. Did courses in inspection (QC) and management.

Eletro/Mechanical Technician, Applications Engineer

Pro Engineer 2+ years experience

Canadian Medic

I have an ability to grasp new concepts quickly and clearly to apply my knowledge and experience for tackling tricky situations.

Iinterested and would like to have an opportunity to work with your company, as Account Executive. I believe there would be a good fit between my skills and interests and your needs.

Visual C++, C#, Visual Basic, Java, J#, Pascal, PROLOG Tools:1.Professional: Microsoft Visual Studio.Net, C builder, Java Visual Age, SQL Server 2000 2.User level: Microsoft Office, Visual Studio, Web Studio, Oracle 9i, Scripting and markup languages: HTML, XML, XSL, VBScript

Senior administrative skills, leadership, international recruitment, training, generalist HR, education, liaison,

During my studies I worked in cooperation with the Egyptain Geological Survey in the Eastern and Western Desert of Egypt and in another project together with the University of El Jadida, Morocco. Main subjects were mapping and sampling as well as geomagnetic. Working experience is shown in my CV.

I WAS DONE B=TECH IN MECHANICAL ENGG WITH 72% MARKS & ALSO DONE DIPLOMA IN MECHANICA;L ENGG & I HAVE ALSO THREE YEAR WORK EXPERIENCE

I have been involved in developement and implementation of various safety programs and helping create safety cultures within organizations on and off the job. My most recent assignments have been in UAE and Mexico as a HSE Manager and I would like to continue in this role.

Experienced Automation/Process Control Engineer

I am Construction Supervisor Who Worked under Dam, Channel, Roads, Mining many counties of the world - Around 17 years. My Area was Filling, Excavation Site Arrangements, People Controlling, Training etc.

To secure a position a Purchasing /Buyer In your company.

Master Mariner and have experience as Senior Officer on LPG Carriers

DRILLING FLUID ENGINEERING ( MUD ANALYSIS), SURVIVAL AT SEA AND HELICOPTER UNDERWATER ESCAPE TRAINING, M S SUITE

FRAMME (Intergraph), Microstation (Bentley Systems), Projectwise, C++, Microsoft Office, HTML, Matlab, AUTOCAD,

Auto CAD Operator & 1 Year Working Experience in Auto Plant (specialized software of piping)

! have 23 years in the oil and gas industry with the last 10 in the pipeline control room. Handling 10000 miles of pipeline reciepts and deliveries.

10+ Years Experience PLC Programming PC Board Testing/Repair Test Point Systems

B.Tech Engineer having 2+ years of experience presently working as a planning engineer with Reliance ,Jamnagar for JERP project. Can handle softwares required for job accomplishment.

Geotechnical, Geological Exploration, Resevoir geologist

Proficient in Microsoft Office Programs; Familiar with OSHA and NFPA federal standzards; Technical Skills; Research Skills

I am interested in employment for any position where I may acquire new skills or my current skills may be fully utilized. I have experience in Crush and Convey, Leaching, Haulage, Safety and Environmental areas. Upon my employment I will bring a safe and positive work ethic to your company.

QAQC Inspector. I have Experience on both LNG Termals and Oil Refineries

I am confident that my training and experience in the area of safety and health as well as international teaching and program development skills would benefit a company that is seeking to excel in this area.

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 [ 86 ] 87 88 89 90 91 92 93 94 95 96 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out