Resume - Mining engineer with special passion for drill and blast operations but experien...

Misco Jobs

Resume #20728

CONTACT INFORMATION:
View contact information...

WORKING EXPERIENCE
Sep 2003 - I have been at home working as a security and safety consultant providing burglar-alarm and fire-alarm solutions for companies and homeowners as well as helping companies with fire-prevention documentation needed according to new Swedish legislature.

Feb 2003 – Sep 2003 I took a temporary job as a supervisor for Byggs, supervising grouting and shotcreating operations, leading one shift of pre-grouting and shotcreating operations for the permanent rock-support of a railroad tunnel during the star-up stage of the project.

Feb 2000 – Feb 2003 I was working as a supervisor for BESAB on road-tunnels in Stockholm leading one shift of pre-grouting and shotcreating operations for the permanent rock-support of the tunnel system.
We also did grouting operations using chemical grouting agents in areas with heavy leakage.
After the permanent rock-support was finished we also were contracted to cover areas with persisting water-leakage with foam-rubber drainage-mats that were then shot-created over.
On this project I was to great deal responsible for the administration of subcontractors and I also introduced a system for keeping track of all extra work ordered by the main contractors supervisors to our personnel in the tunnels thereby ensuring that we received payment for the extra work being carried out.
I also took on the task of ensuring that all our progress reports were checked and properly logged in our computer-system presenting accurate reports to the main contractor, Skanska co.
I was also responsible for ordering and purchasing materials as well as keeping records of the materials consumed and taking inventory.

Feb 1999 –Feb 2000 I spent at home working on my house and spending time with my family.

Oct. 1997- Feb.1999 I worked a tunnelling supervisor for Skanska Co. In Zimbabwe.
We were making a 4.2 km. tunnel for water-supply to the third largest city in Zimbabwe. We used a high-speed tunnelling method using rail-born equipment such as a Atlas Copco boomer drill-rig and the Häggloader loader and shuttle-cars from Rockmachines and locomotives from GIA of Sweden. My main job was as tunnelling supervisor. I also did follow-ups concerning statistics, project planning and progress. On many occasions I also worked as tunnelling superintendent/production-manager taking care of the entire site. I supervised the drilling and charging, the mucking-operation and the laying of rail, surveying and planning.The rock-support consisted of spiling and rock-bolts, shotcreating and grouting. We worked in two shifts continous around the clock averaging about 3,5 complete round per day with an advance of about 3,6-3,7 meters per round.
On this project I improved the blasting procedure and also improved the servicing of the rails and other service-works in the tunnel as well as training local workforce.

July 1994 – Oct 1997
I was hired as a blasting engineer at Saudi Chemical Co. in Saudi Arabia. I worked at, what was at the time, the worlds largest underground projects in Madinah, Jeddah, Abha, Bureida.
The projects very large underground oil-storage caverns for the SSSP ( Saudi Strategic Storage Programme). The main contractor was ABV Rock Group and we worked as subcontractors taking care of all the blasting being carried out on the different sites. I supplied blasting patterns, blasters, supervision and security. I was also in charge of closing adjoining areas in order to provide safe blasting conditions as well as being in charge of the explosives stores. On the Bureidah site I was promoted to blasting/project manager. I was also in charge of drilling and blasting operations for an extension of the highway in Riyadh. The job consisted of bench-blasting a cut through the rock to accommodate the highway. On that site we were also responsible for the drilling. I then moved to Al Khobar and became blasting manager for a pipe-line project from Al Khobar to Riyadh. The total length of blasting was just over 190 kilometres which was blasted at a rate of 1 to 2 kilometres per day in one blast. The trench we were blasting was only 7 to 12 metres away from an existing pipe-line so we had strict vibration levels that we had to follow, so the task also included setting out vibration-monitors and follow up on the readings taken and presenting them to the client. The work was done for ARAMCO and the main contractor was SAIPEM Co. of Italy. The project was finished ahead of schedule and at a lower cost than budgeted.
I also led the construction of the storage area for the explosives, getting them approved by the local police, organising the explosives and the records necessary to comply with Saudi legislature.
I was responsible for hiring a storekeeper, all dealings with the explosives police and all other matters enabling us to carry out the daily blasting operations
I also spent one week in Yemen, on behalf of the sales division, where I looked at some various projects, highways and military installations, and made suggestions for different improvements and recommendations regarding blasting material. Upon return to Saudi I wrote reports regarding the different companies I had visited and my projections for potential business with them.

Sept. 1989-July 1994 I worked as a miner for Boliden Mineral in Garpenberg, Sweden. Among other things the job consisted in drilling, blasting, mucking out, rock-bolting, and general mining chores.

EDUCATION
2003 I took another course in blasting technique at Dyno Nobel

1989-93 Studying at the Swedish school of mines and metallurgy in Filipstad, Sweden,
Where I graduated in mining engineering and civil engineering in june-93.These studies covered all aspects of underground and surface rockworks such as mechanics, design-engineering, computer technology, electrical engineering, mechanical engineering, physical and applied chemistry, business economics, materials testing, particle technology, statistical methods, personnel administration, mineralogy and petrology, geology, underground surveying, prospecting, mining engineering, mineral processing and mineral technology. During my studies I also did six months as a junior engineer at NITRO CONSULT in Gothenburg, Sweden. During my time there I was involved in test-blasting, vibration measurements and analysis, risk analysis for project planning of Lundby road-tunnel in Gothenburg, Sweden, well depth soundings, pre-blasting inspection of buildings and structures, cost optimization analysis when drilling 7.6 metres deep production rounds at LKAB of Malmberget, Sweden.I also took a course in blasting techniques at Nitro Nobel.

1980-82 Military service (15 months) as junior officer in the Swedish artillery,as commander of a heavy howitzer platoon, including 60 – 70 soldiers all weapons, vehicles and material
The training also included field surveying, demolition blasting, learning to drive heavy trucks, wheel-loaders and other heavy equipment.

1977-80 Studied for three years at Tingvallagymnasiet, Karlstad, Sweden

1976-77 Studied one year as an exchange-student in Broomfield, Colorado, USA.

QTHER SKILLS
Language skills;
* English – excellent
* German – fair
* French – little
* Spanish – little
* Arabic – a few phrases

* I am quite at home working with a computer.
* I have no problems adapting to different environments and cultures.
* I am an experienced traveller.
* Holds a drivers license for car and heavy truck
* Holds a blasting license (Swedish)
* Instructor at local Swedish national guard regarding practical use of civilian explosives.
* Active in Swedish national guard.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4551 to 4600 of 4806)

Go to Search Parameters...

Brief Description

HUMAN RESOURCES PROFESSIONAL

I drive a fork lift and i can use power tools and i have my mine safety pappers

Training Coordinator

CSWIP 3.1 Welding Inspector, MIGAS Welding Inspector, Familiar with Software (Auto Cad, PDMS, Pro-Eng), Familiar with Microsoft Office (Word, Excel, Power Point, Visio)

Diploma in computer engineering from state board of punjab

I am a maintenance planner engineer and MAXIMO specialist in a petroleoum company. I worked as a MAXIMO specialist for 2 years before planning.

I believe by going through my academic qualification and rich working experience of four years in abroad and seven years in India on computer operation and office administration. I have commitment and loyalty; can work at any pressure, hard situation and provisional environment.

Security, life support, camp management, logistics

Bilinguel (CSST) Construction Site Safety Technicion

I am an enthusiastic highly motivated Quantity Surveyor / Cost Engineer, with an excellent working knowledge of pre & post contract quantity surveying and also pro-active team member with experience of major construction projects. I have gained deep awareness of contract administration and advanced

Technical Writer / Editor and Proposal Writer

Accomplished, result-oriented contract expert with three years proven success in managing contract, administration and logistics; and two years experienced in project estimating. Civil Engineering graduate, ready to transfer highly versatile knowledge and skills to a career in the private sector.

Truck Driver with experience in oil field activites.

Mining engineer with special passion for drill and blast operations but experience of many aspects of contemporary mining/rockworks operations. International experience and excellent language skills.

Electrical engineer (2 years experience),researcher(1 year experience)

I am a motivated graduate with qualifications in Geological Engineering, Applied Petroleum Geoscience and Quantity Surveying and I am proactive, confident with excellent communicative skills. I am flexible in my approach work, accurate and punctual. I am focussed and motivated with eye for details

BEng.(Water Resorces and Environmental Engineering),Microsoft Office,AutoCAD

I am a seasoned QMS Internal & External Auditee, a trained QMS Internal Auditor and Document Controller, currently managing the implementation of ISO 9001:2008 (QMS) for a company in Nigeria. I have over five years experience in both Oil and Gas industry and Insurance Company working as document con

Strong English verbal and written communication skills • Specialized knowledge in MS Office suite- Outlook, and filling out DD Forms • Computer literacy in word processing, database maintenance, and spreadsheet software

Chemical engg. with 70% and working in Technip as a process/piping engineer.

Instrumentation and Controls Engineer

I have worked in the construction field for the past 11 years in every element mother nature could throw at us. I also have alot of experiance with the day to day up keep of tractors and large trucks, and some wielding/fabricating work aswell.

I am searching for possible traineeship and possibility for praxes in field of hydraulic and hydro technique

I am a mechanical engineer (B.E) having 7 years of experience in erection, commissioning, operation and maintenance of power plant equipments

Skills of dealing with computer programs like microsoft office programs, and internet. commuincation and team work skills, ability to work under pressure, marketing and selling skills , active commuincation skills, arabic-english typing skills, icdl certificate, english skills written and spoken

Recently graduated with a Bachelor Degree in Business Administration (5/2007). Worked at Bisco Industries as a Management Trainee/Sales, 11/2007 – 07/2009.

Professional ROW Agent and Landman

Project Manager, Business Process Analyst, System Analyst and Designer

Free! Esri Software Senior Developer

Experienced in organic farming field and holding a M.S in horticulture degree and looking for jobs in agriculture sector and also in sustaibale agriculture.

I perform a variety of duties as well as working in a collaborated team player environment; 3 plus years of experience in clerical work as well as Customer Service work; Ensure that the necessary quality records are specified, generated and controlled in accordance with the appropriate procedures;

Accounts Manager, MCom, CWAI

Senior manager with extensive experience in the development and management of information technology and data communications operations. Skilled in designing, building and operating wireless networks. Excellent background in the integration of multiple technologies in a single network platform.

I have work experience in both engineering and sales fields for almost 2.5 years. I’m bachelor degree in mechanical engineering also graduated from energy engineering.

More than 10 years of experience in senior positions as Financial controller /company secretary in various reputed companies including external role as consulting company secretary/financial consultant.

Dear Sir, I am very interested to apply for Insurance position, a position for which I am confident in my abilities to bring major contributions. I am currently working in the areas Insurance and Management. General Ledger entries and conciliation, the follow up of Receivables were one of the tasks

Secure a position within the maritime industry that will benefit from my excellent technical, professional and leadership skills as well as my education and license qualifications.

Office Support Personnel ; Construction Material Controller ; Information Tech. Degree

Recently graduated, trained in Auto CAD and Microstation.

Overall my known skills cover the realm from operating sophisticated computer equipment, data modeling and statistical programs, as well as, more traditional work related skills. From builing and designing landscapes and homes, to construction of reclaimed habitat, I have a varied skill set.

Working for about 9 years with multinational construction companies and consultancy firms in large scale international projects is my solid base upon which I became a Professional Civil Engineer. Aware by Quality and Safety Management Systems, Civil Engineering International Codes and standards.

Having exp. in fabrication, workshop (100tonpower press) components production, fabrication of structures, industrial sheds as per drawing (supervision of the work), greenhouses components designing for dies, manufacturing erection (100% nut, bolt system), confident in any work, since 12 years

MS- DOS, Windows 9x, Windows XP, Windows 2000 Professional, Windows 2000/2003 Server, MS- Office 2007, Open Office, MS Outlook, Outlook Express 2003, Adobe Indesign, Photoshop

Asphalt Supervisor / QC Manager / Foreman / Asphalt Paving 2 Tech / Plant 2 Tech / Asst. Proj. Manager

Several years experience in the electrical and electronic field. Experienced in installing, troubleshooting and repairing electrical and electronic units. Maintained and serviced Telecommunication systems and Data communication equipment.

mechanical engineer

Fourteen (14) years of progressively responsible experience in logistics, procurement, warehousing, and supply chain management along with fourteen (14) years experience in technical & electronic maintenance.

Mining Engineer with Operations Experience

Senior Piping Designer/Construction Engineer - office and field

(Auto CAD Technician / Welder) 2-D Mechanical, 2-D Architectural, 3-D Sectional Drawings of Mechanical Engineering Parts etc.

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 [ 92 ] 93 94 95 96 97 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out