Resume - Graduated 09/2004 in Master of Science (Mechanical Engineering) from The Univers...

Misco Jobs

Resume #20887

CONTACT INFORMATION:
View contact information...

OBJECTIVE: To seek the post of Design Engineer or Mechanical Engineer. To be involved in optimizing designs of machines or systems for optimum performance. To contribute significantly to the growth and profitability of a dynamic organisation that is constantly innovating and pushing the envelope.

HIGHLIGHTS OF QUALIFICATIONS
* Graduated in September 2004 from The University at Buffalo (UB), The State University of New York with a Master of Science in Mechanical Engineering.
* Completed a thesis at UB in decentralization of the design of complex systems.
* Eight years experience in facilities management at the 800,000 m2 floor area campus of the National University of Singapore (NUS).
* Strong project management and research skills.
* Wrote nine articles for Singapore's top english daily, The Straits Times.
* Active in outdoor activities and community service.

RELEVANT SKILLS AND ACCOMPLISHMENT
MS coursework
* Optimization in Engineering Design
* Heuristic Optimization
* CAD applications
* Composite Materials
* Graphics in CAD
* Cryogenic Process Engineering
* Engineering Procedure Writing
* Technical Communications for Engineers

Optimization of Engineering systems
* Used Method of Feasible Directions, Sequential Linear Programming, and Sequential Quadratic Programming to optimize design of a water reservoir system [UB].
* Employed Genetic Algorithms to study decentralized optimization of complex systems for MS thesis. Details at http://home.eol.ca/~jochebel/new_page_2.htm.
* Used Genetic Algorithms to optimize design of a Joule-Thomson cryogenic cooler [UB].
* Used Simulated Annealing, Random Search, and Enumerative Search to optimize design of water distribution network [UB]. Details at http://home.eol.ca/~jochebel/new_page_3.htm.
* Applied MS Excel's optimization software, Solver, in problem solving [UB].

Computer Skills/Knowledge
* Extensive C and Fortran programming experience [UB].
* Simulated the driver's view of a futuristic vehicle using OpenGL and C [UB].
* Used X-Windows and C to write a rudimentary CAD software [UB].
* Modeled the operation of a 1.5 million gallon water reservoir using MS Excel [NUS]. Details at http://home.eol.ca/~jochebel/new_page_4.htm.
* Used the software PROMAL to conduct stress and strain analysis on composite materials [UB].
* Used ProE to analyze the vulnerability of the Golden Gate Bridge to a terrorist explosion [UB].
* Used ProMechanica and ProE to analyze the motion of a crank rocker [UB].
* Used ProE to conduct static stress analysis of a 3D cantilever beam [UB].
* Applied AutoCAD Release 13 to draw the water pipes layout on a pre-existing AutoCAD drawing of the NUS campus [NUS].

Project Management
* Worked with consultants to plan the replacement of a 1.5 million gallon water reservoir costing US $2.9 million [NUS].
* Coordinated with consultant, contractors, and stakeholders to replace the NUS' fire protection system costing US $9 million.
* Wrote, tendered, awarded, and monitored onsite the contract for laying 3 miles of 12 inch diameter water pipes costing US $0.9 million [NUS].

Supervision/Teamwork
* Revamped a 30-man maintenance team to create a flatter hierarchy; reduce response time to customer's request; and increase staff accountability and skills range [NUS].
* Interviewed, hired, and developed staff in frontline maintenance of plumbing and sanitary systems, and fire protection systems [NUS].
* Worked with consultants and contractors in upgrading of existing office space [NUS].
* Collaborated with fellow UB students in project work.

Technical Communications
* Wrote level one, two, and three ISO 9000 manual for a fictitious automobile company [UB].
* Wrote the proposal to replace an ageing water reservoir in a university campus [UB].
* Conducted research and made a presentation to fellow students on the application of ISO 14000 in the workplace [UB].

Community Service/Activities
* Prepared breakfast for homeless people in a soup kitchen in church-based "Out-of-the–Cold" program (Toronto, Canada January 2004).
* Spent a day helping to construct a house for Habitat for Humanity at Fort Erie, Canada (Summer 2003).
* Acquired Wilderness First Aid certification at UB (Fall 2002).
* Member, South Niagara Adult Rowing League, Welland, Canada (Spring 2002).
* Volunteered three months onboard a humanitarian aid vessel, MV Doulos, and worked in the ship's bookstore (1992-1993).
* Attended 24-day Outward Bound program in New Zealand (1990).

EMPLOYMENT HISTORY
03/2003 – 09/2004 Part-time Translator Citizenship & Immigration Canada, Canada
12/2002 – 09/2004 Part-time Tutor Self-employed, Canada
03/1993 – 05/2001 Facilities Manager National University of Singapore, Singapore
11/1992 – 02/1993 Volunteer Operation Mobilisation, Singapore
02/1992 – 10/1992 Free-lance writer Self-employed, Singapore
02/1991 – 01/1992 Research Officer Ministry of Defense, Singapore
07/1989 – 11/1990 Engineer Public Utilities Board, Singapore

EDUCATION
* Master of Science (September 2004), Mechanical Engineering, The University at Buffalo, The State University of New York, Buffalo, New York, US. GPA: 3.523/4.0.
* Bachelor of Engineering (June 1988), Mechanical Engineering, The National University of Singapore, Singapore.

NOTES/OTHER INFORMATION
Willing to travel or relocate. References available on request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4451 to 4500 of 4759)

Go to Search Parameters...

Brief Description

Heavy Eqiupment Operator,Construction,

A comprehensive billing system for about 62 hired Heavy machinery's was successfully implemented.

Human Resources Generalist

B2B Marketing, Product Development, Dealer Management, Market Research

Ms-word,Ms-Excel,Proficient in management,General HSE certification, HSE Competency Development Course Level 3

If you need a dedicated expert heavy equipment/drill rigs/are welder/fab/design, hydraulics, air compressors, all around field/shop management, i can design/build & repair anything with or without a big budget, will work on contract are as needed!!

Cummins Sales & Service Pakistan (Power Generation)(Nov2007 – to date)Mining Experience(2004-2007):

Daily rotational positions including, Operation of Kranco over-head charge crane with 15 and 50 ton hoist, Kranco over-head make-up crane with load lifting magnet & clam shell bucket, Deck operations for 2 Brown Boveri 55 ton coreless furnaces

NDT TECHNICIAN

Project Manager, Plant Technical Manager, Interface Engineering Coordinator, Pre-commissioning Engineer, Commissioning Engineer, Start-up Engineer, Process Engineer, Chemical Engineer

Instrumentation Supervisor

iosh managing safely and osha in construction safety and health qalified hse officer with 9 yrs experience in safety. other trainings attended: basic rescue, work safely at heights, scaffolding, first aid, fire fighting etc. work experience in india and middle east in construction projects.

Tehnical Skill: able to fix trouble shooting such as : Hydraulic, Electric and Power Train system of heavy equipment. Abel to manage more then 250 people subordinates

Sr. Health & Safety Engineer - OHS Procedures, Training, Inspection, Audit; HSE Plan, Objectives, Matrix etc.

Detail oriented Instrument and Controls technician seeking international opportunities

20 years experience in Industrial Electronics, Electrical,Mechanical, Pneumatics, Hydraulics

Involved in all construction activities including fabrication , installation and control off all structural items.Steel structural estimates include, pipe-racks, elevated pipe supports, pump shelters, access platforms, handrails, et

2 years experience in an Open pit coal mine. I have done long term planning for pit and dump, various professional reports, tailings dam design and monitoring, and yearly budget planning. Therefore, I have experience in both mining and geotechnical engineering.

Mechanical Engineer, 12 Years Gulf Experience In Maintenance Department

I am a current registered EMT Paramedic Assessor and First Aid Instructor. I am now working in a local company as a Safety cum Fire Safety Manager. My responsibilities include coordinate and conduct training, investigate and writing incident report, ensure safety at workplace comply.

I have ability on heavy duty equipments operation,fms dispatch system using high technologies,mine supervision as well.

Dynamic Health & Safety Coordinator Looking For Work In Mining, Heavy Construction Or Oil Industry

im interested in doin marine and i spoke wel in english and i know hindi also and my specification is doin work in any circumstances

International Safety / Risk Professional available for fulltime or contract employment.

Workplace Safety Health Environment Coordinator - Moreton Island Oil Spill Clean Up Project

12 years experience in instrumentation mining processing plant.holder of a craft certifitecate in process control instrumentation.

Finance, Investment Banking, Management consulting

I have my fisrt degree in ghana in one of the best universities in the country as well and am currently working with one of the biggest mining company in the country too.

departmental administration work, sales coordination, tender preparation, individual material costing. B.Sc. (Maths), Certificate and Diploma in Computers

I would like to apply for a position where I can use my extensive experience in Managing, Coordinating, Supervising, Inspecting and Maintaining and my dedication to quality in Systems installation, Electrical engineering, Maintenance and Repair to help you obtain your company's mission.

Power mechanical engineer 2001 good

Experienced in construction and repair of recovery and power boilers, exchangers, vessels, light and heavy plate work, basic pipe and structural fitting, as well as work on mild steel, stainless, and aluminum.

To pursue my career in the field of Construction/Consulting/Project Management Services as a Projects team member, with a challenging and competitive work environment that best utilizes my technical Skills, Experience and Enthusiasm.

As for my educational qualification, I wish to state that I am a Diploma holder in civil engineering. I have completed AutoCAD 2000, Architectural Desktop R-3, Structural Analysis & Design(GT STRUDL), MicroStation SE. Photoshop 5.5

Commissioning, servicing, maintenance, diesel gensets, engine-alternator alignments, overhauling diesel engines.

an economics graduate from olabisi onabanjo university. i also belong to a professional memeber of the institute of chartered accountant of nigeria.

Blueprint Reading - Mig, arc and gas welding

Higher Diploma In Business And IT, UBS Computerised System, Basic Knowledge Of Computers And Web Publishing

HSE ENGINEER AND SUPERVISOR

Oracle, LPN, 3PL, Supply Chain, Imports, Logistics

Graduated 09/2004 in Master of Science (Mechanical Engineering) from The University at Buffalo, The State University of New York. Emphasis: Design Optimization. 8 years experience in facilities management (water, fire protection). Extensive experience in South and South East Asia.

Twenty-two years in leadership and management with ten years experience in the Petrochem/Paper Mill industry. Ten years in health and safety in the fields of general construction, maintenance, Turn Around/Shutdown. Able to identify at risk behaviors, trends, and policy infractions through observati

BE in Mechanical Engineering.

Electrical Apprentice/ Skidsteer Operator/ Forklift Oper ator/ Labourer

Logistics/Shipping Coordinator with 6 years experience in an EPC company handling various oil and gas projects worldwide. Proficient in logistics operation, with good communication and negotiation skills and could lead a group of people in a project.

Maintenance Technician

Plant / Substations Operation, Maintenance and Testing

Experienced CAD-GIS Professional/Consultant with years of experience in Autodesk design softwares such as AutoCAD, Civil 3D, Map 3D, MapGuide Enterprise and Raster Design.

Marine Geologist with experience in Bathymetric, Oceanographic, Geophysical and Geotechnical Data Processing and QA/QC. Proficient in MicroStation, uSMART and InRoads mapping softwares.

To obtain a challenging, high demand QA/QC, Power Generation Tech, Electrical or Mechanical position utilizing my skills and experience in all fields.

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 [ 90 ] 91 92 93 94 95 96 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out