Resume - I am a Senior Planner/ Project Controller with certified versatile capabilities ...

Misco Jobs

Resume #21009

CONTACT INFORMATION:
View contact information...

EXPERIENCE
February,2004 – Present Arab Technical Construction Company (arabtec), Dubai, UAE

SENIOR PLANNING ENGINEER
AL Fattan towers Project.

Responsible for the planning & Monitoring activities for Al Fattan towers (2 residential Towers 52 story each sharing a 3 level podium & 3 level basement Total area of typical floor is approximately 1500 square meter for each tower and total Area of each floor of basements is 11000 square meter)

Le Reve Residential tower Project.
Responsible for the planning & Monitoring activities for Le Reve tower ( residential Tower 51 story approximately 1400 square meter for each tower (Two very prestigious flats in Each level up to level 36 and one flat per floor above level 36)

Dubai Pearl Project (Tower A1, A4 & A5).
Responsible for the planning & monitoring activities for 4 packages of Dubai Pearl Project (Hotel Tower 62 story in addition to 2 residential Towers 52 story and the shared 3 levels podium of a total area of approximately 66000 square meter per level)

July,2001– December,2003 A. A. Turki Corporation ATCO Dammam, KSA

Planning & Cost Control Section Manager

* Managing the planning Cost control section for the Company and successfully directing the planning and cost control team utilizing an advance planning and cost control system (PRIMAVERA ENTERPRISE) to monitor and control the cost of company Projects assuring timely completion of projects within budget.

* Assisting General Manager in preparation of Enterprise strategic plans and fiscal budgets.

* Planning recruitment in addition to the preventive maintenance and renovation of enterprise owned resource pool.

* Assessing vendors/ subcontractors technical proposals for alternatives enhancing schedules and costs for critical items specially during tendering stage.

* Providing tendering stage schedules, resource loading and cash flow and analyzing risks of all new tenders on company cash flow and resources to obtain board of directors' approvals on tendered projects which exceeded a value of 1.2 billion SAR during 2002.

* Planning Execution, Monitoring milestones and obtaining clients approvals on Projects construction schedules.

* Monitoring Execution and preparing weekly reports and look-ahead schedules for all projects and consolidating projects reports into monthly reports to Higher Managements.

* Coordinating and circulating resources (between 14 Project through out 2002 & 2003) in various fields (Infra Structure, Industrial, Residential Complexes, Palaces and high rise buildings).

* Scheduling, budgeting and monitoring variances for all procurement activities to assure timely arrival of materials to sites while registering records and alarming for variances in quantities and prices.

* Preparing recovery schedules and action plans for recovering variances and/or assessing changes impact on schedules and budgets and preparing time extension claims.

* Major Projects:

1. EASTERN PROVINCE CEMENT COMPANY HEAD OFFICE EPCC (Dammam – Khobar Highway)
The (SAR 70M) project was a 19 Story CIP Framing Building with curtain Walls Cladding. Built on loose soil utilizing Pile foundations. It consists of a basement, Ground Floor, a technical floor, 15 repetitive stories and a roof. The building has a built up area exceeding 20,000 m2 with high quality finishes and modern electro-mechanical systems (Addressable fire detection system, fire fighting system, intelligent power saving lighting system, MATV, CCTV, LAN and Chilled water HVAC system) Most of which are monitored and controlled by a sophisticated BMS.

2. ABDUL-KAREEM COMMERCIAL BUILDING SAMC (Dammam Cornish Road)
The (SAR 30M) project was a 10 Story CIP Framing Building with curtain Walls Cladding. Built on loose soil utilizing Pile foundations. It consists of a basement, Ground Floor, a Mezzanine floor, 6 repetitive stories and a restaurant on the roof floor. The building has a built up area exceeding 12,000 m2 with high quality finishes and modern electro-mechanical systems (Addressable fire detection system, fire fighting system, intelligent power saving lighting system, MATV, CCTV, LAN and Package type HVAC system) Most of which are monitored and controlled by a sophisticated BMS.

3. ATEF SAEED COMMERSIAL BUILDING (Khobar Pepsi Road)
The (SAR 13M) project was a 6 Story CIP Framing Building with curtain Walls Cladding. Built on loose soil utilizing Raft foundations. It consists of a basement, Ground Floor, a Mezzanine floor, 3 repetitive stories and a roof floor. The building has a built up area exceeding 7,000 m2 with high quality finishes and modern electro-mechanical systems (Analogue fire detection system, fire fighting system, intelligent power saving lighting system, MATV, CCTV, LAN and Package type HVAC system).

4. AMCDE ENGINEERING OFFICE BUILDING – Khobar Rakah
The (SAR 13M) project was a 5 Story CIP Framing Building with curtain Walls Cladding. Built on loose soil utilizing Raft foundations. It consists of a Ground Floor, a Mezzanine floor, 3 repetitive stories and a restaurant on the roof floor. The building has a built up area exceeding 6,000 m2 with high quality finishes and modern electro-mechanical systems (Analogue fire detection system, fire fighting system, lighting system, MATV, CCTV, LAN and Package type HVAC system.

5. AL JERAISY RESIDENTIAL COMPLEX – Riyadh
The (SAR 50M Excluding Material Prices) project consist of 2 Prestigious Residential palaces, 6 Sons Villas, Reception palace, 2 diwanias, a mosque, a driver quarter, for a total built up area exceeding 22,000m2 and annexes surrounded by more than 2000 m of pre-cast concrete perimeter fences. The project contains intensive high quality landscaping that contains –but not limited to- Seven swimming pool, Artificial lake, fountains and plantation

6. PRECISION FORGING PLANT. (Dammam Second Industrial Area)
The (SAR100M) Heavy industrial Project consists of a Production building, an administration building, main incoming substation building, 2 underground water tanks (Fire and sweet Water), a septic tank, a reverse osmosis plant building, a water well, a weighing bridge, a material storage area, perimeter fences and guard house in addition to several buried supporting utilities.

The Main production building was an 8,000 m2 Steel Structure Building that contains 2 presses (2500 Ton & 4000 Ton) in addition to Material Cutting and Staging for Both Carbon Steel and stainless steel flanges, Die Manufacturing lines, car hearth Furnaces, totally computerized Milling Machines in addition to 2 Overhead Cranes and the associated control rooms, electrical rooms, mechanical rooms, labs and technical offices).

The administration building was a 2500 m2 2 Story steel structure building supported by modern electro-mechanical systems.

7. APPLIED MEDICAL SCIENCES FACULTY – King Faisal University Dammam
The (SAR 50M) Project consist of a 3 Story CIP Concrete Building (15,000 m2) Built in KFU compos over a very loose sand enhanced by soil replacement Method (Stone Columns).

The building contains several class rooms, offices, labs, Dean & Staff offices, auditorium and Plaza are with all accompanied sophisticated electro-mechanical system for such construction like LPG, oxygen and Vacuum lies, LAN, Fire detection and fighting systems, MATV, CCTV and chilled water HVAC system.

8. AL KHALEEG VILLAGE –Saudi Hotel & Resort company SHARACO Half-moon
The (SAR 15M) Projects was the infrastructure for a Village. It was to construct a 6 km 12m Road under which Sewer lines, Fire Water Lines, Raw Water lines, Medium Voltage Cables and telecommunication cables. The scope of work included the street lighting, 3 Lift Stations, 3 Electrical Substations and several Manholes and Holes in addition to the surrounding landscaping and side walks.

9. ARAMCO POWER DISTRIBUTION DEPARTMENT HEAD OFFICE BUILDING –ABQAIQ
The (SAR 17M) project was to Construct a 6000m2 Steel Structure Building Head office Building in addition to a workshop, Truck and Trailer Shelter, Musalla and Covered Storage Area. The project scope of work included all Civil, Mechanical, Electrical, HVAC and furniture work adopting the well known ARAMCO standards and procedures.

10. SCECO SUBSTATIONS – Dammam & Faisaliah
The Scope of work was to construct 2 Substations for the 36.6 KVA Stations located in Dammam first industrial Area and Faisaliah. Each was approximately 450m2 with all required electromechanical Systems, cable trays, Duct Banks and trenches adopting SCECO well known Standards & Procedures.

11. AL TURKI COMMERCIAL CENTER – Khobar Cornish Road
The Scope of work was to construct a three steel Building shopping center with pre-cast concrete cladding, with glass shop fronts and electrically operated doors. The scope included providing three transformers, package type AC Units, Fire Fighting system in addition to external work that consists of Underground water tank, asphalt work. Side walks and fountains. Internal Finishes were left to tenants

July,2000–July,2001 ELMANDEB EST Dammam
Projects Control Section Manager
* Responsibility included Projects Planning, Monitoring activities, Coordination between projects, Procurement activities in addition to managing the Engineering Activities for Establishment owned Pre-Cast concrete factory, providing principal contact with the customer and review of all contracts and claims for several projects constructed by establishment in three major Fields, namely: Pre-cast Concrete Construction, Water Supply and Sewerage and Building construction.

1998–2000 FEMCO Al Khobar
Planning Engineer promoted to Section Manager
* Developing project plans (Master Plans Macro Plans) and schedules, and subsequently manage efforts to insure completion of projects within time, scope and budget.

* Organizing and controlling the cost of resources (Manpower, Equipments, Materials and Subcontractors)

* During the execution phase of the work, preparing and maintaining several levels of increasing detail, time phased schedules. Providing status updates to schedules and analyzing progress, scheduling performance and variances from the plan. Obtaining and/or recommending corrective actions for mitigating deviations from the plan. Identifying and mitigating project risk areas, and developing risk mitigation plans.

* Major Projects:
1. IBN HAYYAN PLASTIC PRODUCTS CO. TAYF-1 project (A multi national industrial rush project for Saudi Basic Industries Co. SABIC.) The Petrochemical Industrial project was a three plants project with their utilities, namely an Artificial Leather Products Plant, a Wall Covering Products Plant and a Cellular Extruded Product Plant with a provisional contract value of $200M.

2. HRH PRINCE SULTAN BIN ABDUL-AZIZ CITY FOR HUMANITARIAN SERVICES.
Participated in the Monitoring and control process the Bid Packages 5,6 and 10 of the project

* Additional activities:
-Participating in three projects along with Whinny Murray Co. (Ernest Young) as a coordinator to:

1. Restructure the company
2. Management Reporting system
3. Certify the company with ISO 9002.

1997–1998 Grand Amman Municipality Amman
Building licensing and Operation & Research Engineer

* Licensing of newly established and modified buildings
* Participation in an O.R. team in coordination with the consultant office in the university of Jordan to restructure the procedures and formats used in the municipality

1996–1997 SIGMA Amman

Site Engineer / Planning Engineer
* Joined two departments of the project namely "Technical offices and Site offices to participate in several Inspection activities for Skeleton, finishing activities, project control monitoring and plan follow up".

DEGREE
BSC in Civil Engineering (University of Jordan)

LANGUAGES
Arabic (Mother Language), English, French & Turkish.

CERTIFICATION
1. Planning & Monitoring with P3e. (102)
2. Advanced Topic with P3e (106)
3. ISO 9002
4. ARAMCO Work Permit Receiver

COMPUTER SKILLS
1. Operating Systems: DOS, Windows 95, 98, ME, 2000, XP
2. Project Management: Primavera Project Planner, Primavera Enterprise, Progress reporter, Primavision, Portfolio Analyst & Ms. Project
3. Strategic Planning: Business Plan Pro & Smart Business Plan
4. Contract Management: Primavera Expedition
5. Accounting Software: Fair Knowledge of ACCPAC.
6. CAD: AutoCAD & Bentley Micro station
7. Databases: DB2, DB5, Ms. Access, FoxPro
8. Spreadsheets: Excel & Lotus 123
9. Word Processing: MS Word, Word Perfect & Adobe
10. Programming Languages: Basic, Fortran, Pascal, C, SQL, AutoLISP, HTML

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1501 to 1550 of 4371)

Go to Search Parameters...

Brief Description

mechanical engineer with 2.25 years experience in automotive field

Planning/scheduling, progress monitoring, procurement of project material, site coordination, progress reports and site co-ordination

QA/QC Engineer/Inspector

Proficient in AutoCAD with 3D applications, Basic knowledge in Microsoft Word, Excel, IntelliCAD.

Experienced Industrial Structural Engineer - concrete, steel - 20+ years, UK & US codes

detailed engineering/design of offshore rigs and ships

Senior Autocad Draughtsman (Architecture/Structure/Civil)

Ability to manage multi projects and organize all procedures on and off sites to ensure the projects are completed on time and within the budget.

KEY RESPONSIBILITIES :1. Transmission engineering in designing backbone links,2. Transmission network design, link budgeting for transmission links,4. Planning of STM-1 Ring Network in City and Backbone to have a Reliable Network with a uptime of 99.99%,6. Microwave Projections for the additional Si

Landscape Arch with varied experience of the micro and macro level design and execution of private and govt. projects

•experience performing detailed design calculations for heat transfer systems, pressure vessels

20 years in the construction industry ranging in the welding field of building food processing plants,to oil field industries,Commercial diving opperations I also aplied my knowledge toward the osha programs as a Safety Specialist started work with the Navel Stations with contract for the Navy.

50k to 100k US per Year

I have done my M.S.(Control System Engineering) from Texas A&M University-Kingsville with G.P.A as 3.9 /4.0. I am looking for a job of control System Engineer. I have work experience of 1 year and 4 months. I am willing to relocate anywhere in USA. Thanks Rajesh

OBJECTIVE Find a rewarding position, which both recognizes and rewards performance. A place where someone is able to establish their skills and be capable of learning at the same time.

Security Technician

15 years of experience in repairs and maintenance to construction plant and machinery and 10 years at supervision/managerial level Plant predominantly Caterpillar

Applying my educational experience into real life. I am particularly interested in an executive mid career position in a multi national or a well-established organization.

i am a post graduate mechanical engineer with 8-9 years of working experience in HVAC field in international environment. can lead a team of supervisors and subcontractors. knowledgeable in working. presently working with the Italian M & E contracting company (elektrint limited in Nigeria.)

Supply Chain & e-Business Management professional having 9+ years multinational experience.

Skills: Contract Negotiation, Quantity Surveying, Project Handling & Project Implementation, Quality Control, Co-ordination with various agencies involved in project

I was responsible for the daily operations of the project’s office and assist both mechanical and electrical engineers in the billing and change order process, Purchasing, preparing reports and supervising.

Experience in quantity surveying, site supervision, planning, designing over water and over land structures.

I am a Naval Architect and Marine Engineer whom objective is to provide engineering solution in a merit driven environment with an opportunity for career development to face present and future challenges.

Looking for a position with an established engineering company, utilizing previously learned skills

I am a Mechanical engineering diploma holder, over 15 years of experience with CSWIP Plant Inspector, CSWIP 3.2, AWS CWI and ASNT LEVEL II in RT, UT & MT, with valid UAE driving license.

A progressive individual with a record of excellence in the management of people, responsibly overseeing compliance of project specifications, and supervising completion of substantial commercial industrial construction projects.

is a supply professional in mining and construction. He has a proven track record of fulfilling all facets of procurement, material handling and inventory procedures.

EXPERIENCE PROFILE (7 YEARS)

I am a Full Member of International Institute of Risk and Safety Management (MIIRSM) and Technician member of Institute of Occupational Safety and Health (Tech IOSH) .Have expertise in working in ISO-9001, IS0-14001 and OSHAS 18001 environments.

MEP Manager with 14 years of int'l exp. in construction. Verify design, construct and commission. Executed prestigious & high rise buildings project which MEP works value in excess of US$380 M. Supervise and coordinate work acc. to contract ,budget, time, co. procedures & ensure client satisfaction.

site engineer for a land development project that covered earthworks and HE utilization, roadworks, driange, waterline and housing projects on mass housing and medium scale units

i have passed Degree(B.E.) in mechanical engineering with spl. in welding technology and now i am working as a welding engineer in boiler making company from 2 and half year. my job profile is making WPS,WPQ,PQR, TDC, and shop floor inspection.

i am 25 and in sydney on a 12 month visa im from England,i have a NVQ level 2 in bricklaying and concreting i have 5 years experience.

MECHANICAL ENGINEER WITH EXPERIENCE IN DESIGNING

VP metallurgist with MBA. Extensive experience with 20+ years experience in manufacturing and operations, working in the USA, Canada, and Australia.

Scaffolding. Superintendant,Supervisor,Inspector,Instructor

AWS, Certified Welding Inspector / Welder

Nace level 3 coating inspector, CINI certified insualtion inspector & Chartek certified fireproofing inspector.

Contracts Manager; Procurement Manager; Subcontracts Administrator; Contract Administrator; EPC oil & gas downstream construction.

A proven Boiler Maker/ Combination Welder highly skilled in the areas of aluminum, ferrous and non-ferrous(CS, SS), exotics(Alloys), and next generation metals. Qualified under ABS, AWS, ASME, NAVSEA and Mil-Standard 248 to do all plate and pipe welding on non-nuclear systems.

A Certified Human Resources Professional with practical and progressive experiencein Africa, Central America, Canada, USA, Central Asia and the Asia-Pacific region.

A Wide experience in drafting in major of civil works, structural, mechanical, Piping & Instrumentation and architectural drawings, 8 years of overseas experience,Overall 15 Years of working experience in civil, structural, mechanical, piping, and architectural firms

More than 13 years post qualification experience out of which 7 years in Occupational Safety and Health, (4.5 years in oil and gas sector) interested in the development of modern techniques in the construction and oil field industry

Welding all rod types: M.I.G., T.I.G, all plastics, oxyacertylene. Equipment repair and maintenance of all machinery for use in metal working shears, brakes, manual cutting, machine cutting. All machine shop equipment, lathers, radial arm, drill presses, and iron works.

Electrical Engineer ( project & design) with more than13 years of experience with MNC in India, Japan , Middle East for Oil and Gas, Petrochemical, Chemical, Power.

PROFILE: Proficient in shuttering works, Steel reinforcement & fabrication, pipe fittings

I am a Senior Planner/ Project Controller with certified versatile capabilities and experiences in different fields of construction, including, but not limited to, Building construction, massive civil work, industrial construction, petrochemical construction, commercial complex and high rise buildin

Administrative, Sales, Strong Customer Service

15 years Accounting / Administrative experience in Australia. Currently visiting South Africa but ready to move on and explore more of the world.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 [ 31 ] 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out