Resume - Twenty Three (23) + years hands on Industrial, Commercial and Utility Electrical...

Misco Jobs

Resume #2303

CONTACT INFORMATION:
View contact information...

Objective
I am seeking a career opportunity, which will utilize my education, training, supervisory experience and knowledge in the field of Industrial I/E construction and electrical utility power and controls.

Education

1960 to 1964 Freer High School - Freer, TX. - Graduated
1966 to 1969 Capital Radio Engineering Institute, Washington DC - Associates Degree in
Industrial Electronics. (Three-Year Course)
1996 to 1997 National Center for Construction Education and Research - Graduated
Gainesville Florida: Electrical Basic and Advanced Instructors Course

Technical Qualifications:
* High Potential Testing of Medium and High Voltage cabling * Ground Resistance Testing
* Turnaround / Outage coordination and inspection
* Project Management * Superintendent * Project planning and Scheduling
* Megger Testing of low voltage cables motors etc. * Infrared Testing
* Protective Relay testing and setting * Instructor of startup and safe work procedures.
* Pre/ Post-installation testing of switchgear equipment. * Switchgear and Circuit sizing.
* Site preparation/layout inspection. * Construction Estimates and Material Procurement.
* Preventive Maintenance Program Development.* Field Engineering

Advanced and OJT Training
* Basler Controls: Voltage Regulation Seminar * Woodward Controls: Automatic Synchronizing School
* Square D: Variable speed controllers training * Training for the proper use of High Potential test equipment
* Stewart And Stevenson Inc.: Generator and Controls Start up School
* Cutler-Hammer: Low, Medium and High voltage switchgear training for installation and maintenance.
* Training for low, medium and high voltage power line construction and supervision provided by Central
Power and Lighting Co.
* Additional training for medium and high voltage substations in design, construction, Inspection and testing provided by Colwell & Associates Consulting Engineers Inc.
Summary of skills
Certified Electrical Instructor Through (NEC),basic electrical theory, procedures and advanced electrical theory.
Twenty Three (23) + years hands on Industrial, Commercial and Utility Electrical Field experience including installation and maintenance of low, medium and high voltage switchgear, distribution and transmission lines, substation, inspection and coordination, supervise and perform electrical construction, troubleshooting and maintenance/repair.
Excellent Safety record, skilled in training of technical Apprentices and team concept activities.
Skilled in writing programs and procedures for maintenance and operations procedures.
Computer skills include but not limited to windows, Microsoft Project, Word Perfect, Excel and Primavira P-3 for planning and scheduling.
Work History:
2000-Present Senior Engineering Technician - Colwell & Associates Inc., Corpus Christi, TX.
Consulting Engineers
City of Corpus Christi, Texas. (Contract Assignment on going, presently on call)
Supervised and perform major maintenance and repair for all 4160-vac switchgear for water treatment and wastewater plants including distribution and transmission lines, substation, electrical construction, troubleshooting.
Eaton/Cutler-Hammer, Maryland. (Contract Assignment)
Inspected all medium and high voltage installations engineered by Colwell and Associates, including switchgear (ranging from 480 vac to 69 kV) and primary pole line construction. Coordinated the dismantling of a high voltage breaker testing facility. Documented wiring and supervised crating and shipping of the facility to new plant in Mexico.
Coastal Refining, Texas. (Contract Assignment)
Created the standard program of electrical preventive maintenance for Coastal (now Valero) Refining Company. PM program included scheduling for general maintenance inspections, as well as, major maintenance on the following equipment: switchgear (480-vac to 12.47kV), breakers and switches 480vac to 69kV, cables and splices, oil-filled transformers (480-vac to 69kV), bus duct, hi-potential testing, overhead feeders equipment and hardware, capacitor banks, infrared testing for hot spots, 69kV incoming power connections and oil-filled 12.47kV distribution switches.
Coastal Refining West Plant, Texas. (Contract Assignment)
Supervised and inspected the re-conductoring of a 12.47kV feeder from the Coastal 69kV substation #2 to a smaller substation at the El Paso Natural Gas – Origin Station Pump Station. Procured equipment and materials for the job. Coordinated safety procedures for contractor and Coastal's electrical personnel on a daily basis. Surveyed, developed plans and generated a construction estimate for replacing all 12.47kV oil switches with newer and more dependable vacuum switches. Created implementation plan to minimize downtime during changeover.

1998 – 2000 Electrical Instructor - Citgo Refining, Corpus Christi, Texas.
(Contract Assignment through Rabalais Electric Company)
Designed curriculum and conducted electrical training courses for plant operations personnel. Lectures included electrical theory, materials and equipment, measurement techniques, maintenance of equipment, grounding and blueprint reading, substation and power distribution controls. Hands-on training included routine maintenance procedures, splicing/terminating cables and safe work procedures. Written and practical examinations were administrated to each student prior to course completion.
1997 – 1998 Instrumentation and Electrical Superintendent, - Bay Ltd. (a Berry Co), Corpus Christi, Texas.
(Contract Assignment)
Supervised the electrical and instrumentation construction of an iron carbide processing plant built in the Corpus Christi area. Installed all switchgear for 4160 vac motors as well as 12.47kV motors. Assisted in startup and testing of medium voltage switchgear. Supervised all electrical inspection as well as instrumentation. Peak I/E staffing was over 100 craftsmen and apprentices on site.
1994 –1996 Sr. Electrical Designer/Inspector - Colwell & Associates, Inc., Corpus Christi, TX.
(Contract Assignment) Consulting Engineers
Provided electrical designs for medium and low voltage substation and electrical distribution projects. Performed field investigation work to determine as-built conditions and obtain relevant design information. Developed one-line diagrams and layouts for existing and proposed facilities. Performed electrical calculations for switchgear and circuit sizing. Selected and specified materials and equipment. Projects included 12.47kV distribution substations and 4.16kV motor control centers. Followed job from start to finish and performed all inspection of electrical contractors work and progress.
1992-1994 Senior Electrical Designer/Inspector - Indtech, Corpus Christi, Texas. (Contract Assignment)
Transamerica Refining Co. New Sarpy, Louisiana. (Contract Assignment)
Created installation drawings, one-line diagrams, wiring diagrams, motor control schematics. Assisted construction and trained operators. Generated material requisitions. Evacuation alarm system for the West Plant, power distribution to pumps, fin fans, compressors, motors, etc. in the West Plant. MOV's power and controls in the West Plant and flare monitoring system in the East Plant. Supervised all installations of switchgear including motor control centers ranging from 480 vac. to 4160 vac. Assisted in testing equipment and setting protective relays to proper values.
Koch Refining Co. Corpus Christi, Texas. (Contract Assignment)
Provided drawings: one-line diagrams, wiring diagrams, motor control schematics. Assisted construction, material requisitions and construction bid packages. Flare reduction control and shutdown system for the entire plant. Power distribution to pumps, fin fans, compressors motors, etc. Inspected all Electrical construction efforts to insure all Company standards as well as NEC rules and regulations were followed.

1990-1992 Sr. Electrical Designer/Inspector - S & B Engineering & Construction, Houston, TX
(Contract Assignment)
Provided installation drawings with plans and assembly details, one line diagrams, wiring diagrams, motor control schematics, assistance to construction, material requisitions and construction bid packages. Also assisted with high voltage equipment installations and testing. Inspect high voltage installations as required.

1980-1990 General Superintendent/ Electrical General Foreman - Industrial Electric Corp. of Texas

1983-1990 General Superintendent Responsible for all construction efforts in the oil field with a staff of direct reports (up to three) General Foremen. The company was involved in oilfield construction, which included building primary (7.2kV-12.47kV) and secondary (480 Volts) pole line construction to support oilfield production including pump stations. The company also built the transformer banks and 480V distribution to the individual wells and or pumps stations as needed to produce the oil field. The company also provided electrical construction efforts for small skid mounted gas plants, which were located all across the State of Texas, Louisiana, New Mexico and Oklahoma. Built up to six (6) (12.47kV) substations, distribution lines and the individual transformer banks. Supervised from 30 to 60 men working in various areas. The smaller jobs may require 6 men and larger jobs would require up to 20 depending on the job requirements.

1980-1983 Electrical General Foreman Responsible for 3 crews (Normal manpower per crew was 2 journeymen and 2 helpers or total of 12 employees) Working electrification projects in the oilfield which included all underground installations and overhead installations to provide 480 voltage distribution to the oil pump jacks, including control boxes switches etc.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 801 to 850 of 4750)

Go to Search Parameters...

Brief Description

Time served and fully qualified NVQ 3 Rigging & Lifting Supervisor, appointed person, trained trainer, with over 30 years behind me in the industry on and offshore, on many world wide locations.

Senior Piping Designer with 20+ years experience. AutoCAD, AutoPlant, Excel, Access, Word, Outlook.

Engineering / Construction Management

Looking for job in equipment maintenance and repair

A certified Engineer-in-Training. Possess a Master of Engineering Degree in Civil Engineering from the University of British Columbia, Canada. Worked as an Assistant Project Manager with the California Department of Transportation.

Twenty Three (23) + years hands on Industrial, Commercial and Utility Electrical Field experience including installation and maintenance of low, medium and high voltage switchgear.

Using FEM packages (COSMOS, ALGOR) to analyze structures and components (Stress, Stiffness, Fatigue, etc). Document drafting and review (Calculations, P&IDs, MITPs, etc.).

Self-motivated executive, MBA, experienced in Plant start ups, manufacturing, Operations, Quality Systems Implementation, Lean manufacturing implementation & Training. Green Belt Certified and Auditor Certified.

I am applying for a Maintenance Supervisor, Chief Mechanic or Rig Mechanic position. Please see my attached C/V. I am very interested in working offshore but have 7 years experience on land rigs. I do have my BOSET course and have updated my other certificates. I realize that I don’t have the offsho

Possess high standards of organizational skills, work with minimal supervision, have the ability to prioritize workload, team player and self-motivated, ambitious and goal-oriented with a clear vision of future objectives, open-minded and resourceful, with an enquiring mind and optimistic outlook.

Diploma in Occupational Safety(OSHAS)

Preparation of documents, materials,and equipments.hauling of materials., Schedulling works. fabricate, erection, installation.

I am writing to introduce myself to you as a future graduate of University of Texas at Arlington. I will be graduating with a Master’s in Civil Engineering in December of 2009.

Provide structural engineering, construction management, real estate due diligence and expert witness services.

Cost control / planning engineer with 7 years exp.

Preparation and submission of quotations, Site supervision to ensure safety and timely completion

I have diversified vast professional experience in the construction industry. Have managed and worked with complex competitive challenge projects and have implemented them successfully with efficiency and quality. Expertise in Project Manger, Expertise in Checker, Expertise in Project

„X Diversified and proven experience in program management & development of infrastructure projects, including highways, rural roads, jeepable tracks, water supply, sanitation and irrigation schemes with regards to social mobilization, planning, implementation, contract administration

NUCLEAR SAFETY ENGINEER / NEBOSH INTERNATIONAL

12 years work experianc in plumbing supervisor/engineer

Microstation 2D & 3D Designer

Senior executive with 17 years experience with MEP, design build, G .C., PM firms and owners side construction. New business operations, new division creation with demonstrated success in entrepreneurial environments. Projects consisting of ground up construction, renovations, commercial

Welding Supervisor: SSCL.DME (3years welding), WI (QA/QC), Safety qualified,21years Experience, worked with ASME, AWS, API standard in Major EPC Industries such as Onshore, Upstream ,Petro-chemicals (Offshore piping & Structures, Oil & Gas Piping, Steam Boiler Piping, HP vessels & Storage Tanks) .

Water Resources Hydrologist and Civil Construction speacialist

I am Mechanical Engineering graduate from India and having more than 20 years of experience in the industry. I would like to stick to my last employment of Facility Manager.

I am a 41 year old Civil Engineer with over 20 years of "hands on" construction experience. However, I have only had a Civil Engineering degree for 2 years.

Refinery, tank farms, pipelines, gas plants, flow stations and production units. Engineering, procurement, construction and testing/commissioning.

I m land surveyor and my experience in all types of Survey work in road, Concrete structure, Buildings, Steel structure, Pipe lines, Drainage & Underground mines Survey.

Internationally Experienced Heavy Equipment Mechanic - Workshop Supervisor

Young, energetic and high qualified engineer in construction works. Well experienced especially in Marine and Civil Construction in Midle East and Asia countries such as: UAE, Vietnam, Cambodia, Singapore, and Indonesia.

MD. RIYAZ AHMED

Heavy equipment operater excavater,backhoe any controls, all dozers, scrapers, finish blade hand project manager,estimater, under pipe line superintendant,mass grading superintendent

Coatings Contractor

I am an well experienced document controller/handover documents coordintor, compiilng health&safety files, asset maintenance documents, and extensive use of document tools.

Civil engineer

I can maintain, repair, disassemble & rebuild any piece of Heavy Equipment, Mining, Drills, Scoops, Shovels, loaders, dozers, Tractors, earth moving equipment, on & off road, transport trucks & trailers, logging, forestry, & construction. Propane, Diesel, Gas, Electric, and Hydraulics,& more

working as csu saferty officer in sabic,I am having Industrial safety diploma from annamalai university.chennai

3d/2d Autocad Operator

Autocad, Structural engineering, Drafter Design

Seek a fulfilling position that will allow me to fully contribute my knowledge and skills acquired through my work experience in my chosen profession. To gain more challenging and rewarding career.

Pipe superintendent in fuel gas and coal fired powerplants

Payroll Professional specialized in the field of Construction, Engineering, Trading & Service industries. A dedicated, proactive and target oriented team player, possessing strong communication skills, with the ability to meet demanding targets. Looking for Accounts/ Finance/ H.R/ Admin position

MS in Civil and Mechanical Engineering, in Alaska, Russian and English language, experienced in Numerical Wave Modeling, Coastal Engineering, Hydrographic Survey, adaptable to changing projects and work schedules and have a proven ability to quickly train on different subjects.

Structural Engineer, Ph.D., P.E. 10 years experience in structural analysis/design of commercial and industrial buildings, and schools.

Environment & Machine Control with experience integrating PLC's, HMI's, VFD's, Networks and Radio.

A GIS/CAD specialist with 20 years experience in the field of business, urban planning, and GIS

Competent Project Controls specialist with Estimating, Claims Management and Risk Management skills. Experience spans 35 years in industries including Nuclear, Fossil and Hydroelectrioc power, Oil and Gas, Refinery and LNG plants. Multi-discipline estimating skills at all levels from FEL onwards.

A challenging opportunity in the management, engineering or sales field

I have over 20 years experience in all aspects of electrical work i.e. construction, testing and inspection and commissioning both at home and abroad, onshore and offshore.

Highly dedicated senior manager with extensive knowledge of Project Management, Construction Management, RF Design, and Site Acquisition.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 [ 17 ] 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out