Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #2410 next resume »»
CONTACT INFORMATION:
View contact information...

CURRICULUM VITAE

Date of Birth: 28th April 1970
Driving license: UAE valid till July 2011
Martial status: Married

Educational Qualifications
Graduate Degree (B.E.) in Civil Engineering – Passed in 1991 with First Class from India.
A+ Modeler Certification from Current Methods on Water Distribution Systems.

Computer Awareness
SAND (Structural Analysis & Design), STAAD.Pro 2002, WaterCAD (Hydraulic Analysis), PIPECALC,
MS Project, Word and Excel.

Professional Experience
12 years as Civil/Structural Engineer in the Oil, Gas, Power, and Water Sector.

Thorough knowledge in the preparation of Structural Calculations (Concrete and Steel), General Arrangement drawings, Detailed Reinforcement drawings, Site Layouts, Architectural drawings, and Drainage and Water supply drawings.

Done the design and drawings of following Projects/Structures/Structural elements:- Power Stations, SVC Plants, Sub Stations, Control Buildings, Desalination plants, Water Reservoirs (3.0 – 10.0 MIG), Generator Stations, TXR Bays, Oil Storage Tank Farms and their Foundations, Post Tensioned Concrete Bridge (600M long), Pedestrian Bridge (100M long), Health Club, Commercial Buildings, Pipe Racks, Pipe Supports, Flour Mills, Silos, Sea Water Pump Houses and Water Supply and Distribution Pipe Lines

Done Finite Element Analysis of Rafts, 3D, Wind, Seismic, and Temperature Analysis for various Steel and Concrete Structures, Crack Width calculations, 'U' Value calculations, Road and Culvert Design to SLW60 Wheel Loads, Pile and Pilecap Designs, and Hydraulic Analysis of Water Distribution and Transmission Pipe lines.

Experienced in using the following codes:- BS 8110 Part I, II AND III, BS 8007, BS 8004, BS 6399 Part I and II, BS 5628, BS 5950, UBC 1997, Road Note 29, CIRIA Guide, AISC, AISC LRFD,etc.

* Independently executed several projects as Civil/Structural Engineer responsible for all Deliverables, Cost, Schedule and Execution of the Project involving a team of Architects, Engineers, Designers, Draftspersons and Site Supervisors.

* Prepare Man-Hour Estimates, List of Deliverables and Schedule.

* Prepare Design Basis, Scope of Work, Specifications, Bill of Quantities, Cost Estimates and Other Tender Documents.

* Preparation of Architectural, Structural, Drainage and Water Supply Drawings

* Carryout Structural Analysis and Design (Including Earth Quake and Wind analysis) using the latest Industry Software.

* Techno-Commercial Evaluation of Tenders and Assist the Client during Contract Award.

* Review of Shop Drawings, Structural Calculations, Pile Designs, Form Work Calculations, Soil Investigation Reports and Material Submittals by Contractors.

* Coordinate with Municipality, Town Planning Department and other Consultants and obtain Plot approvals, Service Reservation Approvals and Building Permits.

* Hydraulic Analysis of Water Transmission and Distribution Lines using WaterCAD or Cybernet.

* Ensure compliance to QA Procedures for project activities and participate in ISO 9001 QA audits and internal company audits.

Feb. 2002 to date DERBY DESIGN CONSULTING ENG, Abu Dhabi.
Senior Civil / Structural Engineer

* Shuweihat Combined Cycle Power Plant for Emirates CMS Power Company. (Project cost US$. 800M )

* Replacement of Electrical Power Skids for Water Injection Clusters at Bu Hasa for ADCO.

* Mess Hall and Leisure Centre at Bu Hasa for Gasco.

* Static Voltage Compensator (SVC) Plant at Mussafah, Abu Dhabi for ADWEA.

* Generator Halls and Switchgear Buildings for Presidential Palaces.

* Construction of additional Reservoirs at UNIT I, II and III for ADWEA.

* 132kV Sub Station E18 at Abu Dhabi for ADWEA.

Jan. 2000 to Feb. 2002 PENSPEN INTERNATIONAL (PENCOL), ABU DHABI
Civil / Structural Engineer

* One Fire Water Tank, Four Crude Oil Tanks and Related Structures for QP, at QATAR. Platforms, pipe supports, culverts and external works.

* 4.0Km Long concrete Pipe Rack and Pipe Bridges at Ras Laffan for QP.

* Das Tower Long Term Repair Works for ADMA-OPCO at Das Island. Structural Analysis and Design of existing Das Tower building to check the structural integrity.

* Full Surface Fire Fighting Facilities For COS Tanks for ADMA-OPCO at Das Island.

* Asab IP Transfer Line Reinstatement and IA Line Replacement for GASCO.

* Shuweihat Water Transmission Scheme for ADWEA. ( Project Cost US$ 750M.)
The scope of the project include 10MG RCC Reservoirs (6 Nos.), 140m x 40m Pumping Station,
Site Development, External Works and 1200mm and 900mm dia. downstream pipework to Mussafah and Al Wathba.

* Water Transmission and Distribution Projects for ADWEA/ADDC/TRANSCO.
1200mm dia. Transmission lines to 150mm dia. Distribution lines outside Abu Dhabi Island.

Dec. 1993 to Jan 2000 DERBY DESIGN CONSULTING ENG, Abu Dhabi.
Civil / Structural Engineer

Power Projects

* Administration Building (G+2) - Taweelah A2 Power And Water Project For Emirates CMS Power Company.
* 400 kV Substation, Control Building, Transformer Bays and Reactor Building at Mussafah Grid Station, Abudhabi for ADWEA.

* 220/33 kV Substation at Al Oha and Al Salamat for ADWEA.

* 132/11kV Substation at Madinat Khalifa for WED.

* 132/11kV Substation W17 (B+G+4) at Abu Dhabi for ADWEA.

* 132/11 kV Substation W1 (B+G+4) for ADWEA.

* 5 Nos. 33/11kV Substations at Mussafah & Mina for W.E.D - E12, P5, ME12, MW5 & M34.

* Artificial Islands in sea for 400 kV Overhead Line Towers from Taweelah to Abudhabi.

Desalination Plants
* 2 Nos. x 3.5 Million Gallon per day MEV-TVC Unit 9 and Unit 10 Desalination Plants at Umm Al Nar for ADWEA.

* Relocation of One Million Gallon Per Day Reverse Osmosis Desalination Plant from Mirfa to Sila for WED.

Oil And Gas
* Foundations for Oil Storage and Fire Water Tanks of various sizes ranging from 24m to 40m dia. and 10m height, at Multi Product Storage and Distribution Depot. for ADNOC FOD.

* Design of temporary supports for ADNOC - concrete repair works.

* 132kV Substation at Bab and Asab for ADCO.

Bridges
* Preparation of detailed drawings for Post Tensioned Concrete Bridge (600m Long) at IP-69 for Abu Dhabi Public Works Dept.

* Pedestrain Bridge (100m Long) at Fifth Floor Level Between New and Old Etisalat Buildings in Abudhabi.

Commercial Buildings
* Administration Building (G+3), Accommodation Blocks (G+3), Workshops etc. for Abudhabi Ship Building.

* Health Club, Fish Restaurant, Plant Rooms, Changing Rooms, Pool Bar etc. for Sheraton Hotel, Abu Dhabi.

Other Industrial Structures
* Hawk Hangar for Directorate of Military Works.

* New Packing Building (G+5) for Abu Dhabi Flour Mills.

* Telecom Building (B+G+4) at Musallah for Etisalat, Abu Dhabi.

* Sea Water Pump House & Related works at Sila for WED.

* Underground Tunnels and Technical Building, Grand Mosque, Abu Dhabi.

July 1992 to Nov. 1993 KHANSAHEB CIVIL ENG. DUBAI
Structural Engineer

Chicago Beach Resort Development - Dubai.

* Conference & Banqueting Centre
* Sports Centre
* Underground Car Park
* Underground Tunnels And Services Building

June 1991 to July 1992 ROOP REKHA ARCHITECTS & ENGINEERS, INDIA
Structural Engineer

Detailed Design of Multi-Storied Buildings, Preparation of detailed drawings and Preparation of
Specifications and BOQ.

References will be provided on request.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1451 to 1500 of 4814)Go to Search Parameters...
Brief Description
3 years diploma in mechanical engineering
LAND SURVEYOR
MicroStation 3D Modeler
Knowlegeable on 2D&3D AutoCAD Drafting, ArchiCAD, Vectorworks, Photoshop, Office Apllication, - Word and Excel, Outlook , Internet, Manual and Computerized Rendering, Mechanical/ Conveyor Technology (as per ASTM, ISO, JIS, and Other Drawing Standards), well versed on the English System Units.
Electrical Project Manager 20+ years experience
Master Operator with exceptional work ethic.
MapInfo professional 6.0, 8.0, 8.5,,Schema BTS Ultima,TEMS investigation 3.1, 4.1, 5.1, 6.1.3 Agilent, Nemo for drive test (Data collecting tools
Bachelor of Science in Construction Management,National Certificate in Construction studie· Advanced in AutoCAD 2006. Broad knowledge of building trades. Carpentry, Plastering ,Tiling, Plumbing
NDT Level II Magnetic Inspection and Penetrant Inspection
To achieve a job as ¡§Safety Professional¡¨ in an augustive organization where I can deliver the best of my performance implementing managements safety policies and procedures
I am a certified lead auditor in ISO ¡V 9001, OHSAS 18001, ISO 14001 standards.
Have worked in all departments of construction project sites, well knowledge in computers
Licensed Civil Engineer, exposure to project / construction management for 8 years, assigned to do field and office engineering works like field inspection, work monitoring, and cost estimates for 3 years, familiar with basic forms of contracts-FIDIC, CIAP, computer literate - MS office application
I¡¦m a B.E.,(Mechanical Engineering) graduate, graduated from Bharathiar University, Coimbatore (South India) with First class during the year 1992. I have a rich 12+ years of experience in various fields mainly in the area of projects Execution.
I AM A MECHANICAL ENGINEER WITH 8 YRS EXP IN MANAGING PROJECTSITES AT BPCL,IPCL IN INDIA,FABRICATION AND ERECTION OF PIPELINE,MAITENANCE OF PIPELINE ERECTION OF EQUIPMENT PRESENTLY IN DUBAI ON VISIT VISA AND LOOKING FOR EMPLOYMENT IN UAE.CAN SPEAK BOTH ENGLISH AND RUSSIAN LANGUAGE.
Target oriented professional with excellent leadership skills, proactive attitude and mastering strong inter-personal relations with people of different cultures.
worked as junior engineer on various projects around the world. Adapt easily to harsh conditions.
I am searching for employment with a company that has satiability and longevity.
Total Experience is of twelve Years encompassing Senior Civil Engineer for Eight Years and Site Engineer for Five years and as a professional experience in Project engineering for Major Construction Projects in the Middle East & India.
Over Ten (10) Years of solid working experience in the sales and customer service environments for Radiology Equipment & Spare parts, Laboratories Equipment & Accessories, Nuclear Medicine, and QC/QA Test Tools. Maintain excellent customer service skills and a proven record as a top sales performer.
20 yrs exp residential contractor
Mechanical engineer with nearly 13 yrs experience in petrochemicals and power plants as project and maintanence engineer
MICROSTATION V8
Passed the licensure examination for Civil Engineers last May 2008. Have 1-yr experience in construction managament. Have knowledge on Excel and CAD Programs. Hard working. Good in oral and communications skill.
3 years working in the construction site with arabtec u.a.e. projects such as dubai airport, DIFC, and now in infinity tower
Skilled painter with experience in the industry.
ERECTION AND COMMISSIONING ACTIVITES
Senior Estimation Engineer for oil and gas construction projects
Circa 30 years work experience (10 years Middle-East / Africa)
25+ years Upstream Project Controls Management across all stages of Oil & Gas E&P Business Process Life Cycle:
Presently I am working in Wade Adams Dubai As a Health&Safety Officer
M.E. Civil in Transportation Engineer with I-Class
Passed out Diploma in Instrument Engineering through NATIONAL POLYTECHNIC from July’ 1993 to May’ 1995
I am a QA/QC Engineer with over 8 years experiences currently work in Saudi Arabia as a Senior QA/QC Engineer ( QC Supervisor ARAMCO SAP No. 70009461 in GAS Plant ( 3 Sulfur recovery units and 3 Gas Sweetening Units...) Kindly check the attached CV for all details.
Preparing quantity schedules and bills of materials managing project costs and performing cost analysis. Managing different project quantities related to the implementation of the project such as, materials, equipment and resources. Forecasting project quantities and ensuring that construction costs
Heavy equipment operator over 20+, Body Work and Custom Paint 20+ and Welder 10+
Able to prepare welding procedure/ welder qualifications, organize for hydostatic test and witness the same, prepare the final dossier for the project and submit to the commissioning team. Diploma in electrical and electronics engg, AWS Ceertified welding inspector and Level II in RI, MT,PT
Nine years of mechanical engineering experience: One year working as client mechanical/facilities lead engineer on major offshore FEED BOD. Two years providing engineering, procurement and construction management services to onshore oil & gas producers and pipeline transportation companies.
Implementation Manager or Technical Project manager
Interprets plans, conducting quality control as inspector, preparing welding procedures as a welding engineer, and controlling/monitoring project activities/ preparing documents for the fabrication of boiler components shall hopefully contribute to your requirements.
I am Design Engineer. My most recent experience was design an automatic steel strip coil tensioning and recoiling line . I was responsible for the overall product design, workshop drawings and hydraulic and pneumatic circuits. I developed the first draft of the operator's guide.
for a vacancy in your organization for Quantity Surveyor / Civil Engineer.
Five years experience as a Journeyman Boilermaker, working as a welder, rigger and mechanic. I also have 18 yrs. experience in glass manufacturing where I started as a maintenance mechanic and worked my way up to batch and furnace Dept. manager.
With more than 12 years in Petrochemical and Paper industry and in various positions and discipline.
I have been in electrical construction for 12 years, 3 years in management of electrical construction. I am interested in working overseas for short or long term projects. Please call with any interest.
12 YEARS EXPERINCE IN CIVIL/STRUCTURAL ENGINNERING EXPERIENCED IN USING BS AND US STANDARDS. POWER PLANTS, OIL AND GAS, DE-SALINATION PLANTS, SUB-STATIONS, SVC PLANTS, TANK FARMS, AND VARIOUS OTHER INDUSTRIAL STRUCTURES.
Contracts Engineer, Cost Engineer, Quantity Surveyor
I am an electrical Engineer having experience in Power and process Plant, control system, planning,design and execution etc.
Graduate Civil Engineer working as Senior Quantity Surveyor with over 13 years of experience in construction industry ranging from Bridges, Highways and Building structures. I have also been designated as a Certified Cost Engineer by the AACEI in October 2008. Well versed with FIDIC, CESSM3 & POMI
I have experience in handling personnel working on distribution lines. I can easily adopt to work environment related to Electrical Engineering.
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   [ 30 ]   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com