Resume - I have a total of 20 years in heavy construction Safety

Misco Jobs

Resume #2429

CONTACT INFORMATION:
View contact information...

OBJECTIVES:

To find a company that places the utmost importance on safety in the work place as well as providing an environment, which will allow further education and growth in the health, safety and environmental field. It is important to have the backing of management in all aspects of safety compliance issues. Together a zero incident rating can be achieved.

PROFESSIONAL EXPERIENCE

FLUOR ALASKA INC. Shemya Island, May 2002 to Oct 2002
Sr. Safety Supervisor / Manager, BMDO Test Bed Project

The primary duty of the position was to manage the sub-contractors in all aspects of health, safety and environmental. This was accomplished by: Held startup meetings on their safety programs and making sure they complied with all Fluor safety policies and contractual requirements. Taught classes to handle the potential work site contaminates and the proper procedures for disposal. Managed the emergency response team for both employee injuries and contaminates. Conducted extensive training classes for all employees on and the correct precautions to be taken when unexploded ordnance were discovered on the island, also covered the areas that were considered off-limits. Performed air monitoring on all excavation sites for detection of contaminates.

Other duties were to keep the Army Core of Engineers apprised of all activities pertaining to the projects safety and weekly audits. Meetings were performed in advance of any new task where there might be a risk of injury to a worker. Maintained all medical records of employees on site. Provided security for all Fluor and sub-contracted employees. Conducted weekly inspections and audits of all sub-contractor's equipment and Fluor job site activities for office and field employees

VECO ALASKA INC. Anchorage AK, March 2002 to May 2002
Safety Supervisor, Oil Field Project

Responsible for providing safety and training on oil field construction projects and the reporting of any accident or injury to the employee or property. Daily reports on safety issues were delivered to the client and the headquarters of Veco Alaska. I conduct safety meetings on a weekly basis along with a daily toolbox meeting. Lead a safety committee comprised of the employees, which meet once a week to discuss safety issues. We took these issues and acted upon them. This led to a zero incident rate and an better working relationship between the safety department and the employees. I also have put into place a weekly safety audit sheet, which is checked every day to insure that we are in compliance with OSHA standards.

H.C PRICE Anchorage A.K, March 2001- March 2002
Safety Manager,

Lead the safety program for new pipeline construction projects. These functions consisted of having startup meetings with the clients. Organizing the union craft hands on their orientations and startup procedures. I also conducted weekly safety meetings, and managed all reporting of safety stats to the client. I coordinated a safety incentive program between the client and the sub-contractors. Held mandatory meetings on Job Hazard Analysis, Phase Hazard Analysis, and Authorization to Proceed with management and employees. These are procedures that involve the crew participating in the planning of task to be performed. This gave everyone a voice on safety concerns. Audits were performed on the other projects and evaluations passed on to the management of the company with my recommendations on changes.

STEWART'S WELDING & MARINE SERVICES 1982-1999
Owner /Operator

This is a company that I owned and operated for 17 years. Contract work for oil field service companies was my main focus. Halliburton and Brown & Root would sub-contract me to do various projects. During the clean-up of the Valdez oil spill I moved the company to Valdez and picked up the maintenance on the barges being used for support in the clean-up of the sound. We worked closely with Alyeska safety department. Performed periodic maintenance with Crowley, Tidewater and Sampson Tug & Barge. I also held a Coast Guard welding certificate during this time.

FRYMIRE ENGINEERING Austin Texas, 1987-1988
Safety Supervisor for new Construction Projects

Safety supervisor for the construction of the South Austin Community Hospital. Daily duties included all safety responsibilities and the training of the new hires. I was also responsible for inspections throughout the site. Presented weekly progress reports and internal audits for hospital staff and project management.
BANNER MECHANICAL Austin Texas, 1983-1986
Safety Manager

Oversaw the building of three pharmaceutical plants. Managed seven safety engineers and all safety activities in each plant. Meetings were held to review hazards of each task performed by the craft personnel. Responsible for safety training matrix for each plant under construction.

TEXAS CEMENT Austin Texas, 1978-1983
Welder/ Operator/ Safety Supervisor Plant Maintenance

I was in charge of all plant safety matters with subcontractors. I held safety meetings on a weekly basis. Monitored all reporting of incidents and set up a committee which focused on lessons learned, Also responsible for safety in blasting operations, responsible for notifying flight operations of a blast. Taught confined space entries in towers and bag houses.

EDUCATION

University of Texas, Austin TX.

AREAS OF EXPERTISE
Process Safety Management (PSM)
Refinery and Heavy Construction
Voluntary Protection Program (VPP)
Gas Plant Maintenance
Risk Management Program (RMP)
Root Cause Investigation
Chemical Disposal
On-Shore / Offshore Drilling & Production
OSHA 500, 501, CFR 1926

ADDITIONAL EDUCATION

NSTC Refresher Trainer
Simms Train the Trainer
Certification on Fire Extinguishers
Confined Space Training
Environmental Waste Management Training
Presently Studying for CSP, CHST

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 901 to 950 of 4374)

Go to Search Parameters...

Brief Description

Moving to Georgia Thomaston Area need work.. by 4/01/04

35 continuous years of national and international commercial construction experience

The resume summary is included in the resume.

I am very experienced and have worked at all levels worldwide and also worked with many nationalities. I work very hard and get on well with everybody.

Mechanical & Electrical Engineer Location East London, Essex, Kent, Greater London Salary To £30,000 plus package

Safety Manager seeking position

Crane Operator

Civil Engineer with solid background in structural design, experience working with oil companies. Project supervision experience, costing and evaluation. Vast field experience leading working crews and supervising jobs. Good communications skills. Multilingual, speaking Spanish, French and Italian.

Experienced in power plant operations and startup.

international c.v.

Mining Engineer and Geologist with twenty-seven years’ experience in precious and base metals, coal and industrial minerals. Professional Engineering licenses in three states, with unique construction and engineering achievements. Advanced technical and strong supervisory skills.

Work Experiences : Mechanical equipment and piping installation in the following industrial plants: 1) Natural gas plant 2)Power plant 3)Polypropylene plant 4) Oil Refinery 5)Desalination plant 6)Steel mill 7)Foundry plant(maintenance of mechanical equipment)

I have been working in construction industry for Oil & Petrochemical Plant for decades. I work well under pressure and very keen on project planning and management. I am confident in leading a team of sub-contractors in performing sophisticatedly for any petrochemical processing plant.

NACE Certified Coating Inspector #7278, with +20 years of experience, available as (3rd party) Q.A./Q.C. coating inspector, coating surveyor, coating supervisor, vendor surveillance, etc.

I have been working in the Construction Industry for 40 years at all levels up to Construction Manager. I have extensive experience overseas including Africa and Asia. I am looking for similar work and am prepared to work anywhere at immediate notice.

23 years experience in the Electrical Distribution/Electrical Contractor Industry. Wish to acquire a part time or full time position in an office or job site environment.

Job objective: General Supervisor, Field Supervisor, Project Manager or Assistant Project Manager. Interested in overseas opportunities.

Looking for a new challenge at the end of 2003 my present contract end then

S.M.A.W.welder/demonstretor/application engineer in a welding electrods company xperience 8 year as welder/fabricator and 2 year as application engineer and demonstretor greduate and computer littrate

Heavy Equipment Operator Grader, Excavator all sizes, front-end loader and dozer, Class A CDL with all the endorsements

3-D mapping, preparation of Face logs, monitoring & analysis the defomation

Supply Chain Management, Cost Reduction, Global Product Management, Inventory Planning, Process Development, Cost Management, Vendor Management and Relationships

Repair and maintenance of class 1-8 trucks, trailers. Repair all systems of vehicles, including power, train, air, hydraulics, electrical, brakes, and transmissions

Has more than Seventeen (17) Years of continuous experience in Cost Engineering and Quantity Surveying works which involved the following:

Instrument engineer with around 15 yrs of versatile experience in the field of installation,commissioning , operation amd maintenance.

Drafting (Manually & computerized using AutoCAD 2D & 3D), Structural Analysis & Design of Building (Manually and computerized using STAAD & Microfeap Software’s), Construction Estimates, Plumbing/Piping Design, Surveying, Project Supervision and Computer Literate (Microsoft Word,Excel & Powerpoint)

Over 25 years of diverse and successful experience in material control in areas including: Nuclear/Coal Power Generation, Bulk Handling & Storage, Co-generation, Commercial Maintenance, Oil Refinery, Warehouse/Distribution, Shutdown/Turnaround and Outages.

Experience in all phases of material management & expediting, design office & engineering & project coordination. Experience in heavy construction including offshore oil platforms & related facilities, nuclear fuelled power plants, paper mill, chemical plant & overseas military facilities.

I am a Graduate Mechanical Engineer and have good proficiency in Computers. I have put in 13 years of hard work in Construction of Oil & Gas Pipelines, which has given me exposure in all fields like Project Management, Planning, Tendering, Cost Estimation and Control, Execution.

Geodesist/Land Surveyor/Geomatics/GIS consultant

Project Manager with over 35 years of experience in the construction industry, which offers an extensive and diversified array of industries such as power generation, pharmaceutical, semiconductor, large office facilities, pulp/paper and plastic projects, coal gasification and others.

Highly motivated and results-oriented professional with exceptional leadership and interpersonal skills with an extensive background in construction industry.

A competent Chartered Mechanical Engineer with over 14 years experience, gained in Aluminium, Iron & Steel, Nuclear & Petrochemical Industries. Worked in areas of Design, Construction, Installation, Projects, Commissioning, Overhead Cranes and SAP.

Piping/Mechanical Superintendent

System Admin for IT Industry.

RESIDENT CONSTRUCTION MANAGER / SUBCONTRACTS MANAGER / CONSULTANT IN CONSTRUCTION OF PETROCHEMICAL PLANTS (SPECIFICALLY HYDROGEN /SYNGAS REFORMERS, ETHYLENE CRACKING FURNACES, PETROCHEMICAL UNITS INCLUDING DETAIL PLANNING AND EXECUTION OF SEVERAL PLANT TURNAROUNDS PROJECTS)

30 years experience in all types of heavy industry, the equipment used, predominately in coatings and linings. Experienced in all phases of construction projects. Supervised numerous larger projects, overseen and implemented safety, inspection.

I am currently on another project but can leave with a two week notice.

I have been supervising and managing Building projects for the past 20 years With great success. I am not only a man Who is a supervisor but I have journeyman Level skills at most of the major trades, This allows me to insure proper quality.

results oriented, hands on, Construction Management person with 20+ yrs experience in various facets of the industry specializing in Industrial, Mining Construction. Prefers international or remote work location.

Have been in construction for 35 years

Experienced Maintenance Mechanic/Welder with twenty-five years in the maintenance field. Skilled in all types of mechanical work- hydraulic, pneumatic, conveying systems

Award winning Project Manager / Facilities Engineer.

Extensive experience in the construction of industrial buildings, Multi-story buildings, Steel Structures, Water Structures, Infrastructures Writing Progress Reports, Maintaining and Coordinating Construction work schedules Computer skills: Office 2000, Primavera 5.1, Auto CAD

Extensive background in the planning and profitable management of large scale projects/ programs in support of multi-million dollar business operations.

ELECT. ENGGR WITH 21YRS+ CONSTRUCTION SUPERVISION EXP.PG DIP IN CONST MANGMT AND MSPROJECT PI PPM. INVOLVED IN PROJ MANAGMT CONSULTACY FOR ELECTRICL/PLNNG COORD/QUALITY ASSURANCE COORD AND HSE MANAGEMENT.

Power Generation- Twenty-eight years experience of Construction, Startup & Commissioning, Operations & Training for Combined Cycle Units, Coal Fired and Nuclear Steam Supply Systems (NSSS) & Balance of Plant (BOP) Systems as Lead Mechanical, Lead I&C, Lead Operations and Startup Plant Manager.

I am looking for a full time work, anywhere

Twenty-five years experience in the construction/consulting sector.

I have a total of 20 years in heavy construction Safety

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 [ 19 ] 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out