Resume - 30+ yrs in heavy equipment of all types, mostly friction cranes, draglines, etc.

Misco Jobs

Resume #24725

CONTACT INFORMATION:
View contact information...

EXPERIENCE
Experienced Equipment operator with both friction and hydraulic cranes up to two hundred and twenty-five tons. Piledriving, hook, clamshell and rock grapple experience from barges and ashore, hydraulic truck cranes and rough terrain. Much experience with various equipment used in projects including excavators, bulldozers. loaders, and motor graders. Have done sub-grade and some finish grade work for roadway and site prep completion for U.S. Corps. of Engineers. Land clearing, pond completion and site prep for tree planting.

ARCO Paving Inc. Presently occupied in grading and prep site work in Ft. Stewart, Ga.
TIC Inc. Savannah, Ga. 2001- 2005 Operated a 100-ton American model 7260 crane in rock placement on the Savannah River.* Operated Manitowoc crane, 4100 series in bridgework and dock construction.* Poured concrete and some pile driving at different sites. Operated clamshell on river barge.* Used motor grader to keep up hauling road for 18 wheelers hauling material to job site. * From 1991 thru 2001 I was employed in the textile industry and was not involved in any construction projects.

Florida Rock and Sand Inc. Florida City, Fl. 1989-1991 Site Prep. Supervisor* Led a crew of twelve to sixteen employees in foundation layout for a golf course at Villages of Homestead Parks. Also did layout for a professional golf and motorcycle racing course at same location.* Took over site prep layout for the baseball stadium built later.* Used laser levelers added to motor graders to increase completion time.* Operated Link-Belt 238 series in structural completion of this project.* Operated 988 Cat loading crushed material in quarry operation for this project. Weekly Asphalt and Paving Co. Pembroke Pines, Fl. 1986- 1989 Operated 28 ton Link-Belt Hydraulic crane in the demolition and widening of bridges in the Miami, Fl. Area. Also operated a Manitowoc 3900 in the building of an overpass in the Pompano Bch. Area.Anderson Construction Ft. Gaines, Ga.
1984 – 1986 Operated various machinery with this company on various projects including building additions to the Walter F. George Dam on the Chattahoochee River for the Corps. Of Engineers. Also did seawall Construction with sheet piling operating Lima, 75-ton crane. Company also had a Bucyrus –Erie and P&H that I operated in hook work and dragline excavation. During this time I also did some sand and grout auger-cast piling installation at a shutdown of Mead Coated Board in Alabama, operating a Link-Belt 118 and a P&H hydraulic for rebar placement. Worked with Louisiana Pacific under contract draining sediment

Lumpkin Mining Co. Eufaula, Al. 1968-1984Learned to operate all forms of excavation and construction equipment in the strip mining of Iron ore. Used heavy draglines and shovels, D8 bulldozers and scrapers to both strip overburden and mine raw materials. Learned hook work in building crushers and washing plants at various locations at site.

EDUCATION
Graduate Eufaula High School Eufaula, Al. 1968* 1 year at George C. Wallace Jr. college studying general academics.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2651 to 2700 of 4757)

Go to Search Parameters...

Brief Description

Where my experience, Education,training and good work habits will be an asset to your company.

Exposed in several construction company involved in Engineering Procurement Installation Commissioning and Build Operate Transfer type of Contract at Oil & Gas, Petrochemical and Power Plants. In addition to that I’ve been in the Operation and Maintenance a couple of years at the Refinery and Petroc

Plant Inspector or Quality Assurance/Control Inspector API 510/ AWS CWI

30+ yrs in heavy equipment of all types, mostly friction cranes, draglines, etc.

Senior piping designer

Twenty plus years managing large scale telecom and construction projects

Construction managemnt, contract managment, quantity surveying, planning, schduling, cost analysis and control, finance managment, resource managment, computer maintinance,

Instrument Engineer with more than 27 years of experience in execution of erection, testing & commissioning/ proposals in the field of Instrumentation Projects for Oil & Gas, Refinery, Petrochemical, Fertilizers and other Chemical & Process Industries.

BS Chemical Engr. with 15 years onshore/offshore oil/gas production engineering support, facilities planning and design, capital project development and economic evaluation, operations, process simulation/optimization, commissioning, construction and maintenance. Also trained young Saudi engineers

More than 2.5 + years of experiences in the field of Planning as a Planning Engg(BE Mechanical Engg.). Analysis of Resource requirement, Performance analysis, Progress measurement, Monitoring & Reporting of EPC deliverables and activities of Pipeline projects

Mechanical Engr: Fabrication works as Mech w/Shop manager ,drawing study,planning,procurement,supervision QA/QC ,erection.

A suitable position in the area of electrical schematic drawings and designing of electrical panel boards, cable layouts, etc. and/or designing of electronic circuit layout and PCB by using CAD software .

Mechanical Engineer

Situations that may be transformed to improve define the main objective of my professional profile, problems that demand critical analysis, evaluation of variables, and proposition of novel solution strategies to overcome them. I am much motivated, well prepared, and ready to learn more everyday.

I know I could be a good asset to your company. I have 9 years of experience working in commercial, industrial. I have skills in various fields such as electronics, PLC work, carpentry, masonary, concrete work, mechanics, welding, and fabrication.

B.Tech/MBA,Total 5 + years experience in Mechanical & Construction Sectors. Working as CONTRACTS ENGINEER (Planning/Estimate/Proposal/Qty’ Surveyor) in M/s CAPE EAST LIMITED CO (W.L.L), DOHA, QATAR.

Experice engineer with project engineering and project managemnt

Maintenance Manager with BSEE degree & current MSHA electrical cards with extensive hands-on experience in all aspects of mechanical, electrical, and hydraulic systems.

working in Ras gas - qatar as an instrument technician with 14 years experience. good knowledge in process instrumentation. good experience in yokagawa CS3000 and Foxboro I/A series Dcs. having diploma in electronics and telecommunication. pls see attached resumes for more details.

Electrician who posseses a wide variety of electrical knowledge

19 years of International Project Management experience, excellent communication skills at all levels. Highly organized dedicated and reliable employee, thrives under pressure. Very good computer skills, user of Microsoft Office and various accounting software SAGE, JDE, Tally & Enterprise

Work in construction warehouse , Construction on construction site , Forklift and other heawy machine operator , Supervising of building site , Control and checking construction material ( strickt and sawing construction material spendind ) etc.

Mechanical Engineer Rotating Equipment, Pumps, compresssors, gas turbines, and diesel engines, Oil & Gas, LNG, Projects

Transmission Engineer- power system circuit and substation design & planning

Masters in Business Administration (with specialization in Finance and Human resources) Hyderabad, A.P, India.

Mechanical Engineer, with 14 years exp, expertise in construction, marines structures, fabrication of offshore, marine structures and ship repairs, quantity surveying, planning and scheduling, cost estmating

Interdisciplinary exposure to sciences and arts: Engineering-Business-IT-environmental (which is a very rare profile). Highly developed set of skills: Coordination skills, Pedagogic skills, and Critical evaluation skills

Instrumentation & Control Engineer with over 14 year experience in Basic & Detailed Engineering, Supervision, Commissioning of off shore / on shore fields. Profitional in Field Instrument, DCS, Automation, HV/LV Elect Switchgears.

Post graduate Engineer with experience in marketing, engineering, insurance survey.

Can estimate cost for any construction project

Boilermaker/welder, nonslewing crane ticket, dogman, side loading crane ticket, cert2 in fire and rescue, cert3 in mines rescue.

P.E. Electrical with 20+ vears, Specilize in power distribution and electrical maintenance for mining and heavy industrial equipment

Over 35 years experience in operating heavy equiptment. Can operate expertly all sizes Dozers, Loaders, Pans.excavators on Cats pc235 - pc3855B, Komtasos, pc 400 - pc12507, Hitachi, pc450- Ex1900, Hyundai pc360-R500 , loaders110 Trojan to WA 600 w/ a 20 ton lift, Willing to travel abroad.

APPLY FOR THE POST OF QA /QC API 510 PRESSURE VESSEL INSPECTOR – CSWIP 3.1 WELDING INSPECTOR, BGAS-CSWIP PAINTING INSPECTOR, NDT, DOCUMENTATION

I am an Oil & Gas Facilities Project Engineer (B.Sc. in Mechanical Engineering, 1980) My duties are to develop, supervise, and execute design, procurement and construction of engineered hydrocarbon projects.

Soil investigation and plinning work

Testing & comissioning of control panels with good knowledge of design.

Have good working knowledge of AutoCad 2002, AutoCad 2004, Adobe PhotoShop, CorelDraw, Microsoft Excel, Microsoft Word, 3D Max Studio, A.D.T., Micro Station and Internet.

I want to work as a project engineer and/or site engineer

Three and half year experience in CADD software like Unigraphics, AutoCAD 2000 for 3D modeling, Composite Design, Assembling and detail drafting.Knowledge in fundamentals of Computer Graphics under Unigraphics for Helicopter components, assembly, subassembly, part drawings etc.

12 yrs. of underground mining, Electrician, All around maintance Man, Heavy Equipment Operator, Gas & Diesel Mechanic, Small Engine Repair, Carpenter, Mason. Plumbling.

10 years drafting experience for AT&T, and Verizon, Read and interpret construction notes and drawings. I strive for excellence in everything I do.

14 years experience with Brown & Root, Halliburton, KBR in the cost engineering, payroll, SAP implementation, HR, also have 2 years experience in cost engineering with Subsea 7 (offshore marine company) and 2 years experience with Spectra Energy (onshore gas transmission) as material cost eng

Experienced Cad Operator in Architectual, Civil, & Telecomunications

I am a post graduate in Production engineering with over 18 years of experience in heavy earth moving equipment and auto vehicles

Electrical Project Planning Engineer (Primavera P3 & P6) with MBA Degree

Project, Project manager, maintenance, maintenance manager, production, production manager, mining, heavy equipment

Controls Engineer, ControlLogix, Manufacturing Engineer, Engineering Manager, PLC Programming, Robotics, Machine Vision

Fleet Manager/Safety Officer 15 years experience. Certified Journeyman Heavy Duty Repairmen/Welder 22 years experience.

Mechanical design Post Graduate with 9 Years of experience in process industry and design of tank, vessels, EPC packages, other static and rotating equipments like pumps, compressors, turbines, agitators, etc.

First Prev 51 52 53 [ 54 ] 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out