Resume - Mechanical engineer with design and project engineering experience. Proficient D...

Misco Jobs

Resume #2526

CONTACT INFORMATION:
View contact information...

1988-2003     BVR & ASSOCIATES, Salt Lake City, UT.
Designer / Engineer
Under contract to Ogden Iron Works, helping that company in the development of a new beet piler. My design responsible was for the main frame, the main hopper and the screen system.
Under contract to Peterson Specialized Fabricators, helping that company in their assessment of weather they could support Hercules and Morton Thiokol in their endeavors on developing a new transport system for the Titan IV missile.
Under contract to Beehive Machinery Inc., helping that company in the development of a new pump for the food industry.
Under contract to Arrow Dynamics, helping that company in the development of a structural support system for an amusement park ride called shoot the chute.
Under contract to Fluor Daniels, helping them in the design of a new electrowinning building and overhead crane system.
Under contract to Kennecott Copper, helping in the retro fitting of their old smelter and as an inspector for their new smelter.
Under contract to Roberts & Schaefer, helping that company in the Geneva Steel upgrade project. Areas in which I was involved were the plate mill, down coiler, plate shear line, broadside mill and the roll line.
Under contract to Thomas Engineering, helping that company in their part of building Utah’s North / South Light Rail system. Part of my duty was to inspect the quality of work performed i.e. foundation walls, footings, curb & gutter and ashphalt.
Under contract to Cambelt International, helping that company in the design of conveyor tables, handrails, tail frame, guards, hold down pulley, inlet hopper discharge chute and skirtboard. Made layout drawings and assembly drawings.

1983-1988     CIRCUIT SERVICES / W.R. HATCH, Eden Prairie, MN.
Project Engineer
Supervised a nine man drafting department and oversaw all projects worked on. Acted as project manager for equipment valued at approximately $60,000. I was also responsible for installation drawings, purchase orders and special equipment requested by the customer. My duties also included project layout and design, engineering and drafting as required.
Responsible for the implementation of M.R.P. system and AutoCAD programs. Actively involved in Circuit Services R&D program, which involved tooling design, electronic and pneumatic design, and the design of a new conveyor drive systems for the circuit board industry.

1982 1983    THE AMMERMAN COMPANY, Stillwater, MN
Designer
Assigned responsibility for developing new products for commercial construction as it pertained to industrial ventilation systems.

1976 1982     BARRY BLOWER COMPANY, Minneapolis, MN
Layout Drafter
Generated customer approval drawings, shop drawings and fan curves.

1975 1976     APPLIED AIR SYSTEMS, St. Paul, MN
Drafter
Generated piping and customer approval drawings.

EDUCATION & ADDITIONAL TRAINING

Master’s Degree in Mechanical Engineering, 2002
CONCORDIA COLLEGE – ST. JOHN, V I

Computer Skills:
AutoCAD 2002, Microsoft Office Suite applications, Windows NT platform, DeLorme 2000, HP ME10, Rebis

Inspection of underground utility systems: including storm drain, sanitary sewer, potable water, pressurized irrigation, natural gas, cable television, electrical service and distribution, and telephone.
Inspection of asphalt pavements including site grading, base coarse materials, drainage and workmanship.
Inspection of concrete structures including footings, equipment foundations, retaining walls, curb and gutter, slabs-on-grade.
Determination of measurement and payment quantities for approval/verification of contractor request for payment and preparation/job site review and preparation of project AS-BUILT drawings.
Surveying experience includes topographic, horizontal and/or vertical control survey and construction staking.
Prepared probable construction cost estimates for civil, structural and mechanical type projects.
Review of contractor’s Request For Payment and confirmation of quantities completed.
Review, analysis and documentation of Contractor Change Order cost proposals.
Review, analysis and documentation of contractor Request For Information (RFI).
Organize and conduct project coordination meetings with contractor.
Review, analysis and distribution of contractor production/man power schedules.
Coordinate and observe project material testing.
Coordinate and observe project system testing for HVAC, mechanical equipment, mechanical piping, and plumbing.
Liaison between client, design team and contractors.
Periodic review of contractor redlines.
Coordination of construction staking/verification of contractors base of control.
Periodic review of material testing reports.
Review of equipment/system testing/acceptance reports.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 301 to 350 of 4757)

Go to Search Parameters...

Brief Description

I am having vast experience (22 Years) in Maintenance & Projects and in diverse fields. I am suitably qualified (BE, ME, PGDM, PGDIT) to take up any challenging assignments across the globe.

Civil Engineer. Management in RCM Reliability centred Maintenance.

Electrical engineer - building electrical design and rapid transit systems; proposals and specifications; CAD.

Senior mechanical engineer with experience in engineering for material handling, industrial installations and conveying machines in steel industry, mining, cement & chemicals. Start-up assistance for steel industry.

Close supervision of projects handle and monitoring

I have masters in Water Resources Management followed by Bachelor of Engineering. Skills in Construction management,people management,sub conatractor mangment,quality control,health and safety

A result oriented and self-motivated M.Tech Civil Engineering Professional with over 18 years of rich & qualitative experience in Project Management, Civil Engineering and Construction Management of infrastructure projects including Airport Terminals, Buildings Roads and Flyovers.

Engineer Graduate with 09 years experience in Automotive Field as Sales ,Warranty, Technical Engineer

Over 25 years in the construction industry

HEALTH, SAFETY & ENVIRONMENT SPECIALIST WITH 20+ YEARS OF EXPERIENCE

Senior structural engineer with 15 years experience. National Diploma (Civil Engineering)Bachelor of Technology (Structural)

Auto Electrical / Mechanical/ heavy vehicles, Cat, Deutz, Comatsu, Man, M/Benz, Feul rail engines, Airconditioning, Hydraulics, Electrical repair on all types of vehicles, Mining vehicles.

B.Sc.1977, V.G. Honours, M.Sc.1985. Consultant and Executive Director (> 40 Transport & Railway projects). Teach Transport Planning, Railway Eng. & Applied Statistics & Eng. Systems for undergraduate, Faculty of Eng., Cairo Uni. DOS, Win., AutoCad, MSOffice. Organizing the 3rd CODATU-III Conference

APPLIACATION FOR THE POST OF JUNIOR CIVIL ENGINEER.

I am a creative civil engineer and construction inspector, with diverse multi disciplinary experience in reinforced concrete, pre-stressed concrete, precast concrete, structural steel and timber construction. I am well versed with all aspects of project management from inception to completion.

Project Manager: Responsible of the coordination and execution of the following projects: • Warehouse Management System (Oracle WMS) • Overall Revision to the actual ACP Master Catalog . Inventory Re-engineering Program

Welding(certificates). Electrical, mechanical, hydraulic and pneumatic equipment, installation, (30MPa certificate). Workplace Safety & Health field (Certificates). Staff training and retraining. Drawing and reading blueprints and schematics. Robotics. Repair. Maintenance. Management. Sales.

A specialist in rock mechanics and engineering geology. 26 years tunnelling and mining experience. Expertise in stability analysis, support design and monitoring; blast design and optimisation; TBM and road header performance; risk analysis.

25 YEARS OF MANAGING & BUILDING A/E PROJECTS EXCEEDING $ 600 MILLION BS & MS - CONSTRUCTION MANAGEMENT - MINOR IN CIVIL ENGINEERING - 4:00GPA FORMAL EDUCATION IN ARCHITECTURE -QUALIFIED WITH A.R.E IN THREE STATES

I am an experienced AutoCAD operator / draftsman with expertise on mechanical, structural, civil and electrical drawings, using Autocad 2009. I have eleven years of extensive hands-on work experience in a manufacturing as well as construction set-up.

I have vast experience in the Safety related field.

Installation of electrical pipe,electrical wiring,electrical controls,electrical panel board.Installation of main over current protection,lightings,switches.Banking of transformers and splcing of wires.Installation of A.C. electric motors,magnetic contactor.Installation AHU,ACU,FCU,colling tower

 Project Management; Demand Forecasting; Simulation & Analysis Packages/Models

I am a professional Mechanical Engineer with 20 years Gulf experience with MEP services in building construction..

PROFILE:A Piping/mechanical superintendent with 13 years experience in the petrochemical & construction industries in Middle East. Proven leadership skills involving managing, developing and motivating teams to achieve their objectives. First-class analytical, design and problem solving skills. Good

Welding Technologies, Technical assistance, Workshop, site, AutoCAD, Tekla Structures, XSteel, SolidWorks, MS Project

Looking for a long term contract or permanent challenging position worldwide, utilizing broad - based experience in projects maintenance– Maintenance manager, Supervisor, Team leader – Air Traffic Control, Industrial projects, Telecommunications.

CM Support of (3) State and Federally funded highway projects (2) Govt./Military Construction Projects; (1) Hi-Tech Facil. Control Upgrade; (3) Hospital Projects. (2) New civil underground water, gas, sewer and (3) major telecommunications infrastructure proj (2) Environmental – Remediation projects

Senior Hydrogeologist

Formal studies in civil engineering, information systems, business management and project management have provided me with extensive technical and financial expertise together with proven planning, coordination and control skills.

Twenty-five years in quality management including operations management, budget and manpower planning, supervision, project execution, quality system implementation, auditing, coordination and training during design, procurement and construction of international energy and petrochemical projects.

Senior Mechanical Engineer (M.Sc.) having experience as plant manager and project manager, specialist in mining, safety glass, manufacturing plant and brewery investments.

Mechanical engineer with design and project engineering experience. Proficient Designer with over 10,000 hours total CAD experience including Autocad 2002, and some Microstation. Extensive experience in mechanical systems design, product design, as-builts, and fieldwork.

I have over 15 years of experience in construction management. I have expertise in contract negotiations, budgets, multi-tasking, leading teams of employees, EPA and OSHA, and many other areas.

Commercial Real Estate Agent, Construction Project Manager, Business Development Director

My education qualifications, career training, knowledge and acquired skills would be suited to position in your company (Former Soviet Union: Kazakhstan, Russia).

Qualified & Experienced Design Engineer Looking for New Challenge.

A reliable, enthusiastic and confident candidate with post graduate qualification of Project Management and experience with various property development projects in Vietnam.

Iam expert with health and safety practices

Electrical/electronic engineer. Autocad design engineer.

More than 25 years experience in the Project and Detailed Designs and Management of Water & Wastewater Treatment Systems, Pumping Stations and Sewerage Reticulation Systems

A Chartered member of Institution of Engineers (India), Project Management credential holder from PMI, USA and Post Graduate in Civil Engineering with specialization in Soil Mechanics and Foundation Engineering with over 21 years of professional experience in infrastructure projects including constr

Project Manager 20 yrs experience Oil/Gas from Ground Up. Objective supported by: INTERNATIONAL PM MBA Ceng INSTRUMENTATION AND CONTROL HNC PROCESS CONTROL CONSTRUCTION SUPERVISION COMMISSIONING / AUDITING FISCAL MEASUREMENT SYSTEMS ENGLISH / SPANISH

Master in Construction Management. Hands-on experience in the field and in the office in the three basic specialties: civil, electric and mechanical. Computer skills with: Expedition and Primavera /Suretrack, Windows, Excel, Lotus etc.. Prepare the WBS, OBS, budget control etc..

Throughout my Professional Career and experiences being a GC, one of my duties was Estimating, which I did learned and had to do from ground Up, on most of the Projects I did Participated in, from simple Electrical Ductworks up to Special Warehouses at Industrial Division.

I have been employed in the field of Power Engineering, Industrial Installations, Cement Industry and Sewage Treatment Plants at all stages, covering turnkey projects: erection, starting - up, commissioning, running and all kinds of maintenance.

A highly skilled industrial project construction & facility equipment installation management professional who has worked on projects from "cradle to grave" for various major companies. Over 15 years project management experience.

Twenty five years domestic and international experience in Prime Contracts and Subcontracts Management & Administration and Pricing involving all aspects of the procurement cycle.

Senior Engineer / Traffic Management I am confident that my experience would allow me to make an immediate and significant contribution. I am attaching a brief overview of my work history and accomplishments for your review.

Instrument supervisor

First 1 2 3 4 5 6 [ 7 ] 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out