Resume - Chief Engineer (Manager) in Technical Office for a large construction progect :H...

Misco Jobs

Resume #26149

CONTACT INFORMATION:
View contact information...

Designation: Technical Office Manager of construction project

EDUCATION
May 1989 Complete the preliminary year towards the M.Sc. Degree in Structural Engineering, Cairo University.
June 1987 Bachelor of Science in Civil Engineering.
Cairo University, Giza, Egypt.
Grade: Very Good with Honor Degree (80.7%).
Grade Point Average (Major) - 3.2 / 4.
Grade Point Average (Cumulative) - 3.0 / 4.
Graduation Project: Concrete Design with a V.Good rate of Appreciation.

WORK EXPERIENCE

SAUDI BENLADEN GROUP,
Rush Projects Department- Cairo
Oct. 2004 - Up to date
Chief Engineer in Technical Office for the project of Development Of King Abdul Aziz Endowment For Mecca Holy Haram Project. The project with an Estimated Value of 1.5 billion $ and Considered as the Highest Concrete Residential and Commercial Complex in the world. It has 1,400,000 m2 Gross Built Area with a Total Height of 477 m from Ground Level. It is Consists Podium with 16 levels with area of 35,000 m2/ level and 7 Towers above Podium with 560,000 m2 Floor Area. Also there is the A/C Plant building for the complex and for the future extension of Haram. The Consultant is Dar Al-Handassah.
Responsible to follow up, check and review work for three teams (5 Engineers each) for two Towers and the A/C Plant building. The main job responsibilities are as the following:
- Preparing and checking structural shop drawings with B.B.S.
- Reviewing and coordination for other shop drawing aspects (Electromechanical & Architecture shop dwgs).
- Preparing proposals and RFI's to facilitate construction.
- Planning for submittals of shop drawings, taking into account site priorities.
- Follow up for shop drawings production rates, and provide solutions to improve quality.

KUWAITY TECH CONSULTANTS - KUWAIT
July 2003 - Oct. 2003
Senior structural design Engineer Participated in the design and following projects according to ACI code:
- Al-Zour Power Generation Station - Al-Zour-Kuwait
Structural detailed design for buildings and shop drawings for all buildings
- General Health Building - Kuwait

ASCON /ETA - NABCONTRACT - ECTTP J.V. - CAIRO
July 2002 - May 2003
A Technical Office Manager for Construction project of Tunnel under Cairo Ring Road at ElKattamia (25 million L.E). The project was made to serve the Maadi City center Commercial Mall and Carfour Hyper Market the project consist of the following:
- Construction of tunnel of R.C walls and foundations and steel beams roof girders with R.C slab Decking with open cut method having temporary detour for traffic diversion of ring road.
- Permanent Utilities diversion for 400 mm D.I water pipe with valve rooms, also 600mm sewage pipe with manhole with depth of 12 m under road both are crossing under road through R.C sleeve of 1700mm pipe also electrical cables were diverted using thrust boring.
- Construction of Roads for mall and its approaches having electrical illumination, storm water drainage, side walks and Embankment tiling, signage and road marking and also all necessary landscaping items.
Responsible for the following:
- Reviewing and preparing of the shop drawings for different Aspects of items.
- Following up of the time schedule, making daily and weekly report for works to the consultant.
- Making submittal for materials and documents to get consultant Approval.
- Preparing and updating for Quality and Environmental plan, Quality Assurance, Quality Control, and Health & Safety Manuals for ISO 9000 - 2000 certificate.
- Preparing subcontractors Contracts and Invoices.
- Preparing of Claims and variation orders study.
- Preparing monthly valuation for the executed works.

SIGMA for Engineering and Construction - CAIRO
Aug. 1995 - June 2002
A Projects Manager of contracting company specialized in supplying and installing of sewage or water main pipe networks, giving the technical support for the projects construction, planning for site, follow up of Execution and studying tenders.

CAMPENON BERNARD - SGE - CAIRO
Nov. 1993 - June 1995
Senior Technical Engineer for the project: GREATER CAIRO METRO LINE 2 - Joint Venture for Civil Works (JVCW) - Design Department, Making full reinforcement calculations preparing and Reviewing of Shop drawings and B.B.S, and follow up for Execution for the following main structures:
- Under Ground Stations of ELKHALAFAWI and ST. THERESA (21.0 width x 155.0m Long x 22.0m depth),
- Annexed Structures (utility under ground shafts along the Tunnel varying from 4.0-5.0m in width and from 10.0 - 22.0m in length and 22.0 - 30.0m in depth).
- Connection Structures between Annexed Structures and Tunnel, taking effect of sequence of construction and earth pressure loads, Uplift loads and tunnel forces due to removing of tunnel segments.

ARAB CONSULTING ENGINEERS - CAIRO
(MOHARRAM - BAKHOUM)
July 1989- Oct. 1993
Structural Design Engineer participated in the design for the following projects:
- Homoud Tower in Kuwait:
- Extension of the Arab Consulting Engineers Headquarters, Dokki, Cairo:
Analyses and design of paneled frames in space under vertical, wind, seismic (UBC zone 2B), and temperature loads were made. Frames consist of five stories flying over the existing five-story structure. Frames supported on micro-piles foundations.
- Extension of King Abd El Aziz University, Jeddah.
- Safir Hotel extension, Giza.
- Greater Cairo Metro Line No. (2) - Basic design stage:
Joint Venture SOFRETU-EHAF-ACE, Analysis and design of different elements for the under ground stations (Rod ElFarag, Masarra, and Al Awkaf stations).
- Omar Afandi Multi-Story stores at Nasr City, Assiut and Quesna.
- Tourist Village on the North West Coast of Egypt (Reviera):
- Egyptian German Telecommunication Industry (E.G.T.I.) in 6th of October City.
- Beni Suef Cement Project:
Reviewing and checking of calculations and reinforcement work shop details of contractor KOBI STEEL Ltd, Japan, according to DIN code.
- El Shaheed Abdel Moneim Riad Tunnel at Alexandria:
Complete analysis and design of Skew Prestressed Concrete Roof Slab was made. Finite Elements analysis using shell element, and approximate grillage analysis was used, to discuss the distribution of moments due to transverse loads and due to prestressing forces, also the distribution of the In-plane forces, during phases of construction. This slab type is considered as the first of its kind in the country with 27.0 m edge span and 0.9m in thickness.

SPECIAL SKILLS
Computer skills:
- Excellent knowledge in using SAP2000, and Windows, Excel, Word and AUTOCAD.
- Made some programs to design and check of sections according to various codes with BASIC and FORTRAN computer languages.
Languages
- Arabic (Mother-tongue). - English (Fluent).

REFERENCES Furnished upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1801 to 1850 of 4814)

Go to Search Parameters...

Brief Description

Experienced in autocad ,microstation and manual drafting. 32 years in civil and structural design

Instrumentation technician with 3 years working experience in Wiring installations, Installation/hooking - up of instruments such as Transmitters, Pressure gauge, Thermocouples, valve controller I/P etc.. , Install additional Lighting. Modifying Control Panels, PLC Programming (Pr

Mining Shaft Supervisor, Equipment Operator, Maintenance Supervisor

I have extensive experience in maintenance fitting , in mining and industrial fields

PIPING DESIGNER/DRAFTSMAN(PDS/PELICONFORGE/SPR/CAD/MICRSTATION)

MSc of Engineering Science, East Ukrainian University – Ukraine (1998),  BSc Instrument & Control Engineering, East Ukrainian University – Ukraine (1997)

MA(ECONOMICS), PGDCA, HEALTH & SAFETY MANAGEMENT DIPLOMA, FIRE AND SAFETY MANAGEMENT DIPLOMA, FIRST AID DIPLOMA, CONSTRUCTION SAFETY CERTIFICATE, COSHH CERTIFICATE, SAFETY MANAGEMENT CERTIFICATE, OHSAS-18001-1999 HEALTH AND SAFETY INTERNAL AUDIT, ENVIRONMENT AWARENESS CERTIFICATE, MANUAL HANDLING CE

Chemical Engineer with 6 years experience in Drilling, Pipeline Operation, Construction, Economic Modelling, Health, Safety and Environment, together with Sustainable Development and Issues Management. 6 languages and American Citizenship, would like to work in Houston, Texas.

Search for job in car or food industry.

same as resume one

15 years experience in implementation & maintenance of ISO 9000 QMS, Internal Audits, preparing QA/QC procedures, Quality control in construction of Tunnel, sewer/storm water pumping & lift stations, drain & sewer pipelines, Cross regulators/falls, siphons, bridges.

Searching for a position within the Construction & Civil/Structural Engineering profession, in a progressive employer that provides career growth and excellent advancement opportunities.

I’m a Computer Aided Drafter/Designer with 15 yrs experience in various fields. I use AutoCAD up to version 2002, IDEAs SDRC v. 7-9. I’ve worked some with MicroStation and AutoDesk Inventor. I am looking to relocate to Virginia or Pennsylvania Reading area.

I want to relocate to USA/UK/CAnada,hence need an employer who can hire me and sponsor me for visa.

10+ years of project management experience in the areas of accounting and financial reporting in various industries, including Management Consulting, Retail and Wholesale, Manufacturing and Distribution, Mining and Construction

I have a total of nearly 13 years experience drafting, with about 9 of those years in the home building business. I also have 5 years in Coil Production (AC, Steam, Condenser, & Air Handlers) I have developed custom designs for previous companies specifically tailored to the customers needs. I have

I have diploma in Surveying and 4 years exp in High rising Bulidings. I can operate all kind of Survey instruments

Diploma in production engg.and nace level-1 & 2 are comleted

Former GS 15, U.S. Government Contract Officer (KO) & Administrative Contract Officer (ACO)¡Xcurrent Senior Level Professional seeking a Project/Program Management and or Business Development opportunity

Mechanical Engineer - 20+ years maintenance experience in mining - both Underground & O/Cut. Also Processing Plant maintenance & Project Management on new Greenfields plants.

Piping detail, scheduling, field work and design in refineries, chem plants offshore prouction platforms, onshore and offshore oil drilling rigs sugar mills using acad,( short term cadworx,rebis, smartplant) and on the board

CERTIFIED IN HEAVY EQUIPMENT OPERATION, EXPERIENCED LABOR WORKER, KNOWLEDGE OF SAFETY AND TRAINED IN MSHAW, CPR CERTIFIED,CUSTOMER SERVICE SKILLS, ETC.

Implementing the health and safety plan. Daily Tool-Box talks prior to commencement of work. Inductions of new staff members on site. Ensuring that every team member wears PPE equipment and that it is worn correctly. Specified to each projects’ requirements.

LAND SURVEYOR

Seventeen years experience in electrical engineering design, construction supervision, commissioning & start-up for major international EPC and Consulting firms specialized in power generation, T & D grids, oil and gas petrochemical fields

Project Controller with extensive experience of implementation and operation of project management systems. Detailed knowledge of C/SCSC & EVM systems. Experience in Petro-Chem, Oil & Gas downstream distribution, Rail, Defence and Civil Engineering sectors. Extensive procurement experience.

Summary of Qualifications,Combined experience in Industrial Refrigeration Technician / Electrician Technician in the Pharmaceutical Industry,Petro chemistry, Building Management System (BMS), Ship Systems, Maintenance and Troubleshooting.

Design engineer

25+ yrs progressive exp. as a Sr. Supervisory Planning/Scheduling & Project Control Engr/Mngr with Risk/Contracts Exp, Int'l w/Utilities, EPC Firms/Consultants, Turnkey OEMs and Constructors within the Energy Sector. P3 Ver.3.1, Primavera P3e/cVer.5, 6.2,Pertmaster, Claim Digger, MS Office, Acrobat

Fifty Years Total Experience in process engineering and technology development. Including More Than Twenty Years Process Engineering Experience on petroleum refinery, oil & gas production and petrochemical projects. Experience includes process simulation software Hysys/Pro II/Dynsim/Aspen.

D10 dozer, 637 push-poll scraper, Loaders, Crusher, Track-hoe, Blade, ect. Maintain equipment, water lines, sewer lines, house pads, Road construction, Airport construction, GPS. ect...

The majority of my 15 years of experience has been applied to inspecting in-service pressure equipment and piping in a refinery setting. I am an excellent communicator with exceptional organizational skills geared toward inspection, NDE planning and crew leadership.

Chief Engineer (Manager) in Technical Office for a large construction progect :High Rise building, Under ground Metro line, Industrial projects, Preparing and checking structural shop drawings with B.B.S., Coordination, Methods for constructions, using ISO 9000 - 2000 Prep. of Claims and V.O etc.

Senior Planning Engineer well versed with Primavera, Suretrack, MS Project

Technical office Manager.

Urban Roads and Highway design, Traffic and Transportation planning

Contract Negotiations, Quantity Surveying, Project Handling & Project Implementation, Project Co-ordination

Civil Engineer from REC Kurukshetra, India. Working as Assistant Manager (Civil) with Larsen & Toubro Limited - ECC Division

multi skilled engineer

To offer services as Senior piping designer for onshore and off shore oil and gas projects by using PDMS & PDS 3d model system

Fourteen years of experience in Office Administration, Procurement, HRD, Public Relation and Sales Coordination has energized me to seek suitable position in renowned companies. My quest is to further broaden my horizons so as to facilitate better opportunities to serve &better objective to achieve

Responsible for business development of company & for recruitment of professionals like Project Managers, Engineers, &Technicians for Engineering, & Construction industry in India, Middle East, ,etc.To develop and manage our own portfolio of clients and source the most suitable candidates .

International Weldig Engineer (IWE) , CSWIP 3.1 and Level II(two) Pt,Mt,Ut and RT

Degreed in occupational safety and health, 18 years experience in construction safety, sveral yrs. Overseas exp. Working with multi-national staff. Excellent medical background

Proficient in AutoCAD with 3D applications, Basic knowledge in Microsoft Word, Excel, IntelliCAD.

Experienced Industrial Structural Engineer - concrete, steel - 20+ years, UK & US codes

Metreculation, pree degree, diploma in fire and safety and OASHA

Fresh graduate QS looking for job

I have 25.5 years experience as a professional fitter/welder with 4 years as a certified welding inspector performing visual inspection of welds on pressure vessels, piping, storage tanks and structural components.

7 YEARS OF RIGGER EXPERIENCE

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 [ 37 ] 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out