Resume - Self-motivated young competent Mechanical Engineer with nine years experience wi...

Misco Jobs

Resume #26939

CONTACT INFORMATION:
View contact information...

OBJECTIVE
To get a challenging, full-time senior level position in a dynamic organization, in the Mechanical industry, utilizing my ability to work as team member and contribute to support. Where I can effectively put to use my qualifications, experience and skills.

PROFESSIONAL EXPERIENCE (nine Years)
Senior Engineer- Since February 2004 to till date
Punj Lloyd Limited.

Project working on: MP Gas compressor for offshore facilities, Kalimantan timur, Indonesia.
Pt. Punj lloyd Indonesia/Mp Gas Compression Facility for Total E & P Indonesie at Senipah, East Kalimantan, Indonesia/ Piping Engineer Manage the fabrication, erection and pre-commissioning of complete piping activity in the project.

Mechanical Executive – From August 2000 to January 2004
Larsen & Toubro Limited Gr. II Project.

Project working for: SBAF Project, BPCL, Mumbai (Cap. 2 x 70 TPD)
Working as a Lead Piping Engineer for Sulpher Recovery Unit (Refinery modernization project) in BPCL Refinery, Mumbai. The job is including total Piping & Mechanical works for SRU/ARU/SWS I & II & FGTU. Plant for SRU.

Project working for: SDU Project, IOCL (AOD) Digboi (Cap. 0.33 MMTPA)
Working for Solvent De-Waxing Unit Project Site at IOCL Digboi as a lead engineer piping execution to expedite the piping execution, which was on the critical path in view of the time and site constraints. Digboi was a tough site
Where Construction was first time being directly supervised by Gr. II Projects and also because of its geographical constraints.
Spearheaded piping execution, with a team of only 4 piping engineers including myself, to get back the control over the piping erection and mechanical completion and hydro testing. I was involved in day-to-day monitoring and planning of hydro test loops and also liquidation of technical audit and other checklists in close coordination with client and PMC.
Assisted the process engineer in setting up of the procedure for the piping and equipment clearances for pre commissioning. Also assisted process team for various checklist liquidation and speeding up of flushing and boxing up activities.

Mechanical Engineer – From April 2000 to July 2000
Mukand Engineers Limited

Project working for: LPG Recovery Project
Working for LPG Recovery Project Site at LPG Recovery Project in GAIL Gandhar (Gujarat). The job is including total Piping & Mechanical works for Regeneration gas Heater for LPG I was involved in Fabrication, Erection & Alignment of Radiant shell, Convection section, Arch plate, End tube sheet, Stack cone & Coils.

Piping Engineer – From July 1998 to March 2000.
Larsen & Toubro Limited Gr II Projects

Project Working for: Hydrogen Unit (Cap. 25000 NM3/Hr.)
Working for Hydrogen Unit Project Site at IOCL Baroda as a engineer Piping execution to expedite the piping execution, I was Involved in Following activities v Execution & monitoring works in Piping v Involvement of 100,000-Inch dia welding and 15,000-Inch Meter U/G Under ground systems up to 16" (with the following of Wrapping Coating),
Erection of Pigtail tube & catalyst tube.
- Pre–fabrication and Erection of Piping in Process, Utilities & Fire fighting.
Following & studying of GAD's, Isometrics & P & ID's in the process Area.
Mechanical Completion of Works Inspected by EIL Standards.
- Involvement of Painting, Insulation & Hydrotesting of Piping Loops as per EIL Standards v Pre-commissioning Activities of Flushing of Piping Systems & Charging of Utilities.
- Reconciliation of Piping Material including field Measurement of works
Handing over of Spare & Surplus Material and Correlation with client.

ASST. ENGINEER – From July 1996 to April 1998.
Apex Electicals Limited (Baroda)

Working For: Shop Fabrication
Working as a Asst. Engineer with M/s Apex Electricals Limited. (ISO 9000 organization) in Baroda (Gujarat). The job is including total Fabrication of Transformer Tanks & Vacuum test of Tanks.

IMPORTANT JOB HANDLED
- Piping Pre fabrication, erection, testing & Pre-Commissioning of Hydrogen Unit for IOCL Baroda v Fabrication & Erection of Regeneration of Gas Heater for GAIL Gandhar.
- Piping Pre fabrication, erection, testing & Pre-Commissioning of Solvent De-waxing Unit for IOCL (AOD) Digboi.

Responsibilities held in construction and contracting firm.
Execution of projects right from conception stage till handing over in a professional and systematic manner.

- Invoicing/contractor invoice clearing.
- We shall also prepare erection procedures for submission/approval to Customer and for implementations by sub-contractors for important activities v The entire plant may be split into sub-systems. He shall intimate to the Customer as and when the sub-systems are mechanically completed for his punch listing and arrange for liquidation of the same.
- On completion of the pre-commissioning, We shall intimate to the Customer about his readiness for commissioning of the plant and obtain Mechanical Completion Certificates as per the conditions of the Contract.

- Coordinating the construction activities and Progress Monitoring by day-to-day interaction with Customer/ Consultant, Engineering Office and Construction Sub-Contractors.
- Finalization of Milestones in Construction Billing Schedule for LSTK Projects and Invoicing based on the same.

OTHER FIELD EXPIRIENCE
- Fully supervised the Installation of Catalyst tube & Hair Pin tube Supporting Grids of Naphtha Reformer, As part of Hydrogen Unit in IOCL Baroda.
- Preparation of QAP, Job procedures and Inspection test plans as per specification and Bid requirements and documentation accordingly.
- Familiar with WPS & PQR
- Involved in the Pre commissioning activities of Solvent De-waxing Unit of IOCL Digboi Refinery & Hydrogen unit of IOCL Baroda Refinery v Familiar with Codes like ASME SEC IX, ASME SEC II, ANSI B 31.3, API 650 and EIL Specifications regarding Piping, Welding, Material, Surface preparation & Painting, Hot & Cold Insulation, Jacketed Piping, Steam tracing, Storage Tank Fabrication, etc

FINAL DOCUMENTATION
Marking of site changes in drawings, documents and sending the markup to Engineering for as built document, Marking up includes layout drawing.

OTHER SKILLS
Possess sound knowledge of computer. Working knowledge of Excel, AutoCAD-2000 and other related day-today office Software Programs. Worked with Windows 98, Office 2000.

EDUCATIONAL QUALIFICATION
Diploma in Mechanical Engineering

Professional Qualification
Training in AutoCAD 2000 from Unique CAD Centre
Safety Training for Lifting workshop level 3

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2751 to 2800 of 4805)

Go to Search Parameters...

Brief Description

Maintenance Manager with BSEE degree & current MSHA electrical cards with hands-on experience in all aspects of mechanical, electrical, and hydraulic systems.

to obtaian a job

I've been working in the diesel business for over 10 years. I do everything from general maintenance to major rebuilds. From office type work to operating equipment when need be.

27 years experience primarily in oil & gas EPC/EPCM Project controls, Contracts, project management and engineering.

16 years exp. in Design/Drafting, Softwares AutoCad 2004, Microstation J/V8, IRASB, AutoCad Overlay, HVAC system layouts Duct layouts, Equip,Layouts, Utility/Fire prot.sys layouts,Steel Structural detail drgs, Familiar in Int.stands.Exp.in High Rise, Industrial/Commercial Bldgs, Housing, Airports

Entery level AutoCad Drafter/Desingner. Associates of Aplied Science in Computer Aided Engineering and Design, work expierence includes construction and mecnanical background.

I have been working in the mine industry for the past 30 years. Recently reassigned to site services for DeBeers Canada Snap Lake Project. Currently gaining experience on the several sizes of Komatsu loaders, Bobcat, Dozers, Water and Fuel Truck.

Many years of experience, very detailed orientated.

MEP Manager ,MS Office & Internet,AutoCAD,Communication ,Negotiation,Co-Ordination &Organization,Effective Time & Coast Management Skills

Senior Manager looking for a new challenge with expectations of executive advancement upon successful proof of capabilities

Electrical engineer with experience in oil field electrical construction works. Possess IRCA cerification for Quality Management System and MS project and autocad 2000 certification

Twenty plus years of experience in electrical construction, maintenance. International experience in Middle East and South America. Willing to discuss any and all opportunities available.

46 years international experience in EPC project management in oil, gas, power, petrochemical plants, refinery, iron and steel plants, mining, mineral processing plant and infrastructure design and construction. Activities include FEED to project delivery for greenfield and brownfield projects.

Civil Engineer with seven years experience in project control, construction and management of civil works for the most important projects in Ecuador, including oil and gas companies, power plants, access roads, fiber optic, pipelines. I am willing to travel anywhere.

I&C Technician with geothermal experience

QC Engineer/Inspector (Piping/Welding) with CSWIP 3.1

A well organized, dedicated professional, developing, presenting, and implementing value added recommendations for the improvement to the companies overall goals and employee¡¦s performance.

Manager of Metallurgy, Process Engineering, Project and Construction Management.

I am retired from the Royal Canadian Mounted Police (R.C.M.P.), having left in July 2006 with almost 25 years of service. Since then, I have obtained my P.I. licence and conducted investigations for different firms

21 Years Experience in EPC/LSTK Project estimation, proposal, marketing, planning, project procurement and project management for Refinery, Petrochemicals and Fertilizer Plants like Ammonia, naphtha Cracker, PTA, Hydrocracker, DHDT, Sulphur and other units. Presently working with L&T, india.

Worked as a Engineer Projects & Purchase.

I have many years of experience in customer service and administrative work. I am organized and skilled with many computer programs.

Objective: To work for a company as a Supervisor/Foreman/Journeyman carpenter. To use my skills to the best of my ability.

Construction Supervisor for Electrical and Instrumentation

Recent graduate with a Bachelor of Applied Science in Instrumentation seeking employment for supervisor positions within the instrumentation field or as an E & I Specialist.

I have 3 yrs of experience in multi-storey constructions.

ARCHITECT WITH 03 YEARS INDUSTRY EXPERIENCE

Planner / Scheduler: 2 Years Experience, Site Engineering: 1 Year Experience Developing Schedules, Resource Allocations, Planning Spreadsheets, Deployment Schedules, Charts, Progress Reports. Review of Contractor’s Programmes, Specifications, Contracts. Tracking Correspondences, Archives.

Project Management and Mining Engineering Professional with 19 years experience

QA/QC/Inspecion/Metallurgical Engineer

BACHELOR OF ENGINEERING in ELECTRICAL AND ELECTRONICS ENGINEERING, EXPERIENCED IN SUBSTATION AUTOMATION AND OPERATION SYSTEM

I have 35 years experience in the security field.

M.S. In HRM, BBA in Management with three years of contract management experience in Africa and Gulf.

An ambitious and highly skilled Quality engineer with extensive experience in quality engineering, ISO certification, production, management, product development and launch, and customer support.

Self-motivated young competent Mechanical Engineer with nine years experience with Oil companies and leading construction and contracting firms. Have proficiency in independent project execution. Possessing a Diploma in Mechanical Engineering. Able to independently plan, and execute Projects related

Microstation CADD Civil Engineer Utilities Specialist and GIS

Quality control and quality assurance of control systems and networking

Power Transmission Line & Lighting of Highways (design overhead lines, instillation, maintenance, modeling, coupling, pipeline, cable size, poles, illumination (lux) & cd/m2 calculation)Low Frequency Electromagnetic Field (Transmission Line) Environmental Radiation Effects on Human Health/ Mitigatio

Post Diploma In Automobile Enginee (4 1/2YRS) / Experience 17Yrs / Commercial Vehicles, Construction & Mining Equipments - Maintenance Management, Service Maanger, Workshop Manager, etc.

welder helper \ carpenters helper

I've been working as HSES Advisor more than 7 years in different oil& gas projects such as LNG OP-s,Offshore and Onshore Pipe laying operations,platform constructions, Flotel, diving operations etc.

Versatile, knowledgeable, exploration geologist

2 years of experience in Automotive & Power Industry, Cae ,TYRE, Design engineer, R&D

Construction & maintenace of installations, equipment and systems in hazardous areas (explosive gas atmosph.); Maintenance of el. equipment, installations in petrochemical industry.& el. Equip., systems in El.Power Plant ; Training el.personnel for preventive & predictive el. maintenace programs

Senior Project Management, Profit and Loss, Project Planning, development and execution. Consultancy in the areas of safety, risk management, and techncal writing and editing. Major contract administration for a multi-national firm in Saudi Arabia on two different assignments.

Field Engineer / Estimator / Senior Piping Designer / Squad Lead-Checker

With excellent communication and coordination skills, I have the ability to lead a team to success and deliver projects in the given time frame. I am confident that my positive approach towards my work will benefit the organisation. My strength lies in my hardworking nature, sincerity and the willin

SAP MM Module

An experienced multi-disciplined electrical engineer with 28 years experience in the oil and gas(onshore and offshore), petrochemical, construction industry with functional expertise in project management, materials specification and procurement, sales distribution, marketing and business developm

Experienced Nine Year Superintendent Commerical / Residential

First Prev 51 52 53 54 55 [ 56 ] 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out