Resume - I am currently on another project but can leave with a two week notice.

Misco Jobs

Resume #3101

CONTACT INFORMATION:
View contact information...

SAFETY COORDINATOR

SYNOPSIS OF EXPERIENCE
Twenty-four years of construction experience, ten years experience in construction safety. Training and responsibilities have developed through field experience and training.

EXPERIENCE

Qaulity Inspection Services/Kern River Expansion 2003 Project 6-02 to Present
Lead Safety Coordinator:Duties included managing the project safety team while coordinating with the contractor safety personnel, overseeing safety coordinator manpower and assignment changes, evaluated the effectiveness of contractor safety programs, site audits, conduit for all accidents and injury reporting, assist the safety coordinators in the accident investigation of all serious accidents and injuries, representing the safety team in all project management conference calls, responding to information request from the project owners and managers, leading the weekly safety conference call with all project safety coordinators and contractor safety representatives.

Cleveland Inspection/Gulfstream Natural Gas: 07/01 to 06/02
Safety/ Environmental Inspector: Duties included the management of contractor in regards to safety and health issues. Accident investigation, implementation of contractor policy and procedures.

Alliance Pipeline: 11/00 to 07/01
Safety Advisor US Field Operations: Duties included site inspections, incident investigations. Assisted in writing safety, DOT, and OQ policy and procedures. Smith Systems driver training, drug screening, and all other training associated with my qualifications.

NPSW/The venture Bolingbrook Ill. 10/00 to 10/00
Nuclear Plant Shutdown
Safety Representative: Duties included jobsite inspections, conducting safety meeting, accident investigation. Implementation of policy and procedures.
Universal Ensco/Alliance Pipeline- Houston, TX 10/99 to 10/00
Pipeline Safety Advisor: Duties included the management of contractor in regards to safety and health issues and policies as mandated by OSHA and Alliance pipeline. My responsibilities covered four compressor stations from North Dakota to Minnesota.
IMTC- Westlake, Louisiana 8/97 – 8/99
Pipeline Safety Representative: Duties include implementation of safety procedures, safety enforcement, job site inspections trench inspections, conducting safety meetings, DOT and NON DOT drug screening, incident investigation, and first aid and case management.
THOMPSON INDUSTRIAL SERVICES (TIS)
Charleston, SC 12/95 –5/97
Safety Coordinator: Duties included implementation of safety procedures, safety enforcement, writing and editing safety plans, employee safety orientation, job site inspections, trench inspections, conducting safety meetings, drug screening, incident investigations, first aid and case management.

TIS PROJECT ASSIGNMENTS
Showa Denka Carbide- Ridgeville, SC – Maintenance
Nucor Steel- Charleston, SC – New Construction of Steel Mill
Monsanto Chemical- Fayetteville, NC – Dry Ammonium Glyphosate, New construction
Black & Veech- Charleston, SC – Westvaco Chemical Cogen, New construction
Westvaco Chemical- Charleston, SC- Maintenance & Shutdown
Bayer Corporation- Goose Creek, SC- Maintenance & Shutdown
Westvaco Lumber- Charleston, SC – Turnaround
Amoco Chemical – Wando, S C – PTA Process, New Construction

DAVIS INTERNATIONAL- CITGO Refinery- Lake Charles, LA 3/92 – 12/95
Electrical Helper: Performed all duties associated with assisting an electrical journeyman.
Safety Assistant- Duties included employee orientation, conducting safety meetings, administering first aid, assisting with job site inspections. Also performed inspection of trenches, safety harnesses, ladders, fire extinguishers, and assured grounding.

LAKE CHARLES CONSTRUCTION- Lake Charles, LA 6/95 – 12/95
Safety Technician: Responsible for on-site safety, employee safety orientation and conduction of safety meetings at the Players Island Casino job site.

MYERS WELDING- Lake Charles, 1/92 – 3/92
Safety Representative: Duties included implementation of safety program, enforcement of safety standards, conducting safety meetings, administering first aid, communicating with OSHA to ensure implementation of safety program and conducted shop and field inspections. Also served in the capacity of shop coordinator, expediter, timekeeper and inventory dispatcher.

WOLFINSON ELECTRIC- Houston, TX 5/91 – 12/91
Electrical Helper: Duties included inspection of fire extinguishers, ladders and harnesses, daily truck inspection and monthly-assured equipment grounding. Also performed the duties of electrical helper, purchasing expeditor and inventory control.

Education:
1997 to present
Louisiana State University at Eunice: Working toward Associates Degree in Fire Science \ with a
Concentration in Industrial Safety.
12/95 - 6/96 Associate Builders and Contractors: Construction Site Safety Technician course.
07/95 – 7/95 Bureau of Emergency Medical Services: First Responder course.

Training:
2000 First Responder Refresher
1996    Blood borne Pathogens
1995 Dupont Safety Audit Seminar (6 hr)
1994 ABC Electrical and Instrumentation Level 1 (ELM)

Certifications:

•     Construction Site Safety Technician (100 hr)
•    Associated Builders and Contractors Train the Trainer
•    National Safety Council Traffic Control Instructor
•    3M Respirator Fit Test Certification
•    First Responder (40 hr)
•    Plank Speed Shoring & Trenching Seminar (8 hr)
•    Fork Lift Operator
•    Boom Truck Operator
•    Fire Watch – Qualified
•    T-2 (40 hr) Required for Offshore employment
•    Basic Production (40 hr) Required for Offshore employment
•    McMillan Water Survival (10 hr) Required for Offshore employment

References: Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 901 to 950 of 4374)

Go to Search Parameters...

Brief Description

Moving to Georgia Thomaston Area need work.. by 4/01/04

35 continuous years of national and international commercial construction experience

The resume summary is included in the resume.

I am very experienced and have worked at all levels worldwide and also worked with many nationalities. I work very hard and get on well with everybody.

Mechanical & Electrical Engineer Location East London, Essex, Kent, Greater London Salary To £30,000 plus package

Safety Manager seeking position

Crane Operator

Civil Engineer with solid background in structural design, experience working with oil companies. Project supervision experience, costing and evaluation. Vast field experience leading working crews and supervising jobs. Good communications skills. Multilingual, speaking Spanish, French and Italian.

Experienced in power plant operations and startup.

international c.v.

Mining Engineer and Geologist with twenty-seven years’ experience in precious and base metals, coal and industrial minerals. Professional Engineering licenses in three states, with unique construction and engineering achievements. Advanced technical and strong supervisory skills.

Work Experiences : Mechanical equipment and piping installation in the following industrial plants: 1) Natural gas plant 2)Power plant 3)Polypropylene plant 4) Oil Refinery 5)Desalination plant 6)Steel mill 7)Foundry plant(maintenance of mechanical equipment)

I have been working in construction industry for Oil & Petrochemical Plant for decades. I work well under pressure and very keen on project planning and management. I am confident in leading a team of sub-contractors in performing sophisticatedly for any petrochemical processing plant.

NACE Certified Coating Inspector #7278, with +20 years of experience, available as (3rd party) Q.A./Q.C. coating inspector, coating surveyor, coating supervisor, vendor surveillance, etc.

I have been working in the Construction Industry for 40 years at all levels up to Construction Manager. I have extensive experience overseas including Africa and Asia. I am looking for similar work and am prepared to work anywhere at immediate notice.

23 years experience in the Electrical Distribution/Electrical Contractor Industry. Wish to acquire a part time or full time position in an office or job site environment.

Job objective: General Supervisor, Field Supervisor, Project Manager or Assistant Project Manager. Interested in overseas opportunities.

Looking for a new challenge at the end of 2003 my present contract end then

S.M.A.W.welder/demonstretor/application engineer in a welding electrods company xperience 8 year as welder/fabricator and 2 year as application engineer and demonstretor greduate and computer littrate

Heavy Equipment Operator Grader, Excavator all sizes, front-end loader and dozer, Class A CDL with all the endorsements

3-D mapping, preparation of Face logs, monitoring & analysis the defomation

Supply Chain Management, Cost Reduction, Global Product Management, Inventory Planning, Process Development, Cost Management, Vendor Management and Relationships

Repair and maintenance of class 1-8 trucks, trailers. Repair all systems of vehicles, including power, train, air, hydraulics, electrical, brakes, and transmissions

Has more than Seventeen (17) Years of continuous experience in Cost Engineering and Quantity Surveying works which involved the following:

Instrument engineer with around 15 yrs of versatile experience in the field of installation,commissioning , operation amd maintenance.

Drafting (Manually & computerized using AutoCAD 2D & 3D), Structural Analysis & Design of Building (Manually and computerized using STAAD & Microfeap Software’s), Construction Estimates, Plumbing/Piping Design, Surveying, Project Supervision and Computer Literate (Microsoft Word,Excel & Powerpoint)

Over 25 years of diverse and successful experience in material control in areas including: Nuclear/Coal Power Generation, Bulk Handling & Storage, Co-generation, Commercial Maintenance, Oil Refinery, Warehouse/Distribution, Shutdown/Turnaround and Outages.

Experience in all phases of material management & expediting, design office & engineering & project coordination. Experience in heavy construction including offshore oil platforms & related facilities, nuclear fuelled power plants, paper mill, chemical plant & overseas military facilities.

I am a Graduate Mechanical Engineer and have good proficiency in Computers. I have put in 13 years of hard work in Construction of Oil & Gas Pipelines, which has given me exposure in all fields like Project Management, Planning, Tendering, Cost Estimation and Control, Execution.

Geodesist/Land Surveyor/Geomatics/GIS consultant

Project Manager with over 35 years of experience in the construction industry, which offers an extensive and diversified array of industries such as power generation, pharmaceutical, semiconductor, large office facilities, pulp/paper and plastic projects, coal gasification and others.

Highly motivated and results-oriented professional with exceptional leadership and interpersonal skills with an extensive background in construction industry.

A competent Chartered Mechanical Engineer with over 14 years experience, gained in Aluminium, Iron & Steel, Nuclear & Petrochemical Industries. Worked in areas of Design, Construction, Installation, Projects, Commissioning, Overhead Cranes and SAP.

Piping/Mechanical Superintendent

System Admin for IT Industry.

RESIDENT CONSTRUCTION MANAGER / SUBCONTRACTS MANAGER / CONSULTANT IN CONSTRUCTION OF PETROCHEMICAL PLANTS (SPECIFICALLY HYDROGEN /SYNGAS REFORMERS, ETHYLENE CRACKING FURNACES, PETROCHEMICAL UNITS INCLUDING DETAIL PLANNING AND EXECUTION OF SEVERAL PLANT TURNAROUNDS PROJECTS)

30 years experience in all types of heavy industry, the equipment used, predominately in coatings and linings. Experienced in all phases of construction projects. Supervised numerous larger projects, overseen and implemented safety, inspection.

I am currently on another project but can leave with a two week notice.

I have been supervising and managing Building projects for the past 20 years With great success. I am not only a man Who is a supervisor but I have journeyman Level skills at most of the major trades, This allows me to insure proper quality.

results oriented, hands on, Construction Management person with 20+ yrs experience in various facets of the industry specializing in Industrial, Mining Construction. Prefers international or remote work location.

Have been in construction for 35 years

Experienced Maintenance Mechanic/Welder with twenty-five years in the maintenance field. Skilled in all types of mechanical work- hydraulic, pneumatic, conveying systems

Award winning Project Manager / Facilities Engineer.

Extensive experience in the construction of industrial buildings, Multi-story buildings, Steel Structures, Water Structures, Infrastructures Writing Progress Reports, Maintaining and Coordinating Construction work schedules Computer skills: Office 2000, Primavera 5.1, Auto CAD

Extensive background in the planning and profitable management of large scale projects/ programs in support of multi-million dollar business operations.

ELECT. ENGGR WITH 21YRS+ CONSTRUCTION SUPERVISION EXP.PG DIP IN CONST MANGMT AND MSPROJECT PI PPM. INVOLVED IN PROJ MANAGMT CONSULTACY FOR ELECTRICL/PLNNG COORD/QUALITY ASSURANCE COORD AND HSE MANAGEMENT.

Power Generation- Twenty-eight years experience of Construction, Startup & Commissioning, Operations & Training for Combined Cycle Units, Coal Fired and Nuclear Steam Supply Systems (NSSS) & Balance of Plant (BOP) Systems as Lead Mechanical, Lead I&C, Lead Operations and Startup Plant Manager.

I am looking for a full time work, anywhere

Twenty-five years experience in the construction/consulting sector.

I have a total of 20 years in heavy construction Safety

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 [ 19 ] 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out