Resume - I am currently working in an Offshore Vessel as an Electrician. I've worked exp...

Misco Jobs

Resume #31198

CONTACT INFORMATION:
View contact information...

CAREER OBJECTIVES: To have a challenging, rewarding and promising job as an Electrician.

Work Status: Currently employed in an Offshore Vessel.

EMPLOYMENT HISTORY:
September 2006 to Present GPS Saipem ENI Group
(Platform & Pipe laying Offshore Project)
Saipem DLV (Derick/Lay Vessel)
Castoro Otto

Position: Electrician)

* Synchronizing Powered Diesel AC Generator with PLC control rated 4200 HP, 5.5 KV for Vessel Power Supply.
* Monitoring MW Meters (Active Power), Excitation Current, Stator Current, RPM, instrument temperatures & pressure sensors.
* Hands-on trouble shooting of AC Generators and maintenance of electrical controls and other equipments such as Steam Boiler, Evaporator, Air-compressors, Bilge pumps, Actuator valve magnetic sensor, Incinerator, Fire pumps, Fuel transfer pumps, Water feed pumps, Oil & Water Separator, etc.
* Calibration of Pressure Switches.

February 2004 – Present Al-SUWAIDI INDUSTRIAL SERVICES
Project assigned to Saudi Petrochemical Company
(SADAF/ SABIC)
Location: Jubail, Kingdom of Saudi Arabia
Position: (Electrical Technician)

* Hands-on trouble shooting and maintenance of electrical controls and its electrical equipments even on hazardous location such as Industrial motor AC/DC.
* Performed Preventive Maintenance with Lockout/Tag-out (LOTO) procedures on motor control panels. Including MCC's, Switchgears, Motor Starter Breakers, UPS batteries & its chargers. Subsystems lightings and other control panel boards.
* Assist Engineering Utility personnel during trouble shooting and preventive maintenance of medium and high voltages e.g. 4160 V & 13.8 KV especially during turn around or shutdown activities.
* Performed functional testing in coordination with Instrument Technicians.
* Performed calibration using a current injector on overload relays and contact resistances testing. Also using Surge Comparison Tester, Megger or Insulation Resistance Meter and Multi-tester.
* Experienced on Variable Frequency Drive (VFD), SCR, PLC installation, Power diesel Generator and Motorized Operated Valves (MOV).
* Performed other related duties that maybe assigned from time to time.

July 3, 2001 – August 21, 2002 URBANA 2000
Project: Chevron Texaco (Oil & Gas)
Location: Malongo, Cabinda, Angola Africa
Position: (Industrial Electrician)

* Perform scheduled maintenance (corrective & preventive) on electrical systems.
* Hands-on troubleshooting & repair of electrical equipments.
* Perform scheduled maintenance (corrective & preventive) on electrical systems.
* Perform disassembly, inspection, repair, reassembly, adjustment, testing and calibration of electrical equipment and systems in accordance with pertinent technical manuals, drawings, manufacturer's specifications and standards.
* Diagnose and troubleshoot electrical problems.
* Requisition of necessary spare parts, tools and materials.
* Maintenance of low, medium voltage switchgears and breakers and cathodic protection systems.
* Ensure that all protective and emergency systems are functional and that all tasks are performed in accordance with pertinent electrical safety standards.
* Compliance with Common Maintenance Strategy (CMS).

November 1998 – June 2001 JTL CONSTRUCTION
Project: House & Building Wiring Installation
Location: Philippines
Position: (Building Electrician)

* Lay electrical pipes, cable pulling, Threading/bending of pipes
Such as Emt, IMC and RSCP.
* Install power Panel board, Junction/utility box, pull box, isolator switch, breakers,
Convenience outlet, switches and service entrance.
* Wiring installation, cable pulling and splicing of power & lightings.

February 1997 – October 1998 METITO ARABIA INDUSTRIES, LTD.
Project: Water Treatment Plant & Sewage Treatment Plant.
Location: Kingdom of Saudi Arabia
Position: (Electrical Technician)

* Erection of sewage & water treatment plant (reverse osmosis)
* Lay power cable; install cable tray/gutter, threading/bending of pipes, wiring & Installation of main & local control panel boards.
* Install float level switches, control panel boards high pressures pump, aerator pump, control valves, membrane & ultra violet ozone machine.
* Erection of raw water tank & potable water tank
* Loading Media filters inside the tank with large gravel# 203, medium gravel#197 small gravel #193, course sand #210, fine sand #207 & carbon.
* Project commissioning
* Housekeeping after each work

August 1996 – January 1997 ENGINEERING EQUIPMENT, INC. (EEI)
Project: Servicing/Maintenance
Location: Philippines
Position: (Industrial Electrician)

* Repair/maintain electrical equipments such as AC Diesel Power
Generator Mobile, DC Welding Generator & Air-compressor
* Do preventive maintenance as per schedule
* Render technical service to the client.
* Do house keeping.

March 1995 – September 1996 WILSON CONSTRUCTION
Project: Building Wiring & Installation
Location: Philippines
Position: (Building Electrician)

* Lay electrical pipes, cable pulling, threading/bending of pipes such
As Emt, IMC & RSCP.
* Install power Panel board, junction/utility box, pull box, isolator switch, breakers, Convenience outlet, switches & service entrance.
* Wiring installation, cable pulling and splicing of power & lightings.

July 1993 - February 1995 RIYADH DISTRICT WATER &
Project: SEWAGE AUTHORITY
Riyadh Sewerage Operation & Maintenance
Location: Kingdom of Saudi Arabia, Riyadh
Position: (Plant Maintenance Electrician)

* Obtained work permit prior to commence the work.
* Perform maintenance works on different stations of sewerage plant which Includes troubleshooting/repair, disassemble/assemble of 3 phase motors & Wiring installation.
* Assist Senior Electrician in heavy repairs of High and low-voltage switch gear & Air circuit breakers for industrial application.
* Also assist in synchronization of large AC Generator rated 2 MW.
* Do housekeeping after each work.

January 1992 – May 1993 AL-THINAYAN EST. (K.S.A.)
Project: Maintenance & Servicing
Location: Al-Qassim, K.S.A.
Position: (Pivot/Electrical Technician)

* Erect & install Pivot irrigation system.
* Repair & trouble shoot Pivot irrigation system and its electrical control system.
* Render technical service to the company's clients.

December 1990-December 1991 NEWTON ENGINEERING CORP.,
Project Maintenance & Servicing
Location Novaliches, Quezon City
Position (QA/QC & Service Technician)

* Perform series of testing/Check-up of Ac/DC motors, generator &
Transformer subject for repairs & evaluation.
* Use surge comparison tester, Hipotronic, vibro tester, Galvanometer, Megger or Insulation resistance, multi tester, temperature monitor, tacho meter, growler & Polarity tester.
* Conduct no load testing, current check, temperature, etc., for final evaluation of newly repaired motors.
* Render technical service to the clients.

EDUCATIONAL ATTAINMENT:

ELEMENTARY Banlat Elementary School
Date Graduated 28 March 1977

HIGH SCHOOL Pasong Tamo High School
Date Graduated 26 March 1981

COLLEGE FEATI University
Date Graduated 27 March 1985
COURSE Associate in Electrical Engineering (A.E.E.)

TRAININGS & SEMINARS ATTENDED:

May 3-9, 1992 Technical Service Seminars
Sponsored and Conducted by Valmont Industries Inc. USA

July 3-6, 2000 Personal Safety and Social Responsibilities
Conducted by National Maritime Polytechnic

October 28, 2003 Fall Protection and Ladder Safety
Safety House V.V. Soliven, San Juan, Metro Manila

November 4, 2003 Control of Hazardous Energies
Safety House V.V. Soliven, San Juan, Metro Manila

November 5, 2003 Basic Electrical Safety
Safety House V.V. Soliven, San Juan, Metro Manila

November 19, 2003 Confined Space
Safety House V.V. Soliven, San Juan, Metro Manila

November 22, 2003
1) Fire Safety
2) Hazardous Communication
3) Advanced Chemical
4) Manufacturing Ergonomics
Safety House V.V. Soliven, San Juan, Metro Manila

March 19, 2004 Permit Work Receiver
Conducted by: Saudi Petrochemical Company
Jubail, Saudi Arabia

January 2005-April 2005 Reflexology Seminar (Scientific Massaging)
Conducted by: Mr. Ramon Garcia
Jubail, Saudi Arabia

CONTACT PERSON IN CASE OF EMERGENCY:
Upon request

CHARACTER REFERENCES:
Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 3201 to 3250 of 4805)

Go to Search Parameters...

Brief Description

Certified Instructor and Operator of all types of heavy equipment

Free! I have 28 years of production and reorganizing operations to maximize their production and maintenance.

Quantity Surveyor

Management Representative (MR) for Quality Management System as Per ISO 9001

High - educated, experienced construction engineer. 10 years construction experience in civil building, high voltage electric lines, substations. Company management, team management, consulting.

B.Sc Engineering (Metallurgical), IRCA Registered Lead QMS Auditor, qualified EMS Auditor, Certified Quality Manager, Chartered Engineer (I) with over 30 plus experience in quality management field in oil and gas industry, having worked oversees since 1992 in Japan, Middle East and South East Asia.

Looking for senior position of project engineer electrical substation and T & D System, have MS from US in Electrical engineering and have over 17 yrs experiance of HV Substation Electrical field.

Indian, Chartered Civil Engr. Status, Aged 58, Civil Engg. Graduate (1970) With PG Dip in Management - 34 yrs in Engg / Construction out of which 25 yrs in O&G. Totally 21 yrs with Consultants / Clients & 14 yrs. with Contractors including 20 Yrs. outside India, in Nigeria, Oman, Kuwait & Qatar

Over 30 years of experience in the areas of QA/QC OBJECTIVE: A full-time position in Quality Assurance/ Contractor Coordinator/Construction Management.

A HIGHLY MOTIVATED AND COMPETENT MULTIDISCIPLINE ENGINEER with extensive hands-on experience in Offshore Oil and Gas projects and Power projects in India/ Malaysia/ Korea/ Brunei/ Singapore, who has developed:

Mechanical / Project /Construction & Commissioning Engineer/Manager BSc Hons.

25 years experience in Planning/Project/Detailed Engineering of Oil and Gas Plants, Petroleum Refineries and Petrochemical Plants

I inspect equiptment for faults & malfunctions, determine repairs required, do the repairs required and test them.

Skilled computer Technician/Technical Support/Trainer Especially Windows Office Suite

Exploration, Prospecting,Quality Control,Mapping,Surpac Mine Planning software, survey & Autocad

Dynamic, creative, and results-driven Materials Management Professional with a total over 18 years of experience.

My qualifications include City & Guilds Chemical Plant Operation, ONC & HNC Mechanical & Production Engineering. Refinery Operations/Commissioning/Planning/Inspection and Safety roles

Site manager, mechanical engineer, construction manager

Contract Administration, Cost Control, Project Control, Budget, Bid Qualification, RFP Preparation, Bid Evaluation, Pre-Qualification, Pre and Post Award, Insurance Qualification

Experienced Mining and Construction Supervisor, heavy equipment operator, driller, blaster, grade staker.

Free! Workshop management for the past 15 years of heavy equipment workshops inclusive of Caterpillar plant, heavy trucks , light vehicles, motorcycles, tractors and specialised agricultural equipment. Experience with external tyre contractor management and maintenance software programs.

Wide and varied technical experience in Engineering Project control services combined with excellent personal, customer facing and communication skills. Currently a member of the Project Control team responsible for the Planning / Scheduling, reporting, forecasting, and analyzing and recommendation

Geologist Engineer: Abble to work as an exploration geologist, mining geologist, environmental geologist

I am a certified electrical engineer with 15 years experience

I am currently working in an Offshore Vessel as an Electrician. I've worked experienced in Petro-Chemical Plant in Saudi & CHEVRON, Angola Africa as Maintenance Electrician. I am a Registered Master Electrician with PRC Licensed no. 0023265. I am currently looking for a job.

Electrical Engineer/Manager in Petrochemical Industries and Electrical Power Companies in Testing, Commissioning, Design, Projects, Plant Engineering, Maintenance, Operation, Technical Services, Training. Developement, System Improvements, Problem Solving, Analysis, System Study, etc

CSWIP 3.1 Welding Inspector, ASNT NDT Level 3, QC Engineer

International Engineer and MBA.

Very experienced Welder, Pipe fitter, Foreman

Construction Engineer/Construction Specialist/Electrical Specialist/Construction Manager

A multidiscipline Engineer with over fourteen years experience within the petrochemical, Oil and Gas industry. I have extensive hands on experience on a variety of machinery and have managed multi ethnic; multi disciplined teams on a variety of jobs. I can work to strict timescales and budgetary con

Attached please find my CV as application for the above or another suitable position.

I have over 16 years experience in Health, Safety, and Environmental (HSE) and have 4 years experience working overseas with employees from various cultures.

Operations, Purchasing, and Sales Manager

mining foreman and operator: 11 years experience; Mine operator Certification; Miner's Safety Training Fire and Aide Crew; Emergency Medical Technician; Experience running hydraulic excavators, motor graders, bull dozers, front end loaders, electric shovels, etc...surface mining

Preventive and corrective maintenance for engines amd pumps at Rigs

Good manager- exact-lovely-like travel-profetional in supporting in surface and tunnel excavation-english and arabic and farsi -hard worker

22 years heavy equipment operator

Inspection, Record Keeping, Supervision, Lighting, Fire Alarm and Communication Installations in all the buildings, Cable pulling/arrangement/terminations, Panel Installations, Cable tray and Assorted Fabrications, Piping( PVC and Galvanized Steel), Pre and Post Termination Tests, Maintenances.

Production supervisor. Supervision and management of numerous mining, earthworks and civil construction projects in Australia and Africa. Experienced in operation of all surface mining equipment. Training of operators.

Mechanichal Enginnering Diploma,AWS Certified Welding Inspector, Level 2 in RT,UT,PT,MT,VT

College education and master's degree in civil and environmental engineering within the research area of construction engineering and management

want to work hard ,best up to my level, in a progressive environment with a feeling of team work.

Besic Welding Diploma HOlds 2 position stick SMAW and 1 position flux core tickets from Canadian Welding Bureau Certification....WHMIS, Fall Protection, confined space entry, hoisting and Rigging , forklift ticket, occupational health and safety, hydrogen sulfide (h2s) , CPR,

Sr. PDS Piping Designer, Chemical, Petrochemical, Slurry esperience. Very strong in ALL elements of PDS including administration and support.

Engineer have Bsc. in civil eng. & higher diploma in water polllution control eng. with experience of more than 5 years in Building & environemtal works

Sales, Marketing,Business development,Automobiles, Spare Parts, Lubricants, ,Pipes, Construction Machinery,Trucks Concret Pumps, Tyres etc.

10+ years expereince in accounting, tax, audit. Expert in implementing MYOB Accounting

An M.Tech(Electronics) graduate with work experience in Industrial Automation, Embedded programming and teaching.Key skills include:SCADA, C, C++, Embedded C, VHDL, Verilog, MATLAB, Communication Protocols.At present, working for ABB India and has successfully completed a number of projects.

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 [ 65 ] 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out