Resume - Expert for OSP Survey, Planning, Design, Implementation and coordination

Misco Jobs

Resume #31251

CONTACT INFORMATION:
View contact information...

EMPLOYMENT OBJECTIVE:
Electronic Engineer for DCS, Automation, Instrumentation for any chemical processing industries for installation & maintenance.
Expert for Planning, design and Implementation of local area network(OSP) & Fiber optic cable networks/ Under ground Cables.
Project management, supervision and coordination.
Sales & marketing of Telecom products, Electronic and Biomedical equipments.
Installation of BTS and Antennas for GSM.
Estimation, costing, purchase and recruitment for turnkey projects.

EDUCATION:
N.E.D. Engineering University, Karachi - Pakistan, B.E. (Electronics) in 1990 with 1st Division. And Registered professional Engineer with Pakistan engineering counsel

EXPERIENCE:
There is 14 years of experience with International and National companies in key positions detail is below:

1. Al-Sharq Office Co. From 15/05/2003 till to date

PROJECT MANAGER Mecca and Jeddah for STC projects.
Project Manager in Digitized Planning System (DPS) for STC
Supervision of field verification groups and coordination with client.
Technical support to site and Engineering manager for planning, costing and engineering purpose.
Training and recruitment of manpower.
Training provide for STC inspectors
Design and implementation of STC 400K project
Survey, Planning, Forecasting and Design of Access and Secondary network.
New sites opening and establishing company independently.
Coordination with STC, Municipality and other government departments for execution of site work.
Execution of Cable network for secondary and primary network and RAN
Marketing and purchase of Equipment & martial.
Preparation and Estimation for STC for DPS project.
Presently working for Project Manager for DPS(Digitizes Plan System) for STC.
Designed two remote areas (Tuhay ang Hudjay at Riyadh districts) for secondary, civil and Primary.
Surveyed, Designed and implemented one remote village at Qunfoda.

2. Cooperative Company for Communication Systems: 29/08/02 till 15/05/003
Project Engineer (OSP)
RIYADH K.S.A
STC 45Ok and 400K Projects.
Approved Planning and Design Engineer for Saudi Telecom Company
Preparation for Work Plan, BOQ and Material & Equipment Management.
Pre-construction survey, prepare cost of project and required time, manpower, equipment.
Panning for against project, Martial & Equipment management,
Supervision of project for Civil works, secondary jobs.
Train Staff on equipment for usages of equipments.
Coordination with STC for productivity & Quality and Complete job in time.
Costing against projects and jobs.
Designed projects in Qasim district(Abu jalal, Abu Racab and Al.Rafjan) for secondary and primary cable network.

3. Norconsult Telematics Saudi Arabia: 1st October 001 to 18th September, 002
SPD Engineer for 450K STC Project/Regional Engineer.

Fundamental Planning, Survey, Forecasting Planning and Designing of 450 K STC Projects.
Planning, designing, forecasting, project cost and BOQ for local area network & fiber optic cable network.
Supervision of site investigation and collecting of field data and information to be used in preparation of demand forecast report.
Collect GPS coordinates to locate new sites in remote areas of western region
Preparation of demand forecast report, fundamental plan and detail design of out side plant under 450k Project of Saudi telecom Company.
Co-ordination with client for review design and attend regular meeting and prepare periodic reports.
Prepare alternate solutions for project in a limited budget for fiber optic net work.
Survey, Planning and Designing for more than 30 RANS sites in western region of Saudi Arabia.

4. National Telecom. Company: June 98 to Sept. 2001
(Telecom. Engineer for Central Region)
Tep-6(Biggest Subcontractor for Lucent Technology)
550K project directly From STC.
450K project directly from STC
long distance for STC Operation & Maintenance
Uniform contract for construction and maintenance directly from STC.
Planning and Execution of Fiber Optics and Copper Cable Network(OSP) for long distance, junction, CAN Ring, primary, and secondary network.
Preparation for Work Plan, BOQ and Material Management.
Pre-construction survey prepare cost of project and required time, manpower, equipment.
supervision in installation of Electronic Cabinets (RAN & Hrislus), MDF and Cabinets.
Supervision of all types of Cable FOC & Copper Cables jointing, termination & testing & measurement,
Installation of all type of telecom cables (fiber optic, duct and buried cables)
Supervision of all types of cut-over jobs for fiber optic and copper cable.
Well known about pair gain, WLL & SRS.
Supervision of Project Handing over documents, Flimsies & Site Diaries. Red Lines/As built drawings.
Supervised more than 100 technicians and supervisors same time and coordinating with 04 construction managers, Telecom Manager, STC for projects.
Monitored Survey of OSP, Long Distance Analog & Digital Microwaves SRS, WLL, Junction FON (Fiber Optic System SDH & PDH) and GSM for Operation and maintenance and installation and commissioning of GSM Network

5. DSI (PVT.) Ltd., Karachi - Pakistan 1995-98
Manager Maintenance for Hosiery Manufacturing Industries)
Supervision of maintenance of dyeing, finishing computerized continuous chemical processing (Long close & Heliot) industries.
Planning & Scheduling of maintenance work, Trouble shooting of DCS & PLCs, different processing control equipment as well as electrical panels, Motors, Motor drives.
DC drives, Float switches, Level switches and Trouble shooting & repair of electronic equipments.
Maintain the dyeing (Long close) & finishing machines(Heliot) and automated conveying machines for any breakdown.
Repair and trouble shouting of DCS & PLCs, Motor speed controllers Pneumatic system, level switches, flow meters, pumps, DC drives, and automation of industries.
Special Programming of PLCs for chemical processing for dyeing and finishing of cotton fabric(Tele mechanic, Square D, Honey well companies control systems).
Also Responsible for supervision of engineering team who handles pumps, Boilers, water treatment plant, Generators and Compressors.
Erection and Commissioning of plant.
Preventive maintenances and calibrations of motor speed controllers and other equipments.
Coordination with Production manager for maintain the quality of products.
Coordination with Electrical engineer for distribution of power.

6. SIPKA Mfg. (pvt.) Ltd, Karachi - Pakistan 1994-95
(Sale Engineer with 3M agency for Pakistan)

Sales of telecom cables & fiber Optics, Jointing material & Test Equipment.
Sales and marketing for 3M telecom product for out side plant.
Orange workshops and site demonstration for promotion of product.
Coordination with PTTs and telecom contractors for specifications and technical problems.
Field demonstration of 3M telecom (jointing martial and test equipments)

7. Alcatel Pakistan Ltd March 1992 April 1994

Site Engineer Telecom.
Survey, Mapping, Planning, Designing and implementation - 182 JK-BLT Project
Feb Fiber Optics Network planning, designing, & implementation of junction network, Copper Cable LNOP Planning, designing for primary & secondary,
Supervised fiber optic and copper cable Installation, Splicing, jointing, testing and up to handover the projects.
Optics Cable pulling, Splicing, Jointing, Termination and testing & Measurement.
Supervised Installation of copper cable, cable jointing, termination testing and extend of MDF.
Completed Training Programmed of Fiber Optic Cable Splicing, Jointing, Testing & Measurement.

Preparation of bill of Bill of quantities, Red Lines (as built drawings) documents for acceptance, Estimation of rehabilitation of existing Copper Cable Network.
Consultant of Subscriber Management, Coordination with Client, Electric Department and Municipality.

8. Aga Khan University Hospital (Trainee Bio-Medical Engineer) 1991- 1992

Supervision of repair of all kinds of Bio-Medical Equipment (Lab. X-rays and OP Theater)
Preventive maintenance and calibration of X-Ray machines and other equipments.

Languages: English, Urdu, Arabic (little)

SKILLS:
New sites opening and establishing.
Preventive maintenances and calibrations of motor speed controllers and other equipments.
Repair and trouble shouting of DCS & PLCs, Motor speed controllers Pneumatic system, level switches, flow meters, pumps, DC drives, and automation of industries.
Well known about DCS, PLCs and instrumentation for chemical processing industries.
Installation, Service and maintenance of Petrochemical processing industries(automation).
Preventive maintainers of bio-medical equipments and instruments.
Approved Design and Planning engineer for Saudi Telecom Company
Expert in the field of OSP for planning, Design, Construction and Installation
Expert for fiber optic and copper cable for installation, jointing and testing.
Installation of MDF, Electronic cabinets(RAN & Hirslu) and ODFs.
Survey, Mapping, Fundamental planning, Forecasting, Design, BOQ and Project costing for long distance, junction, canning, Access and secondary net work.
Computer Skills: Ms word, Excel and Micro station special design for cable network on a land base map.
All type of cut-over jobs for copper fiber optic cables networks.
Well known about STC existing network including SRS, Long distance, Access, Caning, junction, SDH &PDH Systems, Micro wave and GSM.
Sales and marketing of electronic, Bio-medical, telecom product including fiber optic cables, copper cables, test equipments, cable accessories. Jointing materials, pigtails, patch cables

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 701 to 750 of 4498)

Go to Search Parameters...

Brief Description

Railway Management

Dependable hard worker

Well rounded, skilled maintenance manager and equipment operator

I am structural engineer for more than 10 years

Structural Engineer

Civil engineer with 14 years experince (12 in saudi arabia). Skills include estimation, quantity take off, quotation requests, negotiations with suppliers, preparation of technical submittals, work progress reports, co-ordinations etc

Project designing electrical ,instrumentation & control systems.facility management services, operation maintenance and costruction

Project engineerig

Worked as Civil/Structural desgner and piping as well. Perform basic design calculation, planning, scheduling, project evaluation, specifications, bill of materials & cost estimates.

See Below

Result driven senior executive offering over 29 years of experience and success in driving operational growth, leading start-up and turnaround efforts, maximizing growth opportunities and ensuring compliance with legal and regulatory requirements.

Professional Profile Programme/project manager, confident, progressive and motivated. My background consists of consultancy and client side work, with programme/project management.

I am a hardcore professional with a Mechanical Engineer and more than 15 years multifaceted exposure in the Oil & Gas, petrochemical field. I was working with Brunei shell Petroleum for SAP implementation, and Petronas Gas Bhd, Malaysia, as a Maintenance Planning Executive in abroad.

I am actively looking for assignments which allow me to utilize my expertise and experience. I have created IT and communications infrastructure which allow me to work anywhere in the world with a telephone line.

CEO, COO and Division Manager of general contractor and construction management companies over past 13 years, with experience throughout US. Over 33 years of corporate, project, and field management experience.

An experienced civil and structural engineer. Strong background in steel & concrete structures and in marine engineering and hydraulic projects. Advanced Geotechnical knowledge. Design and supervision of construction.

Technical adviser . Machinery knowledge : Forklift, telescopic loaders-access platforms, platforms , scissors, construction cranes. Padi Instructor scuba diving,ANDI rebreather Istructor

PROJECT MANAGER

Architecture degree holder with 6 years experience in Vertical & Horizontal Projects and have knowledge to operate computer software such as: Microsoft Project / Excel / Word, Auto-Cad latest Version, Photoshop 7,CS 8&CS9, Sketch-up & 3D Max6 & Max 7 and developing in V-Ray for Design Presentation

Controll

Qualification: Masters in Transportation Engineering

Qualified for the maintenance of conveyer belts and pulleys. Trained in the field of petrolium and chemicals. Pressure testing and vessels. Willing to work on oil rigs.

BE in mechanical engineer well known experience in structural glazing ,clading,SS work,and all aluminum work

Mr. McKay excels at solving geotechnical and landfill problems and is available on a project specific or long term basis.

I have high experience in industrial and marine equipment: Oil Tankers, LPG, strong background in electric and electronic equipment, and base of pneumatic and hydraulic equipment. I have excellent experience in control panels, reading of electrical diagrams and modifying them

Free! Top-notch Instrumentation Technologist and Process control Instrument Group Leader for an US based MNC for the Central Engineering Division in Mumbai to meet the requirement of Asia Pacific and Europe who are pioneer in the manufacture of specialty chemicals with over 18 years of notable experience

Environmental, Infrastructure, Fuel Farm and Pharmaceutical project experience

3DS Max, Photoshop, CorelDraw, AutoCad, PageMaker

Graduate Quantity Surveyor/Estimator, 10 Years Experience with B.Sc., AAIQS, ICIOB and MA Cost E.

Instrrumentation design, detailed engineering, procurement, construction, commissioning

Expert for OSP Survey, Planning, Design, Implementation and coordination

Over 15 years international experience in ectromechanical, power transmission OHL and Cable Engineer

Senior Landman/ Right of Way Agent

Contracts and procurement, contract administration, expediting, negotiation,

Have 16 Years Experience in the field of Personnel & Administration in various construction Sites in India.

I have varied Experience of Project management & Execution of RCC framed structured high-rise Petrochemical building, Power plant Buildings, Heavy Rotating & static Equipment foundations, erection of related equipments, refinery civil & steel structural works etc.

I wish to be a member of a dynamic company that has long-term goals and continuing challenges in meeting those goals. Would like to be a part of a company that has a true philosophy of co-operative effort where difficult goals and challenges are accomplished by team effort.

mapping

Working in different areas.

Mechanical Engineer, Engineering Management, Project Engineer, Reengineering, TQM, Activity Based Accounting System, Production Planning & Scheduling, Budget Controlling, ARIS Toolset, Access

12 years experience in controls design and project management of complex automated systems.

Civil Engineer / Master's in Construction Co. Administration. Interested in Project/Construction Management positions that require all type of resource control and administration to meet contractual dates. Mexican citizenship. 100% English.

Rich experience in financial reporting and analysis function, more than 4 years practice in SAP, high skill level in operating in FI/CO/COPA modules, such as PS/CS/CATS.

PERSONAL EXPERIENCE(9 YEARS )

I would like to apply for a senior /executive position of highway /infrastructure projects

Forteen years of diversified corporate experience. Dedicated Accounting & Finance professional with extensive experience with: personnel management of large groups, development, project management, implementation and compliance monitoring of internal control standards, international logistics.

i am working as a TPI inspector in welding,piping,tankages,structural,vessels ect. and my basic qualification is DME and additional qualifications are AWS CWI, ASNT Level II in RT,UT,MP and DPT

As a Principal Process Engineer, supervised and executed over 20 basic engineering designs (grassroots and revamps) of ethylbenzene and styrene monomer units. Participated in 6 startups, 5 of which overseas. Also supervised or participated in numerous technical proposals and feasibility studies.

I am an Irish national wishing to gain work experience in the USA through the Non-Immigrant Work Visa program. I am educated to Masters Degree level, am a member of the Chartered Institute of Building (MCIOB) and have 10 years site-based management experience on a range of projects.

I have vast experience in site works and have a good knowledge of soil and rock anchors, drilling and grouting works, cast in place concrete piles, vibropiles, drilling drainage holes and weep holes, thin-wall works, slurry-trench, dewatering, sheet piles, deep excavation, pipeline construction.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 [ 15 ] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out