Resume - More than 8 Years experience in piping & Steel Structural pre-erection, post-con...

Misco Jobs

Resume #31954

CONTACT INFORMATION:
View contact information...

EDUCATION:
- Secondary School Leaving Certificate (S.S.L.C) from New Mangalore Port Trust (N.M.P.T) English Medium School in 1992.
- National Trade Certificate in Draughtsman (Mechanical) Issued by govt. of India from Govt. I.T.I in 1994.

COMPUTER KNOWLEDGE:
- Diploma in AutoCAD (Computer Aided Design) from National Academy of Computer Education in 1997.
- AutoCAD 2000 – 2D Drafting & 3D Solid Modeling. From Auto-desk Training Center.

Familiarity areas:
-Conversant with mechanical and piping drafting work;
-Experience in piping drawings for different piping system of Well-Head platforms, process platforms, Jack-up Rigs and Land Rigs;
-Preparation of As-Built drawings for Platforms and Rigs;
-Preparation of constructions Structural drawings of Jackets, Main-Decks and Heli-Decks;
-Preparation of Piping General arrangement drawings, Isometric and support drawings with
Bill of Materials to Facilitate Fabrication and Installation;
-Detailing of steel structural by referring general arrangement dwg;
-Familiar with different types of joints, valves, piping components, different types of supports;
-Familiar with custom-made piping classes, specifications as per each projects requirements;
-Engineering activities during pre-fabrication, erection and post-construction;
-Technical support to fabrication shops and construction force for piping supports;
-Preparing test packages i.e. piping sections for hydro static test and related documentation;
-Preparing "As Built Drawings" after final inspection of pipe lines;
-Preparing Weld Map on the isometrics and preparation of Material Take-off;

EXPERIENCE:

CAD ENGINEER (03-03-2002 to TILL DATE )Schlumberger Drilling Services. HQS Dubai, U.A.E.

Exposure withSchlumberger Drilling Services.:
-Preparation of As-Built drawings for Platforms and Rigs, Offshore & Onshore for example;
-Rig layout with major particulars;
-Drill Floor Layout;* Helideck Layout & Marking;
-Sub-structures elevation, B.O.P's arrangement, handling and work platform;
-HP & LP Mud & Cement Piping Systems, Standpipe manifold;
-Mud Treatment Diagram, MTT layout;
-Kill, Choke Lines, K&C Manifold, M.G.S & Vent / Flare lines;
-Bilge & preload piping diagram;
-DW & FW piping diagram;
-Crude/Diesel Oil diagram;
-Service Air piping diagram;
-Drawworks brakes cooling piping diagram; etc.
-Worked on jack-up rig AD-22 at Dubai Drydock; Preparing as-built of whole system of
Piping as mentioned above, Rig structural layout, as well as safety;
-Worked on land rigs Rig 19, 65, 07, 08, 65 in Oman; Peparing as-built of entire Rig
Including Piping, Rig Layout & Safety;
-Worked on entire Mud system(4,000 bbls) land rig AD16 Design for ARAMCO Saudi Arabia;
-Rig 65 Including structural & piping general Arrangements & Detailing.

EXPERIENCE:

CAD DRAFTSMAN (25-1- 2001 to 12-03-2002)Roy & Shenoy, Cad and Structural consultancy Falnir road, Mangalore-575004,INDIA

Exposure with Roy & Shenoy
-Preparation of ISO-metric Drawings of Piping;
-Preparation of Structural Steel fabrication detailing;
-Calculation of Bill of Quantities;
-Visiting site for measurement and preparing AS-BUILT Drawings;

Experience:
PIPING DRAUGHTSMAN (12-08-1999 to 10-08-2000)ABB Soimi S.p.A. at Polyethylene and Ethylene Plant, Shurtan Complex, Uzbekistan.ABB Soimi S.p.A is a member of Asea Brown Boveri Group. It is one of the leading companies involved in construction of gas chemical plants and refineries. Shurtan Gas Chemical Complex is a petrochemical project consisting of gas sweeting plant, an ethylene unit, polyethylene unit and associated offsite utilities and infrastructure.

Exposure with ABB Soimi
-Responsible for piping drafting and engineering activities during entire construction period;
-Preparation of cutting list, spooling;
-Inspecting field routing and preparation of as-built drawings;
-Providing technical assistance to the crew at shop and site during piping and supports erection;
-Liase with Toyo Engineering for technical clarifications;

Experience PIPING DRAUGHTSMAN (01-03-1998 to 10-07-1999)Larsen & Toubro Ltd. (Group I – Engineering Construction Company) at Mangalore Refinery & Petro-Chemicals
L&T (ECC) is leading construction company in India involved in construction of cement plants, Oil refineries, petro-chemical plants and power plants.
MRPL is an Indo-Japanese joint venture of a petro-chemical plant.

Exposure with L&T-ECC at MRPL
-Preparation of isometrics with supports for steam tracers by referring general assembly drawings of Toyo Engineering Corporation, Japan;
-Preparation of cutting list and spooling, checking Bill of Materials;
-Coordinating with Field piping supervisor;
-Preparing as-built drawings for small bore piping;

Experience 02-07-1996 to 15-09-1997STRUCTURAL DRAUGHTSMANM/s. ANS Constructions at Mangalore Refinery & Petro-Chemicals.
M/s. ANS Constructions is one of the foremost construction companies in India. Major QC and engineering assignments were carried out under inspection of Kinetics Technology of India Limited (KTI, MANESMANN GROUP).

Exposure with ANS at MRPL
-Checking bill of material;
-Preparation of as-built by manually tracing;
-Detailing steel structures drawings as per general assembly drawings;

Experience 11-03-1995 to 13-06-1996MECH. DRAUGHTSMANLarsen & Toubro Ltd. (Group I – Engineering Construction Company) at Mangalore Refinery & Petro-Chemicals.
L&T (ECC) is leading construction company in India involved in construction of cement plants, Oil refineries, petro-chemical plants and power plants.
MRPL is an Indo-Japanese joint venture of a petro-chemical plant.

Exposure with L&T-ECC at MRPL
-Preparation of cutting list and spooling, checking Bill of Materials;
-Fully responsible for pipe supports in fabrication shops;
-Preparation of as-built drawings;

I hereby confirm that all information submitted above is true to the best of my knowledge and I shall be glad to furnish you with any other detail you may so require.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4301 to 4350 of 4806)

Go to Search Parameters...

Brief Description

! have 23 years in the oil and gas industry with the last 10 in the pipeline control room. Handling 10000 miles of pipeline reciepts and deliveries.

10+ Years Experience PLC Programming PC Board Testing/Repair Test Point Systems

B.Tech Engineer having 2+ years of experience presently working as a planning engineer with Reliance ,Jamnagar for JERP project. Can handle softwares required for job accomplishment.

Geotechnical, Geological Exploration, Resevoir geologist

Proficient in Microsoft Office Programs; Familiar with OSHA and NFPA federal standzards; Technical Skills; Research Skills

I am interested in employment for any position where I may acquire new skills or my current skills may be fully utilized. I have experience in Crush and Convey, Leaching, Haulage, Safety and Environmental areas. Upon my employment I will bring a safe and positive work ethic to your company.

QAQC Inspector. I have Experience on both LNG Termals and Oil Refineries

I am confident that my training and experience in the area of safety and health as well as international teaching and program development skills would benefit a company that is seeking to excel in this area.

Im instrument Engineer ,experianced in controlling physical parameters(temp, press,flow) using microcontrollers,control aspects, designing new control systems,installation and maintainence

I have Masters Degree in Geology with experience in Coal Exploration.

CSWIP 3.1, ASNT level II in RT, UT, MT and PT, ISO 9000:2000 Lead Auditor

Construction Manager, Side Manager, Supervisor, Hydraulics Engenieer

My experience have given me a broad adaptation of works in various areas. I can and will succeed in almost every area of work as I am a practical and fast learner. I have sufficient knowledge in computer basics and literacy. I am a fast typist and can create text documents

I am an engineering graduate and i've been working as a material controller in a reputable company in qatar for two years. i am looking forward for a career growth and gain more experience. I am willing to accept any jobs which i am qualified of and my experience is necessary.

Organizational Development •Procurement & Purchasing Systems & Hardware • Operations Management •Business Development • System Analysis • MIS Administration • Inventory System Control • Team Management • Regional ICT Management • Regional MIS Management • Regional Database Management

Initially degree qualified as an Electrical/Electronic Engineer, I have been working in the field of DCS Control systems for the past 25 years. I have worked as a Field Service Engineer, Application Engineer, Systems Engineer, Commissioning Engineer. Primarily with Foxboro systems.

Project Control (Cost & Planning) with +5 years of exp

This letter is to express my interest in applying for an oil rig job. I have an Irish national craft certificate and over 7 years experience as an electrician. Ideally I would like to gain employment within my trade as an electrician, however I am willing to start at the bottom and work my way up wi

Worked in oil and gas industries for over 6 years as Planning Engineer and Project Engineer. Advance in using Primavera Project Planner Ver. 3.1. Language skills including English, Chinese, Malay and Chinese dialects. Worked in China for the last 3 years. B. Eng. from Melbourne University.

Free! In excess of 15 years Health and Safety experience. Strong coaching. Leadership skills and experience in BBS. Experience includes large 3D programs in all types of terrain including mountains, Arctic, and cold weather conditions.

Survey Technician/Mapper/Drafter

Draughtsman - Piping / Architectural / Civil. with extensive number of years experience

Supervise the execution of new 115/69/13.8kV projects (substations) from conception to completion.Design and development of all aspects of electrical system/facilities, substations and distribution

Seeking a position in Quality Control/Assurance Management where my extensive background, abilities and expertise will be used efficiently.

Instrument Technician with Overseas Russian Experience.

Demonstrated planner with diverse experience and knowledge in Airport project, Gas and Oil Projects and general MEP projects. Strong Engineering and Management background combined with certification in project management courses. Adept at learning new concepts quickly, works well under pressure

Extensive working experience in Chemical Processing, Power Generation and Oil & Gas Industries. Versatile team player with an ability to incorporate new concepts and interact with all levels of professionals. Expertise in Project, Maintenance, Materials Management and ERP (SAP, MAXIMO, Primavera R3)

Over 20 years of experience in a career, dedicated to the provision of engineering services in the development of Maintenance Engineering and completing major projects. I am, most adept at successful employment in a multi-discipline environment.

Highly qualified HSE Contractor looking for overseas positions.

Environmental Consultant (Engineer/Scientist)/Geoscientist

I am a Survey Engineer, experienced in multi disciplinary projects, with a good track record of world class projects. I am highly interested in any position with international or overseas exposures and possibility to maximize skills in Surveying, Management, acquire new ones and progress.

More than 8 Years experience in piping & Steel Structural pre-erection, post-construction engineering activities, and Oil Drilling Services on Land and Offshore Rigs; Worked in Middle East, Central Asia and India under international and well-known construction companies like Schlumberger Drillin

Dear Sir, I am a highly motivated person who works hard to accomplish my vision for the Future. The success of your company fits perfectly within my vision, and I firmly Believe I possess the tools to help your company thrive. In my most recent experience, I took on a leadership position a

I am a professionally qualified Process Engineer with experience of process and product development, as well as quality control at Energy and Telecommunication Industries. I am accomplished to multinational environment, related to process modeling, project leadership, quality control and auditing.

PGDMS from London.A+ honours in hardware engineering. C, C++. Working knowledge of microcontroller programming and hardware languages.

33 Year old Dutch national with 10 years of HDD project management in Asia, Europe and FSU, now living in China.

Chemical Engineering, Control System engineer. Pipeline operation. Catalyst

pdms 3d cad autocad cadworx sr designer mechanical drafter field engineer walkdown

Professional Objective: To continue working as a Quality Assurance, Construction Representative, Pipeline Welding Inspector, Non Destructive Testing Inspector, Radiographic Interpreter, for a major proactive organization.

My objective is to secure a challenging position in the natural gas, oil or petroleum pipeline industries as an operations and maintenance supervisor or as an inspector. I have over 25 years of progressive experience in the natural gas transmission and distribution pipeline industry.

Civil engineer, project management, site management, cost estimation, Russian, English, Turkmen speaker, CIS experience, Siberia, Russia, Turkmenistan, Kazakhistan

Mining & construction Equipment, Oil field production, Power generation

Journeyman Heavy Equipment Operator/Foreman 10 yrs exp.

Familiar in Auto cad (2D&3D), Microstation & Ms Office. Strong practical knowledge of Electrical. Good team player with supervisory skill

Results-driven Industrial Maintenance Planner/Scheduler offering 15+ years of extensive hands-on industrial maintenance experience, committed to efficiently manage and plan machine maintenance.

Livelink Administrator, Causeway Collboration Administrator

Surveyor and navigator (I love trouble shooting)

29 Yrs + Contracting within Materials Management & Logistics, Onshore, Offshore & Overseas currently employed upon a consultancy basis by Rolls-Royce having just completed a contract with “NSSE” where I had been their Materials Manager (see CV)

Catia, Solid Works, Solid Edge, Pro/ENGINEER, Adobe, Microsoft Office ( PowerPoint, Access, Project ), Photoshop, Blue Prints, Design, Product Development, Plant Layout Strategy, Six Sigma, Lean Manufacturing, 5S, , Injection Mold Press, Class A/CDL license, Lathe, Forklift, Donkey-lift, Milling

PARAMEDIC(ADVANCED LIFE SUPPORT)/FIREFIGHTER/ EMT RESCUE TECHNICIAN

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 [ 87 ] 88 89 90 91 92 93 94 95 96 97 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out