Resume - Instrumentation Supervisor

Misco Jobs

Resume #32250

CONTACT INFORMATION:
View contact information...

I am an Instrument Engineering Technologist with valuable experience in construction, commissioning, and maintenance of oil and gas facilities. As an Instrument Project supervisor, and Commissioning coordinator I have gained valuable management and personnel skills and possess a good technical aptitude of the field of instrumentation. Previous employers will affirm that they entrusted me with major responsibility and that I adapt well to change. I look forward to new challenges and strive to be the best at what I do. I enjoy working in a team environment where safety and professionalism is of the utmost importance. Working on the Syncrude UE-1 up grader expansion, I had the privilege to work along side professionals from many different nationalities and enjoy this very much. I am married to Thai national and am seeking international employment which will allow me to live and work out of Thailand.

EMPLOYMENT

11/04-Present Commissioning Coordinator, Emerson Process Management
Syncrude UE-1 Project, Ft. McMurray, Alberta

Commissioning Coordinator for the power plant and water treatment plant DCS modernization. Modernization involves the upgrade from Fisher Provox platform to Honeywell Experion platform. Modernization involves verifying the existing I/O to the new Honeywell Experion platform prior to swing over.

09/03 – 11/04 Instrumentation Maintenance, PowerComm
Hardisty, Alberta

Contracted full time to Gibson Energy, where I perform maintenance for their Pipeline Terminal, Pipeline Pumping Stations and Fractionation facility. Research, provide quotes, and purchase all instrumentation devices and systems. Troubleshoot and Program Allen Bradley PLC systems such as SLC 500 and PLC 5. Calibrate, troubleshoot, and maintain plant analyzers such as Gas Chromatographs, Online Solartron Densitometers and Viscometers, and water in oil analyzers. Gained experience in Telvent Scada systems and Omni flow computers. Commissioning and start up of new plant projects. Provided procedures and updates to Maximo maintenance system.

04/03-09/03 Instrumentation Project Supervisor, PowerComm
EnCana High Ethane Recovery Project, Empress Alberta

Overlooking and managing all aspects of instrumentation calibration, installation, and
Quality Control. Commissioning and start up support.

10/02-06/03 Communications Commissioning, PowerComm
Shell Scotford Upgrader, Fort Saskatchewan Alberta

Revised and commissioned Modbus RS-485 communications for Electrical Heat Trace panels throughout every unit. Worked in conjunction with Colt Engineering to review Allen Bradley DeviceNet communications installation and present problems and solutions to network problems. Added a PC interface for each Allen Bradley DeviceNet network. Provided Instrumentation and electrical support to plant maintenance staff.

05/02-10/02 Instrumentation/Electrical construction and commissioning, PowerComm
Enbridge, Kirby Lake Compressor Terminal Project.

Installation and commissioning of both instrumentation and electrical systems. Performed all communications installation of modbus communications for Multilin high voltage relays and Rotork valves. Terminated PLC cabinets and other electrical devices. Involved in plant startup and commissioning.

04/02-05/02 Instrumentation Construction, and Commissioning, PowerComm
CNRL Wolf Lake Tank Farm Project, Bonnyville, Alberta

Installed, Calibrated, and Commissioning of all instrumentation. Gained some valuable experience with Endress Hauser radar level transmitters, as well as Fisher Provox.

10/01-04/02 Instrumentation Maintenance, Construction, and Commissioning, PowerComm
Husky Oil, Lloydminster, Alberta

Managed all aspects of instrumentation calibration, installation, commissioning and start up for Husky Oil Celtic Steam Pilot project. Gained valuable experience in steam generator control. Commissioning and start up of Husky Oil Lashburn Treater Project. Performed different maintenance tasks for a variety of Husky sites.

05/01-10/01 Instrumentation Calibration and Construction, PowerComm
Williams Energy Polypropylene Project, Redwater, Alberta

Performed over eight hundred calibrations for a wide variety of instrumentation. Performed construction tasks such as running tubing bundle and mounting instrumentation.

02/01-05/01 Instrumentation calibration and control valve repair, PowerComm
Edmonton, Alberta

Performed calibrations for a wide variety of instrumentation. Rebuilt a wide variety of Fisher control valves and associated Fisher products.

EDUCATION

03/04/2003 Instrumentation Technician Journeyman
Alberta

01/06/1998 Instrumentation Engineering Technology Diploma
Northern Alberta Institute of Technology

28/04/1995 Accelerated Pre Technology Diploma
Northern Alberta Institute of Technology

27/06/1994 High School Diploma,
GHP Primeau, Morinville, Alberta

CAPABILITIES
* Speak Thai and French
* Experience with numerous computer programs
* Good management skills
* Learn quickly and enjoy learning
* Can deal with high stress situations

CERTIFICATION
* RSLogix Training
* Omni Flow Computer Training
* Interprovincial Certification
* H2S Alive training
* Emergency First Aid Training

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4451 to 4500 of 4757)

Go to Search Parameters...

Brief Description

Human Resources Generalist

B2B Marketing, Product Development, Dealer Management, Market Research

Ms-word,Ms-Excel,Proficient in management,General HSE certification, HSE Competency Development Course Level 3

If you need a dedicated expert heavy equipment/drill rigs/are welder/fab/design, hydraulics, air compressors, all around field/shop management, i can design/build & repair anything with or without a big budget, will work on contract are as needed!!

Cummins Sales & Service Pakistan (Power Generation)(Nov2007 – to date)Mining Experience(2004-2007):

Daily rotational positions including, Operation of Kranco over-head charge crane with 15 and 50 ton hoist, Kranco over-head make-up crane with load lifting magnet & clam shell bucket, Deck operations for 2 Brown Boveri 55 ton coreless furnaces

NDT TECHNICIAN

Project Manager, Plant Technical Manager, Interface Engineering Coordinator, Pre-commissioning Engineer, Commissioning Engineer, Start-up Engineer, Process Engineer, Chemical Engineer

Instrumentation Supervisor

iosh managing safely and osha in construction safety and health qalified hse officer with 9 yrs experience in safety. other trainings attended: basic rescue, work safely at heights, scaffolding, first aid, fire fighting etc. work experience in india and middle east in construction projects.

Tehnical Skill: able to fix trouble shooting such as : Hydraulic, Electric and Power Train system of heavy equipment. Abel to manage more then 250 people subordinates

Sr. Health & Safety Engineer - OHS Procedures, Training, Inspection, Audit; HSE Plan, Objectives, Matrix etc.

Detail oriented Instrument and Controls technician seeking international opportunities

20 years experience in Industrial Electronics, Electrical,Mechanical, Pneumatics, Hydraulics

Involved in all construction activities including fabrication , installation and control off all structural items.Steel structural estimates include, pipe-racks, elevated pipe supports, pump shelters, access platforms, handrails, et

2 years experience in an Open pit coal mine. I have done long term planning for pit and dump, various professional reports, tailings dam design and monitoring, and yearly budget planning. Therefore, I have experience in both mining and geotechnical engineering.

Mechanical Engineer, 12 Years Gulf Experience In Maintenance Department

I am a current registered EMT Paramedic Assessor and First Aid Instructor. I am now working in a local company as a Safety cum Fire Safety Manager. My responsibilities include coordinate and conduct training, investigate and writing incident report, ensure safety at workplace comply.

I have ability on heavy duty equipments operation,fms dispatch system using high technologies,mine supervision as well.

Dynamic Health & Safety Coordinator Looking For Work In Mining, Heavy Construction Or Oil Industry

im interested in doin marine and i spoke wel in english and i know hindi also and my specification is doin work in any circumstances

International Safety / Risk Professional available for fulltime or contract employment.

Workplace Safety Health Environment Coordinator - Moreton Island Oil Spill Clean Up Project

12 years experience in instrumentation mining processing plant.holder of a craft certifitecate in process control instrumentation.

Finance, Investment Banking, Management consulting

I have my fisrt degree in ghana in one of the best universities in the country as well and am currently working with one of the biggest mining company in the country too.

departmental administration work, sales coordination, tender preparation, individual material costing. B.Sc. (Maths), Certificate and Diploma in Computers

I would like to apply for a position where I can use my extensive experience in Managing, Coordinating, Supervising, Inspecting and Maintaining and my dedication to quality in Systems installation, Electrical engineering, Maintenance and Repair to help you obtain your company's mission.

Power mechanical engineer 2001 good

Experienced in construction and repair of recovery and power boilers, exchangers, vessels, light and heavy plate work, basic pipe and structural fitting, as well as work on mild steel, stainless, and aluminum.

To pursue my career in the field of Construction/Consulting/Project Management Services as a Projects team member, with a challenging and competitive work environment that best utilizes my technical Skills, Experience and Enthusiasm.

As for my educational qualification, I wish to state that I am a Diploma holder in civil engineering. I have completed AutoCAD 2000, Architectural Desktop R-3, Structural Analysis & Design(GT STRUDL), MicroStation SE. Photoshop 5.5

Commissioning, servicing, maintenance, diesel gensets, engine-alternator alignments, overhauling diesel engines.

an economics graduate from olabisi onabanjo university. i also belong to a professional memeber of the institute of chartered accountant of nigeria.

Blueprint Reading - Mig, arc and gas welding

Higher Diploma In Business And IT, UBS Computerised System, Basic Knowledge Of Computers And Web Publishing

HSE ENGINEER AND SUPERVISOR

Oracle, LPN, 3PL, Supply Chain, Imports, Logistics

Graduated 09/2004 in Master of Science (Mechanical Engineering) from The University at Buffalo, The State University of New York. Emphasis: Design Optimization. 8 years experience in facilities management (water, fire protection). Extensive experience in South and South East Asia.

Twenty-two years in leadership and management with ten years experience in the Petrochem/Paper Mill industry. Ten years in health and safety in the fields of general construction, maintenance, Turn Around/Shutdown. Able to identify at risk behaviors, trends, and policy infractions through observati

BE in Mechanical Engineering.

Electrical Apprentice/ Skidsteer Operator/ Forklift Oper ator/ Labourer

Logistics/Shipping Coordinator with 6 years experience in an EPC company handling various oil and gas projects worldwide. Proficient in logistics operation, with good communication and negotiation skills and could lead a group of people in a project.

Maintenance Technician

Plant / Substations Operation, Maintenance and Testing

Experienced CAD-GIS Professional/Consultant with years of experience in Autodesk design softwares such as AutoCAD, Civil 3D, Map 3D, MapGuide Enterprise and Raster Design.

Marine Geologist with experience in Bathymetric, Oceanographic, Geophysical and Geotechnical Data Processing and QA/QC. Proficient in MicroStation, uSMART and InRoads mapping softwares.

To obtain a challenging, high demand QA/QC, Power Generation Tech, Electrical or Mechanical position utilizing my skills and experience in all fields.

Catia V5, Unigraphics, Pro-Engineer, Solid Edge

Working as a Piping Supervisor in the field of Oil/Petro-Chemical industries Maintenance & Project Work.

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 [ 90 ] 91 92 93 94 95 96 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out