Resume - 9½ years specialised experience in piping of Petrochemical plants, Refinery & LN...

Misco Jobs

Resume #33496

CONTACT INFORMATION:
View contact information...

Objective: Piping Engineer

EDUCATIONAL QUALIFICATION
Diploma in Mechanical Engineering From Thiagarajar Polytechnic, Alagappanagar, Under Kerala Technical Education Board, Kerala, India.

COMPUTER KNOWLEDGE
Working knowledge in Windows 2000, MS Office & Autocad 2000, Primavera (P3)

CAREER SUMMARY
9½ years specialised experience in piping of Petrochemical plants, Refinery & LNG plant Planning, construction and shutdown field in all the phases. The experience includes 3 years in India, 3years in Kingdom of Saudi Arabia, 6 months in Qatar and 3 years in U.A.E

PROFESSIONAL KNOWLEDGE
- Preparation of isometric drawings
- Preparation of construction schedule
- Planning for manpower and construction equipment for piping
- Preparation of look ahead schedules
- Resources utilization analysis
- Planning and scheduling of piping fabrication and erection
- Fabrication and erection of all type of piping
- Fabrication and erection of pipe supports
- Fabrication and erection of steel structures
- Preparation of pre commissioning schedules
- Pre commissioning of piping system
- Knowledge of work permit, safe work practice and carrying out jobs in running plants
- Knowledge of hydro & pneumatic test
- Knowledge of cold & hot insulation
- Preparation of punch list
- Familiar with ASME Codes and all materials

EMPLOYMENT HISTORY

1) Organization: COSTAIN ABUDHABI COMPANY W.L.L.
Abu Dhabi (U.A.E.)
Projects: Abu Dhabi Gas Company (GASCO)
- LNG Train II overhaul 2005 (ADGAS)
- LNG Train I overhaul 2004 (ADGAS)
- LNG Train III overhaul 2003 (ADGAS)
- LNG Train II overhaul 2002 (ADGAS)
- Total ABK Export Line Project (ADMA)
- Margham Dubai Overhaul 2002
Period: From February 2002 to till date.
Position: Area Fab. / Piping Supervisor.

Responsibilities: Preparing bill of materials. Planning of piping jobs and executing the same during shutdown period. Preparation of isometric drawings and network data sheet for shutdown works. Planning for manpower and equipment. Preparation of QC documents and packages for testing. Attend daily, weekly and event driven meetings. Liaison with client and sub contractors. Providing feed back to sub contractors to achieve target. Completion of site works safely in scheduled time. Preparation and verification of as built drawing.

2) Organization: NASSER S. AL-HAJRI CORPORATION,
Qatar.
Project: QGPC Refinery Expansion Project (NODCO)
Client: LG Engineering and construction corp.
Period: From December 2000 to April 2001
Position: Pre commissioning Engineer

3) Organization: NASSER S. AL-HAJRI CORPORATION,
Kingdom Of Saudi Arabia.(K.S.A.)
Project: Arabian Petrochemical Company
(petrokemya-SABIC undertaken) at olefins III Project.
Client: Mitsui Engineering and shipbuilding Arabia Ltd.
Period: From August 2000 to December 2000
Position: Structural Engineer.

4) Organization: NASSER S. AL-HAJRI CORPORATION,
Kingdom Of Saudi Arabia. (K.S.A.)
Project: Saudi Aramco Shell Refinery
Company (SASREF) TGU/GT Project
Client: Foster Wheeler Arabia Ltd.
Period: From May 1999 to July 2000
Position: Piping Engineer.

5) Organization: NASSER S. AL-HAJRI CORPORATION,
Kingdom Of Saudi Arabia (K.S.A.)
Project: Saudi Iron and Stell Company Hadeed Flat
Product Facility Project
Client: Saudi Voest Alpine.
Period: From December 1998 to May 1999
Position: Piping Engineer.

6) Organization: NASSER S. AL-HAJRI CORPORATION,
Kingdom Of Saudi Arabia. (K.S.A.)
Project: From July 1998 to Nov 1998
Client: Saudi Formaldehyde Chemical Company Ltd
Period: From July1998 to November 1998
Position: Mechanical Engineer

7) Organization: M/S CRAFT ENGINNERING COSTRUCTION.
Project: I.P.C.L. Mumbai.
Client: Samsung Engineering.
Period: From December 1997 to June 1998
Position: Piping Supervisor.

8) Organization: M/S CRAFT ENGINNERING COSTRUCTION.
Project: Phinolex Resin Complex, Ratnagiri,Maharashtra
Client: L&T Group II.
Period: From May 1997 to November 1997
Position: Piping Supervisor.

9) Organization: M/S CRAFT ENGINNERING COSTRUCTION.
Project: Reliance Industries Ltd, Surat, Gujarat
Client: L&T ECC.
Period: From November 1996 to April 1997
Position: Piping Supervisor.

10) Organization: M/S CRAFT ENGINNERING COSTRUCTION.
Project: O.N.G.C. Hazira Project, Surat, Gujarat
Client: Daelim Engineering & Constructors
Period: From June 1995 to October 1996
Position: Piping Supervisor.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1951 to 2000 of 4766)

Go to Search Parameters...

Brief Description

I am looking to get on the job training to become a construction project Manager, I believe once trained I will make an outstanding Manager

An international, multi-lingual, technically proficient Sales & Marketing professional

I wish to apply for the post of Supervisor Warehouse /Material Specialist or (Buyer) Procurement.

I have 28 years experience in finance, project control, scheduling and material control working on DoD projects and private sector manufacturing companies in and out of the U.S.

Position as Electro-Mechanical Designer. Open to full-time regular employment or long-term contract arrangement. Extensive experience on CADAM, CADRA and CatiaV4. Also experience with CADEX-CCD and AutoCAD 3-D Solid Modeling. Over 25 years experience.

Microsoft project, scheduling, budgeting, estimating, superintendent background

Construction Manager - Worked as Architect, Interior Designer and Civil Engineer

Application for the Post of Structural Designer/Project Engineer for building structures in your esteemed Company or for any position applicable to my qualifications.

Iam a diploma holder in Mechanical engineering with knowledge in autocad, Pro-e. Working as supervisor , engaged in fabrication & erection of pipelines.

Training and Supervision of Technicians, Quality Control, Sudying Chemical Engineering - Dipolma level, Soil, Asphalt and Concrete Testing (Lab and Field)

Certified Project Management Professional (PMP from PMI, USA) has extensive experience in technical, commercial and quality management aspects of the construction projects.

Diploma of associate engineer

Diploma Civil Engineering

AutoCAD Operator

I have a degree in Mechanical Engineering and a Post Graduate Diploma in Business Studies. I have attainded courses in Health Safety & Environment , Sales/Princples & Strategies etc. I have also worked as a Sales Engineer and Area Sales Engineer respectively. Proficent in use of micro soft office

I was graduated in Bachelor of Science in Mechanical Engineering and my work experiences was in the field of QA/QC in construction of district cooling plant with two years in refinery construction and currently working as a Mechanical Inspector in a consulting firm.

Journeyman I & E Technician: Plant-wide installation, start-up, loop check, calibration, troubleshooting, repair, and maintenance of instrumentation and electrical systems on high pressure gas-fired boilers (produce 250lb. & 900lb. steam flow), turbo-blowers, and water-treatment facilities.

Mr. Papanna has more than 5 years diversified engineering experience in the process, petrochemical and power industries. These duties included developing specifications and requisitioning equipment, performing technical evaluations and making recommendations for purchase, and specifying all testing

•Awarded department fellowship to pursue graduate studies. •Secured fourth place in undergraduate engineering. •Skilled in working with IMEX (CMG's reservoir simulator) and E100 (Eclipse simulator). •Received four promotions in a span of three years. •Prepared pipelay/installation reports

I am holding B. Sc in Quantity Surveying from University of Moratuwa, Sri Lanka. I have over eight years employment in the construction industry as a Quantity Surveyor. Employed by International Contractors

Have experience Road Design, MXROAD Software and AutoCAD Software. Total experience 7 Years 11 months in Road Department.

Monitoring and Scheduling the Projects

I have Diploma in industrial safety ASNT LAVEL II RT UT 3. QMS ISO 9001-2000 Internal Auditor Course BY TUV India Pvt Ltd and having a nine years experince in construction civil as well as mechnical five years with thired party inspection agency

Mechanical Subjects Lecturer & Senior Engineer in an Industrial & Commertial Projects

Power Plant Mechanical Engineer / Site Supervision of Mech. Work & Commissioning

Manufacturing Engineering Expert with 8 years of Experience in Tooling / Manufacturing Arena, Post Graduate in Mechanical Engineering & Management

Maintenance, Computer Hardware, Calibration,

Knowledge of design and analysis of steel and concrete structures. Special knowledge of finite element analysis(GTSTRUDL/SAP2000). Experience with all phases of building projects from drafting and design to execution and inspection.

PLANNING , MOETHODS MAINTENANCE ENGINEER

Qualification : Diploma in Civil Engineering, Professional Skills : Planning & execution of works as per the drawings & client/company’s requirement. Quantity Surveying, Billing, Man Management, Material Procurement, Labour control & over all Supervision of work.

Health & Safety Inspections (OSHA, MSDS)

15 Years experience in Construction and Mining. Qualified Diesel Mechanic with Supervisor and Foreman skills.

Having more than 8 years of extensive professional experience in project management, construction supervision of internationally aided highway projects including major and minor bridges, cross drainage structural works, assuring the quality of construction as per the approved drawing etc

Fresh Graduate Quantity Surveyor

I am a self motivated industrious candidate and also a fresh graduate from Sheffield Hallam University and graduate with the course of (Bsc. Hon) Building Construction Management, I¡¯m seeking for job placement with the post of Project Executive.

Pipe design, P&IDs and autocad

Experienced domestic and international project manager. Well versed in project management and cost management best practices coupled with delivering successful project and software implementations.

I am a licensed land surveyor in the Philippines. I was able to practise my profession for 2 years and 11 months. My experience enhanced the knowledge and skills i learned from my university. I worked well with people and enjoyed getting the work at hand completed.

Pro-active, excellent communication skills, adaptable and confident I am an experienced and motivated team player looking for an opportunity in an international project.

Electronics engineer with 6 yrs exp.

I am looking for a position in the crane and rigging field.

AutoCAD Designer - Architectural/Structural: Specialist for 2D/Advanced 3D Modeling & Rendering w/ AutoCAD 2007, 2D/Advanced surface & 3D Modeling w/ Mechanical Desktop 2005; Planning and Scheduling w/ Primavera Project Planner, User of Windows XP and NT + Microsoft Office applications

9½ years specialised experience in piping of Petrochemical plants, Refinery & LNG plant Planning, construction and shutdown field in all the phases. The experience includes 3 years in India, 3years in Kingdom of Saudi Arabia, 6 months in Qatar and 3 years in U.A.E

Seeking a challenging assignment as an HVAC Site Engineer/Supervisor, HVAC Draughtsman, Materials Inspection/Material Handling Engineer - have six years working experience in H.V.A.C Industry. Have good communication skills and eager to take up any new challenges.

Professtional for use survey instument

IT Application Support Technician

Civil Site Engineer / Civil Inspector ; Field of Experience:: Onshore Plant, Multistory Building, Shopping Complex, Residential Villas and Landscaping Works, Water & Sewage Pipelines; Qualification:: Diploma in Civil Engineering (1995- 1998); Diploma in Auto CAD 2000, 2D & 3D, Windows, MS Office

Ability to perform Instrumentation Installation, Maintenance, Commissioning & Inspections

11 years expereince in microstation

Marketing, Marketing Research, International Economics, Data Entry, Entrepreneurship development.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 [ 40 ] 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out