Resume - AutoCAD Designer - Architectural/Structural: Specialist for 2D/Advanced 3D Model...

Misco Jobs

Resume #33853

CONTACT INFORMATION:
View contact information...

OBJECTIVE
To work in an environment where there's an opportunity for growth and advancement especially in the field of Architecture and Engineering.

QUALIFICATION SUMMARY
- Senior AutoCAD Designer (Structural) Mar. 2006 to present
COWI A/S
Doha, State of Qatar
- Senior AutoCAD Designer (Structural) Sep. 2003 - Dec. 2005
Archirodon Construction (Overseas) Co. S.A.
Abu Dhabi, United Arab Emirates
Abu Dhabi United Arab Emirates
- AutoCAD Designer / Asst. Planner Sep. 2001 - Aug. 2003
ABV Rock Group KB, Site 7
Medina Kingdom of Saudi Arabia
- Senior Draftsman / Asst. Planner Oct. 1994 - Oct. 1999
ABV Rock Group KB, Site 1 & 6
Riyadh Kingdom of Saudi Arabia
- Senior Draftsman / AutoCAD Operator Oct. 1992 - Oct. 1994
ABV Rock Group KB, Site 1 & 6
Riyadh Kingdom of Saudi Arabia
- Draftsman Apr. 1990 - May 1992
UNIFAB Factory Company
Riyadh Kingdom of Saudi Arabia

WORK EXPERIENCES

(A)
POSITION:
Senior AutoCAD Designer (Structural)
Company: COWI A/S
Doha, State of Qatar
Consultant for the projects of QATAR PETROLEUM (QP):
- 10.38 Pearl Marinas
- 10.37 Gabbro Berth Expansion, Mesaieed
- 10.49 New Doha Port
- 10.50 Lusail Development, Infrastructure

Period: Mar. 2006 to present
Preparing the complete design drawings of the following structures:
- Breakwater
- Quay Walls and Capping Block
- Block Walls
- Berth Platforms and R.C. Piles
- Marina and Pontoons
- Land Bollards and Fenders
- Mooring
3D Solid modeling (as designs mentioned above)
Structural detailing (as structures mentioned above)
Survey setting out points / plotting / extracting of coordinates in the specific areas (for boreholes / topography / bathymetry / dredging).
BOQ of concrete, steel and reinforcement bars.
Drawings and technical document control.

(B)
Position: AutoCAD Designer / Asst. Planner
Company: Archirodon Construction (Overseas) Co. S.A. P. O. Box 28669 Abu Dhabi United Arab Emirates PROJECT: Shaikh Zayed Bridge for Abu Dhabi Island Contract 3
Consultant: HI-POINT RENDEL (Rendel Palmer & Tritton)
Architect: Zaha Hadid
Period: Sep. 2003 to present
Job Description: Technical/Engineering/Detailing
- Preparing the design drawings from temporary to permanent works based on the "Work Breakdown Structure" and "Area Codes Layout" of the Shaikh Zayed Bridge. Such as: - Cofferdams and Pile Layout - Pile Caps and Piers - Deck support and Deck - Abutments and Arches
- 3D Solid modeling of the different geometry of Shaikh Zayed Bridge.
- Detailing of formworks panel, tie rods and cross-truss bracing. Structural and reinforcement works.
- Survey layout, plotting of coordinates and bearings in the areas covered by Shaikh Zayed Bridge. Planning & Cost control
- Assist the Planner in updating and scheduling the planned "Work Breakdown Structure" Primavera file based on the activities and progress of civil, steel and installation works of the Shaikh Zayed Bridge.
- Quantity estimates and material take off.
- Routine field monitoring.

(C)
Position: AutoCAD Designer / Asst. Planner
Company: ABV Rock Group KB, Riyadh, Kingdom of Saudi Arabia
Project: Saudi Strategic Storage Plant (Underground Oil Depots & Pipeline) PHO, CHO - Riyadh, KSA Site 1 - Riyadh, KSA Site 3 - Buraidah, KSA Site 5 - Jeddah, KSA Site 6 - Abha, KSA Site 7 - Madina. KSA Site 8 - Riyadh, KSA
Consultants: JACOBSON & WIDMARK FOSTER WHEELER SNAMPROGETTI
Period: Oct. 1992 to Oct. 1999 Sep. 2001 to Aug. 2003
Job Description: Technical/Engineering
- Preparing the design drawings based on the "Work Breakdown Structure" and "Area Codes Layout" of the Storage Plant and Pipeline from tunnel excavations to building structures, finishing works and access roads.
- Shop drawings and detailing the architectural, structural and utility systems of all structures and other facilities inside and outside of the Storage Plant and Pipeline area.
- Survey layout, setting out of coordinates and bearings in various fields of Cavern area, Off-cavern and Pipelines.
- Presentation of rendered 3D Models of accomplished project structures which shown to the consultant and client during progress update. (Taking pictures of the structures is forbidden).
- Making "As-built" in revision of affected designs in some areas of the Storage Plant and Pipeline where already completed.
- Controlling of drawings, operating manual, technical specifications and other related documents. Planning & Cost control
- Assist the Senior Planner in updating and scheduling the planned "Work Breakdown Structure" Primavera file based on the activities and progress of civil, steel and installation works of the Storage Plant and Pipeline area.
- Updating the weekly and monthly progress for cost and billing report
- Monthly cost unallocation earned values and forecast by using PRECO application.
- Quantity estimates and material take off.
- Routine field monitoring.

(C)
Position: Draftsman
Company: UNIFAB Factory Company P. O. Box 40602 Riyadh 11511 Kingdom of Saudi Arabia Project: Pre-fab Units & Porta Cabins (ABV Rock Group & MODA Projects) PERIOD: Apr. 1990 to May 1992
Job Description:
- Designing and drafting of architectural, structural, electrical and utility systems of Pre-fabricated units such as: - Site Labor Accommodations - Site Office - Site Mosques - Site Messhall and Kitchen - Site Recreations - Side Ablutions and Laundry
- Part-timely supervising in the field for construction of foundations and other support system utilities in erecting, placing the pre-fab units at site.
- Quantity estimates and material take off.
- Controlling of drawings, operating manual, technical specifications and other related documents.

SKILLS
- 2D/Advanced 3D Modeling & Rendering w/ AutoCAD 2005
- 2D/Advanced surface & 3D Modeling w/ Mechanical Desktop 2004
- Material descriptions and extract different 3D sections/views w/ Smart Plant Review applications
- Planning and Scheduling w/ Primavera Project Planner
- User of Windows XP and NT + Microsoft Office applications
- Knowledge of Disk Operating System (DOS)
- Knowledge of Software installation & PC troubleshooting

TRAININGS
- Mechanical Desktop 2004 Jun 2004 Abu Dhabi, UAE
- Advance Primavera Project Planner Course May 1998 Abha, KSA
- Basic Primavera Project Planner Course Nov. 1997 Riyadh, KSA
- Smart Plant Review Mar. 2002 Madina, KSA
- Safety Induction Course Oct. 1992 Riyadh, KSA
- Basic AutoCAD Jun 1992 Manila, Phils.
- Disk Operating System (DOS) Jun 1992 Manila, Phils.

EDUCATIONAL BACKGROUND
- Bachelor of Science in Architecture Year Graduated: 1989
University of San Agustin
Iloilo City, Philippines

DIPLOMA, CERTIFICATE & LICENSES
- Employment Certificates
- Bachelor of Science in Architecture Diploma
- Mechanical Desktop 2004 Certificate
- Basic AutoCAD Certificate
- Smart Plant Review Certificate
- Disk Operating System (DOS) Certificate
- Primavera Project Planner Certificate
- Architectural Draftsman Certificate
- Building Construction Technician Certificate
- POEA/OWWA Identification Card
- Philippine Driving License
- Saudi Driving License

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1601 to 1650 of 4371)

Go to Search Parameters...

Brief Description

Proficient in drafting submittals (2D & 3D) and/or shop drawings prior for construction up to As-built Drawing. Multi-disciplined: Architectural, Structural, Mechanical (including Plumbing & Piping, HVAC, and Fire Fighting), Electrical (including Lighting, Grounding, Telephone & Data, Fire Alarm, a

About eight years of solid experience in designing and implementation(execution) of structural works

Reviewing the scope of work & technical specifications, checking detail projects schedule plan for construction and delivery of equipment, analyzing the projects progress and monitor the site progress and look after the safety and quality issues and more.

A 34 year old project manager with 14 years experience in mechanical, industrial and commercial projects. 15 years experience in all realms of contract engineering & QA/QC. Overseeing projects up to 36 million dollars. Project estimations.

Experience in Construction of Power House, Highway Roads, High-rise Buildings, Canals, Air Ports, Aero Bridge ,Delhi Metro Rail, Commercial and Residential Multi Story Buildings ,Water Tank, Guest House , Domes. Familiar with ISO 9001,ISO 14001 and Safety systems.

30 year old dynamic electrical power systems engineer available for immediate relocation.

Worked as an Auto Diesel Mechanic over four years, which included supervises the troubleshooting and replacing of major components i.e., engines, transfers and transmissions. Operated vehicles weighing over 3 tons. Able to type 33 words per minute.

Recently I have completed a BSc. in Mechanical Engineering at the Near East University, graduating in 2008, Cyprus.

Rig electrician/ technician

Fresh Graduate. Civil Engineer. Interested in construction management and structural enginnering.

Proe, autocad.

Licensed Master Electrician, Licensed Electrical Contractor. 20 plus Industrial experience. Factory moving and inital setup experience seeking next project.

analyze and making risk assesstment. trained the workers for safety works and making safety reports.

Free! An international, multi-lingual, technically proficient Sales & Marketing professional

Senior management consultant with 15+ years of progressive experience and with a results-driven approach for project and program management, including the use of first-rate skills in directing full cycles for high profile, multisite, international programs and initiatives.

I wish to apply for the post of Supervisor Warehouse /Material Specialist or (Buyer) Procurement.

To obtain a professional career in a challenging environment and be able to contribute my knowledge and be able to gain experience in a fast growing industry.

Reinforced Concrete, Steelwork, Structural Timber, 3D structural Modelling

Chemical Process Engineer,Simulation Design, Process Control Automation,Project Development-Conceptual,Feasibility,FEED,Project Mgr,Coordination_EPC,PMC,Licensor,investors;techno economic financial analysis,Mid Downstream Refining, Petrochemicals,Gas Processing/Treatment,Q-HSE,Business Head (P&L)

Microsoft project, scheduling, budgeting, estimating, superintendent background

Construction Manager - Worked as Architect, Interior Designer and Civil Engineer

Application for the Post of Structural Designer/Project Engineer for building structures in your esteemed Company or for any position applicable to my qualifications.

Senior Level Assignments in the realms of Procurement / Documentation with a reputed organisation

AutoCAD Operator

16 years in Planning/Scheduling/Project Controls for Power/Waste Water/Mining & Metals/Oil, Gas and Petrochemicals projects from concept to commissioning, particularly in multinational, multi cultural and consortium environment in India, Indonesia, Saudi Arabia, USA, Singapore, Bahrain and Canada

Having 11+ years professional experience in the EPC Contract for turnkey Projects handling Installation of Instrumentation and Industrial Process Control Systems in both green field and brown field area in India & Middle East, gaining experience ranges from Site Management & Administration

Specialized in the Hydrographic Survey, Topographic Survey, GPS / Total Station Survey, Dredging and Off Shore Construction Survey, GIS and CAD data integration, Data Processing and fair sheet production.

I am holding B. Sc in Quantity Surveying from University of Moratuwa, Sri Lanka. I have over eight years employment in the construction industry as a Quantity Surveyor. Employed by International Contractors

Have experience Road Design, MXROAD Software and AutoCAD Software. Total experience 7 Years 11 months in Road Department.

Monitoring and Scheduling the Projects

I have Diploma in industrial safety ASNT LAVEL II RT UT 3. QMS ISO 9001-2000 Internal Auditor Course BY TUV India Pvt Ltd and having a nine years experince in construction civil as well as mechnical five years with thired party inspection agency

Mechanical Subjects Lecturer & Senior Engineer in an Industrial & Commertial Projects

Power Plant Mechanical Engineer / Site Supervision of Mech. Work & Commissioning

Manufacturing Engineering Expert with 8 years of Experience in Tooling / Manufacturing Arena, Post Graduate in Mechanical Engineering & Management

Maintenance, Computer Hardware, Calibration,

Knowledge of design and analysis of steel and concrete structures. Special knowledge of finite element analysis(GTSTRUDL/SAP2000). Experience with all phases of building projects from drafting and design to execution and inspection.

Over 7 years of overall experience

B.E MECHANICAL(2007/76%/Skills in-AutoCAD,Pro-E,catia-V5,very good seminar & demonstrative

005- April 2008. Bachelor of Geomatic Engineering, :Industry training for 6 months in Jurukur Titiwangsa Temerloh Pahang .Learn more about Software’s (AutoCAD, CDS,MAPINFO and TRPS). Work as draught man after industry training for 3 months.

.E Electronics & Communication,

Having more than 8 years of extensive professional experience in project management, construction supervision of internationally aided highway projects including major and minor bridges, cross drainage structural works, assuring the quality of construction as per the approved drawing etc

creative thinking and good communication skills thats makes me successfull mechanical engg. always keen to apply these qualities to increase companies production and achiveing goal.

I AM IN SEARCH OF MECHANICAL ENGINEERING JOB IN PRODUCTION FIELD

Licensed civil engineer and one year contstruction experience

I am a licensed land surveyor in the Philippines. I was able to practise my profession for 2 years and 11 months. My experience enhanced the knowledge and skills i learned from my university. I worked well with people and enjoyed getting the work at hand completed.

MEP Planning Engineer with 2 years of experience in MEP Works in High Rise Construction Buildings

Pro-active, excellent communication skills, adaptable and confident I am an experienced and motivated team player looking for an opportunity in an international project.

Electronics engineer with 6 yrs exp.

AutoCAD Designer - Architectural/Structural: Specialist for 2D/Advanced 3D Modeling & Rendering w/ AutoCAD 2007, 2D/Advanced surface & 3D Modeling w/ Mechanical Desktop 2005; Planning and Scheduling w/ Primavera Project Planner, User of Windows XP and NT + Microsoft Office applications

I have over 30 years of heavy equipment experience, including Dragline, dozer, loader, scraper, etc.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 [ 33 ] 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out