Resume - I Am A Mechanical Engineering Graduate Passed Out In 2004. Right Now I Am Doing ...

Misco Jobs

Resume #34080

CONTACT INFORMATION:
View contact information...

A confident communicator, I integrate easily into teams, though I am equally happy to work alone. I am a quick learner, logical thinker with an analytical mind and enjoy the stimulation of a challenge. I like variety and am adaptable in different situations, to which respond with enthusiasm and a sense of humor. I am computer literate and am always keen to learn something new.

PROFESSIONAL QUALIFICATION
* July 2005(Till date): Pursuing one-year full time PG Course in Computational Engineering from School of Advance Engineering &Information Technology
(A MoU between IIT M, Chennai & BHEL, Tirchy)
www.saeit-tiruchi.com

* August 2004: B.Tech in Mechanical Engineering from J.M.I, New Delhi,
Aggregate 79.89%. Division 1st.
Secured First position in the class of sixty students.
http://jmi.nic.in/

EDUCATIONAL QUALIFICATIONS:
* June 2000: Senior Secondary School Examination from AMU, Aligarh,
Aggregate 64.8% Division 1st.

* June 1997: Secondary School Examination from Zila School, Muzaffar Pur
Aggregate 63.86%. Division 1st.

EXPERIENCE:
Worked in TRACTORS INDIA Ltd., Kolkata, as a Management Trainee. First two months of training was self-learning process consisting of basic automotive knowledge (e.g. Engine, Transmission, Hydraulic Systems, Electrical & Electronic Systems, Differential, & Pneumatic Systems), Earthmoving Concepts, Equipment selection, Genset selection, and Crane & Reachstacker selection. Then posted in Plant in Design & Engineering Department. Done stability check calculation for different models of crane. Worked on ANSYS 6.1 for analysis of crane components.
www.til-ltd.com

Project Work: Final year B.Tech Finite Element Modeling For The Modal Analysis Of T6 Turbine Blade Using ANSYS
In the present work, the Modal Analysis of a T6 Turbine Blade is carried out by developing a finite element model using ANSYS. This analysis is required in determining the feasibility of a turbine blade under operating conditions. The first twenty natural frequencies and respective mode shapes are determined by the most accurate, reliable and fast analysis software. These results are then compared with those obtained by the analytical method. The animated views of Turbine blade for all the mode shapes were generated using the software. An effort has been made to identify the most critical mode in terms of deflection that may hinder the normal operational use of the turbine. The stresses at the different nodes were also determined to identify the critical regions in all the modes of vibration and to the most critical mode shape in terms of stress levels.

AWARD:
2004 Got Jamia Merit scholarship for 1st Position in B.Tech (Final)
2004 Got Jamia Teachers Association scholarship
2003 Got Jamia Merit scholarship for 1st Position in B.Tech (3rd Yr)
2003 GATE 2003 percentile score 90.44
2002 Got Jamia Merit scholarship for 1st Position in B.Tech (2nd Yr)
2002-04 Got Merit scholarship from Foundation for Social Care

EXTRA CURRICULAR ACTIVITIES:
2002-04 Chairperson of SAE Jamia Collegiate Club
2001-02 Program Chairperson of SAE Jamia Collegiate Club
2000-04 Active member of ISTE Jamia chapter
2000-04 Played in Inter class Cricket Tournaments

SKILL:
Modeling: Pro/E Wildfire 2.0, CATIA V5 R13,
Analysis: ANSYS 6.1, ABAQUS 6.4-1, CAESAR II 4.5,
Drafting: Auto CAD 2000
Language: C, C++
Operating: Windows 2000

REFERENCES:
Available upon request

MEMBERSHIP:
- American Society of Mechanical Engineers
- Society of Automotive Engineers
- American Society of Civil Engineers
- American Association for Advancement of Science

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4651 to 4700 of 4774)

Go to Search Parameters...

Brief Description

Mine surveyor, several years experience surveying underground and surface

I Am A Mechanical Engineering Graduate Passed Out In 2004. Right Now I Am Doing My Pg In Computational Engineering. I Know Multiple Softwares Like Ansys, Catia, Pro E, Abaqus, Caesar, CFX, C, C++, AUTO CAD etc.

Hello my name is Jonathan Gaydos and thanks for takeing the time to read my resume,I have experience on many types of equipment from very small cats & hoes right up to some of the largest mining equipment in the world.I am also used to working in remote locations.

Mechanical Drafter ( Auto Cad Operator)

GOOD COMMUNICATIONAL SKILL WITH GREAT KNOWLEDGE IN MANAGEMENT IN SAFETY

Proven capabilities in HSE supervision and training: this includes heavy construction, onshore & offshore drilling and diving with an assertive personality sensitive to multicultural & multi-national environments with the ability to work and train workforces in remote and harsh environments.

IT expert, Helpdesk Support, Server Administration, IT Manager

DDC & HVAC CONTROLS,

Commission of new diesel and electric fire pumps per NFPA 20

BSc Electrical Engineer; PLC Programmer, Maintenance Engineer, Production Manager

MBA Industrial Managemant, MSc Engineering and Graduate in Mechanical engineering, Experience in CAD/CAE - Finite Element Analysis and Modeling using MSC Nastran, Patran and Hypermesh

8 yrs. experience in training function. Key Skills: Electrical - Switchgear

Ultrasonic testing, radiographic interpreter, magnetic particle testing, dye penetration testing

I am an enthusiastic and hard working high school and college graduate who is keen to find employment. I am reliable, trustworthy and meticulous. I have obtained a certificate for a science fare we had during my Matric year which was a group effort (3 members) of which we were selected for the no. 2

Heavy Equipment Operator with 2 years exp. - Floorman/Roughneck on Oil Rig

Maintenance professional, Electrician, Steam, Safety, Instumentation, multi-skilled

Accountancy Honours & Honours diploma in Network centered computing

maintenance foreman, equipment operator, safety enviromental compliance, forklift, loader, completion fluids

General computer repair, uasage, modification skills.

I have all my safety tickets, and heavy equipment operators ticket.

Engineer seeking Challenging job

I am a Geologist with 5 years of experience in one of the Asia's best exploration and production petroleum company - ONGC. I am willing to relocate and have an ability to work for the organisation with full efforts.

Information Technology, IT Operations & Implementations Regional Manager

Experinced Pre-commissioning, Commissioning, Completions and Handover Coordination. Additional experience in Human Resources.

Accounting, management. I am fluent in English both spoken and written. I am mature, attractive, dynamic, highly motivated to work hard in getting good results, willing to work as a team, creative individual, who will try to do the best for development and growth of the company.

I am a material planning professional with extensive experience in Production Planning, Scheduling, Inventory and Materials control, Document controlling and Purchasing.

As listed on my resume I have experience in landfill remediation and operation, groundwater quality analysis, groundwater sampling, oversight, knowledge of environmental regulations and investigations, plan and report preparation and experience in performing site investigations to assess hydro-geolo

Entry-level mechanical engineering

Landman/Paralegal/Marine Seeks Employment

11 years experience in running met Labs and Labs and supervising them as well

B.E, Electronics and Instrumentation (2006) with 70 %. I am very much interested to make a good career with your esteemed organization. I did DCS, PLC & SCADA training from JRD TATA AUTOMATION CENTER & HONEYWELL, Pune. But willing to work on any technology.

FAA airframe and powerplant certified, BS and AS in Aviation Maintenance Science / Management AOC

Photogrammetry Sr. Cad Production Executive

A competent supervisor and skilled technician seeks a challenging career opportunity in Maintenance/Machining/Welding/Fabrication or in a related Management field

Project Geophysicist (Mineral Exploration)

Motivated, results-driven professional with 7 years experience in warehousing.

I am a qualified and experienced safety professional/officer.

Competent Instruments/Production Technician

An energetic, pro-active Human Resource Generalist with expertise in all human resources functions and skills in recruitment, relocation, immigration, employee relations, team leadership, facilitation and training. Fluent in English, Dutch, German and (elementary) French

Class A CDL, railroad equipment ie. spotter truck tandem dump truck, front end loader, fork lift, assorted types, sizes and hp tractors & mowers, snow removal, emergency & on call & work in extreme and inclement weather conditions, wiring, installation & preliminary programming of traffic signals.

Electrical engineer with 3 years experience including power distribution and telecom industries.

I am a student of Physics in the third year of my bachelors degree, I have work experience in Geophysical data collection, Construction, and data processing. I have done Karate since I was 6, and I was the captain of the hockey team in highschool. I love a challenge.

Bilingual Entry Level I&C Engineer

Implementation of H.S.E. policies on and off project sites, Knowledge of fire prevention and safety practices, Field sampling for all Environmental studies, ability to make accident investigations and prepare reports, good administrative & Environmental quality management skill, good teamwork spirit

Help me to be part of workers in your establishmnet

Field engineer

Experienced in purchasing, buying, and expediting

Knowledge in repairing computer hardware and other components of the computer. Reprogram operating system of computers if required. Installing software’s needed by the computer. Troubleshooting computer problems.

Geological engineering technologist diploma from Cambrian College, Sudbury.

Civil Engineering Technologist with gas pipeline experience, including construction, cathodic protection and supervision. 3 years Maintenance Planner experience in the Pulp & Paper industry. Very familiar with rotating equipment, SAP, AS400, and EMPAC. Very reliable and efficient

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 [ 94 ] 95 96 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out